Transair®, advanced air pipe systems Product catalogASME B31.1, ASME B31.3, European standard 97/23 CEE - § 3.3 (equipment under pressure), and is registered with the Canadian TSSA

Transair®, advanced air pipe systemsProduct catalog

transair revised catalog aug 04.qxp 9/24/2004 4:23 PM Page 1

2

Transair®, advanced air pipe systems

Transair® technologyThe innovative technology of Transair enables rapid and easy assembly:quick connection of components to the aluminum pipe.

Technical specifications Suitable fluids:

• Compressed air(dry, wet, lubricated)

• Vacuum • Inert gas:

argon, nitrogen (other fluids,please consult us)

Max working pressure: 232 psi

Vacuum level:• 98.7% (29.6" Hg)

Normal working temperature:• From -4°F to +140°F

Excellent resistance to:• Compressor oils

(mineral or synthetic)• Ultra-violet rays

Storage temperature:• From -40°F to +176°F

CertificationOur manufacturing process includes individual con-trol and unit dating for all Transair® fittingsand pipe, in order to guarantee their quality and traceability.

Regarding security, Transair® conforms toASME B31.1, ASME B31.3, European standard97/23 CEE - § 3.3 (equipment under pressure), andis registered with the Canadian TSSA.

Identification

Transair® is an innovative compressed air pipe system for the distribution of air that is very easyto assemble, change and expand. With a wide product range and many accessories, Transair®

helps you with your air system projects by offering a modern and energy efficient solution.

Double clamp ring

Engage the nut and double clampring onto the pipe; then tighten

1/2 turn with a spanner

and the connectionis secured

• Quick connection with double clamp ring63 mm

Gripping ring Insert the pipe into the component The connection is secured

• Quick connection with gripping ring16.5 mm - 25 mm - 40 mm

Part numbers have been chosen by a method ofmnemonics. Each Transair® component is identified by:

• Its series• Pipe OD• Thread code or second pipe OD

Series

Ø Pipe OD

Thread code or pipe OD6662 40 22

Transair®

meets the requirements of

ASME B31.1

Transair®

meets the requirements of

ASME B31.3

Transair® components are non-flammable, with no propagation of flame. Materials are 100 % recyclable. Transair pipe, fittings and valves are guaranteed silicone free.


Tr a n s a i r®

3

4-5

6-7

8

9

10-11

12

13

14-15

16-17

18-20

21

22

23-25

26

Contents

Legris has a policy of continual product development and, therefore, reserves the right to modify any productsshown in this catalog, without notification. All dimensions are indicative.

Aluminum pipe & Flexible hose

Pipe-to-pipe and Threaded connectors

Quick assembly brackets

Wall brackets

Pipe to Pipe Connectors for 3” & 4” pipe

Ball valves

Pressurized system outlets & Spare parts

Tools

Fixture accessories

Composite automatic safety couplers

Hose reels & Blowguns

FRLs, Automatic drain & Accessories

Miscellaneous Legris fittings

Installation guide

Warranty

Transair® worldwide

Index

Piping schematic

28

27

30-31

29


Rigid aluminum calibrated pipe • Optimum flow rate performance• Suitable fluids: compressed air, vacuum, nitrogen, argon

(other fluids, please consult us)• Max working pressure: 232 psi

Rigid aluminum pipe

10 ft rigid aluminum pipe

Øext. Øint. Transair® L (ft)

16.5 13 1013A17 04 00 9' 9 7/32" 1.41

25 22 1013A25 04 00 9' 7 7/8" 2.12

40 37 1013A40 04 00 9' 7 15/32" 3.11

63 59 1013A63 04 00 9' 10 1/6" 6.92

lbs

1013A

20 ft rigid aluminum pipe

Øext. Øint. Transair® L

25 22 1016A25 04 00 19'9 3/4" 4.24

40 37 1016A40 04 00 19' 8 1/4" 6.22

63 59 1016A63 04 00 19' 7 1/8" 13.84

lbs

1016A

4

MaterialsRigid aluminum pipe:

• Paint Qualicoat certified• Calibrated aluminum pipe• Aluminum Alloy 6063 T5• Extruded pipe (conforms to EN 755.2. EN 755.8 and EN 573.3 standards) ASTM B241

20 ft

10 ft

L

L

3 and 4 inch rigid pipe

Øext. Øint. Transair® L (ft)

TA16

pipe sizes: 16.5 mm O.D. = 1/2" ID

25 mm O.D. = 7/8" ID

40 mm O.D. = 1 1/2" ID

63 mm O.D. = 2 1/2" ID

76.2 mm O.D. = 3" OD

101.6 mm O.D. = 4" OD

76.1 73 TA16 L1 04 19' 7 1/8" 39.05

101.6 97.6 TA16 L3 04 19' 7 1/8" 65.26

lbs

20 ft

L

• Clean air • Light weight• Vacuum: 98.7% (29.6" Hg)• Normal working temperature: -4°F to +140°F


Tr a n s a i r®

Flexible hose• Compressor outlets (absorption of vibration)• To bypass obstacles and join different levels• Expansion loops• Max working pressure: 232 psi• Vacuum: 98.7% (29.6" Hg)

Flexible hose for compressed air pipe systems

Min For use withODmm IDmm Transair® L bend Transair®

radius (in) pipe diameterlbs

1001E

38 25 1001E25 00 01 1’4” 4" 25 1.20

38 25 1001E25 00 03 5' 4" 25 3.28

38 25 1001E25 00 04 6'7" 4" 25 4.40

54 40 1001E40 00 02 3'3" 16" 40 4.57

54 40 1001E40 00 04 6'7" 16" 40 7.32

54 40 1001E40 00 05 9'10" 16" 40 8.82

79.5 63 1001E63 00 08 4'7" 12" 63 8.64

79 63 1001E63 00 05 9'10" 10" 63 17.77

79 63 1001E63 00 06 13'1" 10" 63 23.59

Flexible hose for vacuum systems

Restraining cable assembly (1)

Min For use withØext. Øint. Transair® L bend Transair®

radius (in) pipe diameterlbs

1001E

36 25 1001E25V00 01 1’4” 3" 25 1.98

36 25 1001E25V00 03 5' 3" 25 5.51

36 25 1001E25V00 04 6'7" 3" 25 6.61

52 40 1001E40V00 07 3'3" 6 1/2" 40 3.08

52 40 1001E40V00 04 6'7" 6 1/2" 40 8.81

52 40 1001E40V00 05 9'10" 6 1/2" 40 9.92

76 63 1001E63V00 05 9'10" 10" 63 19.27

76 63 1001E63V00 06 13'1" 10" 63 24.00

(1) Prevents whip-lash should Transair® flexible hose become disconnected while under pressure.Conforms to the ISO 4414 safety standard.

6698

Restraining cable assembly (1)

6698

6698 99 03

6698 99 03

Flexible hoses

Materials

Flexible hose:• hose and coating: black SBR / NBR • reinforcement: spiral steel wire • end fitting: stainless steel 304 – material n°1.4301

Flexible hose for 3” and 4”FP01

Øext. Øint. Transair® L (ft.)

91.5 76 FP01 L1 01 4’11” 11.35

91.5 76 FP01 L1 02 6’6” 15.21

117.5 101 FP01 L3 02 6’6” 28.22

117.5 101 FP01 L3 03 9’10” 40.48

Self-adhesive stickers for compressed air net-EW07

Transair®

EW07 00 01

Self-adhesive stickers for vacuum net-0000

Transair®

0000 01 68

• Flexible hose for compressed air systems:- Hose and coating: black SBR- Reinforcement: synthetic braiding

• Flexible hose for vacuum systems:- Hose and coating: black SBR/NBR- Reinforcement: spiral steel wire

lbs

5

• Working temperature: -4°F to +140°F• Resistant to mineral and synthetic compressor oils• Fire resistant (conforms to ISO 8030 standard for compressed

air flexible hose and EN 12115 for vacuum flexible hose)


Pipe-to-pipe and threaded connectors

Male threaded connector, NPT thread

ØD C Transair® E G H

16.5 1/4 6605 17 14 9.5 34.0 62.5 3.67

16.5 1/2 6605 17 22 15.0 34.0 68.0 4.09

25 1/2 6605 25 22 15.0 44.5 70.5 9.52

25 3/4 6605 25 28 15.0 44.5 71.5 11.64

25 1” 6605 25 35 16.0 44.5 71.5 7.05

40 1” 6605 40 35 16.0 67.0 111.5 8.11

40 1”1/4 6605 40 43 21.5 67.0 111.5 15.49

40 1”1/2 6605 40 50 24.5 67.0 114.5 21.69

40 2” 6605 40 44

63 2” 6605 63 44 20.0 91.0 118.5 36.33

63 2”1/2 6605 63 41 25.0 91.0 130.5 47.62

63 3” 6605 63 46

oz

6605 Equal elbow

ØG

L

Z

ØD

Z

ØD Transair® G L Z16.5 6602 17 00 34.0 58.0 31.0 2.43

25 6602 25 00 44.5 68.0 40.0 3.77

40 6602 40 00 67.0 107.0 45.0 11.32

63 6602 63 00 91.0 122.0 61.0 33.86

oz

6602

45° elbow

ØG

L

Z

ØD

Z

ØD Transair® G L Z25 6612 25 00 44.5 57.0 29.0 4.06

40 6612 40 00 67.0 90.0 45.0 13.40

oz

6612

Equal pipe-to-pipe connector

ØG

L

ØD

Z Z

ØD Transair® G L Z16.5 6606 17 00 34.0 120.5 33.5 2.50

25 6606 25 00 44.5 151.5 48.0 4.55

40 6606 40 00 67.0 205.0 57.0 12.13

63 6606 63 00 91.0 171.5 25.0 28.92

oz

6606

6

Materials6605 16.5 - 25 - 40 63

• Body Treated-brass Treated brass• Nuts Polyamide with Fiberglass Treated aluminum

