T MNTAHP 1012 GB - Tecna - Inicio · RC GROUP S.p.A. T_MNTAHP_1012_GB R410A 3 GENERAL CHARACTERISTICS ... (Victaulic) are supplied as standard with Victaulic joint and adapter pipe

Split-system heat pump liquid chillers for indoor installation

23 ÷ 365 kW COOLING 27 ÷ 432 kW HEATING

technical catalogueT_MNTAHP_1012_GB

2 RC GROUP S.p.A. T_MNTAHP_1012_GB R410A

INDEX

GENERAL CHARACTERISTICS .................................................................................................. 3

SERIES IDENTIFICATION ........................................................................................................... 3

MODEL IDENTIFICATION ........................................................................................................... 3

WORKING LIMITS........................................................................................................................ 4

MAIN COMPONENTS .................................................................................................................. 7

OPTIONAL ACCESSORIES ......................................................................................................... 9

TECHNICAL DATA ..................................................................................................................... 10

ACOUSTIC DATA....................................................................................................................... 15

ELECTRIC DATA ....................................................................................................................... 16

MP.COM: MICROPROCESSOR CONTROL SYSTEM .............................................................. 17

OPTIONAL ACCESSORIES – REMOTE AIR COOLED CONDENSER .................................... 18

SERIES IDENTIFICATION ......................................................................................................... 18

OPTIONAL ACCESSORIES - PARTIAL HEAT RECOVERY SYSTEM ..................................... 24

TYPICAL INSTALLATION DIAGRAM FOR MACHINES WITH REMOTE AIR COOLED CONDENSER ............................................................................................................................. 37


GENERAL CHARACTERISTICS

Split-system heat pump liquid chillers for chilled water production in summer time and hot water production in winter time (inversion on refrigerant circuit). The machines are made for indoor installation. Machines supply fully assembled with refrigerant charge and control systems. The installation requires electrical and hydraulic connections only allowing high costs and time reduction. Final assembly on all machines before shipment including running test, reading and monitoring of operating parameters, alarms simulation and visual check. Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001. RC Group has been the first Italian company in its segment to get the ISO 9001 in October 13th, 1991 with certificate ICIM 0018. The machines are in full compliance with European Norms 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments. SERIES IDENTIFICATION

Split-system heat pump liquid chillers equipped with scroll compressors and welded plate heat exchanger. R410A refrigerant charge. S version: single refrigerant circuit Cooling capacity 23,3 ÷ 185,0 kW Heating Capacity 27.1 ÷ 219,0 kW D version: double refrigerant circuit Cooling capacity 39,7 ÷ 365,0 kW Heating Capacity 46,8 ÷ 432,0 kW MODEL IDENTIFICATION MANTA A HP T 48 P 2 J7 D A HP Split-system in Heat Pump version T Power supply T Three-phase 400/3/50 48 Cooling capacity (kW) at nominal conditions P Compressor type P Scroll fully-hermetic R410A 2 Compressors number J7 Cabinet size D Refrigerant circuit S Single refrigerant circuit D Double refrigerant circuit


-10 -5 0 5 10 15 20 25 30 35 40 45 (°C )

10

-13

-10

0

5

15

20

(°C)

-5

WORKING LIMITS COOLING – chilled water production Working limits diagram for chilled water production according to the ambient temperature and chilled water outlet temperature.

3÷8°C t range between evaporator water inlet/outlet OPERATING ENVELOPE “A” Machine operating envelope whose cooling capacity is calculable with the electronic selection program RC WORLD.

OPERATING ENVELOPE “B” Machine operating envelope where you need to contact RC Group sales department to calculate the cooling capacity.

The values are indicative. The working temperatures are influenced by a series of variables as:

• Working conditions • Thermal load • Active capacity steps • Cleanness status of the finned pack heat exchanger • Set of the microprocessor control

WORKING LIMITS IN COOLING MODE

Chi

lled

outle

t wat

er

tem

pera

ture

Use glycol solution

Ambient temperature

Use glycol solution and BRINE kit

B

A


-10 -5 0 5 10 15 20 25 30 (°C)

35

40

45

50

55

30

(°C) 60

HEATING – hot water production for heating (Heat pump ) Working limits diagram for hot water production according to the ambient temperature and hot water outlet temperature.

OPERATING ENVELOPE “A” Machine operating envelope whose cooling capacity is calculable with the electronic selection program RC WORLD.

OPERATING ENVELOPE “B” Machine operating envelope where you need to contact RC Group sales department to calculate the cooling capacity.

The values are indicative. The working temperatures are influenced by a series of variables as:

• Working conditions • Thermal load • Active capacity steps • Cleanness status of the finned pack heat exchanger • Set of the microprocessor control

______________________________________________ PARTIAL HEAT RECLAIM Working limits for hot water production from partial heat reclaim system. The system is not regulated and the heating capacity which is supplied depends on the machine working conditions. 40÷75°C hot water outlet temperature range 5÷15°C t range between water inlet/outlet ______________________________________________

Ambient temperature

Hot

wat

er o

utle

t tem

pera

ture

WORKING LIMIT IN HEATING MODE (HEAT PUMP)

B

A


ANTIFREEZE MIXTURES Antifreeze mixtures has to be used when the machine working conditions foresees the chilled outlet liquid temperature lower than 5°C. PROPYLENE GLYCOL Chilled outlet liquid temperature from the machine °C 4 2 1 -2 -4 -6 -9 -12

Percentage in weight of the mixture % 5 10 15 20 25 30 35 40

ETHYLENE GLYCOL Chilled outlet liquid temperature from the machine °C 4 2 0 -4 -7 -9 -10 -13

Percentage in weight of the mixture

% 5 10 15 20 25 30 35 40

WARNING The values are referred to machine working temperature and not to freezing temperature of the used liquid. The use of antifreeze mixtures causes a reduction of the machine performance, Please refer to the RC WORLD electronic catalogue to obtain the effective performance. _______________________________________________ STORING TEMPERATURE If the machine is not installed on receipt and is stored for a long time, store it in a protected place, at temperatures ranging between -30°C and 50°C in absence of superficial condensation and direct sun light.


MAIN COMPONENTS

FRAMEWORK • Base, self supporting frame and panelling in steel plate with protective surfaces treatment in

compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders. • Colour: RAL 9002

COMPRESSORS

• Orbiting spiral (SCROLL) hermetic compressors with spiral profile optimized for R410A refrigerant. • ON / OFF capacity control (0 / 100% each compressor). • 2-pole 3-phase electric motor with direct on line starting. • Phase sequence electronic relay. • Crankcase heater. • Electric motor thermal protection via internal winding temperature sensors. • Rubber supports.

PLANT SIDE HEAT EXCHANGER

• Copper brazed plate type with cover plates, plates and connections in AISI 316 stainless steel: - With single refrigerant circuit for S version machines. - With double refrigerant circuit for D version machines.

• Anticondensate insulation made of polyurethane. • Temperature sensors on water inlet and outlet. • Differential water pressure switch for water flow control.

