Company profile

Tecnopera is a company specializing in three main areas:• Piping, bolts and studs• Grating and gates• Metal Structures

With thirty years of experience and presence in Europe and the Middle East, Tecnopera points to the leadership in the Euro-Mediterranean market.

The values on which Tecnopera has chosen to base its activities are product safety, professionalism of its team and full satisfaction of the customers.

They chose Tecnopera: Port of Livorno, Auchan Shopping Center in Siracusa, Shopping mall “Centro Sicilia”, Shopping mall “Ciclope” in Acireale, Catania Calcio (Torre del Grifo sporting center), San Filippo Stadium in Messina, Municipal Stadium of Scordia, Subway of Catania, University of Catania, Umberto I Hospital of Catania, Posco Plantec South Korea (photovoltaic area in Melilli and Augusta), HT Construction (solar greenhouses in Modica and Santa Croce Camerina), Versalis Polymers Europe, Eni Group, Erg Power, Isab, Esso Petroil, Lukoil, RAM Raffineria Mediterranea, Gasco, Saipem, Gupco Suez Petroleum, Petrojet.

Tecnopera’s valve division is a reliable business unit specializing in a full range of industrial valves.Specific project requirements can be met trough a structured supply chain of well known manufacturers. Hence we can satisfy all client requests in a short period of time, by building competitive packages of either a wide range of valves or meeting single requests. Forged and casted, actuated and motor operated.

BALL VALVESTrunnion, Floating, Side Entry, Top Entry, Fully Welded, Soft & Metal Seated, Rising Stem, DBB, Trunnion 3 way L-T, Cryogenic, SubSea• Materials: Carbon, Stainless Steel, Low

Temperature, Special Alloys: Monel, Hastelloy, Incoloy and Duplex SS.

• Sizes: 1/2” – 60”CHECK VALVESWafer, Dual Plate, Axial Non Slam , Tilting check, Nozzle check, Stop check.• Materials: Carbon, Stainless Steel, Alu-Bronze,

Cast Iron, Alloy Steel, Special Alloys.• Sizes: 2” – 60”GATE, GLOBE VALVESBolted Bonnet, Pressure Seal, Bellows Sealed, Through Conduit, Cryogenic, Y Pattern.• Materials: Carbon, Stainless, Duplex and Alloy

Steels, Low Temperature, Special Alloys.• Sizes: 1/2” – 60”BUTTERFLY VALVES (manual and pneumatic)Wafer, Lug, Flanged, Soft & Metal Seated, Triple Offset.• Materials: Carbon, Stainless Steel, Alu-Bronze,

Cast Iron, Ductile iron, Alloy Steel, Special Alloys.• Sizes: 2” – 60”

DIAPHGRAM VALVESManual, pneumatic, Weir Type, Staight Type, single/double Aluminum cylinder.• Materials: Cast iron unlined and Ebonite lined,

Diaphragm in Neoprene-Butyl, Hypalon –Nitrile, Silicon Rubber, PTFE, Viton.

• Sizes: 1/2” – 14”PINCH VALVESManual pinch valve, pinch with single/double Aluminum cylinder fitted with Pneumatic Operation• Materials: Cast iron, Aluminum; Sleeve in natural

rubber, EPDM, Neoprene-Butyl, Neoprene Silicon Rubber, Hypalon, Viton.

• Sizes: 3/8” – 14”OTHER PRODUCTS• Control valves.• Safety/Relief valves.• Strainers.• Steam traps.• Dedicated valve’s pups.

Valves

Flanges

WELD NECK / BLIND / SOCKET WELD / THREADED/ SLIP ON / LAP JOINTDimensions:• ANSI B16.5 / ANSI B16.47 – MSS SP44 – API –

AWWA• ANSI B16.35 – API 590 / ANSI B16.48 and ON

DRAWINGCarbon Steel:• ASTM A105 – ASTM A350 LF2• ASTM A694 F42 – F52 – F60 – F65 – F70Alloy Steel:• ASTM A182 F1 – F11 – F12 – F22 – F5 – F9 – F91

Stainless Steel:• ASTM A182 F304 / 304L / 304H• ASTM A182 F321 / 321H• ASTM A182 F347 / 347H• ASTM A182 F316 / 316L / 316HSpecial Steel:• Duplex, Super Duplex, Inconel, Incoloy, Monel,

Hastelloy, Titanium.

SPECIAL FLANGES• COMPACT FLANGES• ANCHOR FLANGES• ADAPTOR FLANGES• SWIVEL FLANGES• SPECTACLE BLIND• ORIFICE FLANGES• DRIP RING

Spiral Wound – Flat – Oval – Octagonal ring joint – Metal Jacketed ANCHOR BOLTS “U” BOLTSDimensions:• ANSI B16.20Carbon Steel:• Rubber, PTFE, ceramic, lead, bronze, copper, aluminium, carbon steel, soft iron, titanium, austenitic grades for

urea, special steels, nickel, monel, etc.• Raw or rust preventive, hot galvanized, coated with Teflon.