6606/6676/6602/6612/6604 16.5 - 25 - 40 63• Body Polyamide with Fiberglass Treated aluminum • Nuts Polyamide with Fiberglass Treated aluminum

Equal pipe-to-pipe connector with vent

ØG

L

ØD

Z Z

ØD Transair® G L Z25 6676 25 00 44.5 151.5 48.0 4.55

40 6676 40 00 67.0 205.0 57.0 11.32

63 6676 63 00 91.0 171.5 49.0 29.63

oz

6676

Equal tee

ØG

LZ1

ØDHZ2

Z1

ØD Transair® G H L Z1 Z216.5 6604 17 00 34.0 58.0 120.5 33.5 31.0 5.29

25 6604 25 00 44.5 67.5 151.5 48.0 40.0 6.38

40 6604 40 00 67.0 102.5 205.0 57.0 57.0 21.48

63 6604 63 00 91.0 122.0 245.0 61.0 61.0 47.62

oz

6604

Supplied with LF3000 and 5/16"(8mm) plug.

• Quick connection• Full bore design• Interchangeable and reusable• Non-flammable materials(UL94-HB standard) The range of Transair® pipe-to-pipe and stud connectors provides

versatility of design and helps to overcome constraints often encounteredwith the structure of industrial buildings

• Max working pressure: 232 psi • Vacuum level: 98.7% (29.6" Hg)• Working temperature: -4°F to +140°F


Tr a n s a i r®

Equal cross

L2

L1

Z1

Z2

ØG

ØD Transair® G L1 L2 Z1 Z225 6607 25 00 44.5 152.0 135.0 48.0 40.0 8.47

oz

6607

Unequal tee

ØG

L

Z1

ØD2

ØD1Z2

H

ØD1 ØD2 Transair® G H L Z1 Z263 40 6604 63 40 91.0 161.0 245.0 61.0 116.0 3.31

lbs

6604

7

Materials6604/6607/6625 16.5 - 25 - 40 63

• Bodies Polyamide with Fiberglass Treated aluminum• Nuts Polyamide with Fiberglass Treated aluminum

6621: Treated aluminum

6666/6651 16.5 - 25 - 40 63 • Bodies Treated brass Treated aluminum• Nuts Polyamide with Fiberglass Treated aluminum

Male adapter, NPT thread

ØD

C

L

H

Ø 6

3

Ø 40

61

116

2580

Ø 63

Ø 40

ØD C Transair® L H16.5 1/2 6621 17 22 42.2 5.0 0.70

25 1/2 6621 25 22 49.0 7.0 1.23

25 3/4 6621 25 28 49.0 7.0 2.01

40 1"1/4 6621 40 43 73.7 8.0 4.90

40 1"1/2 6621 40 50 75.7 10.0 6.07

oz

6621Vented end-cap

ØG

E

ØD

L

H

ØD Transair® E G H L16.5 6625 17 00 25.5 34.0 45.5 62.5 3.39

25 6625 25 00 33.0 44.5 47.0 75.0 3.39

40 6625 40 00 34.5 67.0 55.0 98.5 6.45

63 6625 63 00 31.0 91.0 74.0 105.0 16.23

oz

6625

Plug-in reducer

ØG ØD2ØD1

Z

L

ØD1 ØD2 Transair® G Z L225 16.5 6666 17 25 34.0 50.0 77.0 2.54

40 25 6666 25 40 44.5 71.5 99.0 4.09

oz

6666

Plug-in reducer

L

ØGØD2

ØD1 ØD2 Transair® G L63 40 6666 40 63 67.0 112.5 30.34

oz

6666

The 63 mm to 40 mm reducer is secured by a 63 mm screw-on nut.

16.5mm supplied with LF3000 6 mm plug25-40-63mm supplied with LF3000 5/16"(8 mm) plug.

Manifold

ØD Transair®

25 6651 25 12 04 2.34

40 6651 40 12 04 6.17

lbs

6651


Tr a n s a i r®

• Quick assembly without cutting the pipe

• Horizontal or vertical connection

• Integral condensate retention device

• Non-flammable (conforms to UL94-HB standard)

Reduced overall dimension.Protection of downstream network.

• Max working pressure: 232 psi • Vacuum: 98.7% (29.6"Hg)

• Working temperature: -4°F to +140°F

Quick assembly brackets

Quick assembly bracket

ØG

ØD

E

H

L N

ØD

Z

ØD Transair® E G H L N Z25 6662 25 00 31.0 44.5 79.5 36.0 47.5 52.0 4.13

40 6662 40 00 37.0 67.0 119.5 72.0 74.5 74.0 14.18

oz

6662

Mini-bracket with coupler

ØD C Transair® Profile Bore (in)25 1/2 6667 25 U1 ISO B 1/4"

25 1/2 6667 25 U2 ISO B 3/8"

25 1/2 6667 25 A1 ARO 1/4"

40 1/2 6667 40 U1 ISO B 1/4"

40 1/2 6667 40 U2 ISO B 3/8"

40 1/2 6667 40 A1 ARO 1/4"

63 1/2 6667 63 U1 ISO B 1/4"

63 1/2 6667 63 U2 ISO B 3/8"

63 1/2 6667 63 A1 ARO 1/4"

6667

Quick assembly reducing bracket

ØD1

E

HZ

L N

ØG

ØD2

ØD1 ØD2 Transair® E G H L N Z25 16.5 6662 25 17 30.8 34.0 84.0 36.0 47.5 57.0 3.49

40 16.5 6662 40 17 39.0 34.0 99.8 37.2 67.5 73.0 4.87

40 25 6662 40 25 39.0 44.5 95.0 37.2 67.5 68.0 5.43

63 25 6662 63 25 63.5 44.5 103.0 50.0 108.5 75.0 10.58

oz

6662

Quick assembly mini-bracket with female thread

Ø D

L N

C

E

HM

ØD C Transair® E H L N M25 1/2 6663 25 22 30.8 51.3 36.0 46.5 90.1 4.09

40 1/2 6663 40 22 39.2 66.0 37.2 58.2 113.4 5.50

63 1/2 6663 63 22 16.58

63 3/4 6663 63 28 18.00

oz

6663

8

Materials6662/6663*/6667 16.5 - 25 - 40 63

• Body Polyamide with Fiberglass* Polyamide with Fiberglass• Nut Polyamide with Fiberglass Polyamide with Fiberglass

Coupler: composite material(see details p. 18-20)

*Brass insert

Quick assembly bracket

ØD1 ØD2 Transair® E G H L N Z

25 16.5 RA69 25 17 3.49

40 25 RA69 40 25 4.87

25 1/2” RA68 25N04 1/2” NPT Female Thread 5.43

40 1/2” RA68 40N04 1/2” NPT Female Thread 10.58

oz

RA69Simple bracket RA68


Tr a n s a i r®

• Working pressure: 232 psi • Vacuum level: 98.7% (29.6"Hg)• Working temperature: -4°F to +140°F

Wall brackets

9

Materials6673/6674/6683/6684/6687/6688 16.5 - 25

• Body Treated brass• Nut Polyamide with Fiberglass

1 port wall bracket, NPT 1/2"6683

H

K N

ØG

ØD

C

66.5

19.5

ØD C Transair® G H K N16.5 1/2 6683 17 22 34 65 70.5 82 17.11

25 1/2 6683 25 22 44.5 81 70.5 82 16.29

oz

2 port wall bracket, NPT 1/2"6684

H

K N

ØG

ØD

C

66.5

19.5

ØD C Transair® G H K N16.5 1/2 6684 17 22 34 65 74.5 82 16.01

25 1/2 6684 25 22 44.5 81 74.5 82 13.97

oz

1 port wall bracket,with coupler

6673

ØD Transair® Profile Bore (in)16.5 6673 17 U1 ISO B 1/4"

16.5 6673 17 U2 ISO B 3/8"

16.5 6673 17 A1 ARO 1/4"

25 6673 25 U1 ISO B 1/4"

25 6673 25 U2 ISO B 3/8"

25 6673 25 A1 ARO 1/4"

2 port wall bracket,with coupler

6674

ØD Transair® Profile Bore (in)16.5 6674 17 U1 ISO B 1/4"

16.5 6674 17 U2 ISO B 3/8"

16.5 6674 17 A1 ARO 1/4"

25 6674 25 U1 ISO B 1/4"

25 6674 25 U2 ISO B 3/8"

25 6674 25 A1 ARO 1/4"

