LEDLightboxes
The most technologically advanced LED lightboxes created for maximum impact.
powered by
Why specify LED lightboxes?
Lightboxes have proven to be a particularly effective way to increase visibility and captivate consumer attention.
Generate sales & improve brand awareness
Research suggests that illuminated graphics can increase sales by approximately 30%. In the first instance a lightbox will attract attention,
due to the brightness in contrast to its surroundings. Once the consumers focus has been commandeered the lightbox will efficiently deliver both direct and subliminal messaging perhaps about a specific product promotion or perhaps to assist in conveying the brand DNA.
Increase Footfall
Most retailers use illuminated displays in shop windows to rapidly convey messaging whilst adding some visual excitement to lure
customers in and ultimately increase footfall.
Create ambience
As well as all this, lightboxes by their nature add to the ambience of the interior, and with the integration of dimming systems together
with the opportunity to specify LEDs in specific colour temperatures that compliment the surrounding scheme, lightboxes have become a
welcome addition to many sectors, including hospitality, commercial and leisure, for their ability to adapt to the environment by simply and easily
changing the graphics.
Make an impact!
At Unibox we have developed a range of lightboxes to suit our diverse clients’ needs, from ultra slim and compact to large format lightboxes
that can measure as large as 50 metres!
Profiles & Modularity
The most technologically advanced LED Lightbox
displays on the market
Our LED illumination goes beyond putting a light behind a graphic.
We closely control the manufacture of every element within our Lightboxes, ensuring critical
considerations such as heat dissipation, flux binning, colour temperature and much more
are managed effectively, resulting in a display that creates maximum visual impact whilst providing longevity and high performance.
Lightbox Types
Our extensive range of lightboxes allow us to put forward the right product for the job in hand. The selection process is dependent on the application and the criteria set by our clients, which is why we have spent time developing various ways to fit
each and every brief, without compromising on quality.
BacklitOur backlit lightboxes are
available with a variety of LED options mounted the the back
panel, which are specified depending on a few factors
including light output required and power consumption .
Edge LitCreated using our in-house laser-etching machine, each Light Guide Plate (LGP) we
create features a custom algorithmically-controlled dot
pattern, resulting in optimal light output, and even distribution, at
incredibly thin depths.
Side-FireIntegrated into a Lightbox’s interior channel, high power side-fire LEDs fitted with an optic lens that project light
further and focus light evenly across graphics, whilst providing the ability to flat-pack the entire
display as there is no back-panel.
VideoUtilising individually addressable
LEDs within close proximity of one another allows for the
creation of stunning illuminated displays that can change colour,
pulsate, and display custom video content.
LED Options
As a UK-based manufacturer of modular LED lighting solutions, we are able to produce lightboxes specifically designed to meet the needs of the project in hand. Our lightboxes can be made with a
variety of LED light engines, whether that be utilising a standard flexible PCB or a custom designed rigid PCB, our experts are on hand to talk you through the optimum solution.
(See our matrix on pg 11 to see which LED options are compatible with the different lightbox types).
Eco
Our 12V 2.4W per m flexible PCB is our most economic light engine option. With 30 LEDs per m, it is available as standard in 6500k, other colour
temperatures by request, and has a CRI of 80.
Eco+
Our 12V 4.8W per m flexible PCB is a cost-effective solution for back-lit lightboxes requiring a higher light output than the Eco. With 60 LEDs per m, it is available as standard in 6500k, other colour temperatures by request, and has a CRI of 80. Eco+ can be used for
window displays, where higher impact is required.
Eco Power
Eco Power provides the highest output of our flexible PCBs for backlit lightboxes. It is populated with 120 LEDs per m and has a power consumption of 9.6W/m. Eco Power is best suited for applications that require greater impact such as window displays. Available as standard in 6500k, other colour
temperatures by request, it has a CRI of 80.
OptiForm BL
A 24V 15W/m rigid PCB designed by Lumenal for use in our back-lit lightboxes, using optics together with high power LEDs to spread the light wider so that less LEDs are required – only 9 LEDs per meter. Fully dimmable, so brightness and power consumptions can be tailored to suit the application. Available in 6500K as standard with a CRI of 80. This rigid PCB has been designed to enable our lightboxes to be flat-packed for cost-effective
distribution.
