www .monar chmetal.com (631) 7 5 0 -3 0 0 0

Wall Panel Mounting Systems

Architectural Metals

(631) 750-3000www.monarchmetal.com

Monarch Metal 1625 Sycamore Ave Bohemia, New York 11716 (631) 750 3000 [email protected]

WALL PANEL SYSTEMS Four DifferentLooks for Reveals

Stainless Wall Panel Systems

Sharp Corner Stainless Steel Profiles

NEW PRODUCT

(Page 25)

(Page 54)

(Page 19)

NEW PRODUCT

Monarch Metal Fabrication • 1625 Sycamore Ave, Bohemia, New York 11716 • United States of America

(631) 750-3000 • (631) 563-8976 • [email protected] • www.monarchmetal.com

www.monarchmetal.com/products/easy-wall-panel-systemwww.monarchmetal.com/products/easy-wall-panel-system

www.monarchmetal.com/products/stainless-steel-wall-panel-system-250



www.monarchmetal.com/products/easy-wall-panel-system

http://www.monarchmetal.com/products/stainless-sharp-corner-angle/





05 Monarch Z Clip

Panel Hanging Systems

19 Wall Panel Systems

31 Standoffs

33 • Aluminum Standoffs

34 • Stainless Standoffs

45 Architectural Metals

46 • Angle: Aluminum,

Stainless Steel, Steel

CONTENTS

53 • Anodized Aluminum :

Angle, Structural Shapes

55 • Channel : Aluminum,

Stainless Steel, Steel

61 • Flat Bar: Aluminum,

Stainless Steel and Brass

66 • Diamond-Tread Plates

68 • Other Structurals: T Bar, Zees

73 Corner Guards & Kick Plates

74 • Corner Guards

75 • Kick Plates

20 • Monarch Easy Panel System

25 • Stainless System

28 • Glass Panel System

www.monarchmetal.com/products/corner-guards/


http://www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-pro�les/

www.monarchmetal.com/products/standoffs/

www.monarchmetal.com/products/easy-wall-panel-system/

www.monarchmetal.com/products/easy-wall-panel-system/

www.monarchmetal.com/products/hanging-systems/



www.monarchmetal.com/products/hanging-systems/


39 Rainscreen Cladding

42 • Exposed Fastener System

43 • Concealed Fastener System

http://www.monarchmetal.com/products/trespa-ts-110-exposed-fastener-system/

http://www.monarchmetal.com/products/trespa-ts-210-concealed-fastener-system/

Overview .................................................... 06

Choosing the Correct

Monarch Hanging System ................... 08

Standard Monarch Clips ....................... 09

Stainless Steel Monarch Clips ............. 15

MONARCH Z CLIP HANGING SYSTEMS

www.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systemswww.monarchmetal.com/products/hanging-systems

MONARCH Z CLIPSOverview

Monarch Metal has provided

the fastest and easiest method

to mount wall panels, signs,

art work and more for

close to 25 years.

The key advantages ofthe Monarch Z Clip system are:

• Simplicity of installation

• Strength and security of the mounting

• No visible screws or nails on the surface of the mounted panel

www.monarchmetal.com- 06 - (631)750-3000

www.monarchmetal.com/products/hanging-systems

MONARCH Z CLIPSOverview

For a typical 8’ high x 4’ wide panel, customers mount the continuous lengths along the wall at 3 different heights paral-lel with the floor. These are secured to studs at 16” on center or to blocking at 8” on center. The shorter panel clips are secured to the back of the panel every 12-15” horizontally.

To match fastener locations on the panel with those on the wall a single template can be used or one can use a story pole.

Installation of the panel is accomplished by simply dropping the panel onto the continuous lengths mounted along the wall.

For a video of an installation, please visit our web-site at MonarchMetal.com

Monarch recommends a #8 Pan Head thread screw for attaching the shorter panel clips to the back side of MDF or particle board panels, and stocks these in 1/2”, 5/8” and 3/4” lengths.

The important constraint to remember for using the Monarch Z Clip system is that the height of the head of the screw must be less than .125” for our standard Monarch Z Clips.

2 E

QU

AL

DIM

DIM 4”

plus

DIM

any

1 7/8”

.125”

4”

dim


www.monarchmetal.com/products/hanging-systems


Do you need a high strength

system?

CONVENTIONAL

STANDARDSTRENGTH

HIGH STRENGTH

GLASS /SPECIALITY

HIGHSTRENGTH

HIGH STRENGTH /CORROSION RESISTANT

MFTAPE3/8” Lift Off.293” Projection

2

3

1MF6255/8” Lift Off3/16” Projection

MF2501/4” Lift Off1/4” Projection

MF3753/8” Lift Off1/4” Projection

Are you hanging (i) a conventional

panel, OR (ii) a glass,HPL Phenolic, acrylic or aluminum ACM panel?

Do you need acorrosion

resistant system?MFSTR-0507/16” Lift Off1/2” Projection

MFSTR-11255/8” Lift Off1 1/8” Projection

MFSS-CHAN3/4” Lift Off1” Projection

MFSS-HD3/4” Lift Off1/4” Projection

MONARCH Z CLIPSChoosing the Correct Monarch Hanging Systemwww.monarchmetal.com/z-clip-selector-tools/www.monarchmetal.com/z-clip-selector-tools/

MONARCH Z CLIPSStandard Z Clips

www.monarchmetal.com- 09 -

MF375 Clip

Features:

• Monarch Z Clip system for hanging interior panels where the installer desires a 3/8” length of engagement

• 1/2” clearance required between the top of the panel and the ceiling

• 6063-T6 AluminumMF375 Clip1

1

Material

Stock Clip Size

Stock Continuous Length

Custom Lengths Available

Lift Off (1)

Projection (2)

Availability

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel.(2) The “Projection” is the distance that the panel sits out from the wall.