1 port threaded wall bracket, NPT 1/2"6687

N C1

C2

H

66,5 K

C1 C2 Transair® H K N1/2 1/2 6687 22 22 48 72.5 82 16.75

1/2 1/2 6688 22 22 48 66.5 82 14.81

oz

2 port threaded wall bracket, NPT 1/2"6688

Coupler: composite material (see details p.18-20)

• 1 port or 2 ports• Mounting on walls or machinery• Non-flammable (conforms to UL94-HB standard)

Multi-port filter - 4 ports

261m

m (1

0.3”

) 80mm (3.2”)

INLET 1” B

2 x 1/2” BSP2 x 3/8” BSP

OUTLET

ET01

Inlet Transair®

1/2” NPT ET01 00N04US Multimport Filer - four ports - (2) 1/2”&(2) 3/8”

ET98 01 01Us Replacement filter element

ET98 01 01Us Replacement filter element

ET98 03 0US Wall mounting bracketRO


10

• Optimum sealing• Reliable connection• Full passage• Non-flammable, no propagation

of flame (UL94-HB)

• Maximum working pressure: 232 psi: • Vacuum level: 29.6" Hg • Working temperature: -4°F to +140°F

Pipe-to-pipe connectors

Pipe-to-pipe connector (clamp and cartridge)RR01

RR01: treated steel clamp / engineering grade polymer cartridge / NBR seal.RX02 / RX04 / RX23 / RX24: stainless steel 304 – material n°1.4301, in accordance with ASTM A774.

ØD Transair® L E1 E2 M N3" RR01 L1 00 146 104 132 98.7 51.4 2.33

4" RR01 L3 00 146 128 157 123 52.7 3.06

90° elbowRX02

ØD Transair® H3" RX02 L1 00 227 2.21

4" RX02 L3 00 278 3.86

Equal teeRX04

ØD Transair® L E1 E23" RX04 L1 00 290 145 145 2.32

4" RX04 L3 00 310 155 135 3.97

Reducing teeRX04

ØD1 ØD2 Transair® L E1 E24" 3" RX04 L3 L1 310 155 135 3.62

Threaded teeRX20

ØD C Transair® L E1 E23" 1/2 RX20 L1N04 290 145 63 1.92

4" 1/2 RX20 L3N04 310 155 75.8 3.40

Reducing teeRX24

ØD1 ØD2 Transair® L E1 E2

3" 1 1/2" RX24 L1 40 290 145 104 2.01

3" 2 1/2" RX24 L1 63 290 145 163 2.29

4" 1 1/2" RX24 L3 40 310 155 116.5 3.46

4" 2 1/2" RX24 L3 63 310 155 175.8 3.75

Delivered with 4 x M8 captive bolts in treated steel.

90°

lbs

lbs

lbs

lbs

lbs

lbs

Reducing TeeRX24 L1 40RX24 L3 40

6625 40 00End cap only


Tr a n s a i r®

11

REMINDER

To make a 90° change of direction

To create a drop

To add an end cap

To connect a flange

To reduce down from Ø 4" to Ø 3"

2 x RR011 x RX02

3 x RR011 x RX04

1 x RR011 x RX25

1 x EW05

1 x EW06 1 x RX30 1 x RR01

1 x RX66 L3 L1 1 x RR01 L1 001 x RR01 L3 00

Materials

End capRX25

ØD Transair® L3" RX25 L1 00 99.6 .71

4" RX25 L3 00 107.4 1.17

In-line reducerRX64

ØD1 ØD2 Transair® L ØE3" 2 1/2" RX64 L1 63 230 22 1.26

4" 2 1/2" RX64 L3 63 250 22 1.76

In-line reducerRX66

ØD1 ØD2 Transair® L4" 3" RX66 L3 L1 192.5 1.57

RX25 / RX64 / RX66: stainless steel 304 – material n°1.4301, in accordance with ASTM A774.

lbs

lbs

lbs


• Quick connection• Available in lockable version• Manual or piloted operation• Non-flammable

(conforms to UL94-HB standard) Transair® ball valves placed regularly throughout the network and at key locations, such as compressor outlets and upstream of pneumatic tools, allow ease of system isolation, adaptation and maintenance.

• Working pressure: 232 psi • Vacuum level: 98.7% (29.6"Hg)• Working temperature: -4°F to +140°F

Ball valves

Ball valve

ØG

L

N

ØD

oz

4002 Remote controlshut-off valve

ØG

L

ØD

Ø4 Ø4

ØD Transair® E G40 4230 00 40 67 261 4

lbs

4230

Pilot kit

H K

L

K1

4299Double female, vented

ØG

L

Z2Z1

ØD

N

ØD Transair® G L N Z1 Z216.5 4089 17 00 34.0 120.0 69.5 27.0 40.0 11.99

25 4088 25 14 44.5 152.0 108.5 41.0 59.0 38.44

oz

4088

Lockable valve, vented4099

12

Materials4089/4099/4230 16.5 - 25 - 40• Body Treated brass• Nut Polyamide with Fiberglass

4002 40 63• Body Polyamide with Fiberglass Polyamide with Fiberglass• Nut Polyamide with Fiberglass Treated aluminum

Min working pressure: 58 psi • Max working pressure: 235 psi The Transair® remote control shut-off valve is supplied with a plugged vent hole. This allows venting of the downstream network, after closing the valve.

Model 4089 17 00: supplied with Ø6 mm plug Model 4088 25 14: supplied with Ø8 mm plug

Transair® H K K1 L4299 03 01 145 106 70 82 20.11

This pilot kit comprises: pneumatic ON/OFF switch, maximum 235 psi operating pressure, twin 4mm OD polyurethane tube, length 10m, plastic box.

oz

ØG

L

ØD

N

ØD Transair® G L N40 4002 40 00 67.0 205.0 122.0 21.16

63 4002 63 00 67.0 278.0 185.0 85.54

oz

ØD Transair® G L N Z1 Z216.5 4099 17 00 34.0 121.0 69.0 27.0 40.0 13.82

25 4099 25 00 44.5 151.7 108.3 41.0 59.0 43.38

oz

Model 4099 17 00: supplied with Ø6 mm plug Model 4099 25 00: supplied with Ø8 mm plug

Ø40 Ø63

Ball valve

ØD Transair® A B D L K R3" VR01 L1 00 65 102 75 185 170 145 320 24.25

4" VR01 L3 00 100 136 104 220 190 180 380 43.43

VR01

DN

Delivered with 15/16” bolts

VR01 L1 00• Body Treated steel

lbs


Tr a n s a i r®

We recommend however that the pipework systemis drained prior to assembly of an outlet.

Thanks to lateral dismantling of Transair® pipe andthe “easily assembled” outlet brackets (see pages 6-9),

this operation can be done very quickly(less than 7 min. for a new outlet)

and guarantees the interior cleanliness of the circuit.

Pressurized system drilling tool

C Ø Transair® L E N

EA98 Pressurized system bracket

ØD Transair®

25 EA98 06 01

40 EA98 06 02

63 EA98 06 03

EA98

Pressurized system outlets

• Ideal for fast assembly of new pressurized outlets,without venting the compressed air system.

• The drilling tool can be used with moststandard drills.

Materials Pressurized system drilling tool:• Body - aluminum• Drill - steel• Adapter and Cap - brass• Silencer - plastic

Ball valve with bracket(1/2” NPT thread)

oz

MaterialsRP00: cartridge: engineering grade polymer / NBR sealEW04: treated steel

Tr a n s a i r®

Prise d’air sous pres-Spare parts

Cartridge

ØD Transair® M N3" RP00 L1 00 98.7 51.4 2.82

4" RP00 L3 00 123 52.8 4.59

RP00 Bolts for steel clamp RR01

C Transair® LM8 EW04 00 01 30

EW04

13

C Ø Transair® L E N

G1/2 13 EA98 06 00 330.0 154.0 30.5 19.22

oz


• Practical tools for the installation and extension of Transair® air pipe networks • Presented in a carrying case, or available as separate parts

Tools

14

Drilling kit25 mm and 40 mm

6698

Transair® H L6698 01 01 120 80 30.33

oz

Deburring toolfor pipe

6698

Transair® L6698 04 02 140 0.70

oz

Pipe Cutter6698

Transair®

6698 03 01 28.80

oz

Drilling tool63 mm

6698

H

L

Transair® H L6698 01 02 134 155 3.81

lbs

Chamfer tool6698

Transair® H6698 04 01 64 13.05

oz

Drilling toolfor calibrated aluminum pipe

6698

ØD1 ØD2 Transair® H16 12 6698 02 02 25 71 5.18

22 12 6698 02 01 40 - 63 71 5.22

ozFor pipeTransair®

May be used with all types of drills. • Rotation speed: 650 rpm maximum.For 16.5, 25, 40 and 63 mm.

After drilling, deburr and clean the pipe.

After drilling, deburr and clean the pipe. For 16.5, 25 and 40 mm.


