Waterous Vehicle Mounted Pump Brochure

Corporate Headquarters651-450-5000

125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456

www.waterousco.com

F-2606 (1/08)

Waterous_VehicleMounted_Brochure2 1 2/13/08 11:47:55 AM

Responding to a fire is no time to discover that you have an

unreliable piece of equipment. That’s why more firehouses around

the world depend on Waterous fire pumps than any other option.

With thousands in use, Waterous fire pumps are proven to be

rugged, reliable and revolutionary in design.

Every Waterous fire pump comes with an industry exclusive

5-year warranty along with the features, accessories

and power fire departments need to suppress the

most dangerous fires.

Never be caught with anything less than the best.

Specify the most trusted fire pump – Waterous.


Responding to a fire is no time to discover that you have an

unreliable piece of equipment. That’s why more firehouses around

the world depend on Waterous fire pumps than any other option.

With thousands in use, Waterous fire pumps are proven to be

rugged, reliable and revolutionary in design.

Every Waterous fire pump comes with an industry exclusive

5-year warranty along with the features, accessories

and power fire departments need to suppress the

most dangerous fires.

Never be caught with anything less than the best.

Specify the most trusted fire pump – Waterous.


High-strength aluminum housing transmission

is 100- to 200- lbs lighter than comparative

transmissions, allowing you to put more tools on

your apparatus. Additionally, aluminum construction

dissipates heat faster for safer operation and

prolonged performance.

With a chain drive, less energy is lost,

enabling the pump to benefit from every

ounce of power. A chain drive also lasts

longer and creates less noise.

The innovative impeller enhances

performance while using less

horsepower. Additionally, a tungsten

carbide-plated hub creates a harder

surface that lasts 4-to-5 times longer

than typical impellers.

Whether you’re transferring to pressure

or volume, this ball transfer valve will not

stick. The maintenance-free design incorporates

a ball with a spring-loaded floating seal assembly so

it can even accommodate sand without binding.

The intelligent separable shaft design makes it possible

to use spring-loaded mechanical shaft seals that have

no leakage and require no routine maintenance.

Never compromise with fire. Insist on a

Waterous midship fire pump. Waterous never cuts

corners when it comes to design, engineering

and manufacturing. The Waterous commitment

to quality is evident in our industry leading

components. The proof is the performance.


High-strength aluminum housing transmission

is 100- to 200- lbs lighter than comparative

transmissions, allowing you to put more tools on

your apparatus. Additionally, aluminum construction

dissipates heat faster for safer operation and

prolonged performance.

With a chain drive, less energy is lost,

enabling the pump to benefit from every

ounce of power. A chain drive also lasts

longer and creates less noise.

The innovative impeller enhances

performance while using less

horsepower. Additionally, a tungsten

carbide-plated hub creates a harder

surface that lasts 4-to-5 times longer

than typical impellers.

Whether you’re transferring to pressure

or volume, this ball transfer valve will not

stick. The maintenance-free design incorporates

a ball with a spring-loaded floating seal assembly so

it can even accommodate sand without binding.

The intelligent separable shaft design makes it possible

to use spring-loaded mechanical shaft seals that have

no leakage and require no routine maintenance.

Never compromise with fire. Insist on a

Waterous midship fire pump. Waterous never cuts

corners when it comes to design, engineering

and manufacturing. The Waterous commitment

to quality is evident in our industry leading

components. The proof is the performance.


The low profile midship two-stage series /

parallel pump with ball-type transfer valve

allows you to switch from pressure to volume

smoothly and easily.

CM FLOW SPECS:

• 500, 750, 1000 and 1250 GPM @ 150 psi

• 1900, 2850, 3800 and 4750 l/min @ 10.3 bar

CMU FLOW SPECS:

• 1500, 1750, 2000 and 2250 GPM @ 150 psi

• 5700, 6625, 7750 and 8550 l/min @ 10.3 bar

• Flame-plated impellers (standard on CMU, optional on CM)

• Two-piece, horizontally-split, high-tensile strength cast iron pump casing

• Optional bronze pump casing

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing

• Bronze double-hubbed accurately balanced impellers

• Stainless steel separable impeller shaft

• Replaceable bronze impeller rings

• Flinger rings mounted on impeller shaft

• Adjustable BFG packing standard (spring-loaded mechanical seal available) Our single stage CS/CSU pumps are reliable

workhorses that feature simple operation coupled

with easy maintenance.

