THERMAL INSULATION PANELSnew.panouripolar.ro/catalog/catalog_Romconstruct_Polar... · 2020. 11. 26. · Panouri Termoizolante de Perete - simpla rezemare Sarcina uniform distribuita

THERMAL INSULATION PANELS

1

Table of Contents

Production process and materials used ..................................................................................................................... 4

Load evaluation methodology .............................................................................................................................................. 4

Types of profiling of the metal surfaces ..................................................................................................................... 5

Wall panels with visible fastening ...................................................................................................................................... 6

Wall panels with concealed fastening - polyurethane core .................................................................... 8

Wall panels with concealed fastening - fire-resistant ................................................................................10

Roof panels 3 folds .........................................................................................................................................................................12

Roof panels 5 folds .........................................................................................................................................................................14

Wall panels with visible fastening and mineral wool core .......................................................................16

Wall panels with concealed fastening and mineral wool core ...........................................................18

Roof panel with 5 folds and mineral wool core .................................................................................................20

ISO-TILE roof panels ......................................................................................................................................................................22

Cold related panels .......................................................................................................................................................................23

Types of material used to build the inner face of the roof panels ................................................ 24

Self-drilling screws ........................................................................................................................................................................25

Sealing gaskets .................................................................................................................................................................................25

Roof skylights ......................................................................................................................................................................................26

Sectional and fire-resistant metal doors ................................................................................................................26

Roof and wall joint masking accessories ................................................................................................................. 27

Sanitarian profiles .......................................................................................................................................................................... 27

Packaging • transport • handling • storage ............................................................................................................28

2

POLAR THERMAL-INSULATING PANELS – A company with extensive experience in the field of professional soluti-ons for constructions and construction materials related to industrial and residential projects, whose object of activity is the production of polar insulating panels for roof and walls, including the manufacture of finishing accessories, skylights, sectional or fire-resistant metal doors.

We support your comfort and quality needs with polar insu-lating panel systems for the walls and roof, in a wide range of types and sizes, intended for commercial, residential, in-dustrial and agro-zootechnical constructions.

Complementary to the exceptional quality of the polyure-thane panels and the complete range of products, the te-chnical team offers you professional solutions materialized through the following SERVICES:

› Specialized technical consultancy on-site in order to train the panel assembly teams;

› Technical support for the calculation of the resistance of the panels and the choice of the optimal solution to support them;

› Preparation of the necessary panels - paneling for the streamlining of losses;

› Customized technical solutions regarding the installation of panels in structural systems adapted to the needs of the beneficiary;

› The possibility of cutting (pre-cutting) the panels directly in the factory in order to mount them by overlapping (cutting the lower sheet and the foam core and applying a strip in order to easily remove the polyurethane foam core).

OUR VALUES IN NUMBERS AND TECHNICAL DATA: › Production halls with overhead cranes, located in Buzau county, with a built area of approximately 25,000 sqm;

› Total land area 120,000 sqm;

› Certifications ISO 9001: 2008, SR EN 1090 - 2 EX C3, ISO 3834 - Part 2

› Fully automated production line, put in use at the end of 2015, which utilizes an innovative technology aligned with the latest developments in the field;

› Production capacity of approximately 2,500,000 sqm pa-nels/year;

› Staff of 165 employees.

PRINCIPLES AND STRENGTHS: › We offer high quality, durable technical solutions;

› Promptness and professionalism;

› Short delivery terms;

› Our own design, static calculation and 3D detailing office uses the most advanced software solutions in the field such as: Robot Structural Analysis Professional, ETABS 2013, Arhicad, Tekla Structures 18.1.

THE COMPANY'S MISSION: › To understand the client's needs in order to offer them professional and personalized technical isolation soluti-ons, making available the know-how in the field;

› Development orientation in the direction of simplifying the assembly process;

› POLAR PANEL thermal insulating systems shall become an emblem of quality;

› We shall stand out on the market of Romanian producers of construction materials with the most competitive pri-ces, implementing the idea that: "The Romanian product represents a symbol of quality, at advantageous prices".

The partner you’re looking for!

3

1720

760

200130 100 90 80

50

GUARANTEE OF THE PRODUCTS AND THE CE MARKINGThe guarantee of POLAR THERMAL INSULATING PANEL products is given by their production in accordance with the harmonized Eu-ropean standard SR EN 14509: 2013, with the updated ISO 9001 certificati-on for "Manufacture of self-supporting sandwich panels" and, last but not least, by obtaining the right to trade in CE marked panels, a symbol whi-

ch certifies that they comply with the legal requirements regarding the safety of construction products.

SUSTAINABILITY – DURABILITYSustainability today means the future of the generations to come. With our polar insulating panel solutions, you can

reduce energy costs by up to 40 percent as compared to a traditional solution.

DIVERSE DESIGNWith a wide range of metal surface profiles and the pos-sibility to make various combinations between them, we offer your project the best possible design, and the ideas become reality.

EASE OF MOUNTINGWe implement an innovative system of conforming the mechanical fastening between the panels that offers to the assembly process high precision, but also a special ar-chitectural design. Also, the high degree of industrialization (prefabrication) ensures to the assembly process precision, simplicity and speed.

FIRE PROTECTIONThe PIR polyisocyanurate panels provide fire resistance EI15 and EI30 for wall panels, and for the roof panels REI15 and REI30, also the fire reaction class is B-s2, d0.

Mineral wool core panels provide for the wall panels a fi-re-resistance of EI60, EI120 and EI180, and for the roof pa-nels a REI30 and REI60 one, and also the fire reaction class is A2-s1, d0.

ConcreteBrickWoodFibre BoardCorkMineral WoolPolystyrenePolyurethane

Thermal conductivity of Polyurethane as compared to other materials

Polyester paint 25 μmPrimer - foamable rough coatPassivated zinc layerSteel sheet metal S220GD, S250GD, S280GG, S320GDPassivated rough coat layerPrimer – foamable rough coat

4

The production line is designed and built in accordance with the latest technologies in the field, being defined by a high produc-tion capacity and a continuous and fully automated production process.

The high quality of the manufacturing materials together with the modern production technology, ensure for the polar insulating panels a high class of physical and mechanical properties which, therefore, have a wide range of applications.

The main advantages of using polar insulating panels:

› Innovative design of the mechanical system for fastening be-tween two panels;

› Applicability on any type of structural system;

› Possibility of reuse and repartitioning;

› Larger usable construction area compared to other enclosure systems;

› Thermal and acoustic insulation, fire protection;

› High degree of industrialization - prefabrication of constructions.

The main compound of the polar insulating panels is POLYURETHA-NE, a rigid, insulating foam, the result of the chemical mixing reac-tion of polyol and isocyanate and various additives and catalysts. Depending on the reaction time of the material, it is ready to use in a few minutes.

