Upload
waterous
View
307
Download
19
Tags:
Embed Size (px)
DESCRIPTION
Waterous Vehicle Mounted Pumps Brochure 10/09
Citation preview
Corporate Headquarters125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456
651-450-5000
www.waterousco.com
F-2606 (10/09)
Waterous has you covered with Total
Integration – a comprehensive program
that ensures fire departments have
everything needed from specification
to implementation. Total Integration
guarantees the right equipment, proper
installation, thorough education and
lifetime support with zero exceptions.
1 - EVALUATEWaterous assesses existing equipment, short and long term needs, fire scenarios and other factors to create an accurate, up
to date evaluation of the situation.
2 - PROPOSEWaterous studies the data and objectives to create a fire suppression equipment specification program that meets the
needs and respects the budget.
3 - IMPLEMENTWaterous takes proactive measures to provide the best possible circumstances for proper equipment installation/retrofitting for optimum performance and
longevity.
4 - ORIENTATEWaterous provides thorough equipment orientation ensuring fire departments get the best performance with the safest operation. Waterous also offers the only
CAFS instructors in the industry.
5 - SUPPORTWaterous backs its equipment with industry leading warranties, including 5-year coverage for pumps, 2-year coverage for Advantus®, 1-year coverage for Aquis™,
lifetime call support on all products, and, in addition, Waterous offers the Total Protection Package (TTP-5) that increases the coverage to include labor expenses to dismantle, remove and reinstall covered products or parts.
Contents in this brochure are subject to change without notice.
ENDURANCE™ I MIDSHIP I PTO I ARFF I HL SERIES I ACCESSORIES
Responding to a fire is no time to discover that you have an
unreliable piece of equipment. That’s why more firehouses
around the world depend on Waterous fire pumps than any other
option. With thousands in use, Waterous fire pumps are proven to
be rugged, reliable and revolutionary in design.
Every Waterous fire pump comes with an industry-exclusive
5-year warranty along with the features, accessories
and power fire departments need to suppress the
most dangerous fires.
Never be caught with anything less than the best.
Specify the most trusted fire pump – Waterous.
IN THE HEAT OF THE FIRE,WATEROUS VEHICLE-MOUNTED FIRE PUMPS DELIVER.
CONTROL PANEL
CONTROL PANEL
Ball-Type Transfer Valve
• Available with optional electric actuator
• Spring-loaded floating seal does not
jam due to sand in the water
Discharge Valve
• Available in 2-1/2 inch standard, 2-1/2 inch full-flow,
and 3-1/2 inch sizes
• Available with Rack-and-Sector push/pull controls,
manual worm gear and electric actuators
• Worm gear and electric actuators comply with
NFPA requirements for slow actuation
• All use chrome-plated bronze valve balls
• Lasts longer, resists scratching and scoring from
sand and grit
•Spring-loaded floating seal assemblies
• Seals tight, no adjustments required
Eclipse™ CAFSystems• Easy-to-learn, pre-plumbed, pre-mounted, pre-calibrated
complete compressed air foam system
• Available on CS, CSU and CMU midship-mounted fire pumps
• Advantus® Foam System
• 200 SCFM rotary-screw air compressor encapsulated in oil sump
saves valuable compartment space
• Powered off the main pump via a “hot-shift” pneumatic clutch
• Engage or disengage with pump running
• Toothed-belt drive requires no lubrication or maintenance
Advantus® Foam System
• Complete aspirated foam system
• Available 3 GPM (11.3 l/min) or 6 GPM
(22.6 l/min) @ 150 psi (10 bar) foam output
• Stainless steel manifold
• Hydra-Cell foam pump
• 4-sensor technology
• Full-flow brass body check valve
• 16-bit mixed signal microcontroller
• Onsite and online laptop diagnostics
• Maximum operating pressure: 450 psi (32 bar) *
• Pre-plumbed, pre-calibrated, pre-tested
• Factory-mounted to midship fire pump
• Saves valuable compartment space
* High pressure 600 psi version available
F O A M S Y S T E M S
C A F S y s t e m s ™
Aquis™ Foam Proportioner• Complete aspirated foam system
