www.messer.com.pl

MESSER is a polish manufacturing company. It has been founded in Warsaw (Poland), 1995.

Since 1999 the only company activity are the projects and the manufacturing of the units for remote objects monitoring- by the radio connection mainly.

Company offers their own complete monitoring system basing at the modern radio data transmit protocol (MESSER-3000).

Moreover, in our offer we also have devices compatible with radio systems of other known and popular manufacturers. These are the transmitters as well as repeaters and the base radio monitoring stations.

Since 2005 company began manufacturing of monitoring devices using phone and Internet lines.

CERTIFICATESCERTIFICATES

All of our devices are produced basing on the technical requirements of the European Union (СЕ).

Please notice that our equipment is compliant with the RTTE-ETSI requirements

(technical radio parameters specification).

According to its high demands, we have no problem with certification of our products in countries, which do not use European standards. Trying to accomodate to our customers

requirements, we offer the software and manuals in three languages: Polish, English and Russian.

Our systems are installed and successfully working in many EU and CIS countries, as i.a. Lithuania, Ukraine, Georgia, Azerbaijan, Moldova and Russian Federation and many others.

On our clients’ demand, we are able to make any language version.

RADIO SYSTEMSRADIO SYSTEMS

We offer devices compatible with the following systems:

- MESSER-PlusMESSER-Plus andand MESSERMESSER 3000 3000 – our own systems – our own systems

- VISONICVISONIC** MI MILLCOLCOL** D D and and V32 – V32 – systems ofsystems of VISONIC LVISONIC LТТDD company company

- LARSLARS** andand LARS 1 – LARS 1 – systems of systems of KPKP--SSystems companyystems company

- INFORMERINFORMER 12000* 12000* – – system ofsystem of CC&&K* companyK* company

- And others, accordingly to request...And others, accordingly to request...

- * * used descriptions are registered names or trademarks used to specify the used descriptions are registered names or trademarks used to specify the products onlyproducts only

We can provide each Security Agency with the set of devices being the full complete needed for its operating:

- RMV-2003/x - Basic Monitoring Stations

- RPT-2003/x – Long range repeaters

- UNR-01/x – Radio transmitters

- Messer Monitor software

RADIO DEVICESRADIO DEVICES

Monitoring stations RMV-2003/xRMV-2003/x

General features:

- 3 housing designs: RAK-19”, MINI-19cm or PC-BOX - Compatibility with radio protocols: Messer UFR-M and M3000,

Lars, Lars1, MilcolD 3+1 and 4+2 (Visonic 32b)

- Measurement of the radio signal digital quality (BER)

- Two-way communication with repeaters

- Optional communication with remote repeaters over GPRS link!

- Received messages buffer (up to 16 384 records)

- 2 RS-232 ports:- For communication with various software (many popular wire protocols) - For communication with printer (e.g. EPSON LX 300+)

Technical specifications:

- 4 alarm outputs activated by received messages

- 2 alarm inputs activated by various external devices

- Buffered power supply with 12V/7Ah rechargeable battery

- Signals’ compatibility with Motorola GM-340 transceiver

General features:- Compatibility with radio protocols: Messer UFR-M and M3000, Lars,

Lars1, MilcolD 3+1 and 4+2 (Visonic 32b)

- Measurement of the radio signal digital quality (BER)

- Retransmitted signals’ confirmation

- Received messages buffer (up to 8191 records)

- Transmitting of supervisory messages

- Optional communication with monitoring station over GPRS link!

- Repeater power supply status reporting

- Simple configuration through RS-232 port (Windows Hyperterminal)

Technical specifications:

- Single tamper input

- Metal housing for wall mounting

- Signal level compatibility with Motorola GM-340 transceivers

RepeatersRepeaters RPT-2003/xRPT-2003/x

We are offering three different variants of these devices:

Transmitters with Alarm Panel and LCD keypad - UNR 01 VHF/ RA 816

Transmitters with DTMF decoders - UNR- 01 UHF/ DTMF

Standard transmitters (8 inputs) - UNR-01 UHF

TRANSMITTERSTRANSMITTERS

Standard transmitters UNR 01 - VHFUNR 01 - VHF

General features:

- Simple parameters’ programming through RS-232 port (frequency, report codes, etc.)

- Two objects’ numbers service* - Operating with two monitoring stations * - Operating at two programmable frequencies* - Simple alarm panel (arming with f.ex. remote controller) option*

Technical specifications:

- 8 NO/NC programmable inputs- On/off input for built-in alarm panel* - Alarm output for siren control* - External battery charging circuit (no need any additional power supply) - Two internal inputs for battery and transformer’s voltage monitoring - Output for powering PIR sensors* - High frequency stability in wide temperature range - Programmable frequency synthesizer

- VHF (137174MHz) or UHF (420 470МHz) frequency range;

* features specific for MESSER’s production transceivers only!

*

Transceivers with DTMF communicator

UNR 01 - VHFUNR 01 - VHFGeneral features:

- Simple programming through RS-232 port of all parameters (frequency, report codes, etc.)

- Two objects’ numbers service* - Operating with two monitoring stations * - Operating at two programmable frequencies* - Serial data receiving from any alarm panel equipped with the phone

communicator and Ademco** DTMF 4+2 (Ademco Express) protocol; - hardware Watch-dog circuit;

Technical specifications:

- 8 NO/NC programmable inputs- DTMF interface module

- External battery charging circuit (no need any additional power supply)- Two internal inputs for battery and transformer’s voltage monitoring,

- High frequency stability in wide temperature range - Programmable frequency synthesizer

- VHF (137174MHz) or UHF (420 470МHz) frequency range;

* features specific for MESSER’s production transceivers only! * Ademco is registered name of Ademco Co.Ademco is registered name of Ademco Co.