The main characteristics of this compound:

› Excellent thermal insulation;

› Good compressive strength and dimensional stability when used in environments with low or high temperatures;

› Material with high impermeability;

› It is a light material;

› High structural resistance and intrinsic adhesion to metals;

POLYISOCYANURATE comes with the advantages of the already known Polyurethane - a light material with extremely low weight, high structural resistance, intrinsic adhesion to metals and excellent thermal insulation properties. In addition, the cyclic annular structu-re of the polyisocyanurate gives it greater thermal stability, resulting in improved performances of both reaction to fire and protection.

Due to the metal surfaces formed by two support layers of qua-lity sheet metal S220GD + Z + 140, or S250GD + Z + 140, hot-dip galvanized and pre-painted, the sandwich panels are completely waterproof. The remarkable quality of thermal insulation is mainly generated by the properties of the rigid Polyurethane foam, which has the lowest coefficient of thermal conductivity of all common-ly used materials (brick, AAC, wood, mineral wool core, Polystyre-ne). Rigid polyisocyanurate foam is characterized by equally good thermal insulation properties, but in terms of the fire resistance indicators, they are significantly improved.

Methodology for load evaluationThe calculation methodology for the polar insulating panels of sandwich-type implies the taking into account of some aspects such as: permanent loads, snow, wind. After that, two additional loads are of major importance in assessing the load-bearing ca-pacity of the panels: the stresses resulting from the temperature differences between the two sides of the panel and the extrusion of the insulation layer due to tangential stresses in it (developed especially in synthetic materials).

Taking into account the excellent thermal insulation properties of the Polyurethane foam, thermal radiation - the effect of the sun rays occurs on only one side of the panel, which leads to a significant temperature difference between the surface exposed to radiation and the one which is not exposed. The high thermal conductivity, but also the coefficient of thermal expansion - both specific to metals - determine the appearance of significant in-

ternal stresses at the level of the sandwich-type cross section and can also cause deformations of the panel.

Unlike metals, synthetic materials have a different behavior un-der the effect of a constant load. Initially, transverse deformations give rise to elastic reactions. If the loading remains constant, the purely elastic deformations shrink continuously due to the defor-mation of the polymer.

Since polar insulating panels are composite elements, Bernoulli's hypothesis regarding the flatness of the cross section following the appearance of a deformation is no longer valid. Deformation and stresses in the insulation layer must be taken into account. Calculations that take into consideration a "rigid connection" be-tween the components of the sandwich panel will theoretically lead to an overestimation of the load-bearing capacity of the pa-nels and thus to their incorrect sizing.

The production process and the utilized materials

5

RAL 5010RAL 3009RAL 3000RAL 1015 RAL 9006RAL 6011 RAL 6021 RAL 9007RAL 9002RAL 8017RAL 8004RAL 7016

Types of profiling of the metal surfaces

« STANDARDCross-section with symmetrical ribs that offers an interesting aesthetic result.

MICRO-RIBBED » The finely ribbed cross-section fulfills high aesthetic demands.

MICRO-COFFERED »

LIS »Flat cross-section, without ribs, offers a simple and elegant design.

« COFFERED

6

1.000 mm

D40 50 60 80 100 120 150 180

Wall panels with visible fastening PUR thermal insulation/PIR fire-resistant thermal insulation

The panels are suitable for use on any type of construction that requires good insulation, quick installation and, last but not least, an aesthe-tic appearance. They are suitable for facades of industrial and office buildings, production halls, warehouses, gyms, hypermarkets, business centers, garages, gas stations.

Characteristics of the product: › Maximum standard length: 13.5 m, up to a maximum of 15 m, but excep-

tionally panels up to a length of 17 m can be delivered;

› Polar insulating panel core: Polyurethane foam PUR / Polyisocyanurate foam PIR;

› Pre-painted galvanized steel metal sheet - 25 μm thick polyester paint, with various micro profiles, coated with protective foil on both sides.

› The mechanical fastening between the panels offers high precision to the assembly process, whereas the sealing gasket helps to ensure the thermal insulation and the sealing of the joint;

› Prefabricated element that helps to industrialize the execution process in the field of constructions.

Thicknesses availa-ble for production:

Detail - PPPV without screw Detail - PPPV with screw Sizing tolerances according to SR EN 14509:2013:Length < 3000 mm ± 5 mm

Length > 3000 mm ± 10 mm

Deviation from perpendicularity 6 mm

Usable width ± 2 mm

Thickness (D) < 100 mm ± 2 mm

Thickness (D) > 100 mm ± 2%

Thermal propertiesThickness of the panel R • Thermal resistance U • Transmittance

40 mm 2.00 0.50

50 mm 2.50 0.40

60 mm 2.94 0.34

80 mm 3.85 0.26

100 mm 4.76 0.21

120 mm 5.88 0.17

150 mm 7.14 0.14

180 mm 9.09 0.11

7

Panouri Termoizolante de Perete - simpla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300

Distanta intre reazeme - L [m]

1,5 2,4 3,2 4,1 4,9 5,8 6,6 7,5 8,3 9,2 10,0

PPPV 40mm

PPPV 50mm

PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 180mm

Panouri Termoizolante de Perete - dubla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300

Distanta intre reazeme - L [m]1,5 2,3 3,1 3,9 4,7 5,5 6,3 7,2 8,0 8,8 9,6 10,4 11,2 12,0

PPPV 40mm

PPPV 50mm

PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 180mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,4 3,2 4,1 4,9 5,8 6,6 7,5 8,3 9,2 10,0

PPPV 40mm

PPPV 50mm

PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 180mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPV 40mm

PPPV 50mm

PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 180mm

Load uniformly

distributed q [daN/m2]

Distance between supports

[m]