• Available 1.5 GPM (5.68 l/min) or
2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output
• Stainless steel paddlewheel flow meter
• 16-bit mixed signal microcontroller
• Blue LED illuminated operator panel
(standard on 2.5 models)
• Onsite and online laptop diagnostics
• Maximum operating pressure: 450 psi (32 bar)
Tank-to-Pump Valve• 3-1/2 inch full flow
• Chrome-plated bronze ball
• Spring-loaded floating seal assembly
C20 Transmission• High-strength aluminum construction
• “Silent” Morse HV drive chain
• Smoother transfer of power
• 16,000 lb./ft. torque rating
Overheat Protection Manager (OPM)• Opens when water inside the pump reaches 140º F (60º C)
• Flashing warning light on pump panel is triggered when
water reaches 180º F (82º C)
• Water is released to ground
O P T I O N A L P R O T E C T I O NZinc Anode• Optional corrosion protection
• Fits any unused intake pad or pipe
tap in the intake fittings
Zinc Intake Screen• Replaceable corrosion protection
Pneumatic Shift• Spring-loaded locking control prevents
accidental movement
• Dual-action cylinder stays in
position in case of air loss
Discharge Relief Valve• ON - OFF valve
• Indicating lights
• Panel-mounted strainer
Priming Systems• VPO oil-free primer
• Fast, dependable priming
• Electrically driven
• Operates independently from the pump
• Lubrication option (requires
priming-tank)
• Vacuum activated priming valve
CONTROL PANEL
CONTROL PANEL
Intake Relief Valve• Pilot-operated for improved performance
• Easy to set with pressure scale markings
• Panel-mounted strainer
Monarch Intake Valve• Manual, electric or pneumatic operation
• Stainless steel Wafer-Sphere element
• Polymeric flexible lip seal
- Resists “bonding” to moving element
• Includes provision for pre-butterfly relief valve
Impeller Shaft Assembly• Outboard ball bearing
• Labyrinth-type reverse flow wear rings
• Optional flame-plated impeller hubs
(Standard on CMU, CSU)
- Both reduce water bypass loss and
result in longer life
• Optional mechanical shaft seals
- No routine maintenance required
• Separable impeller shaft
- Reduces downtime for repairs
OVERHEAD
The fully manifolded Endurance CSC20 is 16% lighter than its predecessor. Additionally,
it features a smaller footprint to meet the ever-increasing demands for space on a fire
apparatus without sacrificing power, performance or utility.
CS FLOW SPECS:
• 1250 GPM @ 150 psi
• 4750 l/min @ 10 bar
CSU FLOW SPECS:
• 2250 GPM @ 150 psi
• 8550 l/min @ 10 bar
• Lighter weight
• Smaller footprint
• New C20 transmission is 40 lbs. lighter than the C10 transmission
• Uses just 9 quarts of oil (compared to 14 quarts in the C10)
• Operates at a very cool 175° F, versus a more common 200° F• New Allison Transmission MY09 software/wiring package creates a true neutral position
for improved pump shifting - Contact your OEM to assure you receive this feature.
• New shifting mechanism requires fewer parts
Waterous never stands pat on innovation. Our new
line of fully re-engineered Endurance™ fire pumps is
testament to that. It represents the next generation
in single stage pump thinking. Each model in
the Endurance line has been rethought and
manufactured to deliver more power, performance,
usability and versatility. At Waterous, we believe
it is our duty to push the limits. Endurance fire
pumps do just that, without sacrificing reliability,
longevity or ease of operation.
With the introduction of a new “Ram Horn” style intake fitting, the CX can provide
up to 1500 GPM at 150 PSI. Of course, that’s providing you use both inlets of the
“Ram Horn” fitting.
CXS FLOW SPECS:
• 1500 GPM @ 150 psi
• 5700 l/min @ 10.3 bar
• New “Ram Horn” style intake
• CAFS-capable with a Waterous 150 CFM CAFSystem™
• New C20 transmission is 40 lbs. lighter than the C10 transmission
("K" transmission shown)
• Uses just 9 quarts of oil (compared to 14 quarts in the C10)
• Operates at a very cool 175° F, versus a more common 200° F• New Allison Transmission MY09 software/wiring package creates
a true neutral position for improved pump shifting -
Contact your OEM to assure you receive this feature.