REFRIGERANT CIRCUIT Components for each refrigerant circuit:

• Reversing valve for refrigeration cycle inversion. Electronic expansion valve. The valve allows high performance and system efficiency thanks to a timely and accurate response to changes in temperature and pressure. The expansion valve is equipped with energy reserve to allow the closure of the valve in the event of lack of power supply.

• Sight glass. • Filter dryer on liquid line. • Service valves on liquid line and gas discharge. • Non-return valve. • Safety valves on high and low pressure side. • Pressure transducers with indication, control and protection functions, on low and high

refrigerant pressure. • High pressure safety switch with manual reset. • Liquid receiver with accessories. • Oil drainage and oil recovery systems. • IDEA® defrosting system.

RC Group patented defrosting system based on a dynamic reading of the evaporating parameters. Through sensors the microprocessor realize the real ice presence on the gas/air heat exchanger and activates the defrosting cycle only when necessary, with consequent energy saving.

• Valves on gas delivery and liquid return for coupling to remote air cooled condenser. • 0÷10V proportional signal to manage the condensing/evaporating control system of the

remote air cooled condenser. • Refrigerant circuit with copper tubing with anticondensate insulation of the suction line. • Plastic capillary hoses for pressure sensors connection. • R410A refrigerant charge.

ELECTRICAL PANEL In accordance with EN60204-1 norms, suitable for indoor installation complete with:

• Main switch with door lock safety. • Magnetothermic switch or fuses for each compressor. • Contactors for each load. • Transformer for auxiliary circuit and microprocessor supply. • Panel with machine controls. • Summer / Winter working mode selector. • Ambient temperature sensor. • Power supply 400/3/50.


CONTROL SYSTEM • MP.COM microprocessor system with graphic display for control and monitor of operating and

alarms status. The system includes: - Voltage free contact for remote general alarm. - Main components hour-meter. - Non-volatile “Flash” memory for data storage. - Menu with protection password. - LAN connection.

HYDRAULIC CONNECTIONS OF HEAT EXCHANGERS

• The heat exchangers’ threaded hydraulic connections are available up to a diameter of 3 " included, and correspond to ISO 228/1 – G M.

• The hydraulic connections with grooved end (Victaulic) are supplied as standard with Victaulic joint and adapter pipe.

WARNING It is necessary to provide the refrigerant and lubricant oil charge for the connection pipes and for the remote air cooled condenser.


OPTIONAL ACCESSORIES

The descriptions of these additional components can be found in Chapter OPTIONAL ACCESSORIES.

• Remote air cooled condensers with axial fans series TEAM MATE HP • Partial heat recovery system

OTHER OPTIONAL ACCESSORIES

• BRINE kit for chilled water production up to –12°C. WARNING With BRINE Kit it is mandatory to use antifreeze mixture . Refer to the paragraph ANTIFREEZE SOLUTION. The use of antifreeze mixtures causes a reduction of the machine performance, Please refer to the RC WORLD electronic catalogue to obtain the effective performance.

• Rubber supports - not installed. • Power factor capacitor for motor compressor - cosϕ 0,9 excluded T 27 P1 J4 S / T 30 P1 J4

S / T 33 P1 J4 S / T 40 P1 J4 S / T 40 P2 J7 S / T 40 P2 J7 D models. • MP.COM microprocessor control accessories:

- Remote terminal. - Clock card for alarms date and time displaying and storing. - Serial port RCcom, MBUS/JBUS. - Serial port LON. - Serial port BACnet for Ethernet – SNMP – TCP/IP. - Serial port BACnet for MS/TP. - Serial port for GSM modem. - Data logger for the memorization of the intervened alarms. - Additional module with the following inlets / outlets:

INLETS o External alarm 1 o External alarm 2 o Line current indication. o Line voltage indication / Compensation o Ambient air temperature OUTLETS o External alarm 1 o External alarm 2 o General alarm 2 o General alarm 3

- Driver for the additional module.

WARNING It is mandatory to install a water filter on evapora tor water inlet. RC GROUP reserves the right to accept the matching of the optional installed on the unit.


TECHNICAL DATA

MODEL T.27.P1 T.30.P1 T.33.P1 T.40.P1 T.40.P2 T.40.P2 S S S S S D SIZE J4 J4 J4 J4 J7 J7 SUMMER WORKING MODE (1) COOLING CAPACITY kW 23,3 25,4 29,8 35,4 35,4 39,7 Compressors power input kW 8,4 9,9 10,7 12,3 12,0 14,2 Compressors operating current [OA] A 15,5 17,5 19,3 23,4 22,9 26,4 Evaporator water flow rate m³/h 4,0 4,4 5,1 6,1 6,1 6,8 Evaporator pressure drop kPa 41 39 38 30 31 22 WINTER WORKING MODE (2) HEATING CAPACITY kW 27,1 30,2 34,4 41,0 41,0 46,8 Compressors power input kW 8,2 9,1 10,3 12,3 12,3 14,2 Compressors operating current [OA] A 15,2 16,3 18,8 23,3 23,4 26,3 PARTIAL HEAT RECOVERY (3) HEATING CAPACITY kW 8,5 9,3 10,9 13,0 13,0 -- Water flow rate m³/h 1,5 1,6 1,9 2,2 2,2 -- Pressure drop kPa 22,1 26,4 36,2 21,0 21,0 -- COMPRESSORS scroll scroll scroll scroll scroll scroll Quantity n. 1 1 1 1 2 2 Maximum current A 22 25 31 34 42 42 Starting current A 118 118 140 173 132 132 Capacity steps n. 1 1 1 1 2 2 PLANT SIDE EXCHANGER n. 1 1 1 1 1 1 Water volume l 2,8 2,8 2,8 3,1 3,1 3,6 Max water flow m³/h 5,6 6,1 7,2 8,5 8,5 9,6 PARTIAL HEAT RECOVERY EXCHANGER n. 1 1 1 1 1 -- Water volume l 0,4 0,4 0,4 0,6 0,6 -- Max water flow m³/h 2,1 2,3 2,6 3,1 3,1 -- REFRIGERANT (4) R410A R410A R410A R410A R410A R410A Total refrigerant charge (optional excluded) kg 5,6 5,6 5,7 6,2 6,6 10,7 Gas circuit n. 1 1 1 1 1 2 POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFIFICIENCY INDEXES EER – Energy Efficiency Ratio kW/kW 2,61 2,43 2,60 2,65 2,71 2,60 COP – Coefficient of Performance kW/kW 3,11 3,13 3,10 3,06 3,06 3,07 SOUND LEVEL Sound pressure level [Lp] (5) dB(A) 50,0 51,0 52,0 53,0 53,0 53,0 Sound power level [Lw] (6) dB(A) 65,4 66,4 67,4 68,8 68,9 68,9 DIMENSIONS Length mm 1000 1000 1000 1000 1200 1200 Width mm 650 650 650 650 750 750 Height mm 1400 1400 1400 1400 1700 1700 NET WEIGHT kg 247 250 255 290 415 425 REMOTE CONDENSERS Number n. 1 1 1 1 1 2 Series TEAM MATE STD HP Mod. M 35 M 35 M 45 M 50 M 60 M 30 Series TEAM MATE LNO HP Mod. M 45 M 45 M 50 M 70 M 70 M 35 Series TEAM MATE ELN HP Mod. M 45 M 45 M 50 M 70 M 70 M 35 Number n. 1 1 1 1 1 2 Series TEAM MATE STD HP Mod. T 33 T 38 T 44 T 44 T 58 T 33 Series TEAM MATE LNO HP Mod. T 44 T 58 T 58 T 58 T 69 T 38 Series TEAM MATE ELN HP Mod. T 44 T 58 T 58 T 58 T 69 T 38 HYDRAULIC CONNECTIONS PLANT SIDE EXCHANGER Inlet / outlet – ISO228/1-G M Ø 1 1/2" 1 1/2" 1 1/2" 2" 2" 2" Inlet / outlet – Victaulic - OD Ø mm -- -- -- -- -- -- PARTIAL HEAT RECOVERY Inlet / outlet – ISO228/1-G M Ø 1" 1" 1" 1" 1" -- REFRIGERANT CONNECTIONS Liquid return - ODS n x Ø 16 16 16 16 16 2 x 16 Gas delivery - ODS n x Ø 28 28 28 28 28 2 x 22