40 50 60 80 100 120 150 180 40 50 60 80 100 120 150 180

60 L= 3,1 3,65 4,2 5,15 6 6,8 7,95 9,05 4,05 4,8 5,45 6,7 7,9 8,95 10,45 11,9

80 L= 2,8 3,3 3,75 4,6 5,4 6,15 7,2 8,15 3,6 4,25 4,9 6 7 8 9,4 10,7

100 L= 2,55 3,05 3,45 4,25 5 5,65 6,6 7,5 3,3 3,9 4,45 5,5 6,45 7,4 8,65 9,8

120 L= 2,4 2,8 3,25 3,95 4,65 5,3 6,2 7,05 3,05 3,6 4,1 5,1 6 6,85 8,05 9,1

140 L= 2,25 2,65 3,05 3,75 4,4 5 5,85 6,65 2,85 3,4 3,9 4,8 5,65 6,45 7,55 8,6

160 L= 2,15 2,5 2,9 3,55 4,15 4,75 5,55 6,3 2,7 3,2 3,65 4,5 5,35 6,1 7,15 8,15

180 L= 2,05 2,4 2,75 3,4 4 4,55 5,3 6,05 2,5 3 3,45 4,3 5,05 5,8 6,8 7,8

200 L= 1,95 2,3 2,65 3,25 3,8 4,35 5,1 5,8 2,4 2,9 3,3 4,1 4,85 5,55 6,55 7,45

220 L= 1,85 2,2 2,55 3,15 3,7 4,2 4,9 5,6 2,3 2,75 3,15 3,9 4,65 5,35 6,3 7,15

240 L= 1,75 2,1 2,45 3 3,55 4,05 4,75 5,4 2,2 2,65 3,05 3,85 4,45 5,15 6,05 6,85

250 L= 1,7 2,05 2,35 2,95 3,5 3,9 4,6 5,25 2,15 2,55 2,95 3,8 4,35 4,95 5,85 6,7

*) The table shows the maximum permissible distances, in meters, between two consecutive supports, corresponding to each uniformly distributed load, for the wall panels. The results were obtained following tests performed in accredited laboratories, in accordance with SR EN 14509, Annex A, Annex B, Annex C, for panels with outer and inner steel surfaces that are 0.5mm thick.**) Verification of test results was performed according to SR EN 14509, Annex E.***) The numerical value of the evenly distributed loads - q, represents the calculation value of the effects of the actions (Sd) and must be determined by grouping the values of the actions that are considered to appear simultaneously. The action groups are in accordance with SR EN 1990, chap. 6.4 and chap. 6.5.

(1) the design value at the final limit state (S.L.U.);(2) design value in service limit state (S.L.S.) - characteristic grouping (usually used for irreversi-ble limit states);(3) the design value in the service limit state (S.L.S.) – frequent grouping (used for deflections);„+” – means "in grouping with";„Σ” – means "grouped effect of".

The following characteristics are added to the PIR fire resistant thermal insulation: › Fire resistance - the ability of the prefabricated element to limit the spreading of

flames for a certain period of time. The fire certification of the panels is defined by the following characteristics:

(R) – Bearing capacity (E) – Sealing upon dissemintaion (I) – Thermal insulation › Polar thermal insulating Wall Panels with visible fastening and Thickness 50mm – EI 20’ › Polar thermal insulating Wall Panels with visible fastening and Thickness 60mm – EI 20’ › Polar thermal insulating Wall Panels with visible fastening and Thickness 80mm – EI 30’ › Polar thermal insulating Wall Panels with visible fastening and Thickness 100mm – EI 30’ › Polar thermal insulating Wall Panels with visible fastening and Thickness 120mm – EI 30’

› The panels are certified according to the classification reports: CR-79-01 / 06.06.2016 and CR-79-02 / 06.06.2016 for compliance with BDS EN 13501-2: 2007 + A1: 2009

› Reaction to fire - the ability of the prefabricated composite element to withstand combustion.

› Depending on the reaction to fire, the panels have been classified as follows:

Behaviour in fire Smoke dissemination Condensation

B - s 2 , d 0 › Panourile sunt certificate conform raportului 1871—CPR-RtF-156 pentru confor-

marea cu norma EN 13501-1:2007+A1:2009

Polar insulating wall panels – simple supporting

Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]

Distance between the supports - L [m] Distance between the supports - L [m]

Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]

Polar insulating wall panels – double supporting

8

1.000 mm

D6050 80 100 120

Wall panels with concealed fasteningPolyurethaneic core

The panels are suitable for use for any type of construction that requi-res good insulation, quick installation and last but not least an aesthe-tic appearance. They are suitable for facades of industrial and office buildings, production halls, warehouses, gyms, hypermarkets, business centers, garages, gas stations. The specially configured double channel joint system provides superior mechanical strength and thermal insula-tion to any other similar wall panel product.



› Polar insulating panel core: PUR Polyurethane Foam;

› Pre-painted galvanized steel metal sheet - 25 μm thick polyester paint, with various micro profiles, protected with protective foil on both sides.

› The mechanical fastening between the panels offers high precision the assembly process, whereas the sealing gasket helps to ensure the ther-mal insulation and the sealing of the joint;


Sizing tolerances according to SR EN 14509:2013:LENGTH < 3000 mm ± 5 mm

LENGTH > 3000 mm ± 10 mm


USABLE WIDTH ± 2 mm

THICKNESS (D) < 100 mm ± 2 mm

THICKNESS (D) > 100 mm ± 2%

Thicnesses availa-ble for production:

Detail - PPPA without screw Detail - PPPA with screw

9


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300

Distanta intre reazeme - L [m]1,5 2,1 2,6 3,2 3,7 4,3 4,8 5,4 5,9 6,5 7,0

PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,1 2,7 3,2 3,8 4,4 5,0 5,5 6,1 6,7 7,3 7,8 8,4 9,0

PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,1 2,7 3,2 3,8 4,4 5,0 5,5 6,1 6,7 7,3 7,8 8,4 9,0

PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm

Load uniformly



[m]

50 60 80 100 120 50 60 80 100 120

60 L= 3,65 4,2 5,15 6 6,8 4,8 5,45 6,7 7,9 8,95

80 L= 3,3 3,75 4,6 5,4 6,15 4,25 4,9 6 7 8

100 L= 3,05 3,45 4,25 5 5,65 3,9 4,45 5,5 6,45 7,4

120 L= 2,8 3,25 3,95 4,65 5,3 3,6 4,1 5,1 6 6,85

140 L= 2,65 3,05 3,75 4,4 5 3,4 3,9 4,8 5,65 6,45

160 L= 2,5 2,9 3,55 4,15 4,75 3,2 3,65 4,5 5,35 6,1

180 L= 2,4 2,75 3,4 4 4,55 3 3,45 4,3 5,05 5,8

200 L= 2,3 2,65 3,25 3,8 4,35 2,9 3,3 4,1 4,85 5,55

220 L= 2,2 2,55 3,15 3,7 4,2 2,75 3,15 3,9 4,65 5,35

240 L= 2,1 2,45 3 3,55 4,05 2,65 3,05 3,85 4,45 5,15

250 L= 2,05 2,35 2,95 3,5 3,9 2,55 2,95 3,8 4,35 4,95




Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


10

1.000 mm

D

6050 80 100 120

Wall panels with concealed fastening

The pane-ls are suita-ble for use on any type of constructions that require good insulati-on, quick installation and last but not least a high degree of fire resistance. They are suitable for faca-des of industrial and office buildings, pro-duction halls, warehouses, gyms, hypermarkets, business centers, garages, gas stations. The speci-ally configured double-channel joint system provides superior mechanical strength and thermal insulation to any other similar wall panel product.