• New shifting mechanism requires fewer parts
The smart addition of the new "Ram Horn" style intake allows for easier
OEM installation and drafting from either side of the truck. Despite the
added versatility, the overall footprint has been significantly
reduced, creating more compartment space
for additional equipment.
S101 FLOW SPECS:
• 2000 GPM @ 150 psi
• 7570 l/min @ 10 bar
• New “Ram Horn” style intake
• Smaller footprint
• Easier OEM installation
• Dual-side drafting
• New C20 transmission is 40 lbs. lighter than the C10 transmission
• Uses just 9 quarts of oil (compared to 14 quarts in the C10)
• Operates at a very cool 175° F, versus a more common 200° F• New Allison Transmission MY09 software/wiring package creates a true neutral position
for improved pump shifting - Contact your OEM to assure you receive this feature.
• New shifting mechanism requires fewer parts
YOU DON'T STAY AHEAD BYFALLING BACK ON OLD DESIGNS.
SINGLE-STAGE FIRE PUMPS
SINGLE-STAGE FIRE PUMPS
CSC20 - THE LIGHTER FIRE FIGHTER.CXS - WE MADE IT BETTER. THEN WE MADE IT SMALLER.
S101C20 - LEANER, LIGHTER. NEVER WEAKER.
S100C20
S100D
The low-profile midship two-stage series / parallel
pump with ball-type transfer valve allows you to
switch from pressure to volume smoothly and easily.
CM FLOW SPECS:
• 500, 750, 1000 and 1250 GPM @ 150 psi
• 1900, 2850, 3800 and 4750 l/min @ 10.3 bar
CMU FLOW SPECS:
• 1500, 1750, 2000 and 2250 GPM @ 150 psi
• 5700, 6625, 7750 and 8550 l/min @ 10.3 bar
• Flame-plated impellers (standard on CMU, optional on CM)
• Two-piece, horizontally-split, high-tensile strength
cast iron pump casing
• Optional bronze pump casing
• All deep-groove oil and grease lubricated ball
bearings located outside the pump casing
• Bronze double-hubbed accurately balanced impellers
• Stainless steel separable impeller shaft
• Replaceable bronze impeller rings
• Flinger rings mounted on impeller shaft
• Adjustable BFG packing standard (spring-loaded mechanical seal available)
Versatile and adaptable, the CX can be mounted midship or in front of the
engine if needed. The CX can even be used as a PTO pump or direct-engine
mounted. It’s an ideal solution for specialty applications or tight spaces.
CX FLOW SPECS:
• 750 to 1250 GPM @ 150 psi
• 2850 to 4750 l/min @ 10.3 bar
• Pressures to 350 psi (24.1 bar)
• End-suction/vertically-split volute
• Self-adjusting mechanical seal
• Mechanically and hydraulically
balanced impeller
• Replaceable bronze impeller rings
• Optional flame-plated impeller
Waterous midship pumps provide fire industry
professionals with easy-to-operate systems that
offer the most efficient water delivery system
on the market. Admired for their craftsmanship
and exclusive design features, Waterous midship
pumps have become the primary firefighting tools
of fire departments around the globe.
A PUMP FOR EVERY APPLICATION.MIDSHIP FIRE PUMPS
MIDSHIP FIRE PUMPS
CM/CMU PUMP
CX PUMP
A simple-to-operate, efficient-to-run and easy-to-
depend on single-stage pump that’s perfect for
applications that require a little less power.
CGVGPA FLOW SPECS:
• 750 GPM @ 150 psi for NFPA 1901
• 2850 l/min @ 10.3 bar
• 500, 600 and 700 GPM for NFPA 1902
• 1900, 2250 and 2650 l/min
• All deep-groove, oil-and-grease-lubricated ball bearings located outside the pump casing
• Bronze double-hubbed accurately balanced impeller
• Stainless steel shaft
• Replaceable bronze wear rings
• Bronze-fitted, high-tensile strength cast iron pump casing
• Optional bronze pump casing
• Self-adjusting mechanical seal
• Flinger rings mounted on impeller shaft
• 5-year warranty
Get the power and performance of a traditional midship fire pump in a compact,
lightweight design. Made of ductile iron, the S100C20 and S100D are nearly 35%
lighter, and yet 25% stronger than identical pumps made with gray iron. Available as
a direct-engine mount or matched with a Waterous C20 aluminum case transmission.
