Upload
dinhdiep
View
215
Download
1
Embed Size (px)
Citation preview
Jamesway electric manure pumps are designed for rugged dependability and minimum maintenance. From heavy-duty steel construction to quality components, Jamesway pumps are built for the job. They’re loaded with features that make them convenient to operate and easy to service. With a choice of many models and a wide variety of options, Jamesway manure pumps can be set up exactly to your needs.
When you’re looking for a reliable, high quality machine to handle your manure pumping requirements, look no further than a Jamesway manure pump to deliver the performance you want. All products are supported by an extensive dealer network that services what they sell.
RELIABLE AND EFFECTIVE SYSTEMS
Powerful and reliable performance has made Jamesway pumps the first choice at high-demand operations.
www.JameswayFarmEq.com
5 HPelectricmotor
Oil-filled drive tube& bearing assembly
4’ thru 18’ models
Mounting bracket
included
6” & 8” VERTICAL ELECTRIC PUMPSThese electric manure transfer pumps are designed to agitate and pump milking parlor wastewater and hog manure with fast results. The lower agitation nozzle will quickly agitate a small to medium-sized reception pit and will transfer manure through a 4” PVC pipe up to several hundred feet (depending on elevation).
The 6” diameter impeller can agitate liquid at a rate of up to 480 GPM with a 5 HP electric motor. An oil-filled lower bearing assembly, with greasable seals, insures a long operating life. The 6” manure transfer pump is available in 4’ - 18’ lengths.
6” VERTICAL PUMP
Actual pump performance may vary depending on manure consistency.
7-1/2 or 10 HPelectric motor
Oil-filled drive tube& bearing assembly
4’ thru 18’ models
Agitationnozzlerotates
270 degrees
Mounting bracket
included
8” VERTICAL PUMPThe 8” diameter impeller and belt drive makes this pump a great choice for more demanding wastewater pumping and for hog manure.
Agitationnozzlerotates
270o
degrees
Remotegrease linefor lower
seals
The 12” and 16” electric manure transfer pumps are designed to agitate and pump out manure reception pits with minimum hassle and maximum performance. Available in lengths from 12’ to 16’, and equipped with a 12” or 16” diameter impeller, our manure pumps can be equipped with a wide variety of electric motors (7.5-40 HP) to get the job done fast and easy.
Standard equipment includes twin agitation nozzles that rotate 270 degrees, and a reliable triple sealed oil-bath lower bearing chamber. Choose from a sliding stationary mounting bracket that allows for fast, easy installation and servicing or an economical floor mount bracket.
6’ thru 16’ models
Oil-filledbearing assembly
Optional gearbox
lift
12” or 16”heavy-duty
boltedimpeller
7.5 - 40 HPelectric motors
6” discharge
12” & 16” VERTICAL ELECTRIC PUMPS
The lower bearing assembly features an oil
bath bearing chamber and a 2-1/4” dia. shaft with tapered roller bearings and triple seals for long
operating life.
Choice of Floor Mount or Slide & Tilt Mount. The Slide & Tilt mount may be equipped with a Lifting Hoist for use with a
heavy duty drill, or with a Power Lift with electric motor.
Oil reservoir and remote grease lines
to lower chamber
Actual pump performance may vary depending on manure consistency.
www.JameswayFarmEq.com
20” VERTICAL ELECTRIC PUMPS
The Jamesway 20” electric manure transfer pump is designed to agitate large manure reception pits and transfer up to 1500’ to long-term storage. Available in lengths from 8’ to 16’ these pumps can be equipped with a 50, 75, or 100 HP electric motor to provide maximum pumping efficiency and performance.
All pumps feature a heavy-duty 20” diameter impeller, a tubular type drive shaft that needs no intermediate support bearings, and an oil-bath lower bearing assumably with triple, greaseable seals to maintain reliable pump operation.
The COMMERCIAL DUTY vertical pump
Actual pump performance may vary depending on manure consistency.
6” discharge
50, 75 or 100 HPelectric motor
Oil reservoir withremote grease line to lower
chamber
Wall or fl oor mounting kits
8’ to 16’ models
Oil fi lled bearingassembly
20” heavy-dutybolted impeller
FLUSHING PUMPSJamesway builds a variety of pumps for barn flushing, tanker loading and other special purposes. Your Jamesway Dealer can help you select the right pump for your job.
Designed to quickly chop and mix bedding materials, the Jamesway Electric Prop Agitator uses the same proven frame as the 16” vertical pump.