› Polar insulating panel core: PIR polyisocyanurate foam;

› Pre-painted galvanized steel metal sheet - 25 μm thick polyester paint, with various micro profiles, protected with protective foil on both sides.



› Fire resistance - the ability of the prefabricated element to limit the spreading of flames for a certain period of time. The fire certification of the panels is defined by the following characteristics:

(R) – Bearing capacity (E) – Sealing upon dissemination of fumes and gases

(I) – Thermal insulation

› Polar thermal insulating wall panel with concealed fastening and thic-kness of 50mm – EI 20’











fire resistant

› The panels are certified according to the classification reports: CR-79-01 / 06.06.2016 and CR-79-02 / 06.06.2016 for compliance with BDS EN 13501-2: 2007 + A1: 2009

› Reaction to fire - the ability of the prefabricated composite element to withstand combustion.

› For the reaction to fire, the panels have been classified as follows:

Behaviour with fire Smoke dissemination Condensation

B - s 2 , d 0

› The panels are certified according to the report 1871 — CPR-RtF-156 for compliance with the standard EN 13501-1: 2007 + A1: 2009


Detail - PPPA with screw

11


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,1 2,7 3,2 3,8 4,4 5,0 5,5 6,1 6,7 7,3 7,8 8,4 9,0

PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,1 2,7 3,2 3,8 4,4 5,0 5,5 6,1 6,7 7,3 7,8 8,4 9,0

PPPA 50mm

PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm

Load uniformly



[m]

50 60 80 100 120 50 60 80 100 120

60 L= 3,65 4,2 5,15 6 6,8 4,8 5,45 6,7 7,9 8,95

80 L= 3,3 3,75 4,6 5,4 6,15 4,25 4,9 6 7 8

100 L= 3,05 3,45 4,25 5 5,65 3,9 4,45 5,5 6,45 7,4

120 L= 2,8 3,25 3,95 4,65 5,3 3,6 4,1 5,1 6 6,85

140 L= 2,65 3,05 3,75 4,4 5 3,4 3,9 4,8 5,65 6,45

160 L= 2,5 2,9 3,55 4,15 4,75 3,2 3,65 4,5 5,35 6,1

180 L= 2,4 2,75 3,4 4 4,55 3 3,45 4,3 5,05 5,8

200 L= 2,3 2,65 3,25 3,8 4,35 2,9 3,3 4,1 4,85 5,55

220 L= 2,2 2,55 3,15 3,7 4,2 2,75 3,15 3,9 4,65 5,35

240 L= 2,1 2,45 3 3,55 4,05 2,65 3,05 3,85 4,45 5,15

250 L= 2,05 2,35 2,95 3,5 3,9 2,55 2,95 3,8 4,35 4,95




Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


12

1.000 mm

D30 40 50 60 80 100

Roof panels 3 folds

The panels are suitable for use on any type of construction that requires good insulation, quick installation and last but not least an aesthetic appearance. They are suitable for roofs with a minimum slope of 7%.

Characteristics of the product: › Maximum standard length: 13.5m, up to a maximum of 15m, but excep-

tionally, panels up to a length of 17m can be delivered;

› Polar insulating panel core: PUR Polyurethane foam;

› Pre-painted galvanized steel metal sheet - 25 μm thick polyester paint, protected with protective foil on both sides. The inner face of the panel can also be made of the following materials: hundred-decimal alumi-num, bituminous cardboard, paper, with fiberglass (ZOO);

› The mechanical fastening between the panels offers high precision to the assembly process, and also the sealing gasket helps to ensure the thermal insulation and the sealing of the joint;

› Prefabricated element that helps to industrialize the execution process in the field of constructions;

› Panel notching - cutting of the lower sheet and of the Polyurethane foam core in order to overlap the panels can be done directly at the factory.








Detail – without screw Detail – with screw

13

Load uniformly



[m]

30 40 50 60 80 100 30 40 50 60 80 100

60 L= 3,4 3,85 4,35 4,85 5,75 6,65 3,95 4,45 5,05 5,65 6,6 7,6

80 L= 3,05 3,45 3,9 4,3 5,15 5,95 3,55 4 4,5 5 5,9 6,8

100 L= 2,8 3,15 3,55 3,95 4,7 5,45 3,25 3,65 4,15 4,55 5,35 6,2

120 L= 2,6 2,95 3,3 3,65 4,35 5,05 3 3,4 3,8 4,25 4,95 5,75

140 L= 2,45 2,75 3,1 3,45 4,1 4,75 2,85 3,2 3,6 4 4,65 5,4

160 L= 2,35 2,6 2,95 3,25 3,85 4,45 2,75 3,05 3,4 3,75 4,4 5,05

180 L= 2,25 2,5 2,8 3,1 3,65 4,25 2,65 2,95 3,3 3,6 4,1 4,75

200 L= 2,15 2,4 2,65 2,95 3,5 4,05 2,55 2,85 3,15 3,45 3,9 4,55

220 L= 2,05 2,3 2,55 2,85 3,35 3,9 2,45 2,75 3,05 3,35 3,75 4,35

240 L= 2 2,25 2,45 2,75 3,25 3,75 2,4 2,7 2,9 3,2 3,65 4,2

250 L= 1,95 2,2 2,4 2,7 3,2 3,65 2,35 2,65 2,85 3,15 3,6 4,1




Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


14

1.000 mm

D

30 40 50 60 80 100 120 150

The panels are suitable for use on any type of construction that requires good insulation, quick installation and last but not least an aesthetic appearance. They are suitable for roofs with a minimum slope of 7%.

Characteristics of the product: › Maximum standard LENGTH: 13.5m, up to a maximum of 15m, but excep-

tionally panels up to a LENGTH of 17m can be delivered;

› Polar insulating panel core: PUR Polyurethane Foam / PIR Polyisocya-nurate Foam;

› Pre-painted galvanized steel metal sheet - 25 μm THICKNESS polyester paint, protected with protective foil on both sides. The inner face of the panel can also be made of the following materials: hundred-decimal aluminum, bituminous cardboard, paper;



› Panel notching - cutting of the lower sheet and the Polyurethane foam core, in order to overlap the panels, can be done directly in the factory.