Tr a n s a i r®

15

Set of tightening spanners for 63mm pipe

Transair®

6698 05 03 1.675

lbs

Transair®lbs

V Transair®

lbs lbs

6698 Tool case for 16.5mm - 63mm

Transair® H L6698 00 03 315 290 13.0

lbs

6698

This set includes 2 tightening spanners. This tool case simplifies the use and transportation of tools.It contains all the tools necessary for completing a Transair® installation:

- Drilling fixtures 6698 01 01 and 6698 01 02- Drilling tools 6698 02 01 and 6698 02 02- Cutter for pipe 6698 03 01- Chamfer tool 6698 04 01- Deburring tool 6698 04 02- Set of tightening spanners(2)6698 05 03- Marking tool 6698 04 03

Marking toolfor aluminum pipe

6698L1

L2

H

Transair® H L1 L26698 04 03 88 73 33 0.38

oz

The marking tool enables connection guidelines to be marked on cut lengths of Transair® pipe. These marksindicate the insertion limits of the pipe into the fitting in order to ensure good airtight connection and securityof grip.

Portable tool kit for 3” and 4”

110 EW01 00 02 20.94

EW01

Jaws for portable toolEW02

3" EW02 L1 00 103 52 154 46 5.73

4" EW02 L3 00 103 71 154 46 6.17

12V battery for portable toolEW03

Transair®

EW03 00 01 1.48

This case contains: 1 portable tool, 1 12 V battery and 1 battery charge.


• Can be adapted to all pipework configurations • For suspension of pipes, from walls, partitions, beams, cable trays,

vertically and horizontally• Perfectly suited for use with Transair® systems

Fixture accessories

16

U-channel, 2 meters

L

L1

H

Transair® H L (m) L16699 01 01 25 2 25 3.30

lbs

6699Fixing clip for rigid pipe

C

L

ØD

K

HH1

ØD C Transair® H1 H K L16.5 1/4 6697 17 01 46 61 30 32.5 0.95

25 1/4 6697 25 01 46 65.5 30 38.5 1.06

40 1/4 6697 40 01 46 74.5 30 50 1.27

63 3/8 6697 63 01 90 127.5 30 73.5 2.82

6697

Threaded rod adapter

F

H

C1

C2

E

Transair® E F H1/4” x 3/8” 0169 00 05 00 16 13 30 1.06

0169

U-channel fixing bracket

L

H

Transair® H L6699 01 02 106 40 6.00

oz

6699

Transair® fixing clips are designed to bear a maximum weight of 44lbs. However, to ensure good stability of the network, we recommend the use of at least 2 clips per pipe i.e:

- maximum 5 ft space between clips for 10 ft lengths of pipe.- maximum 10 ft space between clips for 20 ft lengths of pipe.

Use only this clip for fixing Transair® rigid pipe, all other type of pipe clips are to be avoided.Fix the clip to a rigid support (U-channel, cable tray) to allow for expansion while retaining the pipe.

The use of this adapter facilitates the suspension of Transair® under 3/8” threaded rod.

Materials - Fixing clips: polymer H.R. - Spacer: polymer H.R.- Clip adapter: brass

- Set of fixing accessories: galvanized steel- U-channel: galvanized steel

The set comprises:- 1 bracket- 1 screw- 1 nut- 1 end cap

oz

Spacer

H H1

ØD

L K

ØD Transair® H H1 K L11 6697 00 03 49.5 44 34 33 .705

6697

This spacer, in association with the Transair® clip, allows consistent alignment of pipes.

oz

90mm

46mm

44mm

Ø63 Ø40

90 mm46 mm44 mm

oz


oz

Tr a n s a i r®

Fixing clip for rigid pipe.

ØD Transair® C3" EX01 L1 00 3/8” 4.09

4" EX01 L3 00 3/3” 4.73

EX01

Transair® fixing clips are designed to bear a maximum weight of 440 lbs. However, to ensure good stability of the network, we recommend the use of at least 2 clips per pipe i.e:

- maximum 5 ft space between clips for 10 ft lengths of pipe.- maximum 10 ft space between clips for 20 ft lengths of pipe.

Use only this clip for fixing Transair® rigid pipe, all other type of pipe clips are to be avoided.Fix the clip to a rigid support (U-channel, cable tray) to allow for expansion while retaining the pipe.

Materials

- Clip fixing for rigid pipe: stainless steel 316 - material n° 1.4401 - Flange: stainless steel 304 – material n° 1.4301, in accordance with ASTM A774

- Set of fixing accessories: galvanized steel- Clip fixing set Ø 3" - Ø 4": galvanized steel

Flange gasketEW05

ØD Transair®

3" EW05 L1 00 .95

4" EW05 L3 00 1.76

FlangeRX30

ØD Transair® D1 D2 D3 E L

3" RX30 L1 00 185 145 18 18 75 7.05

4" RX30 L3 00 220 180 18 22 75 12.02

Flange bolt kitEW06

C Transair® L

15/16” EW06 00 01 60 3.18

Gasket: compressed elastomer fiberBolts and Nuts: treated steel

oz

17

lbs

oz


Tr a n s a i r®

• Suitable fluids: compressed air, argon, nitrogen(please consult us for other fluids)

• Working pressure: 232 psi maximum• Working temperature: from -4°F to +140°F

Male body, NPTCP05

Female body, NPTCP15

Body with hosetailCP21

Female straight plug, NPTCA83

Barbed connector plugCA94

Male straight plug, NPTCA84

• For quick and repetitive connection and disconnection • 100% safety - ISO 4414 and EN983 compliant• Very high flow, extremely small pressure loss• Lightweight and robust• Improved hand grip• Fast vent time

Materials • Body: reinforced polymer• Sleeve: reinforced polymer• Spring: stainless steel• Seal: nitrile• Thread: nickel plated brass

• Ball bearings: stainless steel• Plug: nickel plated brass

C Transair®

1/4 CP05 U1N02

3/8 CP05 U1N03

1/2 CP05 U1N04

C Transair®

1/4 CP15 U1N02

3/8 CP15 U1N03

1/2 CP15 U1N04

C Transair®

1/4 CA84 U1N02

3/8 CA84 U1N03

ØD Transair®

6 CP21 U1 06

8 CP21 U1 08

10 CP21 U1 10

C Transair®

1/4 CA83 U1N02

3/8 CA83 U1N03

ØD Transair®

6 CA94 U1 06

8 CA94 U1 08

10 CA94 U1 10

Flow curve - pressure lossPressure loss in PSI.

Flow in cfm

Safety ISO 6150 BAFNOR NF 49-053US.MIL.C4109CEJN 310RECTUS 23-24

Flow: 44 cfm

00

2.9

5.8

8.7

11.6

18 35 53

18

Composite automatic safety couplers – ISO B profile - 1/4" body


Transair® composite automatic safety couplers complywith worldwide ISO 4414 and European EN983

safety standards. Disconnection is by a double twist of the sleeve – a safety feature that breaks deliberately with

common practice in order to avoid accidental disconnection.

Composite automatic safety couplers – ISO B profile - 3/8" body

Male body, NPTCP05




Barbed connector plugCA94


Materials • Body: reinforced polymer• Sleeve: reinforced polymer• Spring: stainless steel• Seal: nitrile

• Ball bearings: stainless steel• Plug: nickel plated brass, nickel plated steel

C Transair®

1/4 CP05 U2N02

3/8 CP05 U2N03

1/2 CP05 U2N04

C Transair®

1/4 CP15 U2N02

3/8 CP15 U2N03

1/2 CP15 U2N04

C Transair®

1/4 CA83 U2N02

3/8 CA83 U2N03

ØD Transair®

8 CA94 U2 08

10 CA94 U2 10

13 CA94 U2 13

ØD Transair®

8 CP21 U2 08

10 CP21 U2 10

13 CP21 U2 13

C Transair®

1/4 CA84 U2N02

3/8 CA84 U2N03

Flow curve – pressure lossPressure loss in PSI

Flowin cfm

Safety ISO 6150 BAFNOR NF 49-053US.MIL.C4109CEJN 430RECTUS 30

1st rotation in direction of the arrow: circuit rapidly

flushed out, probe side.

2nd rotation in direction of the arrow: safe disconnection of body and plug.

21

Flow: 85 cfm

00

.9

5.8

8.7

11.6

18 35 53 71 88

19

Tr a n s a i r®


20

Materials • Body: reinforced polymer• Sleeve: reinforced polymer• Spring: stainless steel• Seal: nitrile

• Ball bearings: stainless steel• Plug: nickel plated brass, nickel plated steel

Male body, NPTCP05





Flow curve – pressure lossPressure loss in PSI.

C Transair®

1/4 CP05 A1N02

3/8 CP05 A1N03

1/2 CP05 A1N04

C Transair®

1/4 CA84 A1N02

3/8 CA84 A1N03

C Transair®

1/4 CA83 A1N02

3/8 CA83 A1N03

C Transair®

1/4 CP15 A1N02

3/8 CP15 A1N03

1/2 CP15 A1N04

ØD Transair®

6 CP21 A1 06

8 CP21 A1 08

10 CP21 A1 10

1st rotation in direction of the arrow: circuit rapidlyflushed out, probe side.

2nd rotation in direction ofthe arrow: safe disconnectionof body and plug.Transair® composite automatic safety couplers comply

with worldwide ISO 4414 and European EN983 safety standards. Disconnection is by a double twist of

the sleeve – a safety feature that breaks deliberately with common practice in order to avoid accidental disconnection.

