We Are Green… Modular Lighting Modular Lighting MODULAR INTERNATIONAL MODULAR INTERNATIONAL

We Are Green…We Are Green…

Modular Lighting Modular Lighting

MODULAR INTERNATIONALMODULAR INTERNATIONAL

These new work fixtures conform to USA standards and are designed for mounting in plaster, gypboard, or acoustical ceilings – trimmed or trimmless - Metal Halide and LED are today’s most energy efficient lamps, however low voltage MR11 and MR16 dichroic, and AR70 metal reflector lamps to 75 watts or AR111 metal reflector lamps to 100 watts, may also be used. Standard fixtures accept two shielding media.

Modular International, IncModular International, Inc

Transformer Incorporated™

TA (transformer accessible™) – LV Halogenby Modular International, IncTA (transformer accessible™) – LV Halogenby Modular International, Inc

• Fixtures in this new work / old work series permit installation of fixture and transformer through a hole larger than the housing but smaller than the trim, so that no patching is required. Standard fixtures accept two shielding media.

RA (remote accessible™) – LV Halogenby Modular International, IncRA (remote accessible™) – LV Halogenby Modular International, Inc

• This remote transformer group is suitable for new / old USA applications, and conforms to European and Asian standards. Fixtures are held in place by flat-spring clips that expand above the mounting frame and ceiling material, allowing easy access to incoming 12-volt wiring. Transformers should be located where they are easily accessible. Standard fixtures accept two shielding media.

Today’s Energy Efficiency and Eco Design based on:Today’s Energy Efficiency and Eco Design based on:

Green Light

Source

LED Fluorescen

tMetal

Halide

Modular InternationalModular International

today’s most energy efficient lamps

Visit us at:

ModularInternational.comModularInternational.com

GLASS + GLASS introducing MARBLE + GLASS™

New Innovative Marble

eco-Lighting Technology

www.GLASSplusGLASS.com

New Technology Passing Light thru Marble: Individual Panels

Complete Walls

Table Lamps

Floor Lamps

Custom Elements

Glass + Glass Introduces Marble + Glass ™

New Innovative Marble eco-Lighting Technology

Ecology, technology, transparency – their fusion yields a product and ambiance unique in the industry. Light radiating from within veined marbles, exploiting their crystalline qualities, produces a soft, textured glow.

The surprise is versatility. Marble + Glass creations are adaptable to hundreds of lighting needs, from functional to purely decorative. To serve applications both delicate and robust, some 200 marble patterns and countless color diffusions are available.

glassplusglass.com 212-288-3300

Glass + Glass Introducing Marble + Glass™


Passing light through the crystalline wonder of marble is the latest innovation to capture the industry’s imagination.





Color coatings between the 2mm natural marble layers and a 3mm glass base produce effects never before achieved. With hundreds of marble patterns and colors to use in combination, objects and effects produced by Marble + GlassTM technology are always one of a kind.




Unlimited possibilities for custom interiors, unique patented cutting-edge technology allows incredible color customization by inserting coating between 2 mm marble layers and glass base.








These new work fixtures conform to USA standards and are designed for mounting in plaster, gypboard, or acoustical ceilings – trimmed or trimmless - Metal Halide and LED are today’s most energy efficient lamps, however low voltage MR11 and MR16 dichroic, and AR70 metal reflector lamps to 75 watts or AR111 metal reflector lamps to 100 watts, may also be used. Standard fixtures accept two shielding media.

ModularInternational.com

TransformerTransformer IncorporatedIncorporated


Fixtures in this new work / old work series permit installation of fixture and transformer through a

hole larger than the housing but smaller than the trim, so that no patching is required. Standard

fixtures accept two shielding media.


TA (transformer accessible) - LV HalogenTA (transformer accessible) - LV Halogen

Modular IntentionalModular Intentional

This remote transformer group is suitable for new / old USA applications, and conforms to European and Asian standards. Fixtures are held in place by flat-spring clips that expand above the mounting frame and ceiling material, allowing easy access to incoming 12-volt wiring. Transformers should be located where they are easily accessible. Standard fixtures accept two shielding media.


RT (remote transformer) - LV HalogenRT (remote transformer) - LV Halogen

GLASS + GLASS introducing MARBLE + GLASS™

New Innovative Marble

eco-Lighting Technology

www.GLASSplusGLASS.com

New Technology Passing Light thru Marble: Individual Panels

Complete Walls

Table Lamps

Floor Lamps

Custom Elements

Glass + Glass Introduces Marble + Glass ™


Ecology, technology, transparency – their fusion yields a product and ambiance unique in the industry. Light radiating from within veined marbles, exploiting their crystalline qualities, produces a soft, textured glow.

The surprise is versatility. Marble + Glass creations are adaptable to hundreds of lighting needs, from functional to purely decorative. To serve applications both delicate and robust, some 200 marble patterns and countless color diffusions are available.




Passing light through the crystalline wonder of marble is the latest innovation to capture the industry’s imagination.





Color coatings between the 2mm natural marble layers and a 3mm glass base produce effects never before achieved. With hundreds of marble patterns and colors to use in combination, objects and effects produced by Marble + GlassTM technology are always one of a kind.




Unlimited possibilities for custom interiors, unique patented cutting-edge technology allows incredible color customization by inserting coating between 2 mm marble layers and glass base.

Documents

We Are Green… Modular Lighting Modular Lighting MODULAR INTERNATIONAL MODULAR INTERNATIONAL