Roof panels 5 folds









PUR thermal insulation/PIR fire-resistant thermal insulation

15

Panouri Termoizolante de Acoperis - simpla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,3 3,0 3,8 4,6 5,4 6,1 6,9 7,7 8,5 9,2 10,0

PA5C 30mm

PA5C 40mm

PA5C 50mm

PA5C 60mm

PA5C 80mm

PA5C 100mm

PA5C 120mm

PA5C 150mm

Panouri Termoizolante de Acoperis - dubla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

20

40

60

80

100

120

140

160

180

200

220

240

260


1,50 2,46 3,42 4,38 5,35 6,31 7,27 8,23 9,19 10,15 11,12 12,08 13,04 14,00

PA5C 30mm

PA5C 40mm

PA5C 50mm

PA5C 60mm

PA5C 80mm

PA5C 100mm

PA5C 120mm

PA5C 150mm

Panouri Termoizolante de Acoperis - simpla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


1,5 2,3 3,0 3,8 4,6 5,4 6,1 6,9 7,7 8,5 9,2 10,0

PA5C 30mm

PA5C 40mm

PA5C 50mm

PA5C 60mm

PA5C 80mm

PA5C 100mm

PA5C 120mm

PA5C 150mm

Panouri Termoizolante de Acoperis - dubla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

20

40

60

80

100

120

140

160

180

200

220

240

260


1,50 2,46 3,42 4,38 5,35 6,31 7,27 8,23 9,19 10,15 11,12 12,08 13,04 14,00

PA5C 30mm

PA5C 40mm

PA5C 50mm

PA5C 60mm

PA5C 80mm

PA5C 100mm

PA5C 120mm

PA5C 150mm

Load uniformly



[m]

30 40 50 60 80 100 120 150 30 40 50 60 80 100 120 150

60 L= 2,7 3,35 3,95 4,5 5,5 6,45 7,3 8,5 3,6 4,5 5,3 6 7,4 8,65 9,85 11,5

80 L= 2,45 3 3,55 4,05 4,95 5,8 6,55 7,65 3,2 4 4,7 5,4 6,6 7,75 8,8 10,3

100 L= 2,25 2,75 3,25 3,7 4,55 5,35 6,05 7,05 2,95 3,65 4,3 4,95 6,05 7,1 8,1 9,4

120 L= 2,1 2,6 3,05 3,45 4,25 5 5,65 6,6 2,75 3,4 4 4,55 5,6 6,6 7,5 8,8

140 L= 1,95 2,45 2,85 3,25 4 4,7 5,35 6,25 2,55 3,2 3,75 4,3 5,3 6,2 7,05 8,3

160 L= 1,85 2,3 2,7 3,1 3,8 4,45 5,05 5,95 2,35 3 3,55 4,05 5 5,85 6,7 7,85

180 L= 1,75 2,2 2,6 2,95 3,6 4,25 4,8 5,65 2,25 2,8 3,35 3,85 4,75 5,6 6,3 7,5

200 L= 1,65 2,1 2,5 2,85 3,5 4,1 4,6 5,45 2,15 2,65 3,2 3,65 4,55 5,35 6,1 7,15

220 L= 1,55 2 2,4 2,7 3,35 3,95 4,4 5,25 2,05 2,55 3,05 3,5 4,35 5,1 5,85 6,85

240 L= 1,45 1,9 2,3 2,6 3,2 3,8 4,2 5,05 1,95 2,45 2,95 3,35 4,15 4,9 5,6 6,6

250 L= 1,4 1,85 2,25 2,55 3,15 3,75 4,1 5 1,9 2,35 2,8 3,2 4 4,85 5,5 6,5



The following characteristics are added to the PIR fire resistant thermal insulation: › Fire resistance - the ability of the prefabricated element to limit the spreading of

flames for a certain period of time. The fire certification of the panels is defined by the following characteristics:

(R) – Bearing capacity (E) – Sealing upon disseminati-on of fumes and gases

(I) – Thermal insulation

› Polar thermal insulating wall panels with visible fastening and THICKNESS 50mm – EI 20’ › Polar thermal insulating wall panels with visible fastening and THICKNESS 60mm – EI 20’ › Polar thermal insulating wall panels with visible fastening and THICKNESS 80mm – EI 30’ › Polar thermal insulating wall panels with visible fastening and THICKNESS 100mm – EI 30’ › Polar thermal insulating wall panels with visible fastening and THICKNESS 120mm – EI 30’

› Polar thermal insulating wall panels with visible fastening and THICKNESS 150mm – EI 30’ › Polar thermal insulating wall panels with visible fastening and THICKNESS 180mm – EI 30’ › The panels are certified according to the classification reports: CR-79-01 / 06.06.2016

and CR-79-02 / 06.06.2016 for compliance with BDS EN 13501-2: 2007 + A1: 2009 › Reaction to fire - the ability of the prefabricated composite element to withstand

combustion. › For their reaction to fire the panels have been classified as follows:

Behaviour with fire Smoke dissemination Condensation

B - s 2 , d 0 › The panels are certified according to the report 1871 — CPR-RtF-156 for complian-

ce with EN 13501-1: 2007 + A1: 2009


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


16

1.000 mm

D60 80 100 120 150 200

Wall panels with visible fastening and mineral wool core

The panels are suitable for use on any type of construction that has specific requirements of behavior with fire and sound insulation. They are suitable for facades of industrial and office buildings, production halls, warehouses, gyms, hypermarkets, business centers, garages, gas stations.

Characteristics of the product: › Maximum standard LENGTH: 13.5 m, up to a maximum of 15 m, but exceptionally

panels up to a LENGTH of 17 m can be delivered;

› Polar insulating panel core: MINERAL WOOL;

› Pre-painted galvanized steel metal sheet - 25 μm THICKNESS polyester paint, with various micro profiling, coated with protective foil on both sides;

› The mechanical fastening between the panels offers high precision to the assem-bly process, whereas the sealing gasket helps to ensure the thermal insulation and the sealing of the joint;


› Fire resistant;

› Reaction to fire.