Aluminum

2 Inch

72 Inch, 144 Inch

Any

3/8 Inch

1/4 Inch

Same Day Shipping

MF375 1/4 Projection

2” Length3/8 Lift off

MONARCH

(631)750-3000

Standard Applications3/8” Lift O�1/4” Projection

www.monarchmetal.com/products/mf375-z-clips/

MONARCH Z CLIPSSpeciality Z Clips


MF375 Even Clip

Features:

• In line holes for 50% increase in panel processing speed

• 32mm hole spacing for line boring equipment

• 6063-T6 Aluminum

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability


Aluminum

2 Inch

72 Inch, 144 Inch

Any

3/8 Inch

1/4 Inch

Same Day Shipping

MF375

(631)750-3000

Alternative Clip for MF3753/8” Lift O�1/4” Projection

2” Length

MONARCH

1/4 Projection

3/8 Lift off

Specialty Clipwith In-Line

Holes




MF625 Clip

Features:





(631)750-3000

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

1 1/2 Inch

72 Inch, 144 Inch

Any

5/8 Inch

3/16 Inch

Same Day Shipping

MF625.200” Projection

5/8 Lift off

MONARCH

1 1/2” Length

MF625 Clip1

1

Standard Applications5/8” Lift O�3/16” Projection

www.monarchmetal.com/products/mf625-clip/



MF250 Clip

Features:





(631)750-3000

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

1/4 Inch

1/4 Inch

Same Day Shipping

MF250

MF250 Clip1

Applications WithLimited ClearanceAbove Panel1/4” Lift O�1/4” Projection

1/4 Projection

2” Length1/4 Lift off

MONARCH

1


1

2



MFSTR-050 Clip

Features:

• High strength aluminum system compatible with up to a 3/8’’ hex bolt



• Easily used for mounting on concrete block or other difficult materials

MFSTR-0502” Clip

1 MFSTR-050ContinuousLength

2


(631)750-3000

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

7/16 Inch

1/2 Inch

Same Day Shipping

MFSTR050

.500

1.500

.437

.125

2.000

(Available in lengths up to 144”)

Ø.250 THRUx2

High Strength Applications7/16” Lift O�1/2” Projection

www.monarchmetal.com/products/structural-heavy-duty-aluminum-panel-hanging-system/www.monarchmetal.com/products/structural-heavy-duty-aluminum-panel-hanging-system/www.monarchmetal.com/products/structural-heavy-duty-aluminum-panel-hanging-system/

1

2



MFSTR-1125 Clip

Features:

• Heavy duty adjustable height system for mounting curtain wall in exterior

applications

• Easy adjust bolt on clips for minor height adjustments

• Easy fit engagement for locating

• 3/4” clearance required above the panel


• Compatible with heavy duty hex bolts up to 3/8” for additional strength

• Perfect for mounting on concrete block or other difficult materials 1/4” x 20 Hex Bolt

for Minor HeightAdjustments

1 MFSTR-1125System

2


(631)750-3000

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

1.5 Inch

144 Inch

Any

5/8 Inch

1 1/8 Inch

Same Day Shipping

MFSTR-1125

2.000

2.625

1.125

Ø.250 THRU

1.49

.750

1.500

(Available in lengths up to 144”)

Cladding Applications5/8” Lift O�1 1/8” Projection

www.monarchmetal.com/products/mfstr-1125/

MONARCH Z CLIPSStainless Steel Hidden Fastening Systems


Heavy Duty Stainless Steel ClipsFeatures:

• High strength, corrosion resistant stainless steel material makes these

perfect for use in exterior wet or harsh environments


• Available in 304 Stainless Steel and 316 Marine Grade Stainless Steel

• Same simple engagement mechanism as our original Monarch Clips

Heavy DutyMFSS Clip

1


(631)750-3000

High StrengthCorrosion ResistantApplications3/4” Lift O�1/4” Projection

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Stainless Steel

1 1/2 Inch

48 Inch

Any

3/4 Inch

1/4 Inch

Same Day Shipping

MFSS HD Clips 1/4” Projection

3/4” Lift off

MONARCH

1 1/2” Length

1

www.monarchmetal.com/products/structural-heavy-duty-stainless-panel-hanging-system/






MONARCH Z CLIPSStainless Steel Hidden Fastening Systems


Stainless Steel Systemwith 1” Projection Features:

• High strength, corrosion resistant stainless steel material compatible with

up to a 3/8” hex bolt


• 304 Stainless steel

• 1” projection for building envelope applications


(631)750-3000

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Stainless Steel

3 1/2 Inch

48 Inch

Any

3/4 Inch

1 Inch

Same Day Shipping

MFSSCHAN

MFSSCHANMFSSCHANBracket

1 2

2

1

1.00

.063

1.00

.75

High StrengthCorrosion ResistantApplications3/4” Lift O�1” Projection

www.monarchmetal.com/products/stainless-building-envelope-panel-hanging-system/



MONARCH Z CLIPSHidden Fastening System with 3M High Strength Tape


MFTAPEFeatures:

• Easily used for mounting phenolic, ACM, aluminum and glass panels

• Each 1 ft of clip is rated for 7.5 pounds of shear strength using a 5x factor

• Suitable for interior and exterior applications (examples in 3M design

guide)

• 1/2” clearance required between The top of the panel and the ceiling

• 6063-T6 aluminum

• (2) strips of 3M VHB architectural panel tape pre-applied for peel and stick application

• Pairs with MF375 clip for material savings

• Redesign of clip to optimize adhesion with tapes

• Clip can also be purchased without The 3M tape for use with your preferred

vendor of glazing tape


(631)750-3000

For Glass, HPL & ACM Panels3/8” Lift O�1/4” Projection

MF375 Clip

MFTAPEBracket

1

2

0.063”Thick Tape

5 mmPanel

Material

Stock Clip Size



Lift Off (1)

Projection (2)

Availability

Aluminum

2 Inch

72 Inch, 144 Inch

Any

3/8 Inch

.293 Inch

Same Day Shipping

MFTAPE

1

2

MONARCH

3.375

1.260

.375

.250

1.260

Available in StockLength of 144”or Cut to Size

www.monarchmetal.com/products/phenolic-glass-glazing-panel-hanging-system/

Edge Trim

Panel Clips

HorizontalReveal

Wall Panel

Blocking

Wallboard

Stud

www.monarchmetal.com/products/easy-panel-systemwww.monarchmetal.com/products/easy-panel-systemwww.monarchmetal.com/products/easy-panel-systemwww.monarchmetal.com/products/easy-panel-system

MONARCH EASYWALL PANEL SYSTEM

System Features ....................................... 20

Reveal Options .......................................... 22

Corner & Perimeter Trim Options ...... 24

Stainless Wall Panel System ................ 25

Glass Wall Panel System ....................... 28

PATENT PENDING

MONARCH EASY WALL PANEL SYSTEMEasy Wall Panel System Features


Wall Fastener

PanelFastener

Panel

HorizontalReveal

MF375 Clip

BottomEdge Trim

Wall

Top EdgeTrim

Shim

CeilingCeiling

BaseBase

Metal StudMetal Stud

1

1

2

2

3

• Aluminum decorative trim for wall panel installations

• Purchase the aluminum trim separately from the panels

• 4 different choices for vertical and horizontal reveals

• Standard clear anodized aluminum finish

• Fast and easy shipment to meet project deadlines

Option for Horizontal Reveals & Edge Trim to be punched with

slotted holes for adjusting into place

after mounting.