1. Referred to chilled water temperature 12/7°C; 35°C ambient temperature. 2. Referred to hot water outlet temperature 45°C; 7°C ambient temperature. 3. Referred to recovery hot water temperature 40/45°C. 4. Refrigerant charge only for the chiller. It is necessary to provide the refrigerant charge for the connection pipes and for the remote air

cooled condenser. 5. Sound pressure level [Lp] 1m far according to ISO EN 3744 6. Sound power level [Lw] according to ISO EN 9614 - 2.


TECHNICAL DATA

MODEL T.48.P2 T.48.P2 T.54.P2 T.54.P2 T.60.P2 T.60.P2 S D S D S D SIZE J7 J7 J7 J7 J7 J7 SUMMER WORKING MODE (1) COOLING CAPACITY kW 47,2 46,5 55,8 51,0 59,1 58,5 Compressors power input kW 16,8 16,7 17,9 19,7 20,9 21,2 Compressors operating current [OA] A 31,0 30,9 32,2 34,9 38,1 38,5 Evaporator water flow rate m³/h 8,1 8,0 9,6 8,8 10,2 10,1 Evaporator pressure drop kPa 37 22 41 20 35 22 WINTER WORKING MODE (2) HEATING CAPACITY kW 56,0 55,1 65,4 61,3 68,9 68,8 Compressors power input kW 16,9 16,5 19,1 18,7 21,1 20,7 Compressors operating current [OA] A 31,2 30,6 33,9 33,3 38,4 37,8 PARTIAL HEAT RECOVERY (3) HEATING CAPACITY kW 17,3 -- 20,5 -- 21,7 -- Water flow rate m³/h 3,0 -- 3,5 -- 3,7 -- Pressure drop kPa 37,3 -- 32,8 -- 36,8 -- COMPRESSORS scroll scroll scroll scroll scroll scroll Quantity n. 2 2 2 2 2 2 Maximum current A 44 44 50 50 62 62 Starting current A 140 140 143 143 171 171 Capacity steps n. 2 2 2 2 2 2 PLANT SIDE EXCHANGER n. 1 1 1 1 1 1 Water volume l 3,1 4,2 3,9 4,2 3,9 4,2 Max water flow m³/h 11,4 11,2 13,4 12,3 14,3 14,1 PARTIAL HEAT RECOVERY EXCHANGER n. 1 -- 1 -- 1 -- Water volume l 0,6 -- 0,8 -- 0,8 -- Max water flow m³/h 4,2 -- 4,9 -- 5,2 -- REFRIGERANT (4) R410A R410A R410A R410A R410A R410A Total refrigerant charge (optional excluded) kg 9,3 11,1 10,4 11,2 10,4 11,2 Gas circuit n. 1 2 1 2 1 2 POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFIFICIENCY INDEXES EER – Energy Efficiency Ratio kW/kW 2,64 2,62 2,86 2,46 2,63 2,57 COP – Coefficient of Performance kW/kW 3,11 3,14 3,16 3,10 3,04 3,09 SOUND LEVEL Sound pressure level [Lp] (5) dB(A) 53,0 53,0 54,0 54,0 55,0 55,0 Sound power level [Lw] (6) dB(A) 68,9 68,9 69,9 69,9 70,9 70,9 DIMENSIONS Length mm 1200 1200 1200 1200 1200 1200 Width mm 750 750 750 750 750 750 Height mm 1700 1700 1700 1700 1700 1700 NET WEIGHT kg 425 433 430 440 432 452 REMOTE CONDENSERS Number n. 1 2 1 2 1 2 Series TEAM MATE STD HP Mod. M 70 M 35 M 95 M 35 M 95 M 45 Series TEAM MATE LNO HP Mod. M 95 M 45 M 95 M 45 M 110 M 50 Series TEAM MATE ELN HP Mod. M 95 M 45 M 95 M 45 M 110 M 50 Number n. 1 2 1 2 1 2 Series TEAM MATE STD HP Mod. T 69 T 33 T 86 T 38 T 86 T 44 Series TEAM MATE LNO HP Mod. T 86 T 44 T 114 T 58 T 114 T 58 Series TEAM MATE ELN HP Mod. T 86 T 44 T 114 T 58 T 114 T 58 HYDRAULIC CONNECTIONS PLANT SIDE EXCHANGER Inlet / outlet – ISO228/1-G M Ø 2" 2" 2" 2" 2" 2" Inlet / outlet – Victaulic - OD Ø mm -- -- -- -- -- -- PARTIAL HEAT RECOVERY Inlet / outlet – ISO228/1-G M Ø 1" -- 1" -- 1" -- REFRIGERANT CONNECTIONS Liquid return - ODS n x Ø 22 2 x 16 22 2 x 16 22 2 x 16 Gas delivery - ODS n x Ø 28 2 x 22 35 2 x 28 42 2 x 28