OptiForm SF
Developed by Lumenal specifically for use in our double sided Ledge 105 lightbox. This PCB is populated with 10 high output LEDs per m, 5700k and CRI 80 as standard. Each diode is fitted with an optic to project the light and enable even distribution across
the space between graphics.
Edge PCB
At Lumenal (sister company to Unibox) we design and develop our own 24V PCBs for use specifically within our edge-lit lightboxes. This range of PCBs is populated with 126 diodes per m, colour temperature 5700k as standard with a CRI of 80. Depending on the size and level of light output required, a light guide plate will be lit along one or two edges with this
style of PCB.
Eco Edge
Eco Edge is a flexible PCB used in some of our edge-lit lightboxes, specifically Ledge 22 and Ledge 50. Due to its application, it is a high power option with 120 LEDs per meter and with a power consumption of 19.2W/m. Available in CRI 80 and 6000K as standard, although other colour temperatures are
available on request.
Our Finishes
Our aluminium profiles are manufactured with an anodised silver finish already applied. Although this is popular with alot of our clients, we prefer not to be constrained by ‘standard’ finishes. In fact, we have perfected a vast range of finishes that provide various visual aesthetics and are immediately available for manufacture. Just speak to us for a full run-through of what’s available.
Bronze Anodised Gold Anodised Antique Copper Plated
Silver Anodised (as standard) White Powder CoatBlack Powder Coat
Polished or Brushed Brass Plated Polished or Brushed Chrome Plated Polished or Brushed Copper Plated
Straight Grain_Grey Straight Grain_Light Timber-Effect Powder Coat_Dark
Blackened Steel Galvanised Steel Concrete Wrap
Custom Finishes
We’ve been working hard on our finishes to make sure that we can offer our clients a wide range that are inherently eco-friendly. We use aluminium profile for a number of reasons, including for it’s recyclable properties. We can match almost any design or desired effect to an aluminium profile, using a unique process of sublimation printing, which creates an incredibly authentic appearance.
We can now achieve an extremly detailed timber grain finish without cutting down any trees!
Combining a texture, base colour and a custom laminate, which is heat transferred directly onto the aluminium profile, these effects are baked directly to the metal, meaning they’re as hard-wearing
as the aluminium itself.
Magnetik Display System
In spaces large & small, maximising sales, footfall, or awareness, is always a consideration. Magnetik was created with this in mind, allowing illuminated graphics to combine with an invisible magnetic system, to increase the visibility of products and information.
Using adjustable, internally-fixed magnets, and a range of accessories (including the ability to create custom fixings), displays can be immediately updated to suit new Lightbox graphics or promotional displays.
Developed to give you completely even illumination, no matter where the magnets are positioned - clever!
Kinetik Video Lightbox
Create intrigue! Embellish static graphics with a digital texture, create artowrk that commands attention and bring imagery to life with animation.
Kinetik allows a high resolution printed fascia to be combined with dynamic video content or variable coloured light via addressable LED modules positioned behind the textile fascia.
Whether used for subtle or dramatic effect, Kinetik offers our clients a more cost-effective way to promote specific messages than with traditional screens or LCD technology.
Creating an animated backdrop is easy with Kinetik, whether it’s fireworks or moving sky, you can change the video behind
the imagery as often as you wish with our integrated LED technology.
Soft, low resolution animation is produced using advanced software. First we take video content and break it down into frames, which are further broken down into grid-like sections. Each diode in the module represents a pixel in the same way a TV screen is made up of pixles. In Kintetik, the pixels are 10mm apart.
Each section is attributed to a pixel which are each programmed frame by frame in sequence so that a moving image is created when all the pixels are running concurrently.
All of the data can be saved and stored on a single memory card that plugs directly into the lightbox, making it extremely easy to update both textile prints and video content as the seasons change.
1890mm
510mm
320mm
160mm
15mm
15mm
IMPORTANT TO NOTE:
The overall size of the Kinetik lightbox must factor in the modular size of the LED panels. Each module measures 320mm x 160mm and can be positioned in a landscape or portrait orientation.
The extruded aluminium frame also adds 30mm to the overall height and width.
Flat-pack lightboxes.
Some of our lightboxes are available as a flat-pack solution to enable our customers to reduce the volume and therefore costs associated with
logistics whilst also minimising their carbon footprint.
Better still, we’ve developed our flat-pack lightboxes to be assembled easily with only one
tool required!