CS FLOW SPECS:

• 750, 1000 and 1250 GPM @ 150 psi

• 2850, 3800 and 4750 l/min @ 10.3 bar

CSU FLOW SPECS:

• 1500, 1750, 2000 and 2250 GPM @ 150 psi

• 5700, 6625, 7570 and 8550 l/min @ 10.3 bar

• Flame-plated impellers (standard on CSU, optional on CS)




• Bronze double-hubbed accurately balanced impeller




• Adjustable BFG packing standard (spring-loaded mechanical seal available)

Versatile and adaptable, the CX can be mounted midship or in

front of the engine if needed. The CX can even be used as a PTO

pump or direct-engine mounted. It’s an ideal solution for specialty

applications or tight spaces.

CX FLOW SPECS:

• 750 to 1250 GPM @ 150 psi

• 2850 to 4750 l/min @ 10.3 bar

• Pressures to 350 psi (24.1 bar)

• End suction/vertically-split volute

• Self-adjusting mechanical seal

• Mechanically and hydraulically balanced impeller


• Optional flame-plated impeller

Waterous midship pumps provide fire industry

professionals with easy-to-operate systems that

offer the most efficient water delivery system

on the market. Admired for their craftsmanship

and exclusive design features, Waterous widship

pumps have become the primary firefighting tools

of fire departments around the globe.


The low profile midship two-stage series /

parallel pump with ball-type transfer valve

allows you to switch from pressure to volume

smoothly and easily.

CM FLOW SPECS:

• 500, 750, 1000 and 1250 GPM @ 150 psi

• 1900, 2850, 3800 and 4750 l/min @ 10.3 bar

CMU FLOW SPECS:

• 1500, 1750, 2000 and 2250 GPM @ 150 psi

• 5700, 6625, 7750 and 8550 l/min @ 10.3 bar

• Flame-plated impellers (standard on CMU, optional on CM)




• Bronze double-hubbed accurately balanced impellers




• Adjustable BFG packing standard (spring-loaded mechanical seal available) Our single stage CS/CSU pumps are reliable

workhorses that feature simple operation coupled

with easy maintenance.

CS FLOW SPECS:

• 750, 1000 and 1250 GPM @ 150 psi

• 2850, 3800 and 4750 l/min @ 10.3 bar

CSU FLOW SPECS:

• 1500, 1750, 2000 and 2250 GPM @ 150 psi

• 5700, 6625, 7570 and 8550 l/min @ 10.3 bar

• Flame-plated impellers (standard on CSU, optional on CS)








• Adjustable BFG packing standard (spring-loaded mechanical seal available)

Versatile and adaptable, the CX can be mounted midship or in

front of the engine if needed. The CX can even be used as a PTO

pump or direct-engine mounted. It’s an ideal solution for specialty

applications or tight spaces.

CX FLOW SPECS:

• 750 to 1250 GPM @ 150 psi

• 2850 to 4750 l/min @ 10.3 bar

• Pressures to 350 psi (24.1 bar)

• End suction/vertically-split volute




• Optional flame-plated impeller

Waterous midship pumps provide fire industry

professionals with easy-to-operate systems that

offer the most efficient water delivery system

on the market. Admired for their craftsmanship

and exclusive design features, Waterous widship

pumps have become the primary firefighting tools

of fire departments around the globe.


A simple to operate, efficient to run and easy

to depend on single stage pump that’s perfect for

applications that require a little less power.