Safety ARO 210CEJN 300ORION 44510PARKER 50RECTUS 14-22

21

Flowin cfm

Flow: 44 cfm

00

2.9

5.8

8.7

11.6

18 35 53

Composite automatic safety couplers – ARO profile - 1/4" body


21

Blowgun

L

C

DN

H

EA58

Flow 87 psi: 15cfm (430 Nl/min.)

C Transair® H LG1/4 3.5 EA58 00 14 125.5 223.0 2.65

oz

Hose reels• Optimize productivity and the safety of your workstations• Prevent hose damage occurring on the workshop floor• Maximum working pressure, dependent on the model:

- 6698 11 11: 250 psi- 6698 11 12: 250 psi

• Working temperature: -4°F to +140°F

Blowgun• Dusting, cooling and drying components• Cleaning swarf• Cleaning machinery• Working pressure: 174 psi maximum• Working temperature: -4°F to +140°F

Heavy duty series hose reel, 25ft & 50ft

ØD Transair® H L21/32" 6698 11 11 3/8" 12 14 1/2" 13 3/4" 35

21/32" 6698 11 12 3/8" 15 18 1/4" 17 1/4" 51

lbs

6698

Open case with roller guidesHose clutch with free returnOutlet connection 3/8" male

Materials• Heavy duty hose reel: - polyurethane hose; case: metal; fixing base: brass and stainless steel

• Blowgun: - body: reinforced composite; nozzle: aluminum

Hose i.d.(in)

Max hosepressure (bar) DN

Tr a n s a i r®

Hose reels - Blowgun


Transair® FRLs are ideal for general purpose use and can be fitted downstream of the compressed air installation and attake-off points on workstations and machines:• Air quality at FRL inlet: dry, damp, oiled • Transair® FRL products are guaranteed silicone free• Chemical resistance to compressor oils

22

Filter regulator6730

All products presented above can be easily connected to Transair®, compressed air pipework systems using the following Transair® stud fittings:• 6605 17 14 for 1/4 port (page 6)• 6605 17 22 or 6605 25 22 for 1/2 port (page 6)

6730 00 14: model for 1/46730 00 22: model for 1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: 1/4 = 20 cfm- 1/2 = 67 cfmBowl capacity: 1/4 = 22cm3- 1/2 = 50cm3

To be used with gauge: 6798 00 05 for 1/46798 00 06 for 1/2

Pressure regulator67316731 00 14: model for 1/4

6731 00 22: model for 1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +140°FRecommended flow: 1/4 = 20 cfm - 1/2 = 67 cfmTo be used with gauge: 6798 00 05 for 1/4

6798 00 06 for 1/2

Filter separator67326732 00 14: model for 1/4

6732 00 22: model for 1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to + 122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: 1/4 = 20 cfm - 1/2 = 67 cfmBowl capacity: 1/4 = 22cm3 - 1/2 = 50cm3

Lubricator67336733 00 14: with 1/4 port

6733 00 22: with 1/2 portOil mist lubricatorMax inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: -4°F to +122°F (to 145 psi)Oil capacity: 1/4 = 45cm3- 1/2 = 112cm3

With flow compensation.

3/2 in-line vent valve67346734 00 14: with 1/4 port6734 00 22: with 1/2 port3/2 lockable shut-off valveMin pressure: 0 psi - Max pressure: 232 psiTemperature: 32°F to +140°FDownstream circuit drains when valve is closedRecommended flow: 1/4 = 20 cfm - 1/2 = 67 cfmSupplied without padlock.

Front and rear port connector block67356735 00 14: with 1/4 port6735 00 22: with 1/2 port

To be used when assembling 2 elements front andrear entry: G1/8 and G1/4.

Automatic drain 67366736 00 22: model for 1/2

Condensate drain: - automatic- float type

Filter regulator lubricator set67376737 00 14: model for 1/46737 00 22: model for 1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: 1/4 = 20 cfm - 1/2 = 67 cfmMax bowl capacity: 1/4 = 22cm3 - 1/2 = 50cm3


Filter regulator and lubricator with gauge67386738 00 14: model for 1/46738 00 22: model for 1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: 1/4 = 20 cfm - 1/2 = 67 cfmMax bowl capacity: 1/4 = 22cm3 - 1/2 = 50cm3


Gauge67986798 00 05: 1/8 thread for FRL 1/4 - 40 mm gauge diameter6798 00 06: 1/4 thread for FRL 1/2 - 50 mm gauge diameterTo be mounted on the front face of the filter regulatoror the regulator.

Protection bowl67986798 00 07: model with 1/4 thread, with snap mounting6798 00 08: model with 1/2 thread, with snap mountingTo be used with filter regulator, filter, lubricator.

Mounting brackets and assembly kit67986798 00 01: with 1/4 port6798 00 02: with 1/2 portFor wall or machine fixing.Screws supplied.Center-to-center: 46 mm (compatible with Transair® fixing clips).Assembly kit, to assemble several elements.6798 00 03: with 1/4 port6798 00 04: with 1/2 port

FRLs, Automatic drain and accessories


Tr a n s a i r®

23

NPT orifice

4962 60 14 1/4 .394962 60 18 3/8 .394962 65 22 1/2 .594962 70 28 3/4 .794962 75 35 1 .984962 82 43 1-1/4 1.264962 90 50 1-1/2 1.574962 01 49 2 1.97

Pressure rating 600 PSI Temperatures to 320°F

NPT orifice

0489 07 14 1/4 .270489 10 18 3/8 .390489 13 22 1/2 .510489 18 28 3/4 .700489 23 35 1 .90

Pressure to 580 PSITemperatures to 175°F

NPT orifice

0499 07 14 1/4 .270499 10 18 3/8 .390499 13 22 1/2 .510499 18 28 3/4 .700499 23 35 1 .90

Pressure to 580 PSITemperatures to 175°F

ball valves4962general purpose ball valve

0489vented ball valve with tapped exhaust

0499lockable vented ball valve withtapped exhaust

O.D.TUBE

NATURAL1094P56 00 1/41094P58 00 5/161094P60 00 3/81094P62 00 1/2BLACK1094P56 01 1/41094P58 01 5/161094P60 01 3/81094P62 01 1/2

O.D.TUBE

BLUE1094P56 04 1/41094P58 04 5/161094P60 04 3/81094P62 04 1/2

O.D.TUBE

CLEAR1094U56 00 1/41094U58 00 5/161094U60 00 3/81094U62 00 1/2BLACK1094U56 01 1/41094U58 01 5/161094U60 01 3/81094U62 01 1/2

O.D.TUBE

BLUE1094U56 04 1/41094U58 04 5/161094U60 04 3/81094U62 04 1/2

O.D.TUBE

NATURAL1096Y56 00 1/41096Y58 00 5/161096Y60 00 3/81096Y62 00 1/2BLACK1096Y56 01 1/41096Y58 01 5/161096Y60 01 3/81096Y62 01 1/2

O.D.TUBE

BLUE1096Y56 04 1/41096Y58 04 5/161096Y60 04 3/81096Y62 04 1/2YELLOW1096Y56 05 1/41096Y58 05 5/161096Y60 05 3/81096Y62 05 1/2

1094Psemi-rigid tubing (nylon 11) 100foot rolls

1096Ylow density polyethylene tub-ing 250 foot rolls

1094Upolyurethane100 foot rolls

tubing — fractional


24

brass pipe fittings

3000 71 00

accessories3000tube cutter

Legris clips can be used to mount both tubing and fittings. To order clips for tubing, use the column“O.D. Tube”. To order clips for mounting a fitting, order by the “O.D. body size”. Clip strips are pack-aged in quantities of 5, but ordered by individual strip.

O.D. LF 3000 # OF CLIPSTUBE O.D. BODY SIZE H K N PER BARRETTE

4 mm, 5/32 Clip 04 00 9 13.5 10.5 86 mm, 1/4, 3/16 Clip 06 00 10.5 13 10.5 88 mm, 5/16 Clip 08 00 4 mm or 5/32 12.5 10.5 12 710 mm, 3/8 Clip 10 00 6 mm or 1/4 14 12 15 612 mm, 1/2 Clip 12 00 16.5 14 16.5 514 mm Clip 14 00 8 mm or 5/16 18 16 20.5 4

cliptube clip

NPT C D LT1 T2 HEX

110-L-DA 1/2 x 1/8 7/8 .217 1110-L-DB 1/2 x 1/4 7/8 .309 1110-L-DC 1/2 x 3/8 7/8 .435 1

110-Lpipe bushing

tubing — metric

COLOR O.D. TUBE I.D. TUBE(in.) (in.)

1481 00 05 03 NEON GREEN 1/4 3/16(with end fittings)1481 00 05 02 NEON GREEN 1/4 3/16(without end fittings)

1481Upolyurethane recoil assemblywith 1/4" NPT end fittings

COLOR O.D. TUBE I.D. TUBE (in.) (in.)