130mm
2000mm
350mm
105mm
1500mm
2100mm
In the example above, when packed fully assembled the lightbox measures 0.67 m3. However, when the lightbox is flat-packed, the parcel only
measures 0.096 m3.
Flat-packed items are also far more suitable to be handled by overnight courier services, whereas fully assembled items are more likely to need dedicated vehicles to ensure they
are delivered undamaged.
Using the example above, sending the lightbox flat-packed equates to approximately a 600% saving on shipping costs!*.
*Example caluculated based on the lightbox being shipped on a next day delivery service from Manchester to London.
CBM Fully assembled = 0.67 m3
(when packed)
CBM Flat-packed = 0.096 m3
Example_ Ledge 105
A compact solution for wider distribution
Accessories
We have a standard range of accessories to help with various applications.
Whether your lightbox is to be free-standing or wall mounted, we have standard accessories designed to offer flexibility.
If you have have a specific project you wish to discuss, get in touch with our experienced team who will be able to guide you on the best method.
Wall mounted accessories
Bracket, screw fixed to the wall, then lightbox frame hooks onto bracket.
Suitable for use with Ledge 105.
N.B. If wall mounting a Ledge 105, the side of the lightbox must be either fixed to a white wall or be fitted with a white fabric on the rear face in order to make sure the light is reflected inside the lightbox.
Bracket, screw fixed to the wall, then lightbox frame hooks onto bracket.
Suitable for use with:
Flux 18 or Ledge 34 / 22
Part no. UA10173 Wall mount bracket
Part no. UA17501Wall mount bracket
Our back lit lightboxes can be fixed to a wall using a standard wall screw through the back panel
Suitable for use with:
Ledge 135 / 65 / 46
N.B. we recommend that the screw is as close to the outer edge as possible and must not go through any cables or LEDs
Standard screwfixing
Part no. UA10189Foot Plate445 x 75 x 10mm
Suitable for use with:
Ledge 65 / 50 / 46 / 34
Suitable for use with:
Ledge 135 / 105 / 65 / 50 / 46 / 34 & Kinetik.
Foot plate accessories (for free-standing lightboxes)
Part no. UA4794Foot Plate225 x 75 x 10mm
Part no. UA12952Foot Plate750 x 75 x 10mm
Part no. UA17607Foot Plate400 x 75 x 10mm
Suitable for use with:
Ledge 105
Suitable for use with:
Ledge 50 / 46 / 34
Suitable for use with:
Ledge 135 & Kinetik
Part no. UA12201Foot Plate592 x 410 x 10mm
Please note: For suspended lightboxes, suspension kits are available depending on the application. Please call our helpful team for more information.
In-house Design, Manufacture, & Project Management
Our technical & creative design, production, and project management teams deliver solutions for
some of the UK’s largest retailers, designers, and architects.
We’re ideally placed to collaborate on complex interior projects, thanks to our Manchester-based manufacturing facility, and can manage projects
from brief through to installation.
Delivery & Installation
Depending your requirements, we can provide a delivery and installation service to facilitate domestic and international roll-out projects.
Please speak to one of our team to discuss your requirements.
Dep
th
(mm
)
Min
imum
Si
ze (m
m)
Max
imum
Si
ze (m
m)
Free
stan
ding
Wal
lM
ount
ed
Cei
ling
Hun
g
Col
umn
Wra
p
Sing
le-s
ided
Dou
ble-
Side
d
Ten
sion
Fab
ric
Dur
atra
ns
Eco
Eco
+
Eco
Pow
er
Eco
Edg
e
Edg
e P
CB
Opt
iFor
m B
L
Opt
iFor
m S
F
Inte
rnal
Ext
erna
l
Fla
tpac
k
Mag
neti
k
Ledge 135 135
Kinetik 135
Ledge 105 105
Ledge 65 65
Ledge 50 50
Ledge 46 46
Ledge 34 34
Ledge 22 22
Flux 18 18
Sizes Application Graphics
Lightbox Matrix
Our Lightbox Matrix (below) gives you an overview of the lightbox range to help you select the right product for your project.
Alternatively, get in touch with our knowledgable team who will be happy to help you.
