KUMARAGURU College of technology
character is life
Four days Workshop
on
Automotive NVH
(Noise, Vibration and Harshness)
In association with
Acoustical Society of India
on
28th – 31st January 2014
Faculty of Mechatronics Engineering
KUMARAGURU COLLEGE OF TECHNOLOGY
(An Autonomous institution affiliated to Anna University, Chennai)
Coimbatore – 641 049.
Organised by
REGISTRATION FEE
ELIGIBILTY:
Open to all Interested Research Scholars, Engineering
Graduates (Masters and Bachelors), Academicians
and industry personnel.
Note: Registration is limited to 40 members only.
Accommodation will be arranged on request but
charged separately.
Category ASI Members Non ASI Members
Students & Research
Scholars: Rs.1000/- Rs.1500/-
Academician: Rs.2000/- Rs.2500/-
Industry Personnel Rs.8000/- Rs.8500/-
T h e f i l l e d i n r e g i s t r a t i o n f o r m a l o n g w i t h a
D D i n f a v o r o f “ T H E P R I N C I P A L , K U M A R A G U R U
C O L L E G E O F T E C H N O L O G Y , C O I M B A T O R E ” thwill only be accepted, and should reach us on or before 5 January 2014.
IMPORTANT DATES:
Last date for receiving the Application
Notification of Selection
Workshop dates
th05 January 2014
th10 January 2014
th st28 to 31 Jan 2014
ADDRESS FOR CORRESPONDENCE
Mr. R. Saravanan
Organizing Secretary
Dept. of Mechatronics Engineering
Kumaraguru college of Technology
Coimbatore - 641 049.
OFFICIAL SPONSORS:
Since 1907
KUMARAGURU College of technology
character is life
Four days Workshop
on
Automotive NVH(Noise, Vibration and Harshness)
In association withAcoustical Society of India
on
28th – 31st January 2014
Name:
Designation:
Organization:
Address:
Mobile:
Email :
Fax:
Amount:
Category: Academician /Student / Researcher / / Professionals from Industry
Date:
*Accommodation Needed: Yes / No
Signature of the ApplicantSignature of
Head of the Organisation
(*will be charged extra)
REGISTRATION FORM
About the Institution:
K u m a r a g u r u C o l l e g e o f T e c h n o l o g y ( K C T ) ,
C o i m b a t o r e i s a n I S O c e r t i f i e d a n d N A C C a c c r e d i t e d
pr ivate Engineer ing Col lege started in 1984 under the
a u s p i c e s o f R a m a n a n d h a A d i g a l a r F o u n d a t i o n .
Under the ab le gu idance and patronage of Arutse lvar
D r. N . M a h a l i n ga m , C h a i r m a n , S a kt h i G ro u p a n d w i t h
the able administration of Dr.B.K.Krishnaraj Vanavarayar,
C o – C h a i r m a n , S h r i . M . B a l a s u b r a m a n i a m ,
C o r r e s p o n d e n t , a n d S h r i . S h a n k a r V a n a v a r a y a r ,
J o i n t - C o r r e s p o n d e n t , t h e c o l l e g e h a s e v o l v e d w i t h
excellent infrastructure and experienced faculties in the region
Currently the college offers 13 under-graduate (B.E., B.Tech.),
12 post-graduate degree programs (M.E., M.Tech., MCA, MBA)
as an Autonomous institution, affiliated to the Anna University, Chennai. All the eligible departments are accredited by NBA.
About the Department:
The Department of Mechatronics Engineering was established
in the year 1999 and offers B.E. in Mechatronics engineering.
The department has well developed laboratory infrastructure which
bridges the gap between industry and academia.Industrial automation,
Robotics,Automotive NVH, and design optimization are the thrust
areas of this department.
About the workshop:
The Indian Automobile industry has matured to compete
with the global players and it is necessary for us to produce
indigenous products with high comfort and reduced fuel
consumption whilst providing economical solution. The objective
of motor vehicles is achieved by the conversion of energy from
alternator, engine and power train. The energy conversion
process has its own shortcomings such as noise and vibrations.
Engineering problems such as poor machining, balancing, etc.
are the major sources for noise and vibration and it is essential
to optimize the design to produce quieter and efficient machines.
Hence, automakers are concentrating more on Noise, Vibration and
Harshness (NVH) to produce better machines without compromising
on comfort and quality. Thus, this workshop is framed to impart
theoretical knowledge of NVH with a right blend of hands on
practice for computational methods to predict the noise sources
and their paths in the vehicle design. In addition, hands on training
will be provided on computer based measurements and control
methods used in automotive NVH.
Highlights:
Eminent speakers from ARAI, ASI National Instruments and
JOST Engineering.
Hands on training from the experts to the participants.
Session Details:
Introduction to Automotive NVH, Vibration and Acoustics
Intake and Exhaust Manifold NVH
Power train and Drive line NVH
Noise Source identification
Legislation for Pass by noise and Sound quality
Transfer path Analysis
Control Methods (Interior and Exterior Noises)
Development of NVH test facility
FEA & BEA based vibro acoustic NVH
CFD based aero acoustic NVH
Organizing Committee:
Chief Patron: Dr. N. Mahalingam,
Chairman.
Patrons: Dr. B. K. Krishnaraj Vanavarayar,
Co-Chairman.
Shri. M. Balasubramaniam,
Correspondent.
Shri. Shankar Vanavarayar,
Joint – Correspondent.
President: Dr. R. S. Kumar,
Principal.
Convener: Dr.S.A.Pasupathy,
Head / Mechatronics.
Secretary : Mr. R. Saravanan,
Assistant Professor / Mechatronics.
Organisers: Mr. M. Ramesh Kumar,
Assistant Professor / Mechanical.
Ph: 95431 89848
Mr. A. Ramkumar,
Assistant Professor / Mechatronics.
Ph: 99441 40675
Mr. T. Suresh,
Assistant Professor / Mechatronics.
Ph: 99420 90470
Some of the Eminent Speakers:
Dr. M. L. Munjal
(Professor, IISC, Bangalore)
Mr. S. Raju
(Former Director, ARAI)�
Dr. J. S. Rao
(President Academics, KCT)
Dr. P. V. S. Ganeshkumar
(Dy. Director, NSTL, Visakapattnam)
Mr. Atul Miskin
(Altair, Pune)
Mr. Murali Bodla
(Mahindra & Mahindra, Chennai)
Dr. T. J. Sarvoththama Jothi
(Assistant Professor, NIT, Calicut)
Recommended