1480P56 05 14 YELLOW 1/4 3/161481P56 05 14 YELLOW 1/4 3/161482P56 05 14 YELLOW 1/4 3/161483P56 05 14 YELLOW 1/4 3/161484P56 05 14 YELLOW 1/4 3/161480P56 07 14 ORANGE 1/4 3/161481P56 07 14 ORANGE 1/4 3/161482P56 07 14 ORANGE 1/4 3/161483P56 07 14 ORANGE 1/4 3/161484P56 07 14 ORANGE 1/4 3/16

1480Pnylon recoil hose assemblieswith 1/4" NPT end fittings

O.D. NPTTUBE

7065 56 11 1/4 1/87065 56 14 1/4 1/47065 60 14 3/8 1/47065 60 18 3/8 3/8

O.D. UNF/TUBE NPT

7660 56 20 1/4 10-327665 56 11 1/4 1/87665 56 14 1/4 1/4

7660/7665mini exhaust

O.D.TUBE

7996 56 00 1/47996 08 00 5/16

7996in-line check valve

flow controls7065compact banjo

WORK LENGTH(ft.)

4 ft.8 ft.

12 ft.16 ft.32 ft.4 ft.8 ft.

12 ft.16 ft.32 ft.


Tr a n s a i r®

25

O.D. NPTTUBE

3175 56 14 1/4 1/43175 56 18 1/4 3/8 3175 08 11 5/16 1/83175 08 14 5/16 1/43175 08 18 5/16 3/83175 60 11 3/8 1/83175 60 14 3/8 1/43175 60 18 3/8 3/83175 60 22 3/8 1/23175 62 14 1/2 1/43175 62 18 1/2 3/83175 62 22 1/2 1/2

O.D. NPT/TUBE UNF

3103 56 14 1/4 1/43103 56 18 1/4 3/8 3103 08 11 5/16 1/83103 08 14 5/16 1/43103 08 18 5/16 3/83103 60 11 3/8 1/83103 60 14 3/8 1/43103 60 18 3/8 3/83103 60 22 3/8 1/23103 62 14 1/2 1/43103 62 18 1/2 3/83103 62 22 1/2 1/2

O.D. NPTTUBE

3014 56 14 1/4 1/43014 08 11 5/16 1/83014 08 14 5/16 1/43014 60 14 3/8 1/43014 60 18 3/8 3/83014 62 18 1/2 3/83014 62 22 1/2 1/2

O.D. NPTTUBE

3148 56 14 1/4 1/43148 60 14 3/8 1/43148 60 18 3/8 3/8

O.D. NPTTUBE

3008 56 14 1/4 1/43008 08 11 5/16 1/83008 08 14 5/16 1/43008 60 14 3/8 1/43008 62 18 1/2 3/8

O.D. NPTTUBE

3129 56 14 1/4 1/43129 08 11 5/16 1/83129 08 14 5/16 1/43129 60 14 3/8 1/43129 60 18 3/8 3/8

O.D.TUBE

3126 56 00 1/43126 08 00 5/163126 60 00 3/83126 62 00 1/2

LF 3000 push-in fittings – fractional3175tube to male NPT

3103male run tee — tube to tube to male NPT

3014straight female connector —tube to NPT

3008female branch tee — tube to NPT

3129extended male elbow — tube tomale NPT

3126plug

3148“Y” male NPT — tube

10-32 O-ring replacement part # 31419

O.D. NPTTUBE

3166 56 08 1/4 5/163166 56 60 1/4 3/83166 56 62 1/4 1/2 3166 08 60 5/16 3/83166 08 62 5/16 1/23166 60 62 3/8 1/2

O.D.TUBE

3106 56 00 1/43106 08 00 5/163106 60 00 3/83106 62 00 1/2

O.D.TUBE

3104 56 00 1/43104 08 00 5/163104 60 00 3/83104 62 00 1/2

O.D.TUBE

3102 56 00 1/43102 08 00 5/163102 60 00 3/83102 62 00 1/2

3102union elbow — tube to tube

3104tee — tube to tube to tube

3166reducer

3106union — tube to tube

3009female elbow — tube to NPT

3108male branch tee — tube tomale NPT to tube

O.D. NPT/TUBE UNF

3108 56 14 1/4 1/43108 56 18 1/4 3/8 3108 08 11 5/16 1/83108 08 14 5/16 1/43108 08 18 5/16 3/83108 60 11 3/8 1/83108 60 14 3/8 1/43108 60 18 3/8 3/83108 60 22 3/8 1/23108 62 14 1/2 1/43108 62 18 1/2 3/83108 62 22 1/2 1/2

O.D. NPTTUBE

3009 56 14 1/4 1/43009 08 11 5/16 1/83009 08 14 5/16 1/43009 60 14 3/8 1/43009 62 18 1/2 3/8

3109male elbow — tube to male NPT

O.D. NPT/TUBE UNF

3109 56 14 1/4 1/43109 56 18 1/4 3/8 3109 08 11 5/16 1/83109 08 14 5/16 1/43109 08 18 5/16 3/83109 60 11 3/8 1/83109 60 14 3/8 1/43109 60 18 3/8 3/83109 60 22 3/8 1/23109 62 14 1/2 1/43109 62 18 1/2 3/83109 62 22 1/2 1/2

O.D. UNF/TUBE NPT

3118 56 20 1/4 10-323118 56 11 1/4 1/83118 56 14 1/4 1/43118 56 18 1/4 3/83118 60 14 3/8 1/43118 60 18 3/8 3/8

3118banjo


26

Installation guide

164 ft 328 ft 492 ft 984 ft 1640 ft 2461 ft 3281 ft 4265 ft 5249 ft 6562 ftNm3/h Nl/min Cfm 50 m 100 m 150 m 300 m 500 m 750 m 1000 m 1300 m 1600 m 2000 m

10 167 6 16.5 16.5 16.5 16.5 16.5 16.5 16.5 25 25 2530 500 18 16.5 16.5 16.5 25 25 25 25 25 25 4050 833 29 16.5 25 25 25 25 25 40 40 40 4070 1167 41 25 25 25 25 40 40 40 40 40 40100 1667 59 25 25 25 40 40 40 40 40 40 63150 2500 88 25 40 40 40 40 40 40 63 63 63250 4167 147 40 40 40 40 63 63 63 63 63 63350 5833 206 40 40 40 63 63 63 63 63 63 76500 8333 294 40 40 63 63 63 63 63 76 76 76750 12500 441 40 63 63 63 63 76 76 76 76 761000 16667 589 63 63 63 63 76 76 76 100 100 1001250 20833 736 63 63 63 76 76 100 100 100 100 1001500 25000 883 63 63 63 76 100 100 100 100 100 1001750 29167 1030 63 63 76 76 100 100 100 100 100 1002000 33333 1177 63 76 76 100 100 100 100 100 100 1002500 41667 1471 63 76 76 100 100 100 100 100 100 1003000 50000 1766 76 76 76 100 100 100 100 100 100 1003500 58333 2060 76 76 100 100 100 100 100 100 100 1004000 66667 2354 76 100 100 100 100 100 100 100 100 1004500 75000 2649 76 100 100 100 100 100 100 100 100 1005000 83333 2943 76 100 100 100 100 100 100 100 100 1005500 91667 3237 100 100 100 100 100 100 100 100 100 1006000 100000 3531 100 100 100 100 100 100 100 100 100 100

Flow rateEquivalent length

Instructions

Select the Transair® diameter for your application based on required flow and pressure drop.

1 • Areas of application

Before installing Transair®, a responsible person should check that the

area of installation conforms to regulations designed to prevent the risk

of explosion (in particular the risks associated with static electricity in silo

zones) Transair® must be installed either after the air receiver or the dryer.

Flexible Transair® hose should be fitted at the beginning of the pipe

system, in order to counter the vibrations found in any compressed air

system. When maintaining or modifying the Transair® pipe system, the

work must be undertaken only after the compressed air system has been

vented. The installer must use only Transair® components and accesso-

ries, and in particular, Transair® pipe clips. No other type of pipe mounting

method is to be used. The technical characteristics of Transair® compo-

nents as expressed in this catalog must be respected.

2 • Starting the installed system

Once assembled, the operation of the Transair® installation is the responsibility of

the installer who, prior to use, must complete all necessary tests.

The installer must also ensure that the installation has been properly carried out in

line with the instructions and that it meets all legal requirements.

3 • Transair® pipe

Care should be taken to protect pipes against mechanical shocks – especially when

close to the passage of fork-lift trucks or where suspended objects are being

moved. Equally all excessive rotational movements which could lead to disconnec-

tion, whether on the pipes or the supports, must be avoided. Flexible Transair®

hose must be used in accordance with the instructions in this catalog.

4 • Contraction/expansion

The performance of the Transair® system is maintained when the effects

of expansion or contraction are properly taken into account.

5 • Assembling the components

To ensure proper installation Transair® components are supplied with an

“Assembly Guide”. The installer must follow with care the precise

instructions as described in this guide as well as this catalog

6 • Supports

When suspending from a ceiling Transair® pipe clips should be fixed to a

support (U channel, cable tray, threaded rod, etc).

This type of support ensures that the clips stay in alignment which allows the pipe

to expand and contract.