TECHNICAL DATA

MODEL T.70.P2 T.70.P2 T.90.P2 T.90.P2 T.120.P2 T.120.P2 S D S D S D SIZE J7 J7 J7 J7 J7 J7 SUMMER WORKING MODE (1) COOLING CAPACITY kW 68,4 70,5 89,1 90,8 115,0 114,0 Compressors power input kW 25,5 24,6 32,6 31,7 39,1 39,1 Compressors operating current [OA] A 48,1 46,7 56,7 55,5 68,0 67,9 Evaporator water flow rate m³/h 11,8 12,1 15,3 15,6 19,8 19,6 Evaporator pressure drop kPa 39 22 35 22 39 31 WINTER WORKING MODE (2) HEATING CAPACITY kW 80,8 82,2 105,0 107,0 135,0 136,0 Compressors power input kW 24,8 24,1 31,8 31,2 40,3 39,8 Compressors operating current [OA] A 47,0 46,1 55,7 54,9 69,4 68,9 PARTIAL HEAT RECOVERY (3) HEATING CAPACITY kW 25,1 -- 32,7 -- 42,3 -- Water flow rate m³/h 4,3 -- 5,6 -- 7,3 -- Pressure drop kPa 38,4 -- 47,6 -- 48,2 -- COMPRESSORS scroll scroll scroll scroll scroll scroll Quantity n. 2 2 2 2 2 2 Maximum current A 68 68 80 80 97 97 Starting current A 207 207 265 265 321 321 Capacity steps n. 2 2 2 2 2 2 PLANT SIDE EXCHANGER n. 1 1 1 1 1 1 Water volume l 4,7 6,4 5,8 6,7 7,2 8,3 Max water flow m³/h 16,5 16,9 21,4 21,8 27,7 27,4 PARTIAL HEAT RECOVERY EXCHANGER n. 1 -- 1 -- 1 -- Water volume l 1,0 -- 1,7 -- 2,1 -- Max water flow m³/h 6,1 -- 7,9 -- 10,2 -- REFRIGERANT (4) R410A R410A R410A R410A R410A R410A Total refrigerant charge (optional excluded) kg 10,9 12,6 15,7 20,2 23,4 28,2 Gas circuit n. 1 2 1 2 1 2 POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFIFICIENCY INDEXES EER – Energy Efficiency Ratio kW/kW 2,52 2,63 2,57 2,68 2,72 2,70 COP – Coefficient of Performance kW/kW 3,06 3,13 3,10 3,21 3,10 3,16 SOUND LEVEL Sound pressure level [Lp] (5) dB(A) 56,0 56,0 61,0 61,0 64,0 64,0 Sound power level [Lw] (6) dB(A) 71,9 71,9 76,9 76,9 80,1 80,1 DIMENSIONS Length mm 1200 1200 1200 1200 1200 1200 Width mm 750 750 750 750 750 750 Height mm 1700 1700 1700 1700 1700 1700 NET WEIGHT kg 435 460 675 705 725 737 REMOTE CONDENSERS Number n. 1 2 1 2 1 2 Series TEAM MATE STD HP Mod. M 95 M 50 M 130 M 70 T 185 M 95 Series TEAM MATE LNO HP Mod. M 130 M 60 T 185 M 95 T 210 M 110 Series TEAM MATE ELN HP Mod. M 130 M 60 T 185 M 95 T 210 M 110 Number n. 1 2 1 2 1 2 Series TEAM MATE STD HP Mod. T 114 T 44 T 144 T 69 T 144 T 86 Series TEAM MATE LNO HP Mod. T 144 T 58 T 144 T 86 -- T 114 Series TEAM MATE ELN HP Mod. T 144 T 58 T 144 T 86 -- T 114 HYDRAULIC CONNECTIONS PLANT SIDE EXCHANGER Inlet / outlet – ISO228/1-G M Ø 2" 2" -- -- -- -- Inlet / outlet – Victaulic - OD Ø mm -- -- 73 73 73 73 PARTIAL HEAT RECOVERY Inlet / outlet – ISO228/1-G M Ø 1" -- 1 1/4" -- 1 1/4" -- REFRIGERANT CONNECTIONS Liquid return - ODS n x Ø 22 2 x 16 22 2 x 22 28 2 x 22 Gas delivery - ODS n x Ø 42 2 x 28 42 2 x 28 42 2 x 35




TECHNICAL DATA

MODEL T.150.P2 T.150.P2 T.170.P4 T.190.P4 T.200.P2 T.200.P2 S D D D S D SIZE J8 J8 J8 J9 J9 J9 SUMMER WORKING MODE (1) COOLING CAPACITY kW 146,0 144,0 170,0 187,0 185,0 185,0 Compressors power input kW 51,6 52,0 56,8 66,3 66,6 67,5 Compressors operating current [OA] A 88,3 89,0 103,0 115,0 114,0 115,0 Evaporator water flow rate m³/h 25,2 24,7 29,2 32,1 31,8 31,7 Evaporator pressure drop kPa 36 32 33 25 34 38 WINTER WORKING MODE (2) HEATING CAPACITY kW 174,0 173,0 191,0 210,0 219,0 218,0 Compressors power input kW 51,3 50,9 55,9 63,5 63,4 63,7 Compressors operating current [OA] A 87,9 87,4 102,0 111,0 109,0 110,0 PARTIAL HEAT RECOVERY (3) HEATING CAPACITY kW 53,8 52,7 62,4 68,5 67,9 67,8 Water flow rate m³/h 9,3 9,1 10,8 11,8 11,7 11,7 Pressure drop kPa 43,8 27,2 38,2 31,0 38,3 30,3 COMPRESSORS scroll scroll scroll scroll scroll scroll Quantity n. 2 2 4 4 2 2 Maximum current A 131 131 148 160 164 164 Starting current A 375 375 333 345 466 466 Capacity steps n. 2 2 4 4 2 2 PLANT SIDE EXCHANGER n. 1 1 1 1 1 1 Water volume l 8,7 12,3 12,3 20,3 20,7 20,3 Max water flow m³/h 35,3 34,6 40,9 44,9 44,5 44,4 PARTIAL HEAT RECOVERY EXCHANGER n. 1 2 2 2 1 2 Water volume l 4,0 2,0 3,4 3,4 5,3 3,4 Max water flow m³/h 13,0 12,7 15,1 16,5 16,4 16,4 REFRIGERANT (4) R410A R410A R410A R410A R410A R410A Total refrigerant charge (optional excluded) kg 24,5 30,7 31,4 35,3 30,4 34,2 Gas circuit n. 1 2 2 2 1 2 POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFIFICIENCY INDEXES EER – Energy Efficiency Ratio kW/kW 2,67 2,61 2,79 2,65 2,61 2,58 COP – Coefficient of Performance kW/kW 3,19 3,20 3,18 3,10 3,24 3,21 SOUND LEVEL Sound pressure level [Lp] (5) dB(A) 64,0 64,0 64,0 64,0 64,0 64,0 Sound power level [Lw] (6) dB(A) 81,0 81,0 81,0 81,0 81,0 81,0 DIMENSIONS Length mm 1800 1800 1800 1800 1800 1800 Width mm 1200 1200 1200 1200 1200 1200 Height mm 1740 1740 1740 1740 1740 1740 NET WEIGHT kg 950 965 1065 1035 1000 1035 REMOTE CONDENSERS Number n. 1 2 2 2 1 2 Series TEAM MATE STD HP Mod. T 210 M 110 M 130 M 130 T 250 M 130 Series TEAM MATE LNO HP Mod. T 250 M 140 M 140 T 185 T 280 T 185 Series TEAM MATE ELN HP Mod. T 250 M 140 M 140 T 185 T 280 T 185 Number n. -- 2 2 2 -- 2 Series TEAM MATE STD HP Mod. -- T 114 T 114 T 144 -- T 144 Series TEAM MATE LNO HP Mod. -- T 144 T 144 T 144 -- -- Series TEAM MATE ELN HP Mod. -- T 144 T 144 T 144 -- -- HYDRAULIC CONNECTIONS PLANT SIDE EXCHANGER Inlet / outlet – ISO228/1-G M Ø -- -- -- -- -- -- Inlet / outlet – Victaulic - OD Ø mm 73 73 73 88,9 88,9 88,9 PARTIAL HEAT RECOVERY Inlet / outlet – ISO228/1-G M Ø 2" 2 x 1" 2 x 1 1/4" 2 x 1 1/4" 2" 2 x 1 1/4" REFRIGERANT CONNECTIONS Liquid return - ODS n x Ø 35 2 x 22 2 x 28 2 x 28 35 2 x 28 Gas delivery - ODS n x Ø 54 2 x 35 2 x 42 2 x 42 54 2 x 42




TECHNICAL DATA

MODEL T.240.P4 T.300.P4 T.340.P4 T.380.P4 D D D D SIZE J9 J9 J10 J10 SUMMER WORKING MODE (1) COOLING CAPACITY kW 233,0 287,0 336,0 365,0 Compressors power input kW 78,4 103,0 115,0 133,0 Compressors operating current [OA] A 136,0 177,0 198,0 228,0 Evaporator water flow rate m³/h 40,1 49,4 57,8 62,7 Evaporator pressure drop kPa 49 53 54 48 WINTER WORKING MODE (2) HEATING CAPACITY kW 272,0 341,0 397,0 432,0 Compressors power input kW 79,1 102,0 115,0 128,0 Compressors operating current [OA] A 137,0 175,0 198,0 221,0 PARTIAL HEAT RECOVERY (3 ) HEATING CAPACITY kW 85,6 105,0 123,0 134,0 Water flow rate m³/h 14,7 18,2 21,3 23,1 Pressure drop kPa 33,4 39,2 53,8 37,2 COMPRESSORS scroll scroll scroll scroll Quantity n. 4 4 4 4 Maximum current A 246 262 295 328 Starting current A 584 507 597 630 Capacity steps n. 4 4 4 4 PLANT SIDE EXCHANGER n. 1 1 1 1 Water volume l 20,3 27,5 33,8 44,6 Max water flow m³/h 56,1 69,2 80,9 87,8 PARTIAL HEAT RECOVERY EXCHANGER n. 2 2 2 2 Water volume l 4,2 8,0 8,0 10,6 Max water flow m³/h 20,6 25,5 29,8 32,3 REFRIGERANT (4) R410A R410A R410A R410A Total refrigerant charge (optional excluded) kg 36,1 52,9 53,5 86,7 Gas circuit n. 2 2 2 2 POWER SUPPLY V/Ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 ENERGY EFFIFICIENCY INDEXES EER – Energy Efficiency Ratio kW/kW 2,75 2,62 2,72 2,58 COP – Coefficient of Performance kW/kW 3,18 3,15 3,22 3,17 SOUND LEVEL Sound pressure level [Lp] (5) dB(A) 67,0 67,0 67,0 67,0 Sound power level [Lw] (6) dB(A) 84,1 84,1 84,5 84,5 DIMENSIONS Length mm 1800 1800 1800 1800 Width mm 1200 1200 1800 1800 Height mm 1740 1740 1740 1740 NET WEIGHT kg 1452 1477 1555 1600 REMOTE CONDENSERS Number n. 2 2 2 2 Series TEAM MATE STD HP Mod. T 185 T 210 T 250 T 250 Series TEAM MATE LNO HP Mod. T 210 T 280 T 280 T 280 Series TEAM MATE ELN HP Mod. T 210 T 280 T 280 T 280 Number n. -- -- -- -- Series TEAM MATE STD HP Mod. -- -- -- -- Series TEAM MATE LNO HP Mod. -- -- -- -- Series TEAM MATE ELN HP Mod. -- -- -- -- HYDRAULIC CONNECTIONS PLANT SIDE EXCHANGER Inlet / outlet – ISO228/1-G M Ø -- -- -- -- Inlet / outlet – Victaulic - OD Ø mm 88,9 88,9 88,9 88,9 PARTIAL HEAT RECOVERY Inlet / outlet – ISO228/1-G M Ø 2 x 1 1/4" 2 x 2" 2 x 2" 2 x 2" REFRIGERANT CONNECTIONS Liquid return - ODS n x Ø 2 x 28 2 x 35 2 x 35 2 x 35 Gas delivery - ODS n x Ø 2 x 42 2 x 54 2 x 54 2 x 54




ACOUSTIC DATA

MODEL T 27 P1 S T 30 P1 S T 33 P1 S T 40 P1 S T 40 P2 S T 40 P2 D SIZE J4 J4 J4 J4 J7 J7 Sound power level [Lw] (1) dB(A) 65,4 66,4 67,4 68,8 68,9 68,9 Sound pressure level at 1m [Lp] (2) dB(A) 50,0 51,0 52,0 53,0 53,0 53,0 Sound pressure level at 5m [Lp] (3) dB(A) 39,5 40,5 41,5 42,7 42,8 42,8 Sound pressure level at 10m [Lp] (3) dB(A) 34,0 35,0 36,0 37,3 37,4 37,4

MODEL T 48 P2 S T 48 P2 D T 54 P2 S T 54 P2 D T 60 P2 S T 60 P2 D SIZE J7 J7 J7 J7 J7 J7 Sound power level [Lw] (1) dB(A) 68,9 68,9 69,9 69,9 70,9 70,9 Sound pressure level at 1m [Lp] (2) dB(A) 53,0 53,0 54,0 54,0 55,0 55,0 Sound pressure level at 5m [Lp] (3) dB(A) 42,8 42,8 43,8 43,8 44,8 44,8 Sound pressure level at 10m [Lp] (3) dB(A) 37,4 37,4 38,4 38,4 39,4 39,4

MODEL T 70 P2 S T 70 P2 D T 90 P2 S T 90 P2 D T 120 P2 S T 120 P2 D SIZE J7 J7 J7 J7 J7 J7 Sound power level [Lw] (1) dB(A) 71,9 71,9 76,9 76,9 80,1 80,1 Sound pressure level at 1m [Lp] (2) dB(A) 56,0 56,0 61,0 61,0 64,0 64,0 Sound pressure level at 5m [Lp] (3) dB(A) 45,8 45,8 50,8 50,8 54,0 54,0 Sound pressure level at 10m [Lp] (3) dB(A) 40,4 40,4 45,4 45,4 48,6 48,6

MODEL T 150 P2 S T 150 P2 D T 170 P4 D T 190 P4 D T 200 P2 S T 200 P2 D SIZE J8 J8 J8 J9 J9 J9 Sound power level [Lw] (1) dB(A) 81,0 81,0 81,0 81,0 81,0 81,0 Sound pressure level at 1m [Lp] (2) dB(A) 64,0 64,0 64,0 64,0 64,0 64,0 Sound pressure level at 5m [Lp] (3) dB(A) 54,6 54,6 54,6 54,6 54,6 54,6 Sound pressure level at 10m [Lp] (3) dB(A) 49,4 49,4 49,4 49,4 49,4 49,4

MODEL T 240 P4 D T 300 P4 D T 340 P4 D T 380 P4 D SIZE J9 J9 J10 J10 Sound power level [Lw] (1) dB(A) 84,1 84,1 84,5 84,5 Sound pressure level at 1m [Lp] (2) dB(A) 67,0 67,0 67,0 67,0 Sound pressure level at 5m [Lp] (3) dB(A) 57,6 57,6 57,9 57,9 Sound pressure level at 10m [Lp] (3) dB(A) 52,4 52,4 52,8 52,8

1. Sound power level [Lw] according to ISO EN 9614 - 2. 2. Sound pressure level [Lp] according to ISO EN 3744 3. Sound pressure level [Lp] in free field condition

IMPORTANT For further information about units acoustic data, please refer to “The Noise” bulletin of RC GROUP technical literature.


