Total Installation Cost (TIC): CAD$ 16 Million 16” O.D SELECTED … · 2020. 5. 12. · SELECTED PIPELINE HIGHLIGHTS (ASME B31.4 AND B31.8) Location: Alberta (Canada) Project Description:

SELECTED PIPELINE HIGHLIGHTS

(ASME B31.4 AND B31.8)

Location: Alberta (Canada)

Project Description: ❑ 16” O.D

❑ 8 miles (~ 13km)

❑ Pipeline, HDD, lateral tie-ins

❑ Hot Tap by-Pass

Total Installation Cost (TIC): CAD$ 16 Million


❑ 10 miles (~ 16km)

❑ Pipeline and Lateral tie-ins

❑ Hot Tap by-Pass


Project Description: ❑ 12” O.D and 16” O.D

❑ Well Tie-in






❑ 10 miles (~ 16km)

❑ Pipeline, HDD, tie-ins

❑ Stress analysis



❑ Pipeline By-Pass

❑ Finite element (F.E) analysis

❑ Stress analysis


Project Description: ❑ Line Sizes 4” O.D to 8” O.D

❑ A/G facility piping

❑ F.E. analysis on vessel & pump nozzles





Project Description: ❑ Water and Product Pipeline

❑ 8” O.D and 10” O.D.

❑ Pipeline and storage

❑ 16 miles (~26km)


Project Description: ❑ 12” O.D. and 16” O.D. headers

❑ Steam injection Well Tie-Ins

❑ Stress analysis


KEY PROJECT EXPERIENCES

Location: Texas & New Mexico (US)

Project Type: Compressor Stations

Project Description:

FEED & Detailed Engineering • Templated design and engineering for four different

compressor stations in the Permian Basin, West Texas.• Fortress delivered on a very aggressive schedule.• Supported 3 separate contractors.• Facilities have capability for:

-three (3) compressor trains-three (3) TEG Glycol dehydration trains-60-70 MMSCF/D of pipeline spec. gas.

Total Installation Cost (TIC):

US$ 50 Million

Location: New Mexico (US)

Project Type: Central Distribution Point


FEED & Detailed Engineering • 200 MMscfd gas• 16,125 bpd condensate (NGL pipeline + condensate

from gas pipeline) • 104,000 bpd oil.


US$ 900 Million


Location: Texas & New Mexico (US)

Project Type: As-building / 3D model and design optimization


• IFI 3D Model & IFC Isometric drawings• 10,000 bbl/day throughput• Design updated to include VRU, purge gas and other

process and operability improvements


US$ 12 Million


Location: West Texas (US)

Project Type: Compressor Station


• Two train sour gas treating facility, 10% H2S, 7% CO2 • Design to include gas treatment & compression,

liquids separation, acid gas injection, VRU, and purge gas

• 50 MMSCF/day gas throughput• Pre-FEED complete


US$ 70 Million

Location: West Texas (US)

Project Type: H2S Treating Tower Addition


• Detailed Engineering Design, Procurement, H2S Treating Tower to produce sweet crude oil stream

• Treating up to 20,000 BBL/day of sour crude• 10% H2S Input, less than 10 ppm H2S output• Construction Management• Planning of larger start up and commissioning• Support for small capital projects


US$ 4 Million


Location: Texas (US)

Project Type: Well Tie-in


FEED and Detailed Engineering

• Increased capacity of the Well #11E Propylene storage

cavern dehydrating system

• Added second molecular sieve dehydrator skid with a

capacity of 2800 bbls per hour

• Increased the overall dehydrating capacity to a total

of 4000 bbls per hour.


US$ 20 Million

Project Type: Tie-in and Metering Upgrade


US$ 30 Million



Project Type: Rail & Truck Loading Terminal


FEED & Detailed Engineering - full EPCM scope. • Inlet Metering for 7 new pipelines from a new

refinery. • Truck Loading Terminal for blending and loading

diesel into trucks and offloading biodiesel from trucks into a storage tank.

• Rail Loading Terminal for blending and loading diesel into railcars and offloading biodiesel from railcars into a tank.

• Approximately 2 km of new pipe racks and piping.


CAD$ 220 Million

Saskatchewan, Canada - Light Oil Tank Storage Addition $50M

❑ 3 x 160,000 bbl tanks added to existing site

Concept Model

Completed Project


Location: Texas (US)

Project Type: Sour Gas Plant


FEED• Refrigeration/Amine/Acid Gas Injection/Water

Injection.


US$ 32 Million

Location: Pennsylvania (US)

Project Type: Truck Terminal


Detailed Engineering• Truck terminal to deliver propane and butane from

site spheres to trucks. • Bi-directional capability to deliver butane from trucks

to spheres.


