WFC 10 CNC

The WFC 10 CNC is a new type of the machine, which is built on a sliding

guiding

WFC 10 CNC

• is a continuously controlled cross-type machine of the up-to-date design, ideal for the powerful complete machining of work pieces up to 5 tons 11 023 lb.

WFC 10

• V – RAM TRAVEL• W – SPINDLE TRAVEL• X – TABLE TRAVEL• Y – SPINDLEBOX TRAVEL• Z – COLUMN TRAVEL

Z axis

• The frame of this machine is seated on a firm stand and linked with a bed in the axis X.

• Z = 1250 mm, 49.2 In

X axis

• Workpiece motion is performed by a special cross-type machine execution, where the plate of the rotary table is moved along the axes X and Z.

• 45° Support on linear ways

• X = 1250 mm, 49.2 In or 2000 mm, 78.74 In

Column

• Fixed column• Y = 1250 mm, 49.2 In or

1700 mm, 66.9 In

Headstock• The headstock is fabricated

from a special ductile iron and is driven by an asynchronous servomotor with continuous regulation of revolution

• W = 730 mm 28.7 In• 3000RPM (till 500 mm run

out) • 2000RPM (500-730 mm)• 17kW 22 HP or

22 kW 29.5 HP

Headstock

Table

• Max table load 3 or 5 tons

• Table dimesions• 1000x1120 mm

39.3x44 In• 1200x1400 mm

47.2x55.1 In

CNC control system

• HEIDENHAIN iTNC 530 or TNC 620

• FANUC 31i or 32i• 15´´ LCD display

CoolantLow Pressure Cooling (outside coolant)•Coolant Pressure 6 bar (coolant tank output) •Max. Delivered Quantity 62 l/min •Coolant Tank Capacity 550 l

High Pressure Cooling (through spindle)•Coolant Pressure 20 / 30 / 50 bar •Max. Delivered Quantity 25 / 37 / 60 l/min •Coolant Tank Capacity 220 l

Eletric box

• The electric equipment is consistent with CE, CSA or UL certifications.

• Air conditioned distribution box

Automatic tool changer

• 20 tools• 32 tools

OHM 20

• Orthogonal two-axes manual head

• Power 20kW• Speed 2000/min• 1:1 gear transfer• SK 50 (DIN, MAS, ANSI)• Manual tool clamping

PHM 20

• Right angle manual head

• Power 20kW• Speed 2000/min• 1:1 gear transfer• SK 50 (DIN, MAS, ANSI)• Manual tool clamping

UHM 20

• UHM 20• Universal manual head• Power 20kW• Speed 2000/min• 1:1 gear transfer• SK 50 (DIN, MAS, ANSI)• Manual tool clamping

Chip conveyor

• Belt type

Transport and installation

• Small version fits in One container

• Fast installation

Layout

Foundation plan

Thank you for your attention

Fermat

www.fermatmachinery.com

+420 774 339 345america@fermatmachinery.comPrůmyslová 11,102 00 PRAGUE 10Czech Republic

Lucas Precision

www.lucasprecision.com

216 451 5588Fermat.Sales@LucasPrecision.com13020 St. Clair AvenueCleveland OH 44108-2033