Gaskets

Dimensions: ANSI B16.5 / ANSI B18.22Steel: B7, B7M, L7, L7M, B16, B8, B8M, B8C, B8T, B5, B6, GR660External Coating: Electrolitic Galvanized (UNI ISO 2081/89), Hot Deap Galvanized (UNI EN ISO 1461)

Stud Bolts

Dimensions: 4.6 - 8.8 - 10.9 - 12.9 - B7- AISI 304 - AISI 316Type: UNI 5737 DIN 931 - UNI 5739 DIN 933Extrenal coating: Electrolitic galvanized (UNI ISO 2081/89) Hot deap galvanized (UNI EN ISO 1461)Range: M10 to M52

Bolts

Dimensions: ANSI B16.11 / MSS SP97Carbon Steel: ASTM A105 – ASTM A350 LF2 / ASTM A694 F42 – F52 – F60 – F65 – F70Alloy Steel: ASTM A182 – F1 – F11 – F12 – F22 – F5 – F9 – F91Stainless Steel:• ASTM A182 F304/304L/304H – ASTM A182 F321 / 321H• ASTM A182 F347/347H• ASTM A182 F316/316L/316H – A182 F310SSpecial Steel: Duplex, Super Duplex, Inconel, Incoloy, Monel, Hastelloy, Titanium.

ELBOWS, TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS, STUB ENDS, BARRED TEES, LATERAL TEES, FLOW TEES, BENDS LARGE RADIUS (3D/5D/7D/10 and SPECIAL RADIUS)Dimensions:• ANSI B16.9/ MSS SP75/ EN standard and ON DRAWING• ASME B31.3 / B31.4 / B31.8• ANSI B16.49/ MSS SP97 / ANSI B16.11Carbon Steel: ASTM A234 WPB – ASTM A234 WPC / ASTM A420 WPL6 – MSS SP75 WPHY42 to 70 ASTM A860 WPHY42 to 70Alloy Steel: ASTM A234 WP1 – WP11 – WP12 – WP22 – WP5 – WP9 – WP91 – WP92Stainless Steel:• ASTM A403 WP304/304L/304H – ASTM A403 WP321 / 321H – ASTM A403 WP347/347H• ASTM A403 WP316/316L/316H – ASTM A403 WP310SSpecial Steel: Duplex, Super Duplex, Inconel, Incoloy, Monel, Hastelloy, Titanium.

Fittings Bw Socket WeldThreaded

Forged FittingsSochet WeldThreaded

Pipes, fittings, flanges and valves in all grades of carbon and stainless steel, are manufactured to withstand pressure, temperature, corrosion and climatic project technical data, with the most stringent requirements of ASME, EN, PED. Additional testing to ensure compliance to our customer’s specs, is carried out by certified laboratories and inspected by accredited third parties.

SEAMLESS / WELDED LSAW / EFW / ERWDimensions: • API 5L / ANSI B36.10 / ANSI B36.19Carbon Steel:• API 5L GR.B / X42 / X52 / X60 / X65 / X70• ASTM A106 GR.B / GR.C• ASTM A106 GR.B / GR.C• ASTM A671• ASTM A672• ASTM A53Alloy Steel:• ASTM A335 P1 – P11 – P12 – P22 – P5 – P9 – P91 – P92Stainless Steel:• ASTM A312 TP304 / 304L / 304H• ASTM A312 TP321 / 321H• ASTM A312 TP347 / 347H• ASTM A312 TP316 / 316L / 316HSpecial Steel:• Duplex, Super Duplex, Inconel, Incoloy, Monel, Hastelloy, Titanium.

Pipes

Plates, Angles, Round, NP, IPE, UPN, HEA, HEB, Tubulars.Carbon Steel: S235JR/JO, S275JR/JO, S355 JR/JO, FE510Stainless Steel: AISI 304, AISI 316, AISI 316 L

Plates

MetalProfiles

Carbon Steel: S235JR, S275JR, S355 JR, FE510Stainless Steel: A240, A204, AISI 304, AISI 316, AISI 321, AISI 410

All products are raw steel or galvanized in accordance with the UNI EN ISO and the rules imposed by the European Union. On request, can be colored according to RAL color, with thermoset powder coatings that ensure durability.Materials: S235JR, S275JRExternal Coating: Electrolitic Galvanized (UNI ISO 2081/89), Hot Deap Galvanized (UNI EN ISO 1461)

Grating

Tecnopera manufactures, sells and installs metal structures for photovoltaic systems.The company is able to offer complete solutions “turnkey” and satisfy even the most complex requirements, carrying out projects provided by the client or developed by the design office. The workshop proper, the specialized personnel and thirty years of experience guarantee excellent results and rapid implementation times.

Photovoltaic

www . t e c n o p e r a . c om