S100C10 FLOW SPECS:
• Up to 2000 GPM @ 150 psi
• Up to 7600 l/min @ 10.3 bar
S100D FLOW SPECS:
• Up to 2000 GPM @ 150 psi
• Up to 7600 l/min @ 10.3 bar
• Cast ductile iron body
• Dual stripping edge volute
• Passive lubrication system
• Self-adjusting mechanical seal
• Replaceable bronze wear rings
• Mechanically and hydraulically balanced impeller
• All deep-groove anti-friction ball bearings, oil-splash lubricated
• 5-inch ANSI flange or optional end-flanged discharge manifold
• 5-year warranty
S100C20/S100 PUMP
CGVGPA PUMP
CPK4 PUMP
CGVK PUMP
CXK PUMP
CLK PUMP
Driven by a transmission-side-
mounted PTO, the CPK2 can
also be powered by optional
direct-engine mount. Able to
accommodate multiple lines
for straight stream or fog
nozzles.
A compact two-stage pump
with “pump and roll” capability
making it ideal for extinguishing
grass and brush fires.
FLOW SPECS:
• 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow
• 60 GPM (227 l/min) @ 400 psi (28 bar) Maximum Pressure
FLOW SPECS:
• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow
• 60 GPM (227 l/min) @ 800 psi (55 bar) Maximum Pressure
• Optional bronze pump casing
• Multiple gearbox mounts (horizontally, vertically, or inverted)
• Ten optional speed-increasing transmission ratios
• Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears
• 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)
• Bronze double-hubbed precision-balanced impeller
• 3-inch NPT or BSP intake; 2-inch NPT or BSP discharge
(BSP threads available straight or tapered)
• 5-year warranty
• High tensile, one-piece, close-grained gray iron casing (bronze optional)
• Bronze double-hubbed, precision-balanced impellers.
• Separable impeller shaft for ease of serviceability.
• Push/pull manual bronze transfer valve (in bronze housing)
• Available in either rotation of input shaft
• 4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter
(or 2.5 inch tapped flange) discharge
• PTO or direct-engine, bell-housing mount
• Ten optional speed-increasing transmission ratios
• 5-year warranty
Provide true "pump and roll" capability while
reducing transmission wear on your apparatus by
adding a PTO fire pump to your firefighting arsenal.
Available in multiple sizes and styles, Waterous
has a PTO fire pump to fit your requirements and
apparatus set-up perfectly.
PUMPING ON THE GO.PTO FIRE PUMPS
PTO FIRE PUMPS
CPK2 PUMP
CPK3 PUMP
An ultra high-pressure, lightweight,
4-stage centrifugal pump. Able to produce
high-pressure fog while the pumper is in
motion or stationary.
The single-stage design
with vertically-split volute and pump
transmission provides simple operation,
easy maintanence and high reserve capacity.
A single-stage end-suction pump for ARFF
trucks and fire boats. Midship mounted
and driven by a PTO drive, the CXK can
also be front-mounted or direct-driven.
One-piece design featuring intake and
discharge arrangements in a wide variety
of options to meet your requirements.
• 75 GPM (285 l/min) at 1250 PSI (86 bar)
• 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar)
• Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar)
• 750 GPM (2850 l/min) to 1250 GPM (4750 l/min)
• 150 PSI (10 bar)
• 500 GPM (1900 l/min) @ 150 PSI (10 bar)
• 350 PSI (24) bar Maximum Pressure
• Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings
(bronze optional)
• Ni-resist; special “stepped” designed wear rings reduce internal leakage
and increase efficiency
• Bronze, hydraulically and mechanically balanced impellers
• Impeller hubs are “stepped” to minimize internal bypass
• Adjustable braided flexible graphite (BFG) packing
• Available with either clockwise or counter-clockwise rotation of input shaft
• High-tensile, close-grained gray iron (bronze optional) transmission casing
• Constant mesh, helical gears made of alloy steel
• 17-4 stainless steel, heat-treated impeller shaft
• Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs
• Victaulic®, threaded or flanged intake connections
• Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.