PROP AGITATOR
Fiberglass belt shield
is hinged for easy access
Floor mount withswivel and
locking pedal
Rigid square body, models up to 16’
20” diameter impellerand hardened
stationary knives
Oversize gearbox
Thick steel safety shroud
Heavy duty 1.5” bearingon easy access mounts
Oil reservoirfor gearbox
Choose from 7.5, 10 or 15HPdrive kit and motor
The propeller edge scissors bedding against the hardened steel knives
to quickly homogenize manure.
Frequently used for cleaning the floors in dairy barn holding areas, this Flush Pump produces high flow volumes using a 40 HP motor.
All wear parts are bolt-on making it easy to keep yourJamesway pump working like new.
6” or 8” discharge
Oil reservoir with remote grease line in
lower chamber
Oil-fi lled bearing assembly
www.JameswayFarmEq.com
ACCESSORIESEvery installation is different, and our wide assortment of valves, fittings and adapters let you select the right components for each job. Jamesway accessories provide a clean and professional finish on every application. And remember that this is not just water...manure pumping requires valves and fittings specifically designed for the job!
The BEST PUMPS deserve the BEST accessories.
PLANNINGWELL-BUILT EQUIPMENT works best in a WELL-PLANNED SYSTEM.Your factory-trained Jamesway Dealer has the expertise to design your system. Jamesway Engineersand Territory Managers are always ready to help.
PVC ADAPTER SPACER HEAVY WELD TEE
THRU-WALLFLANGE
HEAVY WELDELBOW
TOP-TO-BOTTOMKIT FOR
RECEPTION PITS
RECEPTIONPIT VALVE
UNDERGROUNDVALVE
MANIFOLDSYSTEM
www.JameswayFarmEq.com
DEALER:
MANURE SYSTEMS:• Alley Scrapers• Vertical Electric Pumps• Electric Prop Agitator• Vertical PTO Pumps• Piston Transfer Pumps• Cross Gutter Systems• Barn Cleaners
MANURE APPLICATION:• Non-steer spreader tanks• Steerable spreader tanks• Injection Systems• Truck Mount Tankers• Lagoon Pumps• Prop Agitators• Loading pumps
FEEDING SYSTEMS:• Silo Unloaders• Feeders• Conveyors• Hammer Mill• Power Feed Carts• Bedding Chopper
Visit our website for more information on these Jamesway products!Jamesway Farm Equipment products are designed in conformance to ASAE Standards S354.4 “Safety for Farmstead Equipment” and S318.15 “Safety for Agricultural Equipment”. Some photos in this brochure have safety shields removed or open to show additional detail on equipment features. Never operate equipment without safety shields in place. Jamesway continually updates and improves products and reserves the right to make changes in the design, specifi cations, and to add improvements to our products, without incurring an obligation on equipment purchased.
JAMESWAY FARM EQUIPMENT, INC. 12 Route 249St. Francois-Xavier (Quebec) JOB 2V0Tele: (819) 845-7824 Fax: (819) 845-5153
JAMESWAY FARM EQUIPMENT, INC. USA Warehouse15383 State Hwy. 131 Tomah, WI 54660
MODEL 6 INCH 8 INCH 12 INCH 16 INCH 20 INCHCapacity (Agitation) 480 gpm 700 gpm 1100 gpm 1500 gpm 3000 gpmMotor kits 5 HP 7.5 or 10 HP 7.5, 10, 15 20, 25 HP
Twin 7.5 or twin 10Twin 10, 20, 25, 30
or 40 HP50, 75 or 100 HP
Impeller diameter 6” 8” 12” 16” 20”Discharge pipe 3” 4” square 4” 4” 6”Discharge coupler 3” steel or 4” PVC 4” steel or 4” PVC 6” Quick couplerAgitation nozzle diameter
2” 2” 3” Upper4” Lower
3” Upper4” Lower
3.5”
Lower drive bearing Oil fi lledBottom seal Greaseable with remote greaselineMount kits Floor or wall Tilt & Slide Kit or Floor mount Floor or wallPit depths 4’, 6’, 8’, 10’, 12’, 14’, 16’ or 18’ 6’, 8’, 10’, 12’, 14’ or 16’
MODEL 6 INCH 8 INCH 12 INCH 16 INCH 20 INCHWastewater
Hog Manure
Dairy Manure
Pump is not recommended for this application
Pump may be used with smaller particle size/low solids content
Pump may be used with smaller particle size
Recommended
SPECIFICATIONS
RECOMMENDED APPLICATIONS