OIL AND STAIN SPREADING MACHINE

FOR PARQUET PRODUCTION

COSMA SPREADING OIL AND STAIN

Cosma’s purpose-built machines spread the oil

and stain evenly across the surface of the wood.

The padbrush and cylindrical brush absorb any

excess material to ensure that the correct

amount is applied. Surface texture, desired color

and (protective) layer thickness play an

important role in achieving the required result.

For structured wooden floors, Cosma has

developed the padbrush which ensures that the

oil penetrates deep into the wood.

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTION

COSMA CYLINDRICAL & PAD BRUSHES

FOR PARQUET FINISHING MACHINES

In the production of products such as wooden

floors or stairs, oil is applied with a roller coater.

The pad and cylindrical brushes (made of a

combination of natural fibers and synthetic

filaments) spread the oil evenly over the surface.

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTION

COSMA PADBRUSHES FOR PARQUET

FINISHING MACHINES

Specially developed for spreading oil on

distressed wooden floorings. Due to the special

mix of nylon filaments and natural fibers the

padbrushes achieve a much better spreading

and penetration of the oil into the wood.

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTION

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTIONTraditional pads vs. Cosma padbrushes

THE ADVANTAGES

✓ Get an excellent and better-looking finish

on your wooden floorings and parquet

✓ Modular concept: you can add it to your

production line or replace your current unit

✓ The brushes assure an even finish allover

with just one-way through with the right

amount of oil, thus reducing oil waste

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTION

COST SAVING & SUSTAINABILITY

✓ Re-use the Cosma brushes over-and-over

with the Cosma Brush Cleaning unit

✓ Eliminate the purchase of replacement pads

✓ Reduce the large amount of garbage waste

caused by the used pads

✓ Padbrushes last up to 300 times longer than

traditional pads

✓ Less transport costs

✓ The cylindrical brushes and

padbrushes work also with

renewable natural fibers

from an agave plant whilst

traditional pads are

completely produced from

synthetic material

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTION

MAKE THE INVESTMENT TODAY AND

SAVE COSTS IN THE FUTURE!

Ask us about the full production line for

parquet and wooden floorings!

MACHINE

TECHNOLOGY

FOR PARQUET

PRODUCTION

ABOUT COSMA

Since 1948 Cosma – Borstelfabriek Holland has

been developing and manufacturing brushes for

the full range of industrial surface treatments for

wood, plastic and metal. Today, the third

generation is at the helm of this family business.

NOT JUST MACHINES, BRUSHES TOO

We offer a range of modular machines and

specialist brushes which can process any product

down to the finest detail. All our machines and

brushes can be customized to suit your specific

requirements. Contact us for more information.

C O NTACT I N FOR M ATION

C a l l u s : + 3 1 ( 0 ) 4 9 5 5 3 2 3 5 4

M a i l u s : i n f o @ c o s m a . n l

V i s i t u s :

C o s m a - B o r s t e l f a b r i e k H o l l a n d B V

F a h r e n h e i t s t r a a t 8 a

6 0 0 3 D C W e e r t - N L

www.cosma.nl