US$ 12 Million


Client: Texas (US)

Project Type: Terminal Pipeline Connection


FEED• Pipeline connecting Terminal with Phillips 66 Terminal

and Total’s Port Arthur Refinery.• Transport blended Heavy Oil to the Phillips 66

Terminal and the NPS 10 and NPS 8 Total lines• Receive light oil and diluent from the Phillips 66

Terminal and NPS 8 and NPS 10 Total lines.


US$ 23 Million

Client: Canada & US

Project Type: Various multi-discipline plants expansion and maintenance programs


FEED and Detailed Engineering


CAD$ 70 Million

Bloom Bullet Study Relief System Upgrade

KEY PROJECT EXPERIENCES BY

FORTRESS PRINCIPALS

Location: Alberta (US)

Project Type: Mildred Lake UE-1 Upgrader


Detailed Engineering• Upgrader Expansion• Increase production of sweet synthetic crude by

98,000 barrels per day • Process simulation and the design of hydroprocessing

reactors


Mega Project

KEY PROJECT EXPERIENCES BY

FORTRESS PRINCIPALS

Location: Texas

Project Name: Meraux Refinery Expansion and Optimization


Detailed Engineering• HYSYS modelling• P&ID update• Rating checks on equipment benchmarking• Integrating Sulphur-in-Gasoline feed into existing

atmospheric distillation unit and FCCU • Revamped existing Hydrotreater and Hydrocracker


Mega Project


Location: Alberta

Project Type: Biogas Facilities / BioRefinery


FEED and Detailed Engineering• Anaerobic digestion of waste (cattle manure, sewage,

etc.) to produce biogas that would produce heat/power.

• Designed a Wheat Truck Offloading & Milling and Ethanol plant that would produce 2.5MW Power Generation and 40,000,000L Ethanol Production.


Confidential

ELECTRICAL INSTRUMENTATION

CONTROLPROJECT EXPERIENCE

Electrical, Instrumentation, & Controls Projects

Throne - MCC and control system upgrade

Stettler - MCC replacement project

Redwater -Electrical infrastructure upgrade

Redwater - Power upgrade of south quadrant

Kerrobert - Electrical and control system upgrade

Hardisty - Backup power generation

Hardisty - 5kV service upgrade

Langevin - MCC and RSView upgrade

Granum - 48OV MCC upgrade

Standard - 48OV MCC upgrade

Bloom - Electrical and control system upgrade

Various - Full pre-wired E-house design and pre-fabricated MCC buildings

TERMINAL PROJECT

HIGHLIGHTS

NWR TERMINALLING PROJECT ($170M)

Refinery terminal and blending project.

Our design scope included:

❑ Incoming pipelines from NWR.

❑ Custom blending facilities.

❑ Truck loading rack (North) - blended diesel.

❑ Rail car loading rack (South) - blended diesel and UCO.

❑ SCO cavern storage.

❑ Biodiesel rail car unloading (rail loading rack-South).

❑ Blend sample storage (at truck and rail rack areas).

❑New rail loading rack c/w railcar storage.

❑ 60,000 bbls/day rail & 30,000 bbls/day truck.

TERMINAL PROJECT

HIGHLIGHTS

KERROBERT TERMINAL - RAIL , TRUCK AND PIPELINE ($100M)

Unit Train terminal moving heavy and light products from pipeline into railcars using a new permanent above ground loading rack. Bitumen is trucked in from nearby oil sands facilities and pumped onto railcars.

❑ 70,000 bbl/day of crude by rail capacity.

❑ Rail loading facilities including 20 stations c/w loading arms and venting arms.

❑ Railcar Storage for approximately 250 inbound and outbound cars with additional storage for 60 railcars.

❑ Full Metering for Heavy Crude and Light crude from all Rail stations.

❑ 10 truck unloading bays c/w pumps.

❑ 16” pipeline connections.

❑ 3 x 80,000 BBL crude storage tanks, c/w small tank storage for blending.

❑ Process Skids, Pump skids & Metering skids.

TERMINAL PROJECT

HIGHLIGHTS

CHEECHAM - RAIL , TRUCK AND PIPELINE TERMINAL ($110M)

❑ 50,000 bbl/day crude /condensate by rail capacity.

❑ Rail facilities for offloading propane, butane, or condensate and loading of crude oil.

❑ Flare System for rail car push gas.

❑ Product storage for condensate, diluted bitumen (Dilbit) complete with floating roofs and NGL bullets for propane and butane.

❑ Pipelines and transfer pumps for transporting condensate and Dilbit.

❑ Truck handling facilities for 20 truck stations handling propane, condensate and Dilbit.

❑Highly modernized and automated with a full PLC control system installed complete with an integrated truck/rail terminalling system and OMNI Flow Computer systems.

❑ Full custody transfer metering with integration back to accounting group in Calgary.

Documents

Total Installation Cost (TIC): CAD$ 16 Million 16” O.D SELECTED … · 2020. 5. 12. · SELECTED PIPELINE HIGHLIGHTS (ASME B31.4 AND B31.8) Location: Alberta (Canada) Project Description: