Model: SE2C3 115V 1P
Gorman-Rupp electric submersible pumps are designed for dewatering where solids are not a concern – whether it is a flooded basement, a pool, spa, pond, or pit, or anywhere else where the pump can be lowered into the water. Built with a 49-foot power cord and a barbed discharge connection, these pumps are ready to go to work. Cast iron construction and mechanical seals mean they are built to last. Models are available with optional built-in level controls for automatic on/off operation.
GENERAL INFORMATION
Model Description Ship Wt. (Approx.)
Driver Type (HP)
Max. Solids
Dis. (NPT)
Basic Construction
Seal Type & Elastomer/Faces
VAC 60 Hz Phase Amps Motor
Housing (RPM)
SE1 1/2A3 115V 1P Submersible 42 lbs. Electric Motor (1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450)
SE1 1/2A3A 115V 1P Submersible Auto-start 42 lbs. Electric Motor
(1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450)
SE2C3 115V 1P Submersible 52 lbs. Electric Motor (1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470)
SE2C3A 115V 1P Submersible Auto-start 52 lbs. Electric Motor
(1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470)
SE2D3 115V 1P Submersible 78 lbs. Electric Motor (1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450)
SE2D3A 115V 1P Submersible Auto-start 78 lbs. Electric Motor
(1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450)
FEATuRESn Cast iron construction n Built-in carry handlen Motors are 115 VAC, single phase and include a 49 ft. (14,9 m) power cordn Thermal overload protectedn Built-in stainless steel strainer n Maximum liquid temperature
122º F (50º C)
n Optional level control (for manual models)n Buna-N mechanical seal with carbon and ceramic faces (SE2C3, SE1 1/2A3)n Buna-N mechanical seal with bronze and steel faces (SE2D3 only)n Available with auto-start/stop (see description)n 49 ft. (14,9 m) nylon lifting rope includedn Barbed hose connector
O35-0020
WARNING!Do not use in explosive atmosphere or for pumping volatile flammable liquids.
ELECTRIC SuBMERSIBLE PuMPS
REVISED: 11/2011
PuMP d IMENSIONAL dATA
Model A B C D E – Turn-Off Level
F – Turn-On Level Discharge* Cable Length
SE1 1/2A3 115V 1P9.19 16.81 4.21 6.30
N/A N/A 1.50 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00)
SE1 1/2A3A 115V 1P9.19 16.81 4.21 6.30 4.82 12.97
1.50 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00) (122,50) (329,50)
SE2C3 115V 1P9.19 16.81 4.21 6.30
N/A N/A 2.00 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00)
SE2C3A 115V 1P9.19 16.81 4.21 6.30 4.82 12.97
2.00 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00) (122,50) (329,50)
SE2D3 115V 1P10.12 20.93 4.29 7.09
N/A N/A 2.00 49 ft./(15,0 m)(257,00) (531,50) (109,00) (180,00)
SE2D3A 115V 1P10.12 20.93 4.29 7.09 4.82 12.97
2.00 49 ft./(15,0 m)(257,00) (531,50) (109,00) (180,00) (122,50) (329,50)
INCHES (MILLIMETERS)
©2011 The Gorman-Rupp Company. The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.
ELECTRIC SuBMERSIBLE PuMPS
SE
SE
RIE
S
Curves are based on a speci�c gravity of 1.0U.S. GALLONS PER MINUTE (LITERS PER SECOND)
TOTA
L HE
AD IN
FEE
T (M
ETER
S)*
*To convert to PSI divide by 2.31
0 10 (0,6)
20 (1,3)
30 (1,9)
40 (2,5)
50 (3,1)
60 (3,8)
70 (4,4)
80 (5,0)
90 (5,7)
100
(6,3)
110
(6,9)
100(30,5)
90(27,4)
80(24,4)
70(21,3)
60(18,3)
50(15,2)
40(12,2)
30(9,1)
20(6,1)
10(3,0)
0
SE1 1/2A3 115V 1PSE1 1/2A3A 115V 1PSE2C3 115V 1PSE2C3A 115V 1P
SE2D3 115V 1PSE2D3A 115V 1P
PERFORMANCE CuRVES
MOdEL: SE2C3A 115V 1P
A
B
C
D
E
F
DISCHARGE
*Standard NPT Pipe Threads
O35-0020