Detail - PPPV with screw

17


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300

Distanta intre reazeme - L [m]1,5 2,1 2,7 3,3 3,9 4,5 5,0 5,6 6,2 6,8 7,4 8,0

PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 200mm


Sarc

ina

unifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 200mm


Sarc

ina

unifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 200mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPV 60mm

PPPV 80mm

PPPV 100mm

PPPV 120mm

PPPV 150mm

PPPV 200mm

Load uniformly distribu-

ted q [daN/

m2]


[m]

60 mm 80 mm 100 mm 120 mm 150 mm 200 mm 60 mm 80 mm 100 mm 120 mm 150 mm 200 mm

60 L= 4 5 5,9 6,75 7,9 9,7 4,9 6,15 7,3 8,4 9,9 11,5

80 L= 3,5 4,4 5,2 5,95 7 8,65 4,2 5,3 6,3 7,3 8,65 9,95

100 L= 3,15 3,95 4,7 5,35 6,35 7,85 3,7 4,7 5,6 6,5 7,7 8,85

120 L= 2,85 3,6 4,3 4,95 5,85 7,2 3,3 4,2 5,05 5,85 7 7,95

140 L= 2,65 3,3 3,95 4,55 5,4 6,75 3 3,85 4,6 5,35 6,4 7,25

160 L= 2,45 3,1 3,7 4,25 5,05 6,3 2,75 3,5 4,25 4,95 5,9 6,65

180 L= 2,3 2,9 3,45 4 4,8 5,95 2,5 3,25 3,95 4,6 5,5 6,15

200 L= 2,15 2,7 3,25 3,8 4,5 5,65 2,35 3,05 3,7 4,3 5,2 5,75

220 L= 2 2,55 3,1 3,6 4,3 5,4 2,2 2,85 3,45 4,05 4,9 5,4

240 L= 1,9 2,45 2,95 3,4 4,1 5,15 2,05 2,65 3,25 3,8 4,6 5,05

250 L= 1,85 2,4 2,85 3,35 4 5 2 2,6 3,15 3,7 4,45 4,9




Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


18

1.000 mm

D

60 80 100 120 150

Wall panels with concealed fastening and mineral wool core

The panels are suitable for use on any type of construction that has specific requirements of behavior with fire and sound insulation. They are suitable for facades of industrial and office buildings, production halls, warehouses, gyms, hypermarkets, business centers, garages, gas stations.



› Polar insulating panel core: MINERAL WOOL;

› Pre-painted galvanized steel metal sheet - polyester paint with THICKNESS of 25 μm, and various micro profiling, protected by protective foil on both sides.



› Fire resistant









Detail - PPA with screw

19


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPA 60mm

PPPA 80mm

PPPVA 100mm

PPPA 120mm

PPPA 150mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

23

46

69

92

115

138

162

185

208

231

254

277

300


PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm

PPPA 150mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

30

60

90

120

150

180

210

240

270

300


PPPA 60mm

PPPA 80mm

PPPVA 100mm

PPPA 120mm

PPPA 150mm


Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

23

46

69

92

115

138

162

185

208

231

254

277

300


PPPA 60mm

PPPA 80mm

PPPA 100mm

PPPA 120mm

PPPA 150mm

Load uniformly distributed q [daN/m2]


[m]

60 mm 80 mm 100 mm 120 mm 150 mm 60 mm 80 mm 100 mm 120 mm 150 mm

60 L= 4 5 5,9 6,7 7,9 4,9 6,15 7,3 8,4 9,8

80 L= 3,5 4,4 5,2 5,9 7 4,2 5,3 6,3 7,2 8,6

100 L= 3,15 3,95 4,7 5,35 6,3 3,7 4,7 5,6 6,4 7,6

120 L= 2,85 3,6 4,3 4,9 5,8 3,3 4,2 5,05 5,8 6,9

140 L= 2,65 3,3 3,95 4,5 5,4 3 3,85 4,6 5,3 6,3

160 L= 2,45 3,1 3,7 4,25 5 2,75 3,5 4,25 4,9 5,9

180 L= 2,3 2,9 3,45 4 4,7 2,5 3,25 3,95 4,5 5,5

200 L= 2,15 2,7 3,25 3,8 4,5 2,35 3,05 3,7 4,3 5,1

220 L= 2 2,55 3,1 3,6 4,3 2,2 2,85 3,45 4 4,8

240 L= 1,9 2,45 2,95 3,3 4,1 2,05 2,65 3,25 3,7 4,6

250 L= 1,85 2,4 2,85 3,2 4 2 2,6 3,15 3,5 4,5




Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


20

1.000 mm

D60 80 100 120 150

Roof panel with 5 folds and mineral wool core

The panels are suitable for use on any type of construction that requires good insulation, quick installation and last but not least a high degree of fire resistance. They are suitable for roofs with a minimum slope of 7%.

Characteristics of the product: › Maximum standard LENGTH: 13.5m, up to a maximum of 15m, but exceptionally

panels up to a LENGTH of 17m can be delivered;

› Polar insulating panel core: mineral wool;

› Pre-painted galvanized steel metal sheet - 25 μm THICK, polyester paint, with various micro profiling, coated with protective foil on both sides. The inner face of the panel can also be made of the following materials: centesimal aluminum, bituminous cardboard, paper;



› Notching of the panels - cutting the lower sheet and the mineral wool core, in order to overlap the panels, can be done directly in the factory.

› Fire resistant










21

Polar Panouri Permoizolante de Acoperis 5 Cute- simpla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

20

40

60

80

100

120

140

160

180

200

220

240

260


1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00 6,50 7,00

PA5C 60mm

PA5C 80mm

PA5C 100mm

PA5C 120mm

PA5C 150mm

Polar Panouri Permoizolante de Acoperis 5 Cute - dubla rezemare

Sarc

ina u

nifo

rm d

istrib

uita

- q

[daN

/mp]

0

20

40

60

80

100

120

140

160

180

200

220

240

260


1,50 1,93 2,37 2,80 3,23 3,67 4,10 4,53 4,97 5,40 5,83 6,27 6,70 7,13 7,57 8,00

PA5C 60mm

PA5C 80mm

PA5C 100mm

PA5C 120mm

PA5C 150mm

Load uniformly distribu-

ted q [daN/

m2]


[m]

60 mm 80 mm 100 mm 120 mm 150 mm 60 mm 80 mm 100 mm 120 mm 150 mm

60 L= 4,2 5,15 6,05 6,9 8,1 5,15 6,4 7,55 8,65 10,2

80 L= 3,65 4,55 5,35 6,1 7,2 4,45 5,5 6,55 7,5 8,9

100 L= 3,3 4,1 4,85 5,55 6,5 3,95 4,9 5,85 6,7 7,95

120 L= 3 3,75 4,45 5,1 6 3,55 4,45 5,25 6,05 7,2

140 L= 2,8 3,45 4,1 4,7 5,5 3,2 4,05 4,85 5,55 6,65

160 L= 2,6 3,25 3,85 4,4 5,2 2,95 3,7 4,45 5,15 6,15

180 L= 2,45 3,05 3,6 4,15 4,9 2,75 3,45 4,15 4,8 5,75

200 L= 2,3 2,85 3,4 3,95 4,65 2,55 3,2 3,85 4,5 5,35

220 L= 2,15 2,7 3,25 3,75 4,45 2,4 3 3,65 4,2 5,05

240 L= 2,05 2,6 3,05 3,55 4,2 2,25 2,85 3,4 4 4,75

250 L= 2 2,5 3 3,45 4,1 2,15 2,75 3,35 3,85 4,6




Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


Unifo

rmel

y di

strib

uted

load

- q

[daN

/m2]


22

1.000 mm

D

30 50 60

Roof panels of ISO-TILE

The ISO-Tile roof panel represents the maximum evolution, in the aes-thetic sense, of a polar insulating panel destined for the roofs of civil constructions. The profile, in the form of tiles or shingles, allows the achievement of functional roofs, valuable from an aesthetic point of view, light, safe, impermeable and with a simple and fast installation. It is adapted for civil roofs or in the industrial sector where the construc-tions are located in areas with specific urban requirements.