• 5-year warranty
• High-tensile, close-grained iron (bronze optional), two-piece,
vertically-split volute body
• Constant mesh, helical gears made of alloy steel
• 17-4 stainless steel, heat-treated impeller shaft
• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller
• Bronze replaceable wear rings
• Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.
• 5-year warranty
• High-tensile, one-piece, gray iron casing
• Multiple transmission mounting options (front-housing, bell-housing-direct or PTO)
• Choice of 4-inch NH or BSP threaded-end intake
• Bronze, double-hubbed, precision-balanced impeller
• 17-4 stainless steel, heat-treated impeller shaft
• Maintenance-free, self-adjusting shaft seal
• Hardened, helical cut, constant-mesh gears
• 5-year warranty
FLOW SPECS:
FLOW SPECS:
FLOW SPECS:
FLOW SPECS:
CH-4 FLOW SPECS:
• 1400 GPM (5300 L/min.) @ 250 PSI (17 bar)
CZ FLOW SPECS:
• 950 GPM (3600 L/min.) @ 260 PSI (18 bar)
CZU FLOW SPECS:
• 1500 GPM (5700 L/min.) @ 250 PSI (17 bar)
CR FLOW SPECS:
• 2050 GPM (7800 L/min.) @ 250 PSI (17 bar)
• Bronze (cast iron optional),
horizontally-split volute body
• 17-4 stainless steel impeller shaft
• Oil- or grease-lubricated ball bearings
• Fully-enclosed, bronze, double-hubbed
precision-balanced impeller
• Bronze replaceable wear rings
• 5-year warranty
• Gray iron (bronze optional),
vertically-split volute body
• 17-4 stainless steel impeller shaft
• Oil-splash lubricated ball bearings
• Fully-enclosed, bronze, double-hubbed
precision-balanced impeller
• Bronze replaceable wear rings
• 5-year warranty
• High-tensile gray iron (bronze optional),
vertically-split casing
• 17-4 stainless steel impeller shaft
• Oil-splash lubricated ball bearings
• Fully-enclosed, bronze, double-hubbed
precision-balanced impeller
• Bronze replaceable wear rings
• 5-year warranty
HL200 FLOW SPECS:
• Low Pressure Spec: 2000 l/min @10 bar (3-meter lift)
• High Pressure Spec: 400 l/min @ 40 bar
• Available in mid-mount configuration
• Optional round-the-pump foam system
• Optional operator’s panel
• Optional Storz fittings
• Bronze (gunmetal) construction available
• 5-year warranty
HL300 FLOW SPECS:
• Low Pressure Spec: 3000 l/min @10 bar (3-meter lift)
• High Pressure Spec: 400 l/min @ 40 bar
• Available in mid-mount configuration
• Optional round-the-pump foam system
• Optional operator’s panel
• Optional Storz fittings
• Bronze (gunmetal) construction available
• 5-year warranty
Whether fighting fires on the open sea or battling
blazes on the runway, you demand pumps that
exceed performance standards. To meet these
demands, our fireboat and aircraft rescue and
firefighting (ARFF) pumps are built with the highest
quality materials using the latest technology—
so you never have to worry about performance
or reliability. Tough and rugged, Waterous ARFF
pumps deliver the type of knockdown power you
need, when you need it most.
Specifically designed for international-style fire
vehicles, the compact, rear-mounted HL series
pumps deliver high and low pressure simultaneously,
and feature built-in high-pressure relief valves for
enhanced safety. Both the HL200 and HL300 models
are backed by an industry-exclusive 5-year warranty.
FIREFIGHTING SYSTEMSYOU CAN COUNT ON. EFFECTIVE FIRE SUPPRESSION
IN ANY LANGUAGE.