CGVGPA FLOW SPECS:

• 750 GPM @ 150 psi for NFPA 1901

• 2850 l/min @ 10.3 bar

• 500, 600 and 700 GPM for NFPA 1902

• 1900, 2250 and 2650 l/min



• Stainless steel shaft

• Replaceable bronze wear rings

• Bronze-fitted, high-tensile strength cast iron pump casing




• 5-year warranty

Get the power and performance of a traditional midship fire pump in a compact,

lightweight design. Made of ductile iron, the S100C10 and S100D are nearly 35%

lighter, and yet 25% stronger than identical pumps made with gray iron. Available as

a direct-engine mount or matched with a Waterous C10 aluminum case transmission.

S100C10 FLOW SPECS:

• Up to 2000 GPM @ 150 psi

• Up to 7600 l/min @ 10.3 bar

S100D FLOW SPECS:

• Up to 2000 GPM @ 150 psi

• Up to 7600 l/min @ 10.3 bar

• Cast ductile iron body

• Dual stripping edge volute

• Passive lubrication system




• All deep-groove anti-friction ball bearings, oil-splash lubricated

• 5-inch ANSI flange or optional end flanged discharge manifold

• 5-year warranty

Driven by a transmission side mounted PTO, the CPK2 can also be powered by optional direct-engine mount. Able to accommodate multiple lines for straight stream or fog nozzles.

A compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.

S100C10

S100D

FLOW SPECS:

• 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow

• 60 GPM (227 l/min) @ 400 psi (28 bar) Maximum Pressure

FLOW SPECS:

• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow



• Multiple gearbox mounts (horizontally, vertically, or inverted)

• Ten optional speed-increasing transmission ratios

• Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears

• 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)

• Bronze double-hubbed precision-balanced impeller

• 3-inch NPT or BSP intake; 2-inch NPT or BSP discharge

(BSP threads available straight or tapered)

• 5-year warranty

• High tensile, one-piece, close-grained gray iron casing (bronze optional)

• Bronze double-hubbed, precision-balanced impellers.

• Separable impeller shaft for ease of serviceability.

• Push-pull manual bronze transfer valve (in bronze housing)

• Available in either rotation of input shaft

• 4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter

(or 2.5 inch tapped flange) discharge

• PTO or direct engine bell housing mount


• 5-year warranty

Provide true "pump and roll" capability while

reducing transmission wear on your apparatus by

adding a PTO fire pump to your firefighting arsenal.

Available in multiple sizes and styles, Waterous

has a PTO fire pump to fit your requirements and

apparatus set-up perfectly.


A simple to operate, efficient to run and easy

to depend on single stage pump that’s perfect for

applications that require a little less power.

CGVGPA FLOW SPECS:

• 750 GPM @ 150 psi for NFPA 1901

• 2850 l/min @ 10.3 bar

• 500, 600 and 700 GPM for NFPA 1902

• 1900, 2250 and 2650 l/min



• Stainless steel shaft


• Bronze-fitted, high-tensile strength cast iron pump casing




• 5-year warranty

Get the power and performance of a traditional midship fire pump in a compact,

lightweight design. Made of ductile iron, the S100C10 and S100D are nearly 35%

lighter, and yet 25% stronger than identical pumps made with gray iron. Available as

a direct-engine mount or matched with a Waterous C10 aluminum case transmission.

S100C10 FLOW SPECS:

• Up to 2000 GPM @ 150 psi

• Up to 7600 l/min @ 10.3 bar

S100D FLOW SPECS:

• Up to 2000 GPM @ 150 psi

• Up to 7600 l/min @ 10.3 bar

• Cast ductile iron body

• Dual stripping edge volute

• Passive lubrication system




• All deep-groove anti-friction ball bearings, oil-splash lubricated

• 5-inch ANSI flange or optional end flanged discharge manifold

• 5-year warranty

Driven by a transmission side mounted PTO, the CPK2 can also be powered by optional direct-engine mount. Able to accommodate multiple lines for straight stream or fog nozzles.

A compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.