LINES’ FEATURES:

8 inputs for PIR sensors on the main board

Additional 8 inputs on extension module

2 independent partitions (zones) Line programming options:

- N.O. or N.C. line- 24 hour line- Silent or loud line (siren activation)- Bypassed line- Excluded line- Separate or common line for partition- Night line (Stay) - Delayed input/output line (0-99sec).- Line alarm counter

OUTPUT FEATURES:

1 siren control output (PGM 150 mA)

4 outputs on extension module

1 output for PIR sensors powering (300 mA)

EVENTS MEMORY:

99 latest events

Transceivers with alarm panel and LCD keypads

Radio ALERT 816Radio ALERT 816

SYSTEM COUNTERS

Programmable exit time (0-99 sec)

Programmable entry time (0-99 sec)

Programmable siren time (5-99 sec)

USER OPTIONS:

- 6 User codes (4-8 digits)

- 1 Master code

- 1 Installer code for alarm panel keypad programming

- 1 Administrator code for PC programming

Users have a ability to:

- Arm/Disarm system or partition

- Arm system into Night mode

- Bypass alarm lines

- Activate keypad alarms: Police / Fire / Medical

- Change user codes (master code)

- Make periodical siren test

- Activate door lock (simple access control)

KEYPAD OPTIONS:

- Maximum no. of keypads: 4 with connection msupervisor

- Keypads are addressable separately for each partition

- Alarm panel programming and User control

PROGRAMMING METHODS:

- User options: keypad only

- Monitoring center settings: PC software only

- Alarm panel settings: PC software and keypad

- All programmings protected with passwords

Transceivers with alarm panel and LCD keypads

Radio ALERT 816Radio ALERT 816

MONITORING SYSTEMMONITORING SYSTEM

MESSER 3000MESSER 3000

MESSER-3000 ENCRYPTION PROTOCOL :

In comparison to other formats, UFR-M3000 distinguishes itself i.e. with very short transmission time.

This feature enables handling a large number of objects numbers (transceivers) operating at one frequency channel.

Advanced method of radio encryption and CRC coded protocol with an autocorrect function allow for a very high

receiving efficiency.

Radio protocol parameters Messer-3000Messer-3000

RADIO TRANSMISSION PARAMETERS

OBJECT NUMBER: 8191

NETWORK CODE NUMBER (STATION ID): 16

REPORT CODE NUMBER: 256 (00-FF)

TRANSMITT TIME: ~650 ms

Radio system Radio system assembling schematicsassembling schematics

Messer-3000Messer-3000

Network construction exampleNetwork construction example

Messer-3000Messer-3000

Multifrequency networkMultifrequency network

Messer-3000Messer-3000

Working on single frequencyWorking on single frequency Working with two frequenciesWorking with two frequencies

Multifrequency networkMultifrequency network

Messer-3000Messer-3000

Working with 3 frequenciesWorking with 3 frequencies

Example of addressing Example of addressing network devicesnetwork devices

Messer-3000Messer-3000

Retransmitters Retransmitters connected toconnected to Station Receiver Station Receiver

over GSM network with over GSM network with GPRSGPRS

Repeater sending messages to the Station through Internet or GPRS

Station receives using Internet (option1) Station receives using Internet (option2) Signals receiving using GSM/GPRS (option3)

Coded signals to Remote Station

GPRS phone transmitterwith RS232 input(any APN)

OR

Hardware ConverterRS232 --> Ethernet

Internet

RS232

Radio & GPRS Repeater

- Alar m S oft wa re

Operating Computer

RS232-1

Decoded signals

to PC Software

with Rs232 output(private APN)

GPRS phone receiver

RS232-master RS232-slave

Radio & GPRSMonitoring Station

Coded signals from Repeaters

Radio & GPRSMonitoring Station

Decoded signals

to PC Software

Coded signals from

Remote Repeaters

- Ala r m S oft ware- Eth e rne t > Rs2 32 c on vert er

Operating Computer

Coded signals from Repeaters

RS232-1 RS232-2 Eternet card

RS232-master RS232-slave

Operating Computer

Radio & GPRSMonitoring Station

- Ala rm S oft ware

Coded signals from Repeaters

Decoded signals

to PC Software

Hardware ConverterEthernet --> Rs232

(Constant IP) (Constant IP)Internet Internet

RS232-1

RS232-master RS232-slave

OTHER DEVICESOTHER DEVICES

of MESSER of MESSER COMPANYCOMPANY

Telephone monitoring station

RMT-2003/xRMT-2003/x

General features:

- 2 housing designs: MINI-19cm or PC-BOX

- Protocol compatibility: Ademco DTMF 4+2 and Contact ID

- Telephone lines’ efficiency control

- Inoperational or „blind” transmissions monitoring

- Supply voltage control

- Received messages buffer (up to 16 384 messages)

- RS-232 port for PC software communication (many different protocols)

Technical specifications:

- Simultaneous handling fo up to 4 telephone lines (separate processors)

- Compatibility with telephone lines in different international standards

- Robust protection against overvoltage on telephone line

Manufacturing plans for year 2010 cover developement of

the GSM/GPRS devices:

- Object communicators (transceivers) – GPRS – with alarm panel and LCD keypad.- Mobile GPRS transmitters with GPS system positioning.

GPRS technologyGPRS technology for alarm systems

monitoring

But if you do not have the software to operate with our station, we can provide You with Messer Monitor software, created especially on our demand. The software is available in 3 languages: English, Russian, Polish. Other language options also available on special demand.

SoftwareSoftware

All of our stations are equipped with various protocols for communication with any software available in the market that can be used for monitoring station control, according to the operator’s fancy, e.g. SIMS, SIS, Alarm Center, SMS, etc.

www.messer.com.pl