Available as standard
Optional
LEGEND
Lighting Technology PSU
Ledge 135
Kinetik
Ledge 105
Ledge 65
Ledge 50
Ledge 46
Ledge 34
Ledge 22
Flux 18
- Not Available
Special Extras
5m x 50m+
Approx.3m x 5m
3m x 2.25m
5m x 50m+
5m x 50m+
0.51m x 6.7m
0.35m x 0.35m
0.35m x 0.35m
0.35m x 0.35m
0.35m x 0.35m
2.9m x 1.3m
2.9m x 1.3m
2.9m x 1.3m
2.9m x 1.3m
0.35m x 0.35m
0.35m x 0.35m
0.35m x 0.35m
0.35m x 0.35m
Ledge 135
135mm deep LED Lightbox, designed for high powered, even illumination.
Single Sided
Replaceable Fabric Graphics
5 Year Warranty
Ledge 135 creates engaging, impactful displays, that drive footfall, generate sales, and enhance brand awareness.
Created in sizes up to 3m x 50m, Ledge 135 is a backlit lightbox utilising replaceable tension fabric graphics, designed to be wall mounted or freestanding in larger sizes.
5
River IslandEuropean Store Rollout
2013 - Ongoing
Ledge 135Lighting Information
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
Ledge 135 Technical Information
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
Ledge 135 is manufactured in-house & delivered as a complete
display, for easy installation
Using silicon-edged fabric graphics, you can change the look
of interiors in minutes
Ledge 135 is designed to be freestanding, wall-mounted,
and ceiling-hung.
All our LED products are manufactured from materials
that are fully recyclable.
Max height = 5mMax width = 50m+
Depth = 135mm
Approximate weight =
20 kg/m2*
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain
Replaceable Fabric
Graphics
5
LED Back Panel
Fabric Channel
An algorithmically calculated LED pitch illuminates the rear of your fabric graphics
An 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
135mm
Fabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications.
ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Eco+ EcoPower OptiForm BL
12V DC 12V DC 24V DC
485cd/m2 725 cd/m2 275 cd/m2
6500K (+/- 300k)
6500K (+/- 300k)
6500K (+/- 300k)
32W/m2 69W/m2 32W/m2
>36000 hrs >36000 hrs >36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80 80 80
Ledge 105
105mm deep LED Lightbox, utilising side-firing illumination enabling flatpack delivery and ‘Magnetik’ display integration.
Double Sided
Replaceable Fabric Graphics
5 Year Warranty
Ledge 105 is a freestanding, double sided LED Lightbox, capable of flat-pack delivery thanks to interior-mounted drivers and LEDs featuring custom optics for precise, even illumination.
Created in sizes up to 3m x 2.25m, Ledge 105 utilises replaceable tension fabric graphics, ideal for fast-paced environments.
Magnetik is a concealed magnetic shelving system, which integrates seamlessly into Ledge 105. Magnetik mounts within the Lightbox itself and invisible from the outside, allowing display accessories to ‘float’ on your custom graphics.
5FlatPack
Magnetik Integration
Tom DixonRetail Store Refresh
ASDA GeorgeConcept Store & Rollout Collaboration
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
Ledge 105 is designed & manufactured in-house at our Manchester HQ
Each length of Ledge 105 is supplied part- assembled for easy on-site installation
Using silicon-edged fabric graphics, you
can change the look of interiors in minutes
Ledge 105 is designed to be a freestanding
display, with supporting feet for stability
All our LED products are manufactured from materials
that are fully recyclable.
Max height = 3mMax width = 2.25m
Depth = 105mm
Flatpack Delivery & Easy
Installation
Approximate weight =
13 kg/m2*
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain
Replaceable Fabric
Graphics
5
Side-fire LEDsOur side-fire LEDs with mounted optic efficiently deliver illumination evenly across the graphic surface
Ledge 105 Technical Information
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
Fabric ChannelAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
105mm
Fabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications.
ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
Ledge 105Lighting Information
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
OptiForm SF
3-50V DC
605 cd/m2
5700K (+/- 300k)
45W/m2
>36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80
Ledge 65
Single Sided
65mm deep LED Lightbox, designed for high-powered, even graphic illumination.
Replaceable Fabric Graphics
5 Year Warranty
Ledge 65 is single-sided LED Lightbox, designed to be wall-mounted, ceiling-hung, and freestandng (in larger sizes).
Utilising energy efficient & high powered linear PCB’s, Ledge 65 combines impactful illuminated graphics and reduced power consumption.
Created in sizes up to 3m x 50m, Ledge 65 is a backlit lightbox utilising replaceable tension fabric graphics.