3

Fast & simple installation centered around the intuitive

Monarch Z Clip System

NARROW

RECESSED

NARROW CHANNEL

WIDE CHANNEL

Four different looks for reveals in stock

1"

3/16"

1/16"

3/8"

PATENT PENDING


MONARCH EASY WALL PANEL SYSTEMEasy Wall Panel System Features

- 21 -

Narrow Recessed

Narrow Recessed

Step 1: Choose a Horizontal Reveal

Step 2: Choose a Vertical Reveal

Step 3: Choose an Edge Trim and Any Needed Corners

(EPS-H075-N) (EPS-H075-R)NarrowChannel

WideChannel

(EPS-H075-NC) (EPS-H075-WC)

NarrowChannel

WideChannel(EPS-V075-N) (EPS-V075-R)

(EPS-V075-NC) (EPS-V075-WC)

www.monarchmetal.com (631)750-3000

Outside Corner

Top Edge Trim

VerticalEdgeTrim

VerticalReveal

Bottom Edge Trim

HorizontalReveal

VerticalReveals

EdgeTrim

EdgeTrim

OutsideCorner

Plan/Elevation View


MONARCH EASY WALL PANEL SYSTEMReveal Options

- 22 -

Horizontal Reveal Options

Narrow(EPS-H075-N)

Recessed(EPS-H075-R)

Narrow Channel(EPS-H075-NC)

Wide Channel(EPS-H075-WC)

MF375Clip

1/16”Wall

3/4”Panel

MF375Clip

3/8”Wall

3/4”Panel

MF375Clip

1”Wall

3/4”Panel

3/16”



MONARCH EASY WALL PANEL SYSTEMReveal Options

- 23 -

Vertical Reveal Options

3/4”Panel

1/16”

Wall

3/4”Panel

3/8”

Wall

3/4”Panel

1”

Wall

Narrow(EPS-V075-N)

Recessed(EPS-V075-R)

Narrow Channel(EPS-V075-NC)

Wide Channel(EPS-V075-WC)

Wall

3/16”

3/4”Panel



MONARCH EASY WALL PANEL SYSTEMCorner & Perimeter Trim Options

- 24 -

Edge Trim, Inside Corners & Outside Corners

Edge Trim & Inside Corner(EPS-ET075-N)

Outside Corner(EPS-OC075-N)

Plan/Elevation View



Outside Corner

Top EdgeTrim

VerticalEdgeTrim

VerticalReveal

Bottom Edge Trim

HorizontalReveal

VerticalReveals

EdgeTrim

EdgeTrim

OutsideCorner


WALL PANEL SYSTEMSStainless Steel Wall Panel System

- 25 -www.monarchmetal.com

(631)750-3000

1/4” Exposed Stainless System

Features:

The trim is notched tocreate a near seamless

intersection

The brushed stainlessperimeter is installed

level and plumb beforeadding panels

The panels install onstandard Monarch Z

Clips

.25”

.375”

• Exposed 1/4” reveals

• Brushed, mirror & dull finishes available

• Fabricated from 18 ga. stainless steel

• Installation with standard Monarch Z Clips permits easy panel removal for repair

• Requires a 3/8” gap between the panel and the reveal (less with slotted holes)



WALL PANEL SYSTEMS


(631)750-3000


Features:• Exposed 1/2” reveals


• Fabricated from 18 Ga. stainless steel






Clips

0.5”

.375”


intersection


Stainless Steel Wall Panel Systemwww.monarchmetal.com/products/stainless-steel-wall-panel-system-500

WALL PANEL SYSTEMSStainless Steel Wall Panel System


(631)750-3000


Features:


intersection




Clips

.0625”

.375”

• Exposed 1/16” reveals


• Fabricated from 16 Ga. stainless steel






(631)750-3000

Glass Wall Panel System

• Installs with the Easy Panel System except the Glass Panels are attached using the MFTAPE product that uses 3M VHB Tape

• All of the same reveal options as the Easy Panel System, including narrow, recessed, narrow channel and wide channel

The glass wall panels areattached using the

Monarch MFTAPE System

MFTAPEBracket

0.063”Thick Tape

GlassPanel

WALL PANEL SYSTEMSGlass Wall Panel System

Features:

The panels theninterconnect with the

Easy Panel System likeany other wall panel


(631)750-3000

WALL PANEL SYSTEMSGlass Wall Panel System

Bottom

Edge

Trim

Wall

Metal StudMetal Stud

Base

MFTAPE

The trim corners mitertogether seamlessly tocreate a clean frame

Panels attach using 3MVHB Tape, eliminating

the need for drilling

STANDOFFS

Aluminum Standoffs .............................. 33

Stainless Standoffs ................................ 34


Standoff Barrels ...................................... 36

Standoff Hardware ................................ 38

STANDOFFS


Architectural Grade Materials & Finishes

Countertop, Panel & Architectural Signage Applications

Stainless Steel Aluminum Bronze(Brushed Finish) (Clear Anodized Finish) (Statuary Finish)

Countertop support Panel Installation Hardware Sign Hardware




STANDOFFS



Part No. Dia. (A) Height (B)

SO-AL-1CAP 1” 3/8”

SO-AL-1.25CAP 1 1/4” 1/2”

SO-AL-1.5CAP 1 1/2” 1/2”

SO-AL-2CAP 2” 5/8”

Aluminum CapStandard


SO-AL-1LPCAP 1” 3/8” Total (1/8” Exposed)

SO-AL-1.25LPCAP 1 1/4” 3/8” Total (1/8” Exposed)

SO-AL-1.5LPCAP 1 1/2” 3/8” Total (1/8” Exposed)

SO-AL-2LPCAP 2” 3/8” Total (1/8” Exposed)