7 • Observations

When using Transair® the following situations must be avoided:

• embedded in a solid mass (concrete, injected foam)

• fixing other external elements to Transair® pipe (other than

blowguns, plastic tubes etc with a maximum weight of 20 ozs

between 2 clips).

• the use of Transair® as an electric grounding or to support

electrical material.

• the use of Transair® with non-compatible components.

(Please consult us).

Values are for a pressure of 115 psi, 5% pressure drop.


Tr a n s a i r®

27

WARNING: Installation and assembly must be completed as set forth in the Installation Guide and Assembly Guide. Failure to comply precisely with theseinstructions can cause unsafe operating conditions and serious personal injury or death. Compressed air systems involve inherent hazards, and if pieces arenot properly assembled and installed, end pieces could blow off, creating the potential for serious injury to those in the area, and pipe and joint breakage andair leaks may occur, exposing those in the area to the risk of injury from air under pressure or from falling or moving pipes or other parts of the system. Take particular care with installation of end caps and wall brackets. Additional requirements include:

• Only compatible Legris products may be used together and included in any installation. Fittings are very sensitive to sizes, so proper parts must always be used.

• For TRANSAIR® installation outdoors, please consult factory.

• The TRANSAIR® installation must not be embedded in a solid mass, such as concrete, injected foam, or similar materials.

• The TRANSAIR® installation must not be in water or any other liquid.

• The TRANSAIR® installation is to be used only for compressed air and inert gases; for other fulids, please consult the factory.

• The TRANSAIR® installation may be attached to a ceiling only if the clips are fixed to a solid base or to 3/8" threaded rod hangers. The base must allow aproper alignment of fixing clips in order to ensure their stability and efficiency when normal expansion and contraction occur.

• The TRANSAIR® installation must be protected against mechanical and other shocks and impacts, and particular care must be taken to protect tubesand other components in areas where fork lift trucks, other moving vehicles, moving equipment, or other activity creates a risk of contact with the TRAN-SAIR® system.

• TRANSAIR® rigid tubes must not be bent, welded, twisted or deformed. Such conduct decreases the strength and integrity of the tubes.

• TRANSAIR® tubes and connectors must not be subjected to greater numbers of rotations than are specified in the installation and assembly guides.

• Other external components (except for compatible Legris components) may not be attached to the TRANSAIR® assembly. Excessive weight on the systemincreases stress on the system and increases the risk of failure or leakage.

• The TRANSAIR® system may not be used as a support or to convey conduit or other electrical systems.

• The effects of expansion and contraction in the particular application must be considered, to avoid having components become deformed, leading to fail-ure.

• All of the technical characteristics of the TRANSAIR® system must be taken into account in the installation and assembly for the particular application.The technical characteristics are found in the TRANSAIR® catalog and the Installation Guide.

• All TRANSAIR® assembly and installation must be done by properly trained personnel familiar with the products, their characteristics, their limitations, the hazards involved, OSHA and other applicable safety requirements, and the assembly and installation requirements.

• The TRANSAIR® products and installation must be serviced only by trained and certified personnel as described above.

• The TRANSAIR® installation must meet all safety standards in OSHA or any other applicable regulations, requirements or standards.

• Air pressure in the system must not exceed 232 PSI. Higher pressures increase the risks of breakage and leaks.

• The TRANSAIR® system may not be used in an environment with ambient temperatures in excess of 140° F. Such temperatures may cause leakage inseals.

• The air pressure must be turned off during assembly, installation, repair, service or replacement.

• The TRANSAIR® system should be pressure tested after installation is complete, but before the system is put into operation. Likewise, the system shouldbe pressure tested after any servicing or repairs, and after any abnormal circumstances, such as extreme temperatures or physical shock.

• All procedures and descriptions in the Installation Guide must be followed.

Failure to follow these requirements will increase the risk of serious injury, as well as increase the likelihood of operating failures.

LIMITED WARRANTY

Legris-Transair warrants its products to be free of defects in material and workmanship for a period of two (2) years from the date of purchase of theproducts. Legris-Transair makes no other warranties, express or implied. This limitation explicitly excludes any implied warranty of merchantability or fitness for aparticular purpose. The sole remedy for breach of this warranty of material and workmanship or for negligence in manufacture or design is limited to replacement orrepair, at the sole option of Legris-Transair, of any defective parts which are returned to Legris-Transair (prepaid) within two (2) years of original purchase. In no eventshall Legris-Transair be liable for indirect, special, incidental or consequential damages of any kind. No allowance will be made for repairs made by the purchaser.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER WARRANTIES AND REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING BUTNOT LIMITED TO, THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THE WARRANTY OF MERCHANTABILITY. LEGRIS-TRANSAIR MAKES NO WAR-RANTY THAT THE GOODS SOLD HEREUNDER ARE DELIVERED FREE OF THE RIGHTFUL CLAIM OF ANY THIRD PARTY BY WAY OF INFRINGEMENT OR OTHER-WISE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCTSSHALL BE ONLY AS STATED HEREIN.

Legris-Transair does not warrant the design, assembly or installation of the system, but only the components as stated herein. Legris-Transair is notresponsible for improper design, assembly or installation, or for any modifications of the Legris-Transair products. The warranty herein is void upon (a) failure to fol-low any of the assembly or installation guidelines, (b) installation, repair or relocation of the components by a person other than a trained and qualified installer; (c)alteration, misuse or abuse of, or damage to, any of the Legris-Transair products, (d) operation beyond the design range, excessive pressure or stress, or mishan-dling in any way, (e) use other than for the intended purpose or in a manner other than as specified by Legris-Transair, or (f) improper assembly, installation, serviceor maintenance. This Limited Warranty, and Legris-Transair’s responsibility, may be further limited, but may not be expanded, by Legris-Transair’s terms and condi-tions of sale, as set forth on the reverse side of the Legris-Transair invoice.

Warranty


28

Legris SA – Head OfficeBP 7041135704 RENNES cedex 7tel: +33 2 99 25 55 00 fax: +33 2 99 25 55 99

ARGENTINAAutomacion Micromecanica SAICMariano Moreno 6546 –1875 Wilde – Bs Astel: +54 11 4207 6285fax: +54 11 4206 [email protected]

AUSTRALIALegris Australasia Pty LtdUnit 108 Mc Lachlan AvenueARTAMON N.S.W. 2064ACN 073509196tel: +61 2 94 36 43 00fax: +61 2 94 39 65 [email protected]

AUSTRIALegris GesmbHAm Concorde Park 1/E22320 SCHWECHATtel: +43 1 706 33 34fax: +43 1 706 33 [email protected]

BELGIUM + LUXEMBOURGLegris Belgium S.A100 rue du BourdonBRUXELLES 1180tel: +32 2 333 09 99fax: +32 2 332 11 [email protected]

BRAZILLegris do Brasil LtdaAv.Imperador Pedro II, n.1.20109770 – 420 S.B.C SAO PAULOtel: +55 11 4332 9200fax: +55 11 4332 [email protected]

CHINALegris WuxiFluid Control Systems Co LtdXing Chuang Road, n°2Wuxi Singapore Industrial ParkP.R.C 214028 WUXI, JIANGSUtel: +86 510 528 2625fax: +86 510 528 2976

CZECH REPUBLICLegris SROBrnenska 668664 42 MODRICEtel/fax: +420 5 4721 6301

DENMARKLegris Danmark A/SKlokkestobervej 25APostbox 239490 PANDRUPtel: +45 98 204 111fax: +45 98 204 311

FRANCELegris Transair France74 rue de Paris - BP 7041135 704 RENNES cedex7tel: +33 2 99 25 55 00fax: +33 2 99 25 56 [email protected]

GERMANYLegris GmbHKurhessenstrasse 1564546 MORFELDEN WALLDORFtel: +49 6105 91 0924fax: +49 6105 91 [email protected]

HOLLANDLegris BVPostbus 74, 1380 AB WeespPampuslaam 112NL – 1382 JR WEESPtel: +31 29 44 80 209fax: +31 29 44 80 [email protected]

ICELANDSindra Stal hf.Borgatuni 31IS- 121 REYKJAVIKtel: +354 575 0000fax: +354 575 0010

INDIALegris India PVT Ltd99, Pace City – ISector 37GURGAON122 001 HARYANAtel: +91 1246 372 998fax: +91 1246 372 [email protected]

ISRAELIlan & Gavish Automation Service Ltd23 Shenkar Street49513 – PETAH TIQVAtel: +972 3 922 1824fax: +972 3 922 1850

ITALYLegris SpAVia Idiomi, 3 / 620090 ASSAGO (MI)tel: +39 02 48 86 13 11fax: +39 02 48 86 13 13

IVORY COASTPoly Service Technique15 BP 450 – ABIDJAN 15tel: +225 24 75 17telex: 42 513

JAPANNITTO KOHKI CO., LTD9-4 NAKAIKEGAMI 2-CHOMEOHTA-KUTOKYO 146tel: (03) 3755-1111fax: (03) 3753-2986

MOROCCOAFIT6 rue des Batignolles21700 CASABLANCAtel: +212 2 24 52 54fax: +212 2 24 52 54

POLANDAra PneumatikUl. Wyscigowa3853 – 012 WROCLAWtel: +48 71 364 7282fax: +48 71 3647 283

