TEQIP-III, BPUT (ATU), Odisha Sponsored NATIONAL CONFERENCE ON MECHANICAL,

MATERIALS & RENEWABLE ENERGY TECHNOLOGY

NCMMRET-202010-11 January 2020

Website: www.eatm.in

Phone: 06755-243621, Fax: 0674-2557341

EINSTEIN ACADEMY OFTECHNOLOGY AND MANAGEMENT

EINSTEIN ACADEMY OFTECHNOLOGY AND MANAGEMENT

(NAAC Accredited B++ Grade Engineering College)(Approved by AICTE, New Delhi & Affiliated to BPUT, ATU, Odisha)

Baniatangi, Bhubaneswar, Khordha-752060, Odisha

DEPARTMENT OFMECHANICAL ENGINEERING

Organized by

PAPER SUBMISSIONManuscripts should be prepared in IEEE format only. Authors are requested to follow the IEEE template for preparation of the manuscripts. Soft copy of the prepared manuscript (.doc /.docx format only) along with the scanned copy of the filled in and duly recommended registration form should be mailed to ncmmret2020@eatm.in before the deadline.

REGISTRATION DETAILS

Faculty Members & Research Scholars : ₹ 1000

Students (UG and PG) : No fee

Participants from Industries : ₹ 2500

PAYMENT DETAILS

Account Name : Principal, Einstein Academy of Technology and ManagementBank : Punjab National BankBranch : Chandrasekharpur, Bhubaneswar Account No. : 2977002100008213IFSC Code : PUNB0297700

Full paper submission : 31.12.2019

Submission of camera-ready paper : 05.01.2020

IMPORTANT DATES

Intimation of acceptance : 03.01.2020

Last date of registration : 08.01.2020

E-mail: ncmmret2020@eatm.in

CONVENER

Professor (Mech. Engg.) & Dean (Academics)Einstein Academy of Technology & Management, Bhubaneswar-752060, Odisha, Phone: 7978062911

Dr. Bhabani Prasanna Pattanaik

HOW TO REACH

Name: ……………………………………………………………………..

NCMMRET-2020

Department: ……………………………………………………………

Designation: …………………………………………………………….

………………………………………………………………………………..

Mobile No: ………………………………………………………………

Qualification: …………………………………………………………..

TEQIP-III, BPUT (ATU), Odisha Sponsored

National Conference on Mechanical, Materials

& Renewable Energy Technology

Mailing Address: ……………………………………………………..

………………………………………………………………………………..

Transaction No: …………………………..………………………….

REGISTRATION FORM

Organization: …………………………………………………………..

REGISTRATION FEE

Date: ……………………………. Amount (₹): ……………………

10-11 January 2020

Date: Signature of Applicant

Prof./Dr./Mr./Ms…………………………………………………. is

an employee/student of this institute/organization. If

selected, he/she will be permitted to attend the

conference.

RECOMMENDATION

E-mail: …………………………………………………………………….