Aluminum CapLow Profile

Ordering Notes

• Note that the height of the cap varies with the diameter• Custom sizes are available• Specify threaded connector length when ordering

Ordering Notes

• Low profile caps require a 1/2” hole for installation• Specify threaded connector length when ordering

B

.4

95

.25

0

A

5/16” - 18Tapped Hole

B

A





STANDOFFSwww.monarchmetal.com/products/standoffs/

Stainless Steel CapStandard

Stainless Steel CapLow Profile

Ordering Notes

• Standard stainless caps require a 7/16” hole for installation• Custom sizes are available• Specify threaded connector length when ordering

Ordering Notes

• Low profile caps require a 1/2” hole for installation• Specify threaded connector length when ordering

.18

8

B

.43

7

A


B

.4

95

.25

0

A



SO-SS-1CAP 1” 3/8” Total (3/16” Exposed)

SO-SS-1.25CAP 1 1/4” 3/8” Total (3/16” Exposed)

SO-SS-1.5CAP 1 1/2” 3/8” Total (3/16” Exposed)

SO-SS-2CAP 2” 3/8” Total (3/16” Exposed)


SO-SS-1LPCAP 1” 3/8” Total (1/8” Exposed)

SO-SS-1.25LPCAP 1 1/4” 3/8” Total (1/8” Exposed)

SO-SS-1.5LPCAP 1 1/2” 3/8” Total (1/8” Exposed)

SO-SS-2LPCAP 2” 3/8” Total (1/8” Exposed)






SO-SS-1NSCAP 1” 3/8”

SO-SS-1.25NSCAP 1 1/4” 1/2”

SO-SS-1.5NSCAP 1 1/2” 1/2”

SO-SS-2NSCAP 2” 5/8”

Stainless Steel CapNo Stem

Stainless Steel CapSecurity Cap

Ordering Notes

• Please note that you are ordering the “No Stem” cap when ordering• Custom heights available• Specify threaded connector length when ordering

Ordering Notes

• Security caps require a 7/16” hole for installation• (2) 3/32” holes for tightening with spanner wrench

B

.18

8

.4

37

A


A


B


SO-SS-1SECCAP 1” 3/8” Total (3/16” Exposed)

SO-SS-1.25SECCAP 1 1/4” 3/8” Total (3/16” Exposed)

SO-SS-1.5SECCAP 1 1/2” 3/8” Total (3/16” Exposed)

SO-SS-2SECCAP 2” 3/8” Total (3/16” Exposed)





Aluminum BarrelsStandard

Ordering Notes

• Custom heights available• Aluminum Barrels up to 1” in height are tapped thru, while 2” barrels and taller are tapped approximately 7/8” from each end

Part No. Dia. (A)

Height (B) 1” Dia. 1 1/4” Dia. 1 1/2” Dia. 2” Dia.

1” SO-AL-1BL-1 SO-AL-1.25BL-1 SO-AL-1.5BL-1 SO-AL-2BL-1



4” CUSTOM CUSTOM CUSTOM CUSTOM


B

A


Both Ends




Stainless Steel BarrelsStandard

Ordering Notes

• Custom sizes are available• Stainless Barrels up to 1.5” in height are tapped thru, while 2” barrels and taller are tapped approximately 3/4” from each end

Part No. Dia. (A)

Height (B) 1” Dia. 1 1/4” Dia. 1 1/2” Dia. 2” Dia.

1” SO-SS-1BL-1 SO-SS-1.25BL-1 SO-SS-1.5BL-1 SO-SS-2BL-1

1 1/2” SO-SS-1BL-1.5 SO-SS-1.25BL-1.5 SO-SS-1.5BL-1.5 SO-SS-2BL-1.5





B

A


Both Ends




Also Available

Mounting Hardware

Hanger BoltsPart Number Overall Machine Thread Wood Screw

Option A HB-A 1 1/2” 5/8” 7/8”

Option B HB-B 2 1/2” 1” 1 1/2”

Option C HB-C 4” 2” 2”

Tabletop Screw with AnchorPart Number Surface Thickness

Option A TT-A 1” Thick Surface

Option B TT-B 1.25” Thick Surface

Option C TT-C 1.75” Thick Surface

Ordering Notes

• Custom sizes are available• Ask for assistance from your sales representative

Hanger Bolts

Tabletop Screwwith Anchor

B

A B A C C

Vinyl Washers Vinyl Tube

RAINSCREENCLADDING

Overview...................................................... 40

Exposed Fastener System ................... 42

Concealed Fastener System ............... 43

RAINSCREEN CLADDINGOverview


Similar to the way a tent fly works, rain

screens sit away from a building’s exterior

and create a small air gap that helps

protect the original structure. Rainscreen

systems lend themselves well to energy

efficiency and weather protection, as

well as hassle-free installation and main

tenance.

Monarch Metal supplies a number of

aluminum substructure systems that

work seamlessly with rainscreens. Our

products are compatible with a variety of

panel thicknesses and are designed to

make mounting rainscreen systems

effortless.

RAINSCREEN CLADDINGOverview


The benefits of rainscreen systems include:

• Durable protection against severe weather• Excellent indoor and outdoor moisture management• Easy panel removal, repair, replacement• Cost-effectiveness and energy efficiency• Simple post-construction installation

CONTINUOUSAIRFLOW

The open joint cladding creates a gap that allows air to flow continuously, aiding in the removal of moisture and heat from rain or condensation.

Moisture

Heat

Rainscreen systems, like Trespa’s Meteon system, dually serve as protective facades and mitigation systems. They block solar gain and accommodate continuous insulation, making them energy savers that can reduce heating and cooling costs. They also help improve indoor air quality by reducing the amount of moisture that infiltrates a building, which keeps mold and other harmful contaminants from developing.