Characteristics of the product: › Maximum standard LENGTH: 13.5m, up to a maximum of 15m, but excep-

tionally panels up to a LENGTH of 17m can be delivered;

› Polar insulating panel core: Polyurethane PUR foam;

› Pre-painted galvanized steel sheet with a thickness of 0.4 ÷ 0.5 mm, in a glossy or matte version, coated with protective foil on both sides. The inner face of the panel can also be made of the following materials: centesimal aluminum, bituminous cardboard, paper;



› Panel notching - cutting of the bottom sheet and Polyurethane foam core to overlap the panels - can be done directly in the factory.







Thermal properties

Panel THICKNESSR

Thermal resistance

U Transmittance

30 mm 2.17 0.46

50 mm 3.33 0.31

60 mm 3.70 0.27

Thicknesses availa-ble for production

23

1.000 mm

D

120 150 180

Cold related panels

The panels are suitable for use on any type of construction that has specific sound and thermal insulation requirements. They are suitable for the construction of warehouses and cold storage rooms at negative temperatures.



› Polar insulating panel core: Polyurethane foam PUR or polyisocyanurate foam PIR;

› Pre-painted galvanized steel metal sheet - 25 μm thickness polyester paint, with various micro profiling, coated with protective foil on both sides.



› Sizing tolerances according to SR EN 14509: 2013.








24

RAL 5010RAL 3009RAL 3000RAL 1015 RAL 9006RAL 6011 RAL 6021 RAL 9007RAL 9002RAL 8017RAL 8004RAL 7016

Types of material used to build the inner face of the roof panels

« CENTEZIMAL ALUMINUMPolar insulating panel for the roof, made in the version with a corrugated aluminum face and a sheet metal face pre-painted in gal-vanized steel, the core of the panel being made of Polyurethane foam.

BITUMINIZED ASPHALTED CARDBOARD » Polar insulating panel for the roof, made in the version with a bituminous asphalt cardboard face and a sheet metal face pre-painted in galvanized

steel, the core of the panel being made of Polyurethane foam.

It is recommended for roofs that are to be waterproofed.

KRAFT PAPER »Polar insulating roof panel, made in the version with a Kraft paper

face and a sheet metal face pre-painted in galvanized steel, the core of the panel being made of Polyurethane foam.

PVC MEMBRANE » Polar insulating roof panel, made in the version with a PVC membrane face

and a pre-painted sheet metal face made of galvanized steel, the core of the panel being made of Polyurethane foam.

It is recommended to be used for roofs with small slopes.

« GLASS FIBREPolar insulating panel for the roof, made in the version with a fiber-glass face and a sheet metal face pre-painted in galvanized steel, the core of the panel being made of Polyurethane foam.

It is recommended to be used for constructions in the agro-technical field.

25

Self-drilling screws

Sealing gaskets

Fastening on metal structures with THICKNESSES from 1.5mm

to 5mm

Typology of the panel Thickness of the panel Typology of the screw

Wall panel with visible and concealed fastening

40 6,3 x 62 v1650 6,3 x 82 v1660 6,3 x 82 v1680 6,3 x 102 v16100 6,3 x 122 v16

Roof panels with 3 and 5 folds

30 6,3 x 102 v1640 6,3 x 102 v1650 6,3 x 122 v1660 6,3 x 122 v1680 6,3 x 152 v16100 6,3 x 172 v16

Fastening on metal structures with THICKNESSES from 3mm to

12mm



40 6,3 x 80 v1650 6,3 x 95 v1660 6,3 x 95 v1680 6,3 x 115 v16100 6,3 x 135 v16


30 6,3 x 115 v1640 6,3 x 115 v1650 6,3 x 135 v1660 6,3 x 135 v1680 6,3 x 155 v16100 6,3 x 195 v16

Fastening on wood structures



40 6,3 x 100 GTW50 6,3 x 100 GTW60 6,3 x 120 GTW80 6,3 x 140 GTW100 6,3 x 160 GTW


30 6,3 x 120 GTW40 6,3 x 140 GTW50 6,3 x 140 GTW60 6,3 x 160 GTW80 6,3 x 210 GTW100 6,3 x 210 GTW

Fastening on concrete structures



40 6,3 x 100 BS50 6,3 x 100 BS60 6,3 x 120 BS80 6,3 x 140 BS100 6,3 x 160 BS


30 6,3 x 120 BS40 6,3 x 140 BS50 6,3 x 140 BS60 6,3 x 160 BS80 6,3 x 160 BS100 6,3 x 180 BS

They are used to seal free spaces at the ends of roof sandwi-ch panels and at the upper and lower ends of wall panels.

26

®

Rever MULTIPURPOSE double-leaf doors consisting of:

� Leaf of galvanised steel-sheet, filler of rigid honey-combfibre structure, total thickness 39 mm.

� Corner frame made of profiled galvanised steel-sheetprepared for installation with brackets or bolts The frameis supplied non-assembled.

� Standard lock in main leaf with cylinder bore and keyholefor patent keys. Secondary leaf with central manual boltsfor closing at top and bottom.

� Black colour safety-shaped handle fitted at a height ofapprox. 1075/1125 (FM H 2050/FM H 2150) above thefinished floor.

� Each leaf with 2 bearing hinges and 3 safety bolts athinge side.

� Painted with epoxy-polyester oven-baked powder paintwith anti-scratch goffered finish - light pastel turquoise fordoor leaves (NCS4020-B50G), and a darker shade for theframe (NCS5020-B50G). On request, powder coating inRAL or decorative NDD – Ninz Digital Decor can be appliedfor decorative or graphic elements. Surface treatment ofthe door leaves is carried out using oven-baked epoxy-polyester powder and graphic printing of the decorationon the flat side of the door leaves by means of sprayedinks. The decoration is protected by transparent varnish.The finish can be flat or beaten in accordance with thedecoration selected.

� Reversible door for opening right or left with bottom frameadaptable to floor or detachable for use without bottomframe.

� All Rever doors are prepared to receive a three-pointclosing device (Kit Secur).