Ledge 65 can also be specified with “Magnetik” integration, allowing for the creation of ‘floating’ product displays via magnets mounted into the Lightbox back-panel.
5Magnetik
Integration
ASDA GeorgeIntegrated & Wall-Mounted Lightbox Displays
Superdry, ViennaInternational Lightbox Rollout
Active In StyleMagnetik Lightbox
Concept Store Display
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
All our LED products are manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain5
Ledge 65 Technical Information
Ledge 65 is manufactured in-house & delivered as a complete
display, for easy installation
Using silicon-edged fabric graphics, you can change the look
of interiors in minutes
Ledge 65 is designed to be freestanding, wall-mounted,
and ceiling-hung.
Max height = 5mMax width = 50m+
Depth = 65mm
Approximate weight =
11 kg/m2*
Replaceable Fabric
Graphics
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
Fabric ChannelAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
65mm
Fabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications.
ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
LED Back PanelAn algorithmically calculated LED pitch illuminates the rear of your fabric graphics
Ledge 65Lighting Information
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Eco Eco+ OptiForm BL
12V DC 12V DC 24V DC
630 cd/m2 1235 cd/m2 1815 cd/m2
6500K (+/- 300k)
6500K (+/- 300k)
6500K(+/- 300k)
31W/m2 64W/m2 86W/m2
>36000 hrs >36000 hrs >36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80 80 80
Ledge 50
Double Sided
50mm deep LED Lightbox, with integrated light guide plate for slimline, integrated displays.
Replaceable Fabric Graphics
5 Year Warranty
Ledge 50 is double-sided LED Lightbox, designed to be integrated into display units or ceiling-hung.
Our thinnest double sided lightbox, Ledge 50 uses the latest LED light guide plate technology to provide bright, even illumination on both sides, from a single light source.
5
O2, SamsungIntegrated double sided Ledge 50 Lightbox
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
Ledge 50Lighting Information
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
All our LED products are manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain5
Ledge 50 is manufactured in-house & delivered as a complete
display, for easy installation
Using silicon-edged fabric graphics, you can change the look
of interiors in minutes
Ledge 50 is designed to be wall-mounted, integrated orand
ceiling-hung.
Max height = 1.3mMax width = 2.8m
Depth = 50mm
Approximate weight =
11 kg/m2*
Replaceable Fabric
Graphics
Light Guide Plate
An algorithmically calculated dot pattern etched onto optical grade acrylic, illuminates graphics
Ledge 50 Technical Information
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
Fabric ChannelAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
50mm
Fabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications. ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Eco Edge
12V DC
860 cd/m2
6000K (+/- 300k)
38W/m2
>36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80
Ledge 46
Single Sided
46mm deep LED Lightbox, designed to seamlessly wrap columns and corners.
Replaceable Fabric Graphics
5 Year Warranty
Ledge 46 is single-sided LED Lightbox, designed to be wall-mounted, surrounding columns or wrapping around corners.
Ledge 46 utilises our latest LED optic technology, which distorts the light beam to ensure even, high output, illumination.
5
SuperDry, ManchesterWall-mounted & Ceiling-suspended Ledge 46 Lightboxes
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
Ledge 46Lighting Information
An extruded aluminium profile designed for rigidity and to dissipate heat.
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
All our LED products are manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain5
Ledge 46 is manufactured in-house & delivered as a complete
display, for easy installation
Using silicon-edged fabric graphics, you can change the look
of interiors in minutes
Ledge 46 is designed to be wall-mounted, integrated orand
ceiling-hung.
Max height = 5mMax width = 50m
Depth = 46mm
Approximate weight = 6 kg/m2*
Replaceable Fabric
Graphics
Ledge 46 Technical Information
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
Fabric ChannelAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
46mmFabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications.
Profile
LED Back PanelAn algorithmically calculated LED pitch illuminates the rear of your fabric graphics
The Ledge 46 can be used to join two lightboxes at a corner and therefore wrap a column
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Eco Eco+ OptiForm BL
12V DC 12V DC 24V DC
1320 cd/m2 2545 cd/m2 2820 cd/m2
6500K(+/- 300k)
6500K(+/- 300k)
6500K(+/- 300k)
53W/m2 109W/m2 118W/m2
>36000 hrs >36000 hrs >36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80 80 80
Ledge 34
Single Sided
34mm deep LED Lightbox, utilising high quality light guide plate illumination.