RAINSCREEN CLADDINGRainscreen System Features



Trespa TS-110 Exposed Fastener System

Features:

• Mounting system for Trespa Meteon drained and back ventilated rainscreen systems• Compatible with 6mm, 8mm, 10mm and 13mm panel thickness• J Channel 110-000 & Hat Channel 110-001 available in standard 10 foot lengths• Sold with 100-000 exposed panel fasteners painted to match the panel color• Certain Trespa systems in specific configurations meet the performance criteria of NFPA 285 • ICC-ES Structural Testing report available: ESR-1687• Substructure is LEED qualified and Trespa LEED information is available

110-000 J Channel

Top-down view

110-000 Hat Channel


RAINSCREEN CLADDINGRainscreen System Features


Trespa TS-210 Concealed Fastener System

Features:

• Mounting system for Trespa Meteon drained and back ventilated rainscreen systems• Compatible with 10mm and 13mm panel thickness• J Channel 110-000, Rail 200-000 and Adjustable Bracket 200-003 available• Sold with TU-S panel fasteners as needed by the end user in addition to the SFS installation tool• Certain Trespa systems in specific configurations meet the performance criteria of NFPA 285• ICC-ES Structural Testing report available: ESR-1687• Substructure is LEED qualified and Trespa LEED information is available

Top-down view Side view

110-000 J Channel 200-000 Rail 200-003 Adjustable Braket

http://www.monarchmetal.com/products/trespa-ts-210-concealed-fastener-system/http://www.monarchmetal.com/products/trespa-ts-210-concealed-fastener-system/

ARCHITECTURALMETALS

Angle: Aluminum, Stainless

and Steel ..................................................... . 46

Anodized Angle: Aluminum, Stainless

and Structural Shapes ............................ 53

Channel: Aluminum, Stainless

and Steel ...................................................... 55

Flat Bar: Aluminum, Stainless

and Steel ...................................................... 61

Diamond Tread Plates ........................... 66

Aluminum T Bar ....................................... 68

Aluminum Zees ........................................ 70

www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/








ALUMINUM ANGLEArchitectural Aluminum Angle


DIMENSION DIMENSION DIMENSION DIMENSION THICKNESS

A B A B t

1/2 x 3/8 1 1/2 1/2 1/8

1/2 3/4 1/81/2 1 1/8

1 1/2 1/81 1/2 3/16

5/8 x 5/8 1 1/2 1/4

3/4 x 3/8 1 3/4 1 3/4 1/83/8

3/4 2 1/2 1/83/4 3/4 1/83/4 1 1/8

1 3/167/8 x 7/8 1 1/2 1/8

1 1/2 3/161 x 1/2 1 1/2 1/4

1/2 2 1/8

1/2 2 3/163/4 2 1/4

1

1 2 1/2 1 1/2 1/811 2 1/2 2 1/8

2 3/161 1/4 x 1/2 2 1/4

3/4 2 1/2 1/81

x

xx

x

xx

xxx

x

xx

xxx

xxx

xxx 2 1/2 3/16

1 1/4 2 1/2 1/41 1/4

1 1/4

THICKNESS

t

1/16

1/161/8

1/8

3/321/8

1/163/321/8

1/8

1/163/32

1/81/81/16

1/83/161/4

1/81/81/8

1/83/16

1/4 2 3/4

x

x

x

x

x

x 1 3/4

x

xx

x

xxx

xx

xxx

xx

x

xx

xxx

x

x 1/4

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Anodized, Mirror Polished

xxx

xx

x

www.monarchmetal.com/products/architectural-aluminum-angle/

ALUMINUM ANGLEArchitectural Aluminum Angle



A B A B t

3 x 1/2

12

2

3 1/2 x

3 3 3

1 1/4

4 x 2

4

x

xxxxxx

x

x

x

THICKNESS

t

1/8

1/81/81/41/83/161/4

1/8

1/8

1/8

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Mirror Polished

5 x 3 x 1/8

www.monarchmetal.com/products/architectural-aluminum-angle/

ALUMINUM ANGLEStructural Aluminum Angle



A B A B t

3/4 x 3/4 2 2 1/8

3/16

1/45/163/8

1 1/4 x 1 1/4

1 1/2 x 1 1/2

x

x

x

THICKNESS

t

1/8

1/4

1/83/16

1/4

1/83/16

1/4

x x

3/8

Alloy : 6061 AluminumType : Equal Legs & Unequal LegsStd Lengths : 25'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Mirror Polished

3/16

1 1/2 x 1 x 1/4

1 1/2 x 1 1/4 x 1/8

3/161/4

1 3/4 x 1 1/4 x 1/81/4

1 3/4 x 1 3/4 x 1/83/16

1/4

2 x 1 1/2 x 1/83/16

1/4

1 1/23/16

x x

1/4

3/16

1/4

2 1/2 2 1/2 1/83/161/45/163/8

x x

1 x 1 x 1/8

3 2 3/161/43/8

x x

3 2 1/2x x 1/4

3/8

3 3 3/161/45/16

x x

1/2

2 1/2

2x x2 1/2

1/8

www.monarchmetal.com/products/structural-aluminum-angle/

ALUMINUM ANGLEStructural Aluminum Angle



A B A B t

3 1/2 x 2 1/2 x

THICKNESS

t

1/4

3/81/2

Alloy : 6061 AluminumType : Equal Legs & Unequal LegsStd Lengths : 25'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Mirror Polished

3 1/2 x 3 1/2 x 1/4

3/81/2

4 x 3 x 1/4

3/81/2

4 x 4 x 1/43/8

1/2

5 x 3 x 3/8

1/2

5 x 5 x 3/8

1/2

6 x 3 x 3/8

1/23 1/2 x

4 x 3/81/2

6 x 3/81/2

8 x 6 x 3/4

1/28 x

www.monarchmetal.com/products/structural-aluminum-angle/

STAINLESS STEEL ANGLEEqual & Unequal Leg Stainless Steel Angle



A B A B t

3/4 x 3/4 x

THICKNESS

t

1/8

3/16

Alloy : 304 or 316 AlloyType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed, Mirror Polished