Dimensions wall opening FM L x FM Havailable:1200 ( 800 + 400) x 2050/21501300 ( 900 + 400) x 2050/21501400 ( 700 + 700) x 2050/21501600 ( 800 + 800) x 2050/21501800 ( 900 + 900) x 2050/21502000 ( 1000 + 1000) x 2050/2150

NB.To request the doors can be supplied indifferent RAL tones, combined with anti-panic crossbars, door-closers, ventilationholes, louvers, frame extensions or specialcasings.

32

Wall

open

ing (FM

H)

Net

pass

age

= F

M H

- 4

0

Exte

rnal f

ram

e =

FM

H +

8

With floor-part frame

FFL

Vertical Sections

NP main leaf = L1 - 74

Wall opening (FM L)

External frame = FM L + 22

Net passage = FM L - 74

Floor catch set

L2 L1

Horizontal Sections

92

SPECIFICATIONS/SECTIONSRever MULTIPURPOSE double-leaf doors

7

44

Roof skylights

Modular corrugated sheet roofing system, where simple applications are required for commissi-oning and which guarantee a long service life.

They are suitable for lighting the roofs of industrial buildings and warehouses, in combination with metal panels and sandwich panels.

Polycarbonate panels are shielded against UV rays by a protective film through the coextrusion process and exhibit the following features:

› Easy to position;

› Low weight;

› High transparency;

› Thermal insulation;

› No internal condensation is created;

› Self-bearing;

› Resistance to breakage;

› Fire resistance;

› High resistance to bad weather;

› Resistance to chemical agents;

Sectional and fire resistant metal doors

27

Roof and wall joint masking accessories

Sanitarian profilesThey are used for rooms where special thermal and hygienic-sanitary requirements are imposed.

soffit and soffit angle

corner inserted in the soffit

plinth and plinth cover

corner inserted in the plinth

Ridge

Outer corner Inner corner Dropper Omega 3D

Under-ridge Spout Gable

28

packaging • transport • handling • storage

Sandwich panels can be easily damaged if not handled properly, at every stage, from the production process to their assembly.

PackagingThe panels leave the production line in the form of a pack-age. The number of panels in a package depends on the type of panel, its THICKNESS and LENGTH.

Protection foilDuring production, the panels are laminated on both sides of the metal surface with a protective foil. It protects the surface of the panels against damage during transport, storage and assembly. The foil is a temporary protection solution because, if it is exposed to weather conditions and sunlight for too long, it can adhere to the metal and, as a result, it may become impossible to remove.This is why it is recommended that the foil be removed with-in a maximum of one month from the date of production or no later than 3 weeks after sun exposure.The date of manufacture will be specified on the label of each package of panels delivered to the customer.

Panel transportIf the transport is provided by the customer, there are some basic principles that have to be considered:

› In order to load the panel packages into the truck, fork-lifts will be used;

› The panels will be transported only with vehicles which are perfectly functional from the technical point of view;

› The loading platform must be flat and clean, without pro-trusions or sharp pieces;

› Open tarpaulin semi-trailers are recommended, having a minimum width of 2.5m, as difficulties might be en-countered in loading two packages of panels in a closed semi-trailer (this having in general a modular width of 1.2m)

› The panels must be secured with straps, at least 2 pieces for 2 packages, if they are loaded in two rows or 2 pieces per package if they are loaded in one row. Packages must be secured with straps, placed at a distance of maximum 3m between each other.

› Panel packages shall not be transported on top of other goods.It is very important that the panels are transported, handled and stored in optimal conditions so that they can maintain their sustainability.During the manufacturing process, the surface of the polar insulating panels shall be protected by temporary protec-tion systems, especially of an aesthetic nature - through a polyethylene film (adhesive by contact).As general rules for application during the processes of packaging, transport, handling and storage protection mea-sures must be taken so as to ensure:

› Protection of surfaces against abrasion phenomena, es-pecially during transport and handling;

› Protection against hits and deformations;

› Protection against weather or humidity resulting from condensation;

Avoiding permanent deformation on the support elements of the panel package.

PACKAGINGThe panels are delivered in packages wrapped with stretch foil, on Polystyrene supports. The number of panels in the package varies depending on the size (THICKNESS, LENGTH) or customer requirements, taking into account the limitations imposed by the manufacturing technology. The wall panels are stacked in the package with the outer (mounting) face facing up.

TRANSPORTPolar insulating panels can be transported with side-load-ing or top-loading vehicles. The special conditions of load-ing and transport can only be accepted at the written re-quest of the buyer (who thus assumes full responsibility).

The carrier is solely responsible for the integrity of the cargo throughout the transport. Upon receipt of the goods, the ben-eficiary has the obligation to check and record on the trans-port documents any non-conformity that (s)he has found.

HANDLINGBefore starting to unload the thermal insulation panels, check the condition of the packages. The unloading opera-tion shall be performed with a forklift or crane. Textile strips and spacer boards shall be used that must exceed the width of the panels on each side by 50mm. The packages shall be unloaded one by one, regardless of the LENGTH of the panels. Packages shorter than 6 m can be lifted with a forklift or fork, using textile belts. Packages longer than 6m shall be handled using a crane with a balance beam with the help of textile strips located at a distance of no more than 3m from the edges of the panels. The handling shall be done with great care, so as not to damage the surfaces of the panels. The panels must be removed from the package by lifting, and not by sliding, thus avoiding surface damage.

The individual handling of the panels as well as the remov-al of the protective foil shall be done by trained personnel. It is forbidden to hold and lift the panel by only one face, as there is a risk of it detaching from the core of the Poly-urethane foam. Workers must always wear gloves lest they should cut or scratch themselves.

STORAGEThe packages shall be stored on hard, uniform, smooth sur-faces to avoid damaging the panels. The packages shall be stored slightly inclined in order to allow rainwater to drain. The packages shall not be stored directly on the ground, but on wooden or Polystyrene supports. If overlaps are made, wooden or Polystyrene spacers with the widest possible support base should be used. A maximum of 2 packages can be overlapped. If it is not possible to ensure the storage conditions specified above, it is forbidden to overlap the packages with panels. People should not step directly on the package. For longer-term packages stored indoors, en-sure adequate protection (with tarpaulins) from rainwater, snow, wind and contamination. Packages that are partially wrapped and individual panels shall be secured with straps or protected from strong winds. The storage of dark-col-ored panels shall be done by avoiding their exposure to the direct action of sunlight.

ContactŞos. Pogonele, Nr. 12, Buzău, România 0238.726.731, 0238.726.730

[email protected]

Documents

THERMAL INSULATION PANELSnew.panouripolar.ro/catalog/catalog_Romconstruct_Polar... · 2020. 11. 26. · Panouri Termoizolante de Perete - simpla rezemare Sarcina uniform distribuita