ELECTRIC DATA

MAXIMUM ELECTRIC ABSORPTION CALCULATION This chapter is showing the maximum electrical absorption calculation of machine, corresponding to extreme working conditions. The involved components are the following:

• Compressors electric motor • Condensers fans electric motors • Water pump electric motor (if present)

The electrical data of the various components are indicated in the relative technical data sheets. EXAMPLE: Calculation for MANTA A HP T 48 P2 J7 S: MAXIMUM ELECTRIC ABSORPTION

• Compressors A 44,0 Maximum electric absorption A 44,0 WARNING The MANTA A HP series, for matching to a remote air cooled condenser, don’t foresee the electrical panel for the remote air cooled condenser. The power supply of the remote air cooled condenser is independent.


1 4 5 4 6 3 2 7 8

M P . C O M g r a p h i c i n t e r f a c e

13:35 - S - nn - 21/01/07

To Ev 07.0°C Ti 12.5°C A L L A R M I

MP.COM: MICROPROCESSOR CONTROL SYSTEM

The MP.COM microprocessor control system is equipped with 8 keys terminal and back lighted graphic display on which all information in different languages or easily identifiable symbols are displayed. The system disposes of a “flash” memory that preserves the information even in absence of power supply.

KEYBOARD FUNCTIONS KEY 1 Switches on/off the unit. KEY 2 Stops the alarm acoustical signal and displays the intervened alarm. KEY 3 Accedes to the parameters of possible units connected in LAN network. LAN connection with 3 wires without additional accessories. It is possible to connect in

network different capacity units and with different number of compressors. KEY 4 Home key – displays the main screen. KEY 5 Accedes to control and visualization menus as:

• Unit working status • Set-points • Alarms reset (protected by password) • Service parameters setting (protected by password) • Intervened alarms history • Setting for main components manual operation (protected by password) • Date and time setting • Setting of communication system for SMS messages dispatch

KEY 6 Scroll the pages inside each menu and decreases the displayed value KEY 7 Scroll the pages inside each menu and increases the displayed value KEY 8 Shift the cursor inside each menu and confirm a parameter insertion REMOTE CONTROLS/ALARMS INLETS 1 External enabling • 2 Cooling xK1 and Cooling xK2 set-point changeover • OUTLETS 1 General alarm 1 •• • remote controls/alarms •• voltage free controls/alarms


OPTIONAL ACCESSORIES – REMOTE AIR COOLED CONDENSER

Remote air cooled condenser series TEAM MATE with horizontal air flow, from coil to fan.

The machines are made with weather resistant materials and suitable for outdoor installation.

Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001. RC Group has been the first Italian company in its segment to get the ISO 9001 in October 13th, 1991 with certificate ICIM 0018. The machines are in full compliance with European Norms 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments.

SERIES IDENTIFICATION

TEAM MATE HP remote air cooled condensers for heat pumps equipped with axial fans. Nominal capacity: 11,9 ÷ 294,0 kW The TEAM MATE HP series is available in 3 versions:

• TEAM MATE HP STD - No air flow and sound level reduction • TEAM MATE HP LNO – Air flow reduction at 85% with consequent sound level reduction. • TEAM MATE HP ELN – Air flow reduction at 70% with further sound level reduction.

TEAM MATE PF remote air cooled condensers for heat pumps equipped with plug fans. Nominal capacity: 11,9 ÷ 147,0 kW The TEAM MATE HP PF series is available in 3 versions:

• TEAM MATE HP PF STD - No air flow and sound level reduction • TEAM MATE HP PF LNO – Air flow reduction at 85% with consequent sound level

reduction. • TEAM MATE HP PF ELN – Air flow reduction at 70% with further sound level reduction.

MAIN COMPONENTS

FRAMEWORK • Base, self supporting frame and panelling in steel plate with protective surfaces treatment in

compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders. • Colour: RAL 9002

FANS SECTION – TEAM MATE • Axial fans with sickle-shaped blades, fan guard and optimized for low noise levels. • External rotor electric motor with stepless variable speed for condensing pressure control. • IP54 enclosure class.

FANS SECTION – TEAM MATE PF

• Centrifugal fans with backward curved blades, single suction and without scroll housings (Plug-fans).

• Brushless type synchronous EC motor with integrated electronic commutated system and continuous variation of the rotation speed. The motor rotation control is obtained with the EC system (Electronic Commutation) that manage the motor according to the 0÷10V proportional signal coming from the microprocessor control.

• Maintenance-free bearings • IP54 enclosure class.

CONDENSING COIL • Heat exchanger coil with internally corrugated copper tubes and high efficiency aluminium

fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allow to optimally combine the following aspects: - Maximum capacity relative to the size of the exchanger. - Minimum charge of refrigerant. - Reduction of the air flow required for the heat exchange.

• Frame in galvanized steel.

TEAM MATE HP

TEAM MATE HP PF


REFRIGERANT CIRCUIT • Thermostatic expansion valve. • Sight glass. • Filter dryer. • Solenoid valve. • Non return valve. • Valves on gas and liquid line for coupling to refrigerant pipe. The condenser is supplied with

nitrogen seal. ELECTRICAL PANEL In accordance with EN60204-1 norms, suitable for outdoor installation, IP54 enclosure class, complete with:

• Terminals for power supply (from network). - 400/3/50+N for models “T” - 230/1/50 for models “M”.

• Terminals for 0÷10V signal for condensing control system (connect to indoor machine). • Terminals for alarm signal (connect to indoor machine). • Fans speed regulator for condensing/evaporating control (only for TEAM MATE with axial

fans).


TECHNICAL DATA - TEAM MATE HP

MODEL M 30 M 35 M 45 M 50 M 60 M 70 M 95

TEAM MATE HP STD

AXIAL FANS n. 1 1 2 2 3 2 4 Air flow m³/h 9500 9100 12000 17000 16000 18000 28200 Operating power input kW 0,5 0,5 0,8 1,1 1,1 1,1 1,6 Max operating current (FLA) A 2,9 2,9 3,6 5,7 5,7 5,7 8,5 SOUND PRESSURELEVEL (1) dB(A) 67,0 67,0 67,4 69,4 69,4 69,4 70,5

TEAM MATE HP LNO

AXIAL FANS n. - 1 2 2 2 2 3 Air flow m³/h - 7735 10200 14450 13600 15300 23970 Operating power input kW - 0,5 0,7 0,9 0,9 0,9 1,4 Max operating current (FLA) A - 2,9 3,6 5,7 5,7 5,7 8,5 SOUND PRESSURELEVEL (1) dB(A) - 63,1 63,6 65,5 65,5 65,5 66,6

TEAM MATE HP ELN

AXIAL FANS n. - 1 2 2 3 3 4 Air flow m³/h - 6370 8400 11900 11200 12600 19740 Operating power input kW - 0,4 0,6 0,8 0,8 0,8 1,1 Max operating current (FLA) A - 2,9 3,6 5,7 5,7 5,7 8,5 SOUND PRESSURELEVEL (1) dB(A) - 58,5 58,9 60,8 60,8 60,8 61,9

COMMON DATA

POWER SUPPLY V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 230/1/50 REFRIGERANT CHARGE (2) kg 3,0 4,0 4,7 4,1 5,5 7,7 8,7 DIMENSIONS

Length mm 1400 1400 1600 1850 1850 2320 3490 Width mm 665 665 665 665 665 665 690 Height mm 1026 1026 1026 1026 1026 1140 1140 NET WEIGHT kg 116 125 158 181 194 222 250

MODEL M 110 M 130 M 140 T 185 T 210 T 250 T280 TEAM MATE HP STD

AXIAL FANS n. 4 4 - 6 6 8 - Air flow m³/h 27200 37800 - 56000 54000 74600 - Operating power input kW 1,6 2,1 - 3,2 3,2 4,2 - Max operating current (FLA) A 8,5 11,4 - 17,1 17,1 22,8 - SOUND PRESSURELEVEL (1) dB(A) 70,5 71,1 - 71,5 71,5 72,2 -

TEAM MATE HP LNO

AXIAL FANS n. 3 4 4 6 6 8 8 Air flow m³/h 23120 32130 30600 47600 45900 63410 61200 Operating power input kW 1,4 1,8 1,8 2,7 2,7 3,6 3,6 Max operating current (FLA) A 8,5 11,4 11,4 17,1 17,1 22,8 22,8 SOUND PRESSURELEVEL (1) dB(A) 66,6 67,2 67,2 67,7 67,7 68,3 68,3

TEAM MATE HP ELN

AXIAL FANS n. 4 4 4 6 6 8 8 Air flow m³/h 19040 26460 25200 39200 37800 52220 50400 Operating power input kW 1,1 1,5 1,5 2,2 2,2 3,0 3,0 Max operating current (FLA) A 8,5 11,4 11,4 17,1 17,1 22,8 22,8 SOUND PRESSURELEVEL (1) dB(A) 61,9 62,5 62,5 63,0 63,0 63,7 63,7 COMMON DATA

POWER SUPPLY V/ph/Hz 230/1/50 230/1/50 230/1/50 400/3/50+N 400/3/50+N 400/3/50+N 400/3/50+N REFRIGERANT CHARGE (2) kg 11,6 11,6 15,4 20,8 27,7 27,7 37,0 DIMENSIONS

Length mm 3490 4540 4540 3490 3490 4540 4540 Width mm 690 690 690 690 690 690 690 Height mm 1140 1140 1140 2215 2215 2215 2215 NET WEIGHT kg 280 330 360 470 520 630 704

1. Sound pressure level [Lp] 1m far according to ISO EN 3744. 2. The condenser is supplied with nitrogen seal. For the refrigerant charge consider, in addition to the

these value, even the refrigerant pipes for the connection to the indoor machine and lubricant oil in 10% ratio of charged refrigerant.


ACOUSTIC DATA – TEAM MATE TEAM MATE HP STD

MODEL M 30 M 35 M 45 M 50 M 60 M 70 M 95 Sound power level [Lw] (1) dB(A) 81,8 81,8 82,4 84,5 84,5 85,0 86,9 Sound pressure level at 1m [Lp] (2) dB(A) 67,0 67,0 67,4 69,4 69,4 69,4 70,5 Sound pressure level at 5m [Lp] (3) dB(A) 56,1 56,1 56,6 58,7 58,7 59,0 60,6 Sound pressure level at 10m [Lp] (3) dB(A) 50,5 50,5 51,1 53,2 53,2 53,6 55,3

MODEL M 110 M 130 M 140 T 185 T 210 T 250 T280 Sound power level [Lw] (1) dB(A) 86,9 88,1 - 88,8 88,8 90,1 - Sound pressure level at 1m [Lp] (2) dB(A) 70,5 71,1 - 71,5 71,5 72,2 - Sound pressure level at 5m [Lp] (3) dB(A) 60,6 61,6 - 62,3 62,3 63,3 - Sound pressure level at 10m [Lp] (3) dB(A) 55,3 56,4 - 57,1 57,1 58,2 -

TEAM MATE HP LNO

MODEL M 30 M 35 M 45 M 50 M 60 M 70 M 95 Sound power level [Lw] (1) dB(A) - 77,9 78,5 80,7 80,7 81,1 83,0 Sound pressure level at 1m [Lp] (2) dB(A) - 63,1 63,6 65,5 65,5 65,5 66,6 Sound pressure level at 5m [Lp] (3) dB(A) - 52,2 52,7 54,8 54,8 55,1 56,7 Sound pressure level at 10m [Lp] (3) dB(A) - 46,6 47,2 49,3 49,3 49,7 51,4

MODEL M 110 M 130 M 140 T 185 T 210 T 250 T280 Sound power level [Lw] (1) dB(A) 83,0 84,2 84,2 84,9 84,9 86,2 86,2 Sound pressure level at 1m [Lp] (2) dB(A) 66,6 67,2 67,2 67,7 67,7 68,3 68,3 Sound pressure level at 5m [Lp] (3) dB(A) 56,7 57,7 57,7 58,4 58,4 59,4 59,4 Sound pressure level at 10m [Lp] (3) dB(A) 51,4 52,5 52,5 53,2 53,2 54,3 54,3

TEAM MATE HP ELN

MODEL M 30 M 35 M 45 M 50 M 60 M 70 M 95 Sound power level [Lw] (1) dB(A) - 73,3 73,9 76,0 76,0 76,5 78,4 Sound pressure level at 1m [Lp] (2) dB(A) - 58,5 58,9 60,8 60,8 60,8 61,9 Sound pressure level at 5m [Lp] (3) dB(A) - 47,5 48,1 50,2 50,2 50,5 52,1 Sound pressure level at 10m [Lp] (3) dB(A) - 42,0 42,6 44,7 44,7 45,1 46,8

MODEL M 110 M 130 M 140 T 185 T 210 T 250 T280 Sound power level [Lw] (1) dB(A) 78,4 79,6 79,6 80,3 80,3 81,5 81,5 Sound pressure level at 1m [Lp] (2) dB(A) 61,9 62,5 62,5 63,0 63,0 63,7 63,7 Sound pressure level at 5m [Lp] (3) dB(A) 52,1 53,1 53,1 53,7 53,7 54,8 54,8 Sound pressure level at 10m [Lp] (3) dB(A) 46,8 47,9 47,9 48,5 48,5 49,7 49,7