1 x 1 x 1/83/161/4

1 1/4 x 1 1/4 x 1/83/161/4

1 1/2 x 1 1/2 x 1/83/161/4

2 x 2 x 1/83/161/43/8

2 1/2 x 2 1/2 x 3/161/43/8

3 x 3 x 3/161/45/163/81/2

4 x 4 x 1/43/81/2

5 x 5 x 3/8

6 x 3 x 3/86 x 3/8

3 1/2 x 3 1/2 x 1/4

www.monarchmetal.com/products/equal-unequal-leg-stainless-steel-angle/

STEEL ANGLEEqual & Unequal Leg Steel Angle



A B A B tTHICKNESS

t

Alloy : Mild SteelType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

1/2 x 1/2 x 1/8

3/4 x 3/4 x 1/8

1 x 1 x 1/83/161/4

1 1/4 x 1 1/4 x 1/83/16

1 1/2 x 1 1/2 x 1/83/161/4

1 3/4 x 1 3/4 x 1/83/161/4

2 x 2 x 1/83/161/45/163/8

2 1/2 x 2 1/2 x 3/161/45/163/81/2

3 x 2 x 1/43/81/2

2 1/2 x 1/43/81/2

3 x 1/43/8

1/2

3 1/2 x 2 1/2 x 1/41/2

3 x 1/41/2

3 1/2 x 1/41/2

4 x 3 x 1/43/8

4 x 1/43/81/2

5 x 3 x 1/45/163/81/2

www.monarchmetal.com/products/equal-unequal-leg-steel-angle/

STEEL ANGLEEqual & Unequal Leg Steel Angle



A B A B tTHICKNESS

t

Alloy : Mild SteelType : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

5 x 3 1/2 x 1/4

5/163/81/25/83/4

5 x 3/81/2

3/4

6 x 6 x 3/81/23/4

8 x 8 x 1/23/4

www.monarchmetal.com/products/equal-unequal-leg-steel-angle/

ANODIZED ANGLEStock Anodized Angle & Shapes



A B A B tTHICKNESS

t

Alloy : 6063 AluminumType : Equal Legs & Unequal LegsStd Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Clear Anodized

3/4 x 3/4 x 1/8

1 x 1 x 1/8

1 1/4 x 1 1/4 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 1 1/2 x 1/8

• Many More Anodized Shapes & Sizes Available •

• Please Call 631-563-8967 •

www.monarchmetal.com/products/stock-anodized-angle-shapes/

www.monarchmetal.com/products/stock-anodized-angle-shapes/

STAINLESS STEEL ANGLE - SHARP CORNEREqual & Unequal Leg Stainless Angle



A B A B tTHICKNESS

t

Alloy : Stainless Steel ASTM A1069/A1069M/11Type : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Bead Blasted as Mill, Brushed, or Mirror Polished

1 x 1 x 1/8

1 1/4 x 1 1/4 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 2 x 1/8

5 x 5 x 1/4

5 x 5 x 5/16

5 x 5 x 5/8

6 x 6 x 1/4

6 x 6 x 5/8

8 x 8 x 1/4

8 x 8 x 3/8

8 x 8 x 1/2

8 x 8 x 5/8

8 x 8 x 3/4

• Minimum Order Applies •

• Please Call 631-563-8967 •

www.monarchmetal.com/products/stainless-sharp-corner-angle/

STAINLESS STEEL CHANNEL - SHARP CORNERStainless Sharp Corner Channel


BASE BASE

A tFLANGE

BFLANGE

t1

10 x .240 x 2.600 x .4363 x .258 x 1.498 x .273.356 x 1.596 x .273

6 x .437 x 2.157 x .343

7 x .437 x 2.157 x .343

.314 x 2.194 x .366

.419 x 2.299 x .366

.210 x 2.090 x .366

8 x .220 x 2.260 x .390.303 x 2.343 x .390

9 x .233 x 2.433 x .413.285 x 2.485 x .413.448 x 2.648 x .413

.379 x 2.739 x .436 .526 x 2.886 x .436 .673 x 3.033 x .436

12 x .282 x 2.942 x .501 .387 x 3.047 x .501 .510 x 3.170 x .501

15 x .400 x 3.400 x .650

.520 x 3.520 x .650 .716 x 3.716 x .650

BASE BASE

A tFLANGE

BFLANGE

t1

Alloy : Stainless Steel ASTM A1069/A1069M/11Type : Equal Legs & Unequal LegsStd Lengths : 20'Custom : Available Punched with Holes or Cut to LengthFinishes : Bead Blasted as Mill, Brushed, or Mirror Polished

• Minimum Order Applies •

• Please Call 631-563-8967 •

www.monarchmetal.com/products/stainless-sharp-corner-channel/

ALUMINUM CHANNELAluminum Sharp Corner Channel ( “C Channel”/ “U Channel”)



A B A B tTHICKNESS

t

Alloy : 6063 AluminumType : Sharp CornerStd Lengths : 16', 8'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Mirror Polished

3/8 x 3/8 x 1/16

1/2 x 3/8 x 1/81/2 x 3/323/4 x 1/8

5/8 x 5/8 x 1/8

3/4 x 3/8 x 1/81/2 x 1/161/2 x 1/83/4 x 1/8

1 x 1/81 1/2 x 1/8

1 x 1/2 x 1/83/4 x 1/8

1 x 1/81 1/2 x 1/8

2 x 1/8

1 1/8 x 1 1/8 x 1/8

1 1/4 x 1/2 x 1/83/4 x 1/8

1 1/4 x 1/8

1 1/2 x 1/2 x 1/83/4 x 1/8

1 x 1/8

1 1/2 x 1/8

1 3/4 x 3/4 x 1/8

1 x 1/81 3/4 x 1/8

2 x 1/2 x 1/81 x 1/81 x 3/16

1 1/2 x 1/82 x 1/82 x 1/4

2 1/4 x 7/8 x 1/8

2 3/8 x 1 1/4 x 3/16

2 1/2 x 1 x 1/81 1/2 x 1/8

3 x 1/2 x 1/81 x 1/82 x 1/83 x 1/8

4 x 1 1/2 x 1/8

5 x 2 x 3/16

www.monarchmetal.com/products/aluminum-sharp-corner-channel-c-channel-u-channel/

ALUMINUM CHANNELAluminum Association Aluminum Channel


BASE BASE

A tFLANGE

B

Alloy : 6061 AluminumType : Aluminum AssociationStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Mirror Polished

FLANGE

t1

7 x .170 x 2 3/4 x .290

.210 x 3 1/2 x .3502 x .130 x 1 x .130

.170 x 1 1/4 x .260

3 x .130 x 1 1/2 x .200.170 x 1 3/4 x .260

4 x .150 x 2 x .230.190 x 2 1/4 x .290

5 x .150 x 2 1/4 x .260.190 x 2 3/4 x .320

6 x .170 x 2 1/2 x .290.210 x 3 1/4 x .350

8 x .190 x 3 x .350.250 x 3 3/4 x .410

9 x .230 x 3 1/4 x .350.290 x 4 x .440

10 x .250 x 3 1/2 x .410.310 x 4 1/4 x .500

12 x .290 x 4 x .470.350 x 5 x .620

.210 x 3 1/2 x .380

BASE BASE

A tFLANGE

BFLANGE

t1

www.monarchmetal.com/products/aluminum-association-aluminum-channel/

ALUMINUM CHANNELAmerican Standard Aluminum Channel



A B A B tTHICKNESS

t

Alloy : 6061 AluminumType : American StandardStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Mirror Polished