Date: Official Seal

Signature of Head of the Institution

CRPFSQUARE

KHANGAGIRISQUARE

KHORDHACOLLECTORATE

BE

RH

AM

PU

R

EATMCAMPUS

AIRPORT

BARAMUNDABUS STAND

CU

TTA

CK

Mr. Bibhuti Barad, Lab. Asst., ME

Mr. Om Prakash Satapathy, Lab. Asst., ME

CHIEF PATRONS

Prof. (Dr.) C. R. Tripathy, Hon'ble Vice-Chancellor, BPUT

Shri Basanta Kumar Bisoi, Chairman, EATM

PATRONS

MENTORS

Prof. (Dr.) Ranjan Kumar Jena, Coordinator, TEQIP-III, BPUT

Shri Krushna Chandra Bisoi, Secretary, EATM

Prof. (Dr.) Suvendu Prasad Sahu, Principal, EATM

Dr. Sivkumar Mishra, EAP Coordinator, TEQIP-III, BPUT

CONVENER

Dr. Bhabani Prasanna Pattanaik, Dean, Academics

COORDINATOR

Prof. Arupananda Mohanty, HOD, ME

CO-COORDINATORS

Prof. Riyazuddin Khan, Vice-Principal

Dr. Anil Kumar Mishra, HOD, CSE

Prof. Bibhu Prasad Nanda, Head, IQAC

Prof. Tapan Kumar Panda, HOD, BSH

Prof. Snigdha Sarangi, HOD, EE & EEE

Prof. Sambit Pattnaik, HOD, ECE

Prof. Abinash Paikaray, HOD, CE

Mr. Baidyanath Das, Accountant

Mr. Bivaseet Pradhan, Asst. Prof., ME

Mr. Rakesh Kumar Barik, Asst. Prof., ME

Mr. Srujan Kumar Mishra, Asst. Prof., ME

Mr. Sangram Behera, Asst. Prof., ME

Mr. Kumar Gourab Das, Asst. Prof., ME

Mr. Sujit Kumar Samal, Sr. Accountant

Mr. Biswajeet Nayak, Asst. Prof., ME

Mr. Satyajit Nayak, Asst. Prof., ME

Mr. Kishore Chandra Barik, Head, Transport

Mr. Pawan Kumar, Asst. Prof., ME

Mr. Ritesh Kumar Hui, Asst. Prof., ME

Mr. Bidyutkanta Sahoo, Asst. Prof., ME

Mr. Binayak Dash, Asst. Prof., ME

Mr. S. S. Ray Mohapatra, Asst. Prof., ME

Mr. Biswajit Sahoo, Sr. Accountant

Mr. Dhaneswar Chhotray, PRO

ORGANIZING COMMITTEE

Mr. Sangram Parida, Asst. Prof., ME

KEY AREAS

PUBLICATION

Prof. (Dr.) P. K. Mahanta, NIT Arunachal Pradesh

Prof. (Dr.) R. D. Misra, NIT Silchar

Prof. (Dr.) A. K. Agarwal, IIT Kanpur

v Fluid Mechanics & Aerospace Propulsion

v Computational Fluid Dynamics

v Optimization Techniques

v Rapid Prototyping

Prof. (Dr.) N. Sahoo, IIT Guwahati

ADVISORY COMMITTEE

v Finite Element Analysis

v Heating, Ventilating & Air-conditioning Systems

interactions among the students, researchers, scientists, practitioners and engineers and helps them to exchange their ideas and approaches in the recent advances made in Mechanical, Materials and Renewable Energy Technology.

v Biomass and Bioenergy

Papers will be accepted based on their originality and recommendation of potential reviewers. All the accepted papers will be published in the Proceedings of NCMMRET-2020. The modified versions of the papers after peer-review will be considered and forwarded for publication in SCOPUS Database.

Papers are invited in the following key research areas to be addressed (but not limited to..)

v Energy Conversion Technologies

v Fuel Cells

v Composite & Smart Materials

v Internal Combustion Engines

v Modern & Green Manufacturing

v Automotive Engineering

v Tribology

v Powder Metallurgy

v Robotics & Computer Integrated Manufacturing

v CAD/CAM/CAE

v Renewable Energy & Alternative Fuels

v Industrial Automation

v Artificial Intelligence in Engineering

v Nanotechnology

v Thermodynamics & Heat Transfer

Prof. (Dr.) U. K. Saha, IIT Guwahati

Prof. (Dr.) B. B. Biswal, NIT Meghalaya

Prof. (Dr.) P. K. Bose, NSHM Durgapur

Prof. (Dr.) Alok Satapathy, NIT Rourkela

Prof. (Dr.) Debadutta Mishra, VSSUT Burla

Dr. S. M. Ali, IE Kolkata

ABOUT THE INSTITUTION

Einstein Academy of Technology and Management (EATM) was

established in the year 2009 by our beloved Chairman Shri Basanta

Kumar Bisoi and Secretary Shri Krushna Chandra Bisoi. Our campus

is situated at a distance of 25 kms towards south from the city of

Bhubaneswar. The college is affiliated to Biju Patnaik University of

Technology (BPUT) and approved by AICTE, New Delhi. EATM offers

six UG programs and two PG programs in engineering. Excellent

strides are being made for contributing top quality technical

education and meticulous efforts are being made for chiseling the

younger generation. Priority is given to make the students

technologically savvy. Today EATM stands as a premier institution

for the students who yearn for quality technical education and

enhancement of research.

ABOUT BIJU PATNAIK UNIVERSITY OF TECHNOLOGY

Biju Patnaik University of Technology (BPUT) was founded by an Act

of the Odisha State Legislature in November 2002. It is the State

Technical University of Odisha and is a premier Affiliating Technical

University (ATU) of the country. The domain of BPUT covers the

entire Odisha state with its headquarters situated at Rourkela. Since

its inception, BPUT has been endlessly contributing towards the

promotion of education, training and state-of-the-art research in

diversified fields for the progress of knowledge and for betterment

of the society. The university has more than 160 affiliated colleges,

06 constituent colleges and the Centre for Advanced Post Graduate

Studies (CAPGS) under its jurisdiction. Over the past 17 years of its

existence, the university has led the way in strengthening academia,

research and industry-institute collaboration activities within the

state of Odisha.

ABOUT THE DEPARTMENT

NCMMRET 2020 aims at providing a forum at the National level to

present and discuss the most recent R&D activities and challenges in

the field of Mechanical, Materials and Renewable Energy Technology. It also provides a strong platform for bringing in

SCOPE OF THE CONFERENCE

The Mechanical Engineering Department of EATM was established

in the year 2009. The department comprises of a team of highly

qualified and motivated faculty members as well as well-equipped

laboratories to conduct the UG and PG programs. At present, the

department is offering B. Tech (Full time) in Mechanical Engineering

with an intake of 120 students and M. Tech (Full time) in Mechanical

Systems Design with an intake of 18 students. The department aims

at generating employable Mechanical Engineers to lead a successful

career and contribute to the society by excelling in their respective

fields of endeavor.