Welcome to Hölzel - hoelzel-stanz.de · PDF fileProject consulting, development and implementation in die making • High-performance modular progressive stamping dies • Modular

Welcome to Hlzel
The company at a glance
Stanz- und Feinwerktechnik

Project consulting, development and implementation in die making
High-performancemodularprogressivestampingdies Modularprogressivedieswithintegratedassembly Modularprogressivestackingdies Systemdiesforsamplesandsmallseries Ceramicpunchesandguidingelements Fullyintegrateddiemonitoring Grindingintervalsupto30mill.stampedparts Productionspeedupto4.000spm,inthefieldof progressivestackingupto1.400spm
Progressive Die Making
Competency in precision

Consulting, series production, purchase of material, plating, logistics
Equipment: High-speedprecisionpunchpresses pressforceupto800kN Imageprocessingsystemsforcontinuous qualitymonitoring State-of-the-artperipheralequipment
Qualityassurance Air-conditionedmeasuringroom, high-precisionmeasuringinstruments Sampleswithinitialtestreport, samplingpursuanttoPPAP Statisticalprocesscontrolequipmentand processcapabilitystudies ContinuousSPCmeasurementsduringproduction Coordinationofmeasuringtechniqueswith thecustomer
Series production of stamped parts
Highest quality

HLZEL Stanz- und Feinwerktechnik GmbH + Co. KG Calwer Strae 38 | D-72218 Wildberg | Postfach 41 | D-72214 Wildberg Telefon: 07054/9299-0 | Telefax: 070 54/2716e-Mail: [email protected] | Internet: www.hoelzel-stanztechnik.de
Job-order production on the basis of drawings
OpticalProfilegrinding Jiggrinding Creepfeedgrinding Flatgrinding Cylindricalgrinding Wirecutting,EDM Milling,jigboring,turning Microblasting,polishing
Precision engineeringStanz- und Feinwerktechnik

Our expert knowledge - your success
Hlzel satisfies the most demanding customer requests and solves the most difficult problems in a reliable way, be it during the stage of project consulting, tool development or prototype manufacturing. Giving advice to our customers in every possible way and promoting the trustful cooperation with them enjoys the highest priority in our company. Our customers can benefit indeed from Hlzels long-standing expertise. The experience gained over decades and our activities pursued in the field of new developments have ensured that Hlzels high-performance precision dies distinguish themselves by their high degree of reliability and endurance.
Our high-performance dies achieve a production speed of up to 4.000 spm on specially designed high speed presses.
Progressive die making
Deep-drawing die: 6 drawing stages and a cutting station on the side; 250 spm

We are specialized in high-performance progressive punching dies, in-die part assembly and progressive stacking dies as well as in satisfying other customized requirements. The modular design of the plug-in technology and fully integrated die monitoring systems are the standard at Hlzels. All active elements are manufactured in series from tungsten carbide. However, ceramic items may also be employed as cutting and/or guiding elements, depending on the material thickness and the stroke rate. This allows blanking without lubrication, at higher stroke rates and over longer production runs.
The modular die design according to the Hlzel standard reduces the development and manufacturing input to a minimum. The manufacturing department has a stock of more than 150 internal Hlzel standard parts at its disposal which will decrease the processing time until die completion considerably.
If a lower number of stamping parts is required, we can offer our customers Hlzel-owned universal dies, thus allowing the customer to benefit from Hlzels usual precision and quality at a reaso-nable price in relation to the number of pieces processed.
Spares can be speedily replaced without any rework. Depending on the actual situation, Hlzel guarantees a service life of up to 30 mill strokes for its dies after the relevant maintenance intervals.
Stanz- und FeinwerktechnikHLZEL Stanz- und Feinwerktechnik GmbH + Co. KG Calwer Strae 38 | 72218 Wildberg | P. O. Box 41 | 72214 Wildberg | Germany
Phone: +49 (0)7054/9299-0 | Fax: +49 (0)70 54/2716e-Mail: [email protected] | Internet: www.hoelzel-stanz.de
N
exx
us
| 1868-1
15 |
9.0
5
Assembly in the progressive die: Production and assembly of a 0.2 mm spring steel strip with a 1.75 mm steel strip; 2 parts per stroke; 500 spm