3 x 1.41 x .170

1.50 x .2581.60 x .356

4 x 1.58 x .1801.65 x .2471.72 x .320

5 x 1.75 x .1901.89 x .3252.03 x .472

6 x 1.92 x .2001.95 x .2252.03 x .3142.16 x .437

7 x 2.11 x .2302.19 x .314

8 x 2.29 x .250

2.34 x .3032.53 x .487

9 x 2.43 x .2302.65 x .448

10 x 2.60 x .2402.89 x .526

12 x 2.96 x .3003.05 x .3873.17 x .510

15 x 3.40 x .4003.72 x .716

www.monarchmetal.com/products/american-standard-aluminum-channel/

STAINLESS STEEL CHANNELStainless Steel Channel



A B A B tTHICKNESS

t

Alloy : 304 AlloyType : ASTM A 276Std Lengths : 20', RLCustom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish

1 1/2 x 3/4 x 1/8

2 x 1 x 1/81/4

3 x 1 3/8 x 3/161/41 1/2 x

4 x 1 3/4 x 1/4

6 x 3 x 3/8

www.monarchmetal.com/products/stainless-steel-channel/

STEEL CHANNELMild Steel Channel



A B A B tTHICKNESS

t

Alloy : Mild SteelType : ASTM A 36Std Lengths : 20', 40'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill

3 x 1.41 x .1701.50 x .2581.60 x .3561.94 x .312

4 x 1.58 x .1841.65 x .2471.72 x .3212.50 x .500

5 x 1.75 x .1901.89 x .325

6 x 1.92 x .2002.03 x .3142.50 x .3102.16 x .4373.50 x .3403.00 x .375

7 x 2.09 x .2102.19 x .3142.30 .419

8 x 1.88 x .1802.26 x .2202.34 x .3032.53 x .4873.03 x .4003.50 x .427

9 x 2.43 x .2332.49 x .2852.65 x .488

10 x 2.60 x .2402.74 x .3793.50 x .3122.89 x .5263.95 x .425

3.03 x .673

12 x 1.50 x .1902.94 x .2823.05 x .3873.17 x .5103.67 x .3703.77 x .4673.89 x .590

13 x 4.00 x .375

18 x 3.95 x .4504.00 x .500

www.monarchmetal.com/products/mild-steel-channel/

FLAT BARAluminum Flat Bar


DIMENSION

ATHICKNESS

t

Alloy : 6063 AluminumType : ASTM B 221Std Lengths : 16', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Anodized, Mirror Polished

DIMENSION

ATHICKNESS

t

1/8 x 1/81/23/4

11 1/41 1/21 3/4

23

3/16 x 3/161/23/4

11 1/41 1/21 3/4

2

1/4 x 1/41/25/83/4

11 1/2

22 1/2

34

3/8 x 3/83/4

11 1/2

22 1/2

34

1/2 x 1/23/4

11 1/41 1/2

2

3/4 x 3/41

1 1/41 1/2

1 x 1 1/2

www.monarchmetal.com/products/aluminum-flat-bar/

FLAT BARStainless Steel Flat Bar


1/8 x 1/8

1/4

1/25/83/47/8

11 1/41 1/21 3/4

22 1/2

3

1/4 x 1/43/81/25/83/47/8

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

5/16 x 5/16

1/23/4

11 1/41 1/21 3/4

22 1/42 1/2

34

3/8 x 3/81/25/83/4

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

44 1/2

56

3/8

DIMENSION

ATHICKNESS

tDIMENSION

ATHICKNESS

t

Alloy : 304 or 316 AlloyType : ASTM A 276/479Std Lengths : 12'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Mirror Polished

www.monarchmetal.com/products/stainless-steel-flat-bar/



DIMENSION

ATHICKNESS

tDIMENSION

ATHICKNESS

t

1/2 x 1/23/47/8

11 1/41 1/21 3/4

22 1/2

33 1/2

44 1/2

56

5/8 x 5/83/4

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

456

3/4 x 3/41

1 1/41 1/21 3/4

22 1/42 1/2

33 1/2

44 1/2

56

7/8 x 11 1/41 1/2

2

1 x 1 1/41 1/21 3/4

22 1/42 1/2

33 1/2

44 1/2





1 x 568

1 1/4 x 1 1/22

2 1/42 1/2

33 1/2

456

1 1/2 x 1 3/42

2 1/42 1/2

346

1 3/4 x 22 1/42 1/2

3456

2 x 2 1/42 1/2

3456

DIMENSION

ATHICKNESS

tDIMENSION

ATHICKNESS

t



FLAT BARBrass Flat Bar


DIMENSION

ATHICKNESS

t

Alloy : 360 AlloyType : ASTM B 16Std Lengths : 12'Custom : Available Punched with Holes or Cut to LengthFinishes : Mill, Brushed Finish, Mirror Polished

DIMENSION

ATHICKNESS

t

1/8 x 1/83/161/45/163/81/25/83/47/8

11 1/41 1/21 3/4

22 1/42 1/2

33 1/2

4

3/16 x 3/163/81/25/83/47/8

11 1/4

1 1/21 3/4

2

2 1/2

3/16 x 33 1/2

4

1/4 x 1/45/163/81/25/83/47/8

11 1/41 1/21 3/4

22 1/22 3/4

33 1/2

4

5/16 x 5/163/81/25/83/4

11 1/41 1/2

www.monarchmetal.com/products/brass-flat-bar/

DIAMOND-TREAD PLATESAluminum


THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

Alloy : 3003 Alloy or 6061 AlloyType : Diamond PatternStd Lengths : See BelowCustom : Available Cut to SizeFinishes : Mill or Bright Finish

THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

.063 x 48 x 9648 x 120

.100 x 48 x 96

.125 x 48 x 9648 x 120

.190 x 48 x 9648 x 120

.250 x 48 x 9648 x 120

.375 x 48 x 9648 x 120

.500 x 48 x 9648 x 120

www.monarchmetal.com/products/aluminum-diamond-tread-plates/

DIAMOND-TREAD PLATESStainless Steel


THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

Alloy : 304 AlloyType : Diamond PatternStd Lengths : See BelowCustom : Available Cut to SizeFinishes : Mill

