Model: SE2C3 115V 1P

Gorman-Rupp electric submersible pumps are designed for dewatering where solids are not a concern – whether it is a flooded basement, a pool, spa, pond, or pit, or anywhere else where the pump can be lowered into the water. Built with a 49-foot power cord and a barbed discharge connection, these pumps are ready to go to work. Cast iron construction and mechanical seals mean they are built to last. Models are available with optional built-in level controls for automatic on/off operation.

GENERAL INFORMATION

Model Description Ship Wt. (Approx.)

Driver Type (HP)

Max. Solids

Dis. (NPT)

Basic Construction

Seal Type & Elastomer/Faces

VAC 60 Hz Phase Amps Motor

Housing (RPM)

SE1 1/2A3 115V 1P Submersible 42 lbs. Electric Motor (1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450)

SE1 1/2A3A 115V 1P Submersible Auto-start 42 lbs. Electric Motor

(1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450)

SE2C3 115V 1P Submersible 52 lbs. Electric Motor (1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470)

SE2C3A 115V 1P Submersible Auto-start 52 lbs. Electric Motor

(1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470)

SE2D3 115V 1P Submersible 78 lbs. Electric Motor (1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450)

SE2D3A 115V 1P Submersible Auto-start 78 lbs. Electric Motor

(1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450)

FEATuRESn Cast iron construction n Built-in carry handlen Motors are 115 VAC, single phase and include a 49 ft. (14,9 m) power cordn Thermal overload protectedn Built-in stainless steel strainer n Maximum liquid temperature

122º F (50º C)

n Optional level control (for manual models)n Buna-N mechanical seal with carbon and ceramic faces (SE2C3, SE1 1/2A3)n Buna-N mechanical seal with bronze and steel faces (SE2D3 only)n Available with auto-start/stop (see description)n 49 ft. (14,9 m) nylon lifting rope includedn Barbed hose connector

O35-0020

WARNING!Do not use in explosive atmosphere or for pumping volatile flammable liquids.

ELECTRIC SuBMERSIBLE PuMPS

REVISED: 11/2011

PuMP d IMENSIONAL dATA

Model A B C D E – Turn-Off Level

F – Turn-On Level Discharge* Cable Length

SE1 1/2A3 115V 1P9.19 16.81 4.21 6.30

N/A N/A 1.50 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00)

SE1 1/2A3A 115V 1P9.19 16.81 4.21 6.30 4.82 12.97

1.50 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00) (122,50) (329,50)

SE2C3 115V 1P9.19 16.81 4.21 6.30

N/A N/A 2.00 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00)

SE2C3A 115V 1P9.19 16.81 4.21 6.30 4.82 12.97

2.00 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00) (122,50) (329,50)

SE2D3 115V 1P10.12 20.93 4.29 7.09

N/A N/A 2.00 49 ft./(15,0 m)(257,00) (531,50) (109,00) (180,00)

SE2D3A 115V 1P10.12 20.93 4.29 7.09 4.82 12.97

2.00 49 ft./(15,0 m)(257,00) (531,50) (109,00) (180,00) (122,50) (329,50)

INCHES (MILLIMETERS)

©2011 The Gorman-Rupp Company. The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.

ELECTRIC SuBMERSIBLE PuMPS

SE

SE

RIE

S

Curves are based on a speci�c gravity of 1.0U.S. GALLONS PER MINUTE (LITERS PER SECOND)

TOTA

L HE

AD IN

FEE

T (M

ETER

S)*

*To convert to PSI divide by 2.31

0 10 (0,6)

20 (1,3)

30 (1,9)

40 (2,5)

50 (3,1)

60 (3,8)

70 (4,4)

80 (5,0)

90 (5,7)

100

(6,3)

110

(6,9)

100(30,5)

90(27,4)

80(24,4)

70(21,3)

60(18,3)

50(15,2)

40(12,2)

30(9,1)

20(6,1)

10(3,0)

0

SE1 1/2A3 115V 1PSE1 1/2A3A 115V 1PSE2C3 115V 1PSE2C3A 115V 1P

SE2D3 115V 1PSE2D3A 115V 1P

PERFORMANCE CuRVES

MOdEL: SE2C3A 115V 1P

A

B

C

D

E

F

DISCHARGE

*Standard NPT Pipe Threads

O35-0020