S100C10

S100D

FLOW SPECS:

• 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow


FLOW SPECS:

• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow



• Multiple gearbox mounts (horizontally, vertically, or inverted)


• Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears

• 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)

• Bronze double-hubbed precision-balanced impeller

• 3-inch NPT or BSP intake; 2-inch NPT or BSP discharge

(BSP threads available straight or tapered)

• 5-year warranty

• High tensile, one-piece, close-grained gray iron casing (bronze optional)

• Bronze double-hubbed, precision-balanced impellers.

• Separable impeller shaft for ease of serviceability.

• Push-pull manual bronze transfer valve (in bronze housing)

• Available in either rotation of input shaft

• 4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter

(or 2.5 inch tapped flange) discharge

• PTO or direct engine bell housing mount


• 5-year warranty

Provide true "pump and roll" capability while

reducing transmission wear on your apparatus by

adding a PTO fire pump to your firefighting arsenal.

Available in multiple sizes and styles, Waterous

has a PTO fire pump to fit your requirements and

apparatus set-up perfectly.


HL200 FLOW SPECS:

• Low Pressure Spec: 2000 l/min @10 bar (3-meter lift)

• High Pressure Spec: 400 l/min @ 40 bar

• Available in mid-mount configuration

• Optional round-the-pump foam system

• Optional operator’s panel

• Optional Storz fittings

• Bronze (gunmetal) construction available

• 5-year warranty

HL300 FLOW SPECS:








• 5-year warranty

Specifically designed for international-style fire

vehicles, the compact, rear-mounted HL series

pumps deliver high and low pressure simultaneously

and feature built-in high-pressure relief valves for

enhanced safety. Both the HL200 and HL300 models

are backed by an industry exclusive 5-year warranty.

An ultra high-pressure, lightweight, 4-stage centrifugal pump. Able to produce high-pressure fog while the pumper is in motion or stationary.

The single stage design with vertically-split volute and pump transmission provides simple operation, easy maintanence and high reserve capacity.

A single-stage end-suction pump for ARFF trucks and fire boats. Midship mounted and driven by a PTO drive, the CXK can also be front-mounted or direct-driven.

One-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.

FLOW SPECS:

• 60 GPM (227 l/m) at 1000 PSI (69 Bar)

FLOW SPECS:

• 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar)

• Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar)

FLOW SPECS:

• 750 GPM (2850 l/min) to 1250 GPM (4750 l/min)

• 150 PSI (10 bar)

FLOW SPECS:

• 500 GPM (1900 l/min) @ 150 PSI (10 bar)

• 350 PSI (24) bar Maximum Pressure

• Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings

(bronze optional)

• Ni-resist; special “stepped” designed wear rings reduce internal leakage & increase efficiency

• Bronze, hydraulically and mechanically balanced impellers

• Impeller hubs are “stepped” to minimize internal bypass

• Adjustable braided flexible graphite (BFG) packing

• Available with either clockwise or counter-clockwise rotation of input shaft

• High-tensile, close-grained gray iron (bronze optional) transmission casing

• Constant mesh, helical gears made of alloy steel

• 17-4 stainless steel, heat-treated impeller shaft

• Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs

• Victaulic®, threaded or flanged intake connections

• Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.

• 5-year warranty

• High-tensile, close-grained iron (bronze optional), two-piece,

vertically-split volute body



• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller

• Bronze replaceable wear rings


• 5-year warranty

• High-tensile, one-piece, gray iron casing

• Multiple transmission mounting options (front-housing, bell housing direct or PTO)

• Choice of 4-inch NH or BSP threaded-end intake

• Bronze, double-hubbed, precision-balanced impeller


• Maintenance-free, self-adjusting shaft seal

• Hardened, helical cut, constant-mesh gears

• 5-year warranty


HL200 FLOW SPECS:








• 5-year warranty

HL300 FLOW SPECS:








• 5-year warranty

Specifically designed for international-style fire

vehicles, the compact, rear-mounted HL series

pumps deliver high and low pressure simultaneously

and feature built-in high-pressure relief valves for

enhanced safety. Both the HL200 and HL300 models

are backed by an industry exclusive 5-year warranty.