THICKNESS WIDTH

t (Inches)LENGTH

(Inches)

.125 x 48 x 120

.188 x 36 x 12048 x 9648 x 120

.250 x 48 x 96

.375 x 48 x 96

www.monarchmetal.com/products/stainless-steel-diamond-tread-plates/

ALUMINUM TEESSharp Corner Aluminum T Bar



A B A B tTHICKNESS

t


3/4 x 3/4 x 1/8

1 x 1 x 1/8

1 1/4 x 7/8 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 3/4 x 1/82 x 3/162 x 1/4

www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/

ALUMINUM TEESStructural Aluminum T Bar



A B A B tTHICKNESS

t

Alloy : 6061 AluminumType : American StandardStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill

1 1/2 x 1 1/2 x 1/4

2 x 2 x 3/162 x 1/4

2 1/2 x 2 1/2 x 5/16

3 x 3 x 3/8

4 x 4 x 3/8

www.http://monarchmetal.com/products/structural-aluminum-t-bar/

ALUMINUM ZEESSharp Corner Aluminum Z Bar



A B A B tTHICKNESS

t


1/2 x 1/2 x 3/32

3/4 x 3/4 x 1/8

3/4 x 7/8 x 1/8

1 1/8 x 1 x 1/8

www.monarchmetal.com/products/sharp-corner-aluminum-z-bar/

ALUMINUM ZEESStructural Aluminum Z Bar



A B A B tTHICKNESS

t

Alloy : 6061 AluminumType : Sharp Corners, Radius on Interior AnglesStd Lengths : 25'Custom : Available Drilled with Holes or Cut to LengthFinishes : Mill

2 x 1 1/4 x 3/16

2 1/2 x 1 1/2 x 3/16

3 x 2 11/16 x 1/4

4 x 3 1/16 x 1/4

www.monarchmetal.com/products/structural-aluminum-z-bar/

CORNER GUARDS& KICK PLATES

Corner Guards .......................................... 74

Kick Plates ................................................. 75

www.monarchmetal.com/products/corner-guards/www.monarchmetal.com/products/corner-guards/

www.monarchmetal.com/products/kick-plates/www.monarchmetal.com/products/kick-plates/

CORNER GUARDSStainless Steel & Aluminum


DIMENSION DIMENSION PRICE STANDARD

A BTHICKNESS

t

Alloy : 304 Stainless, Aluminum, Diamond PlateType : 16 Gauge (Standard), 14 Ga., 18 Ga.Std Lengths : 4', 8'Custom : Available Punched with Holes or Cut to LengthFinishes : Brushed Finish, Mirror Polished

• Custom Shapes & Sizes Available •

• Please Call 631-563-8967 •

1 1/4 x 48 x 1/16 $31.35 16 Ga Stainless Steel, Adhesive Mounted1 1/4 x 96 x 1/16 $53.651 1/2 x 48 x 1/16 $36.941 1/2 x 96 x 1/16 $63.272 1/2 x 48 x 1/16 $55.902 1/2 x 96 x 1/16 $100.493 1/2 x 48 x 1/16 $78.823 1/2 x 96 x 1/16 $141.61

90 Angle˚

Bullnose3 1/2 x 48 x 1/16 $78.823 1/2 x 96 x 1/16 $141.61

90°SharpAngle

90°Rounded

Angle

A

t

B

t

A

B

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted

16 Ga Stainless Steel, Adhesive Mounted16 Ga Stainless Steel, Adhesive Mounted


KICK PLATESStainless Steel & Aluminum


Alloy : 304 Stainless, Aluminum, Bronze, BrassType : 18 Gauge (Standard), 16 Ga., 11 Ga.Std Lengths : See BelowCustom : Available with Rough Finish for Adhesive, Punched, or Punched & CountersunkFinishes : Mill, Brushed Finish, Mirror Polished

• Custom Shapes & Sizes Available •

• Please Call 631-563-8967 •

24 x 34 x 18 Ga. $38.6328 x 6 x 18 Ga. $16.0928 x 8 x 18 Ga. $18.7928 x 10 x 18 Ga. $26.8028 x 12 x 18 Ga. $32.1728 x 36 x 18 Ga. $90.9528 x 42 x 18 Ga. $130.5030 x 6 x 18 Ga. $17.2330 x 8 x 18 Ga. $20.1030 x 10 x 18 Ga. $28.7130 x 12 x 18 Ga. $34.4634 x 6 x 18 Ga. $19.5134 x 8 x 18 Ga. $22.7734 x 10 x 18 Ga. $32.5434 x 12 x 18 Ga. $39.0634 x 16 x 18 Ga. $48.2934 x 34 x 18 Ga. $107.9834 x 36 x 18 Ga. $107.9834 x 42 x 18 Ga. $124.5634 x 46 x 18 Ga. $124.5636 x 8 x 18 Ga. $23.6236 x 10 x 18 Ga. $34.4636 x 12 x 18 Ga. $41.34

DIMENSION DIMENSION PRICE STANDARDA B

THICKNESS

t

A

Bt

Armor PlateMop PlateKick PlateKick PlateKick Plate

Armor PlateArmor PlateMop PlateKick PlateKick PlateKick PlateMop PlateKick PlateKick PlateKick PlateKick Plate

Armor PlateArmor PlateArmor PlateArmor PlateKick PlateKick PlateKick Plate

TYPE

18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes18 Ga Stainless, No Holes

www.monarchmetal.com/products/kick-plates/

WALL PANEL SYSTEMS Four DifferentLooks for Reveals

Stainless Wall Panel Systems

Sharp Corner Stainless Steel Profiles

NEW PRODUCT

(Page 25)

(Page 54)

(Page 19)

NEW PRODUCT

Monarch Metal Fabrication • 1625 Sycamore Ave, Bohemia, New York 11716 • United States of America

(631) 750-3000 • (631) 563-8976 • [email protected] • www.monarchmetal.com

www.monarchmetal.com/products/easy-wall-panel-systemwww.monarchmetal.com/products/easy-wall-panel-system










Wall Panel Mounting Systems


Monarch Metal 1625 Sycamore Ave Bohemia, New York 11716 (631) 750 3000 [email protected]

Documents

www .monar chmetal.com (631) 7 5 0 -3 0 0 0