ARFF FIRE PUMPS
HL SERIES FIRE PUMPS
CH-4 PUMP
CZ PUMP
CR PUMP
HL200 PUMP
HL300 PUMP
• VPO oil-free primer
• Fast, dependable priming
• Electrically driven
• Operates independently from the pump
• Lubrication option (requires priming tank)
• Chromium-plated bronze valve ball
• Spring-loaded floating seal assembly
• Multi-purpose drainport
• Manual, push/pull, twist lock (2.5”) mechanism
with panel-mounted “T” handle lock
• Optional electric actuator complies
with NFPA requirements for slow actuation
• Opens when water inside the pump reaches 140º F (60º C)
• Flashing warning light on pump panel is
triggered when water reaches 180º F (82º C)
• Water is released to ground
• Vacuum Activated Priming (VAP) Valve
• Stainless steel valve stem
• Opens automatically during pump priming
• Closes automatically when primer is deactivated
DISCHARGE VALVES
OVERHEAT PROTECTION MANAGER
PRIMING PUMPS
PRIMING VALVES
WATEROUS FIRE PUMP ACCESSORIES
• Manual, electric or pneumatic operation
• Stainless steel Wafer-Sphere® element
• Polymeric flexible lip seal
• Provision for pre-butterfly relief valve
• Controls discharge pressure by bypassing flow from
discharge back to suction
• Control discharge pressure up to 300 psi (20 bar)
• Available in three sizes, up to 2250 GPM (8500 l/min)
• Pilot-operated for improved performance
• Pressure scale markings
• Panel-mounted strainer
• Spring-loaded locking control
• Dual-action cylinder
DISCHARGE RELIEF VALVE
MONARCH™ INTAKE VALVE
INTAKE RELIEF VALVE
PNEUMATIC SHIFT
Waterous vehicle-mounted fire pumps give
you the power you need. Now equip them to fit
your specific operation by selecting the perfect
accompanying accessories.
• Complete aspirated foam system
• 4-sensor technology
• 2-year warranty and fully-integrated service
• Stainless steel foam manifold
• Full-flow brass body check valve
• 16-bit mixed signal microcontroller
• Onsite and online laptop diagnostics
• Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min) @ 150 PSI (10 bar) foam output
• Maximum operating pressure: 450 PSI (32 bar)
• Complete aspirated foam system
• 1-year warranty and service
• Stainless steel paddlewheel flow meter
• 16-bit mixed signal microcontroller
• Blue LED illuminated operator panel (standard on 2.5 models)
• Onsite and online laptop diagnostics
• Available 1.5 GPM (5.68 l/min) or 2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output
• Maximum operating pressure: 450 PSI (32 bar)
GETTING THE MOST OUT OFYOUR MIDSHIP FIRE PUMP.
WATEROUS FOAM SYSTEMS
AQUIS™ FOAM PROPORTIONER
ADVANTUS® FOAM SYSTEM
Corporate Headquarters125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456
651-450-5000
www.waterousco.com
F-2606 (10/09)
Waterous has you covered with Total
Integration – a comprehensive program
that ensures fire departments have
everything needed from specification
to implementation. Total Integration
guarantees the right equipment, proper
installation, thorough education and
lifetime support with zero exceptions.
1 - EVALUATEWaterous assesses existing equipment, short and long term needs, fire scenarios and other factors to create an accurate, up
to date evaluation of the situation.
2 - PROPOSEWaterous studies the data and objectives to create a fire suppression equipment specification program that meets the
needs and respects the budget.
3 - IMPLEMENTWaterous takes proactive measures to provide the best possible circumstances for proper equipment installation/retrofitting for optimum performance and
longevity.
4 - ORIENTATEWaterous provides thorough equipment orientation ensuring fire departments get the best performance with the safest operation. Waterous also offers the only
CAFS instructors in the industry.
5 - SUPPORTWaterous backs its equipment with industry leading warranties, including 5-year coverage for pumps, 2-year coverage for Advantus®, 1-year coverage for Aquis™,
lifetime call support on all products, and, in addition, Waterous offers the Total Protection Package (TTP-5) that increases the coverage to include labor expenses to dismantle, remove and reinstall covered products or parts.
Contents in this brochure are subject to change without notice.
ENDURANCE™ I MIDSHIP I PTO I ARFF I HL SERIES I ACCESSORIES