This range includes four electrically driv enmodels with the following standard equipment:work table, limit switches and measuring scales.Optionally, electric limit switches may be fitted(except on BENDICROP, which form part ofthe standard equipment) for cutting flat barand section iron. The shearing system consistsof one single cut, without wasting any material.The MINICROP and MULTICROP have beenfitted with a patented floating blade for cuttingsection iron without an y deformation of thematerial.

6

Universal Shearing and Punching Machineswith one cylinder

1. Monoblock frame.

2. Monoblock blade holder with anti-

friction bushings.

3. Electrical box with safety and

integrated controls.

4. Electrically driven hydraulic unit

with submerged pump.

5. Double acting cylinder.

8

MicrocropAngle cutting station

Flat bar cutting station

Adjustable blade Gap on Fblades.Safety protection. Material clamping guide.

Limit switches for travel setting.

B 1-3/16” cut and A up to 1”in position of flat bar (withslight deformation).

Cutting of flat bar up to8” x •”. Shearing of an F legat 45º.

Adjustable pla y betweenflatbar blades.

F cutting up to3” x 3”x 5/16” without anywaste of neither materialnor burrs.Material clamping guide.

Manual selector switch /automatic shear inggauge.

Non-returning selectorswitch for approaching.

Easily removable doorsto access hydraulic unit.

9

Punching station

Monoblock body andsandwich structure.

Blade-holder Adjustment.

Adjustable Stripper.

Punching B 1-1/16” x 3/8”.Quick change punch. Off-setpunches available for smallangles. Safety protection.

Accurate positioning tablewith removable front for F

punching, leg down.

OPTIONAL EQUIPMENT

1. Punching equipment up to B 1-13/32” x 5/16” inthickness.

2. Blades for B cutting with minimum deformation.

3. Rectangular notching.

4. ”Touch & Cut” length stop.