An ultra high-pressure, lightweight, 4-stage centrifugal pump. Able to produce high-pressure fog while the pumper is in motion or stationary.

The single stage design with vertically-split volute and pump transmission provides simple operation, easy maintanence and high reserve capacity.

A single-stage end-suction pump for ARFF trucks and fire boats. Midship mounted and driven by a PTO drive, the CXK can also be front-mounted or direct-driven.

One-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.

FLOW SPECS:

• 60 GPM (227 l/m) at 1000 PSI (69 Bar)

FLOW SPECS:

• 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar)

• Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar)

FLOW SPECS:

• 750 GPM (2850 l/min) to 1250 GPM (4750 l/min)

• 150 PSI (10 bar)

FLOW SPECS:

• 500 GPM (1900 l/min) @ 150 PSI (10 bar)

• 350 PSI (24) bar Maximum Pressure

• Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings

(bronze optional)

• Ni-resist; special “stepped” designed wear rings reduce internal leakage & increase efficiency

• Bronze, hydraulically and mechanically balanced impellers

• Impeller hubs are “stepped” to minimize internal bypass

• Adjustable braided flexible graphite (BFG) packing

• Available with either clockwise or counter-clockwise rotation of input shaft

• High-tensile, close-grained gray iron (bronze optional) transmission casing



• Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs

• Victaulic®, threaded or flanged intake connections


• 5-year warranty

• High-tensile, close-grained iron (bronze optional), two-piece,

vertically-split volute body



• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller

• Bronze replaceable wear rings


• 5-year warranty

• High-tensile, one-piece, gray iron casing

• Multiple transmission mounting options (front-housing, bell housing direct or PTO)

• Choice of 4-inch NH or BSP threaded-end intake

• Bronze, double-hubbed, precision-balanced impeller


• Maintenance-free, self-adjusting shaft seal

• Hardened, helical cut, constant-mesh gears

• 5-year warranty


Waterous vehicle-mounted fire pumps give

you the power you need. Now equip them to fit

your specific operation by selecting the perfect

accompanying accessories.

• VPO Oil-Free Primer

• Fast, dependable priming

• Electrically driven

• Operates independently from the pump

• Lubrication option (requires priming tank)

• Chromium-plated bronze valve ball

• Spring-loaded floating seal assembly

• Multi-purpose drainport

• Manual, push-pull, twist lock (2.5”) mechanism

with panel-mounted “T” handle lock

• Optional electric actuator complies

with NFPA requirements for slow actuation

• Opens when water inside the pump reaches 140º F (60º C)

• Flashing warning light on pump panel is

triggered when water reaches 180º F (82º C)

• Water is released to ground

• Vacuum Activated Priming (VAP) Valve

• Stainless steel valve stem

• Opens automatically during pump priming

• Closes automatically when primer is deactivated

• Complete aspirated foam system

• 4-sensor technology

• 2-year warranty and fully-integrated service

• Stainless steel foam manifold

• Full-flow brass body check valve

• 16-bit mixed signal microcontroller

• Onsite and online laptop diagnostics

• Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min)

@ 150 PSI (10 bar) foam output

• Maximum Operating Pressure: 450 PSI (32 bar)


• 1-year warranty and service

• Stainless steel paddlewheel flow meter


• Blue LED illuminated operator panel (standard on

2.5 models)


• Available 1.5 GPM (5.68 l/min) or 2.5 GPM

(9.46 l/min) @ 150 psi (10 bar) foam output



Waterous vehicle-mounted fire pumps give

you the power you need. Now equip them to fit

your specific operation by selecting the perfect

accompanying accessories.