Our capacity - your success
Precision machining is a wide-ranging field in which Hlzel represents the extension of your own facility on the one hand and turns complete customer designs into production on the other.
We manufacture on the basis of your drawings and specifications or develop your ideas jointly with you from their introduction into production right thru to the finished product.
You will benefit from our skills and resources in the development department, in tool manufacturing and in the production of stamping parts. Do make use of our tool-making capacities by out-sourcing jobs on CMT basis. Moreover, we will manufacture spares for your own dies on the basis of your drawings.
Hlzel manufactures mechanical components from the minimum number of 1 up to medium-sized series, either as single units or parts completely fitted into assemblies.
Precision machining
Examples for our competence as regards precision: Spares for die-making as well as for precision engineering and measuring instrument construction

N
exx
us
| 1868-1
15 |
9.0
5
We use the following manufacturing techniques:
l Optical profile grinding l Jig grinding l Creep feed grinding l Flat grinding l Cylindrical grinding l Wire cutting, EDM l Milling, jig boring, turning l Blanking and bending in feed dies l Blanking and bending in progressive diesl Scrubbing, barrel finishing l Micro blasting, polishing
When it comes to complementing our techniques by heat treatment and plating processes, we can rely on the long-standing business relations with our supplier base.
We process high-alloy tool steel, tungsten carbide and ceramic as well as all kinds of non-ferritic and ferritic metals for sheet metal processing.
The degree of accuracy achieved with the relevant surface quality is better than 0.002 mm.
Stamping parts machined and completely assembled

Our experience - your success
The production department for stamping parts employs experienced die makers in three shifts who operate the most advanced automatic high-speed punching presses.
The production department is equipped with:
l automatic punching presses from Bruderer with a tool length of up to 1.100 mm, a compressive force of 500 kN and a state-of-the-art peripheryl automatic punching presses from Yamada Dobby with a maximum rate of 2.500 spml image processing systems for a 100% control of the stamping partsl C-molding presses with up to 800 kN for the production of small series
Series production of stamped parts

Product quality is continuously monitored in an air-conditioned measuring room by way of a CAQ system. This is further supported by high-precision measuring instruments and the latest data processing systems.
l samples with initial test report, sampling in accordance with PPAP l statistical process control - machine and process capability studies
l continuous SPC measurements during production l coordination of the measuring techniques with the customer l manufacturing of special test devices and gauges
Manufacturers of the electrical, telecommunication, automotive and clock industries count among our customers.
l Apart from the actual series production, Hlzel can also provide the entire logistic which covers the purchase of the material, the plating process, the product-specific
packaging, the safe shipping and the timely delivery of the goods, as requested by the customer. Please get in touch with us for competent and comprehensive advicel Hlzel makes just-in-time, daily, weekly and on-call deliveries
N
exx
us
| 1802-1
15 |
9.0
5

Our competency - your success
Hlzel does not only solve the most difficult problems in the fields of project consulting, prototype manufacturing and others, it also satisfies the most demanding customer requirements with great reliability at the same time.
In the field of progressive stacking engineering, Hlzel has developed a solution by which productivity is increased a 100% as compared with conventional stamping tools. A patented technique for the in-feed and discharge of stacking punches will allow output rates of up to 1.400 spm.
Hlzel develops and manufactures modularly designed progressive stacking dies for lengths of up to 1.100 mm and a press force of up to 500 kN, in single or multi-row.
Progressive stacking dies

Stanz- und FeinwerktechnikHLZEL Stanz- und Feinwerktechnik GmbH + Co. KG Calwer Strae 38 | 72218 Wildberg | P. O. Box 41 | 72214

Documents

Welcome to Hölzel - hoelzel-stanz.de · PDF fileProject consulting, development and implementation in die making • High-performance modular progressive stamping dies • Modular