PORTUGALLegris LdaPç. Evaristo da Silva Duarte, 24Castelo da Maia4475–634 SANTA MARIA AVIOSOtel: +351 22982 1922fax: +351 22982 [email protected]

SCANDINAVIALegris Scandinavia ABSmedjevägen 2 B, Box 33S – 230 53 ALNARPtel: +46 40 462 490fax: +46 40 532 120legris.scandinavialegris.com

SINGAPORELegris SE Asia Pte Ltd8 Jalan Kilang Timor 01-04SINGAPOUR 159 305tel: +65 6271 60 88fax: +65 6274 99 78

SOUTH AFRICALegcon - Demcon Pty LtdPO BOX 38621BOOYENS 2016tel: +27 11-683-8335fax: +27 11-683-1080

SPAINLegris CenrasaPol. Ind. La FerreriaC/ de l'Alimentacio, 2 / 408110 MONTCADA Y REIXACHtel: +34 93 575 06 06fax: +34 93 575 38 07

SWITZERLANDLegris AGRue J; Renferstrasse 92504 BIELtel: 032 41 344 10 80fax: 032 41 344 10 [email protected]

TAIWANLegris Taiwan Company Ltd2F, No. 238 Kao-Kung RoadSouth DistrictTAICHUNGtel: +886 42 263 95 39fax: + 886 42 263 59 [email protected]

TURKEYMERTTersane Caddesi 43KARAKOY ISTANBULtel: +90 212 252 84 35fax: +90 212 245 63 69

UNITED KINGDOMLegris Limited1210 Lansdowne CourtGloucester Business Park, HucclecoteGLOUCESTER GL3 4ABtel: +44 (0)1452 623 500fax: +44 (0)1452 623 [email protected]

UNITED STATES OF AMERICALegris Incorporated7205 E Hampton Ave.MESA, ARIZONA 85208tel: +1 480 830 7764fax: +1 480 [email protected]

www.transair.legris.com


Tr a n s a i r®

Index

29

Index

Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page

0169 00 05 00 16 6605 17 22 6 6667 40 A1 8 6698 11 12 21 CA94 U1 10 18 EW06 00 01 17

1001E25 00 01 5 6605 25 22 6 6667 40 U1 8 6698 99 03 4 CA94 U2 08 19 EX01 L1 00 17

1001E25 00 03 5 6605 25 28 6 6667 40 U2 8 6699 01 01 16 CA94 U2 10 19 EX01 L3 00 17

1001E25 00 04 5 6605 25 35 6 6667 63 A1 8 6699 01 02 16 CA94 U2 13 19 FP01 L1 01 5

1001E25V00 01 5 6605 40 35 6 6667 63 U1 8 6730 00 14 22 CP05 A1N02 20 FP01 L1 02 5

1001E25V00 03 5 6605 40 43 6 6667 63 U2 8 6730 00 22 22 CP05 A1N03 20 FP01 L3 02 5

1001E25V00 04 5 6605 40 44 6 6673 17 A1 9 6731 00 14 22 CP05 A1N04 20 FP01 L3 03 5

1001E40 00 02 5 6605 40 50 6 6673 17 U1 9 6731 00 22 22 CP05 U1N02 18 RA69 25 17 8

1001E40 00 04 5 6605 63 41 6 6673 17 U2 9 6732 00 14 22 CP05 U1N03 18 RA69 40 25 8

1001E40 00 05 5 6605 63 44 6 6673 25 A1 9 6732 00 22 22 CP05 U1N04 18 RA68 25N04 8

1001E40V00 04 5 6605 63 46 6 6673 25 U1 9 6733 00 14 22 CP05 U2N02 19 RA68 40N04 8

1001E40V00 05 5 6606 17 00 6 6673 25 U2 9 6733 00 22 22 CP05 U2N03 19 RP00 L1 00 13

1001E40V00 07 5 6606 25 00 6 6674 17 A1 9 6734 00 14 22 CP05 U2N04 19 RP00 L3 00 13

1001E63 00 05 5 6606 40 00 6 6674 17 U1 9 6734 00 22 22 CP15 A1N02 20 RR01 L1 00 10

1001E63 00 06 5 6606 63 00 6 6674 17 U2 9 6735 00 14 22 CP15 A1N03 20 RR01 L3 00 10

1001E63 00 08 5 6607 25 00 7 6674 25 A1 9 6735 00 22 22 CP15 A1N04 20 RX02 L1 00 10

1001E63V00 05 5 6612 25 00 6 6674 25 U1 9 6736 00 22 22 CP15 U1N02 18 RX02 L3 00 10

1001E63V00 06 5 6612 40 00 6 6674 25 U2 9 6737 00 14 22 CP15 U1N03 18 RX04 L1 00 10

1013A17 04 00 4 6621 17 22 7 6676 25 00 6 6737 00 22 22 CP15 U1N04 18 RX04 L3 00 10

1013A25 04 00 4 6621 25 22 7 6676 40 00 6 6738 00 14 22 CP15 U2N02 19 RX04 L3 L1 10

1013A40 04 00 4 6621 25 28 7 6676 63 00 6 6738 00 22 22 CP15 U2N03 19 RX20 L1N04 10

1013A63 04 4 6621 40 43 7 6683 17 22 9 6798 00 01 22 CP15 U2N04 19 RX20 L3N04 10

1016A25 04 00 4 6621 40 50 7 6683 25 22 9 6798 00 02 22 CP21 A1 06 20 RX24 L1 40 10

1016A40 04 00 4 6625 17 00 7 6684 17 22 9 6798 00 03 22 CP21 A1 08 20 RX24 L1 63 10

1016A63 04 4 6625 25 00 7 6684 25 22 9 6798 00 04 22 CP21 A1 10 20 RX24 L3 40 10

4002 40 00 12 6625 40 00 7 6687 22 22 9 6798 00 05 22 CP21 U1 06 18 RX24 L3 63 10

4002 63 00 12 6625 63 00 7 6688 22 22 9 6798 00 06 22 CP21 U1 08 18 RX25 L1 00 11

4088 25 14 12 6662 25 00 8 6697 00 03 16 6798 00 07 22 CP21 U1 10 18 RX25 L3 00 11

4089 17 00 12 6662 25 17 8 6697 17 01 16 6798 00 08 22 CP21 U2 08 19 RX30 L1 00 17

4099 17 00 12 6662 40 00 8 6697 25 01 16 CA83 A1N02 20 CP21 U2 10 19 RX30 L3 00 17

4099 25 00 12 6662 40 17 8 6697 40 01 16 CA83 A1N03 20 CP21 U2 13 19 RX64 L1 63 11

4230 00 40 12 6662 40 25 8 6697 63 01 16 CA83 U1N02 18 EA58 00 14 21 RX64 L3 63 11

4299 03 01 12 6662 63 25 8 6698 00 03 15 CA83 U1N03 18 EA98 06 00 13 RX66 L3 L1 11

6602 17 00 6 6663 25 22 8 6698 01 01 14 CA83 U2N02 19 EA98 06 01 13 TA16 L1 04 4

6602 25 00 6 6663 40 22 8 6698 01 02 14 CA83 U2N03 19 EA98 06 02 13 TA16 L3 04 4

6602 40 00 6 6663 63 22 8 6698 02 01 14 CA84 A1N02 20 EA98 06 03 13 VR01 L1 00 12

6602 63 00 6 6663 63 28 8 6698 02 02 14 CA84 A1N03 20 EW01 00 02 15 VR01 L3 00 12

6604 17 00 6 6666 17 25 7 6698 03 01 14 CA84 U1N02 18 EW02 L1 00 15

6604 25 00 6 6666 25 40 7 6698 04 01 14 CA84 U1N03 18 EW02 L3 00 15

6604 40 00 6 6666 40 63 7 6698 04 02 14 CA84 U2N02 19 EW03 00 01 15

6604 63 00 6 6667 25 A1 8 6698 04 03 15 CA84 U2N03 19 EW04 00 01 13

6604 63 40 7 6667 25 U1 8 6698 05 03 15 CA94 U1 06 18 EW05 L1 00 17

6605 17 14 6 6667 25 U2 8 6698 11 11 21 CA94 U1 08 18 EW05 L3 00 17


Tr a n s a i r®

male connector

pilot kit

63 mm pipe

equal tee

equal pipe to pipe

remote controlshut off valve

reducing bracket

vented ball valve

ball valve

wall bracket

plug-in reducer

pipe mounting clip 16.5 mm pipe

pipe to pipe connector with vent


Tr a n s a i r®

This layout show many TRANSAIR® components,but is not a reproduction of an actual installation.

45º elbow

mini-bracket

reducing tee

end cap

bracket

equal elbow

automatic coupler

recoil tubing

mini valve

hose reel

40 mm pipe

modular cantileverbracket

onnector with vent


www.efficientpipe.com

www.transair.legris.com

7205 E. Hampton Ave.Mesa, AZ 85208

Tel: (480) 830-7764Fax: (480) 325-3571

CA010401GB


Documents

Transair®, advanced air pipe systems Product catalogASME B31.1, ASME B31.3, European standard 97/23 CEE - § 3.3 (equipment under pressure), and is registered with the Canadian TSSA