• VPO Oil-Free Primer

• Fast, dependable priming

• Electrically driven

• Operates independently from the pump

• Lubrication option (requires priming tank)

• Chromium-plated bronze valve ball

• Spring-loaded floating seal assembly

• Multi-purpose drainport

• Manual, push-pull, twist lock (2.5”) mechanism

with panel-mounted “T” handle lock

• Optional electric actuator complies

with NFPA requirements for slow actuation

• Opens when water inside the pump reaches 140º F (60º C)

• Flashing warning light on pump panel is

triggered when water reaches 180º F (82º C)

• Water is released to ground

• Vacuum Activated Priming (VAP) Valve

• Stainless steel valve stem

• Opens automatically during pump priming

• Closes automatically when primer is deactivated


• 4-sensor technology

• 2-year warranty and fully-integrated service

• Stainless steel foam manifold

• Full-flow brass body check valve



• Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min)

@ 150 PSI (10 bar) foam output



• 1-year warranty and service

• Stainless steel paddlewheel flow meter


• Blue LED illuminated operator panel (standard on

2.5 models)


• Available 1.5 GPM (5.68 l/min) or 2.5 GPM

(9.46 l/min) @ 150 psi (10 bar) foam output



• Manual, electric or Pneumatic operation

• Stainless steel Wafer-Sphere® element

• Polymeric flexible lip seal

• Provision for pre-butterfly relief valve

• Controls discharge pressure by bypassing flow from

discharge back to suction

• Control discharge pressure up to 300 psi (20 bar)

• Available in three sizes, up to 2250 GPM (8500 l/min)

• Pilot-operated for improved performance

• Pressure scale markings

• Panel-mounted strainer

• Spring-loaded locking control

• Dual-action cylinder

Waterous has you covered with Total Integration – a

comprehensive program that ensures fire departments

have everything needed from specification to

implementation. Total Integration guarantees the right

equipment, proper installation, thorough education

and lifetime support with zero exceptions.

EVALUATEWaterous assesses existing equipment,

short and long terms needs, fire scenarios

and other factors to create an accurate, up

to date evaluation of the situation.

PROPOSEWaterous studies the data and objectives

to create a fire suppression equipment

specification program that meets the needs

and respects the budget.

IMPLEMENT

Waterous takes proactive measures to

provide the best possible circumstances for

proper equipment installation/retrofitting

for optimum performance and longevity.

ORIENTATEWaterous provides thorough equipment

orientation ensuring fire departments

get the best performance with the safest

operation. Waterous also offers the only

CAFS instructors in the industry.

SUPPORTWaterous backs its equipment with

industry leading warranties, including

5-year coverage on all vehicle-pumps, a

2-year coverage of Advantus™ and a 1-year

coverage on Aquis™, along with lifetime

call support on all products.


• Manual, electric or Pneumatic operation

• Stainless steel Wafer-Sphere® element

• Polymeric flexible lip seal

• Provision for pre-butterfly relief valve

• Controls discharge pressure by bypassing flow from

discharge back to suction

• Control discharge pressure up to 300 psi (20 bar)

• Available in three sizes, up to 2250 GPM (8500 l/min)

• Pilot-operated for improved performance

• Pressure scale markings

• Panel-mounted strainer

• Spring-loaded locking control

• Dual-action cylinder

Waterous has you covered with Total Integration – a

comprehensive program that ensures fire departments

have everything needed from specification to

implementation. Total Integration guarantees the right

equipment, proper installation, thorough education

and lifetime support with zero exceptions.

EVALUATEWaterous assesses existing equipment,

short and long terms needs, fire scenarios

and other factors to create an accurate, up

to date evaluation of the situation.

PROPOSEWaterous studies the data and objectives

to create a fire suppression equipment

specification program that meets the needs

and respects the budget.

IMPLEMENT

Waterous takes proactive measures to

provide the best possible circumstances for

proper equipment installation/retrofitting

for optimum performance and longevity.

ORIENTATEWaterous provides thorough equipment

orientation ensuring fire departments

get the best performance with the safest

operation. Waterous also offers the only

CAFS instructors in the industry.

SUPPORTWaterous backs its equipment with

industry leading warranties, including

5-year coverage on all vehicle-pumps, a

2-year coverage of Advantus™ and a 1-year

coverage on Aquis™, along with lifetime

call support on all products.


Corporate Headquarters651-450-5000

125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456

www.waterousco.com

F-2606 (1/08)


Documents

Waterous Vehicle Mounted Pump Brochure