Replaceable Fabric Graphics
5 Year Warranty
Ledge 34 is an incredibly thin single-sided LED Lightbox, with an integrated light guide plate which creates high output, even illumination.
Manufactured using our in-house laser machine, an algorithmically calculated dot pattern is etched onto optical grade acrylic, resulting in high quality lighting.
5
Matalan UK RolloutWall-mounted & integrated Ledge 34 LED lightboxes
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
Ledge 34Lighting Information
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
All our LED products are manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain5
Ledge 34 is manufactured in-house & delivered as a complete
display, for easy installation
Using silicon-edged fabric graphics, you can change the look
of interiors in minutes
Ledge 34 is designed to be wall-mounted, integrated and
ceiling-hung.
Max height = 1.3mMax width = 2.8m
Depth = 34mm
Approximate weight =
10 kg/m2*
Replaceable Fabric
Graphics
Ledge 34 Technical Information
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
Light Guide Plate
An algorithmically calculated dot pattern etched onto optical grade acrylic, illuminates graphics
Fabric ChannelAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
34mm
Fabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications. ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Edge PCB1 Edge
Edge PCB2 Edge
24V DC 24V DC
1365 cd/m2 2645 cd/m2
5700K (+/- 300k)
5700K (+/- 300k)
33W/m2 66W/m2
>36000 hrs >36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80 80
Please note: If edge lighting Ledge 34 from 1 edge, the maximum dimension on the shortest edge = 800mm
Ledge 22
Single Sided
22mm deep LED Lightbox, providing slimline, high quality illumination & replaceable graphics.
Replaceable Fabric Graphics
5 Year Warranty
Ledge 22 is our slimmest single-sided LED Lightbox with replaceable fabric graphics, featuring an integrated light guide plate which creates high output, even illumination.
Manufactured using our in-house laser machine, an algorithmically calculated dot pattern is etched onto optical grade acrylic, resulting in high quality lighting.
5
DestinologySlimline, Wall-Mounted and
Recessed Ledge 22 Lightboxes
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
Ledge 22Lighting Information
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
All our LED products are manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain5
Ledge 22 is manufactured in-house & delivered as a complete
display, for easy installation
Using silicon-edged fabric graphics, you can change the look
of interiors in minutes
Ledge 22 is designed to be wall-mounted and integrated
Max height = 1.3mMax width = 2.8m
Depth = 22mm
Approximate weight =
10 kg/m2*
Replaceable Fabric
Graphics
Ledge 22 Technical Information
* Weight excludes graphic & power
supply. Based on a 1m2 lightbox
Light Guide Plate
An algorithmically calculated dot pattern etched onto optical grade acrylic, illuminates graphics
Fabric ChannelAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
22mm
Fabric GraphicA printed textile graphic
with fabric specifically designed for illuminated
applications. ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Eco Edge
12V DC
860 cd/m2
6000K (+/- 300k)
38W/m2
>36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80
Flux 18
Single Sided
18mm deep, light guide plate illuminated LED Lightbox, with photographic-quality Duratrans graphics.
Duratrans Quality Graphics
5 Year Warranty
Flux 18 is our slimmest LED Lightbox, which utilises high quality, interchangeable Duratrans graphics that are held in a place by a magnetic PETG lens.
Illuminated by a light guide plate, Flux 18 is manufactured using our in-house laser machine, which etches an algorithmically-calculated dot pattern onto optical grade acrylic, resulting in high quality lighting.
5
O2, UK RolloutWall-mounted Flux 18 LED Lightboxes with replaceable Duratrans graphics
Tesco Extra, UK RolloutIntegrated Flux 18 Lightboxes &
Illuminated shelving
Lumenal is Unibox’s sister company, specialising in the manufacture of high quailty LED lighting solutions.
Based in the same UK Headquarters as Unibox, Lumenal boast a wide range of manufacturing capabilities, from custom PCB design to bespoke aluminium extrusion manufacture.
Flux 18Lighting Information
We offer unrivalled quality. All our lightboxes come with a 5 year
Warranty as standard.
All our LED products are manufactured from materials
that are fully recyclable.
All our lightboxes, including the internal electronics, are
made in our Manchester based manufacturing facility
Made in Britain5
Flux 18 is manufactured in-house & delivered as a complete display,
for easy installation
Using Duratran graphics with a magnetic PETG lens, you can change the look of displays in
minutes
Flux 18 is designed to be wall-mounted and integrated
into displays
Max height = 1.3mMax width = 2.8m
Depth = 18mm
Approximate weight =
10 kg/m2*
Replaceable DuratranGraphics
Duratrans GraphicsA magnetic PETG lens mounts a
high quality Duratrans Graphic onto the illuminated surface
Flux 18Technical Information
* Weight excludes graphic or power
supply. Based on a 1m2 lightbox
Light Guide Plate
An algorithmically calculated dot pattern etched onto optical grade acrylic, illuminates graphics
Magnetic stripAn 11mm channel allows for the insertion & easy replacement of
silicon edged graphics
18mm
ProfileAn extruded aluminium profile designed for rigidity and to dissipate heat.
Standard colour temperature
Custom on request
Power consumption
Dependent on size. Figures shown based on 1m x 1m.
Operating Voltage
Diodes
BrightnessDependent on size. Figures shown
based on 500mm x 500mm.
L70* *L70 indicates the number
of hours before light output drops to 70% of initial output.
Edge PCB1 Edge
Edge PCB2 Edge
24V DC 24V DC
1365 cd/m2 2645 cd/m2
5700K (+/- 300k)
5700K (+/- 300k)
33W/m2 66W/m2
>36000 hrs >36000 hrs
Ra-index****measurement of light source’s
ability to render colours correctly, graded from 0-100.
Ra 80 80
Please note: If edge lighting Flux 18 from 1 edge, the maximum dimension on the shortest edge = 800mm
All textiles are supplied with sewn-in silcon edging which allows quick & easy application into the light box frame and use special back-lit fabrics, specifically
formulated for illuminated applications. These ensure that when light is applied to the rear of the graphic, the light is diffused evenly so that hot spots are not visible and the vibrancy of the graphics are enhanced rather than washed out. However there are two
printing processes available.
UV Printing
UV printing involves an inkjet process whereby once the ink is apllied the fabric, it is cured under a ultra-violet light, ensuring that the ink is dried onto the top layer almost
immediately, resulting in a high definition print as the ink doesn’t have time to spread or bleed into the fabric.
Generally, UV printing is considered to give you a more vibrant effect and allows you to achieve a better contrast, meaning darker colours are richer.
Dye Sublimation
Dye sublimated printing is a two-step process. Firstly the graphic or image is printed onto the fabric and then bonded (or sublimated) into the fabric, generating a much
more durable printed textile, which is perfect for fabrics that are destined to be handled more.
We recommend Dye Sublimated printing for textiles that will be handled many times and for all our Magnetik light boxes, to ensure the image remains in place even when
shelves and hooks accessories constantly being moved about.
Please do ask our team for advice on what type of fabric will work for your project.
Textile Printing
Our textile-faced lightboxes are created using two different printing processes. The choice depends on the application.
In order to ensure quick turnaround, please follow our simple steps for supplying us with your artwork in the correct format
Artwork Specifications
If you are at all unsure, please speak to one of our team for advice.
Accepted File Formats
It is preferred to receive a file as a high res PDF.
We accept files in the following applications:Photoshop, & Illustrator.
(If you send via an open application, please ensure you supply us with the high res files, outline all fonts and
embed all images).
Artwork Settings
Please enure you apply a 25mm bleed to all sides of your image. It is also recommended that you leave an extra 20mm ‘safe area’ - a border free of important imagery or text, just in case the fabric needs to be
trimmed during the printing process.Please supply all graphics at full scale wherever
possible. When a graphic is large format, some scaling might be neccessary to reduce the file size. If you’re unsure, please do gives a call an we’ll be happy to
advise.
Image Resolution
Image resolution depends of the distance between the subject and where it is
viewed from. We recommend that you aim for 300dpi where possible. However for larger format graphics, please use the
following as a rough guide: Less than 4 feet away = 100dpi
4 to12 feet away = 72dpi12 feet and above = 36dpi
Colours
Images need to be supplied in CMYK (except for photographic images,
which should be supplied set up as RGB).
10mb
Submitting Files
Depending on the size of your file, you can send to us via e-mail or via
wetransfer for larger files (over 10mb).
25mm Bleed area
Graphic
20mm Safe area
50
0m
m
500mm