1. Sound power level [Lw] according to ISO EN 9614 - 2. 2. Sound pressure level [Lp] according to ISO EN 3744 3. Sound pressure level [Lp] in free field contition



TECHNICAL DATA – TEAM MATE HP PF

MODEL T 33 T 38 T 44 T 58 T 69 T 86 T 114 T144

TEAM MATE HP PF STD

PLUG FANS n. 1 1 1 2 2 3 4 4 Air flow m³/h 8000 10000 10000 16000 16000 24000 28000 36000 External static pressure Pa 50 50 50 50 50 50 50 50 Max esternal static pressure Pa 474 298 268 552 512 542 204 237 Operating power input kW 1,3 1,1 1,2 2,2 2,4 3,3 5,6 7,4 Plate current (FLA) A 4,3 3,6 3,6 8,6 8,6 12,9 12,9 17,2 SOUND PRESSURELEVEL (1) dB(A) 72,0 71,1 71,3 77,3 77,4 80,3 83,7 84,5

TEAM MATE HP PF LNO

PLUG FANS n. - 1 1 2 2 3 3 4 Air flow m³/h - 8500 8500 13600 13600 20400 23800 30600 External static pressure Pa - 50 50 50 50 50 50 50 Max esternal static pressure Pa - 298 268 552 512 542 204 237 Operating power input kW - 0,74 0,80 1,40 1,51 2,15 3,57 4,69 Plate current (FLA) A - 3,6 3,6 8,6 8,6 12,9 12,9 17,2 SOUND PRESSURELEVEL (1) dB(A) - 67,2 67,4 73,4 73,5 76,4 79,8 80,6

TEAM MATE HP PF ELN

PLUG FANS n. - 1 1 2 2 3 3 4 Air flow m³/h - 7000 7000 11200 11200 16800 19600 25200 External static pressure Pa - 50 50 50 50 50 50 50 Max esternal static pressure Pa - 298 268 552 512 542 204 237 Operating power input kW - 0,49 0,48 0,84 0,92 1,29 2,10 1,44 Plate current (FLA) A - 3,6 3,6 8,6 8,6 12,9 12,9 17,2 SOUND PRESSURELEVEL (1) dB(A) - 62,6 62,8 68,8 68,9 71,8 75,2 76,0

COMMON DATA

POWER SUPPLY V/ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 REFRIGERANT CHARGE (2) kg 3,8 4,3 6,4 5,9 8,8 10,2 10,3 14,0 DIMENSIONS

Length mm 1190 1390 1390 1840 1840 2290 2290 1840 Width mm 880 880 880 880 880 880 880 880 Height mm 900 1300 1300 1300 1300 1300 1300 1800 NET WEIGHT kg 230 292 318 397 431 529 571 689

1. Sound pressure level [Lp] according to ISO EN 3744 2. The condenser is supplied with nitrogen seal. For the refrigerant charge consider, in addition to the

these value, even the refrigerant pipes for the connection to the indoor machine and lubricant oil in 10% ratio of charged refrigerant.


ACOUSTIC DATA – TEAM MATE HP PF TEAM MATE HP PF STD

MODEL T 33 T 38 T 44 T 58 T 69 T 86 T 114 T144 Sound power level [Lw] (1) dB(A) 87,4 86,6 86,8 93,4 93,5 96,9 100,3 101,4 Sound pressure level at 1m [Lp] (2) dB(A) 72,0 71,1 71,3 77,3 77,4 80,3 83,7 84,5 Sound pressure level at 5m [Lp] (3) dB(A) 61,4 60,7 60,9 67,2 67,3 70,6 74,0 75,0 Sound pressure level at 10m [Lp] (3) dB(A) 56,0 55,2 55,4 61,9 62,0 65,3 68,7 69,7

TEAM MATE HP PF LNO

MODEL T 33 T 38 T 44 T 58 T 69 T 86 T 114 T144 Sound power level [Lw] (1) dB(A) - 82,7 82,9 89,5 89,6 93,0 96,4 97,5 Sound pressure level at 1m [Lp] (2) dB(A) - 67,2 67,4 73,4 73,5 76,4 79,8 80,6 Sound pressure level at 5m [Lp] (3) dB(A) - 56,8 57,0 63,4 63,5 66,7 70,1 71,1 Sound pressure level at 10m [Lp] (3) dB(A) - 51,3 51,5 58,0 58,1 61,4 64,8 65,8

TEAM MATE HP PF ELN

MODEL T 33 T 38 T 44 T 58 T 69 T 86 T 114 T144 Sound power level [Lw] (1) dB(A) - 78,1 78,3 84,8 84,9 88,3 91,7 92,9 Sound pressure level at 1m [Lp] (2) dB(A) - 62,6 62,8 68,8 68,9 71,8 75,2 76,0 Sound pressure level at 5m [Lp] (3) dB(A) - 52,2 52,4 58,7 58,8 62,1 65,5 66,5 Sound pressure level at 10m [Lp] (3) dB(A) - 46,7 46,9 53,3 53,4 56,8 60,2 61,2

1. Sound power level [Lw] according to ISO EN 9614 - 2. 2. Sound pressure level [Lp] according to ISO EN 3744 3. Sound pressure level [Lp] in free field condition



RU1

COM1

SC1 SC2

RU2

COM2

OPTIONAL ACCESSORIES - PARTIAL HEAT RECOVERY SYSTEM

The partial heat recovery exchangers are installed on every refrigerant circuit of the machine before the main condenser. The system is not regulated and the control is ON-OFF type. The heat recovery system’s operation is subject to the supply demand of cooling capacity. The system includes:

• Copper brazed plate type heat exchanger with cover plates, plates and connections in AISI 316 stainless steel.

• Anticondensate insulation made of polyurethane. • Hydraulic piping. In the machines with two refrigerant circuits the parallel connection of the

hydraulic circuit is at Customer care.

The heating capacity which is supplied depends on the kind of refrigerant gas which is used and working temperatures. The heat exchangers can produce hot water up to the maximum temperature of 70÷75°C and according to the working conditions of the unit.

PARTIAL HEAT RECOVERY

COM Compressor RU Valve

SC Partial heat recovery exchanger A Main condenser

HEAT RECOVERY HYDRAULIC CIRCUIT

SUCTION LINE

TO THE REVERSING VALVE

LIQUID LINE

TO THE REVERSING VALVE


MACHINE DRAWINGS Dimensions in mm SIZE J4 S mod. T.27.P1, T.30.P1, T.33.P1


MACHINE DRAWINGS Dimensions in mm SIZE J4 S mod. T.40.P1


MACHINE DRAWINGS Dimensions in mm SIZE J7 S


MACHINE DRAWINGS Dimensions in mm SIZE J7 D




MACHINE DRAWINGS Dimensions in mm SIZE J8 D mod. T.150.P2




MACHINE DRAWINGS Dimensions in mm SIZE J9 D mod. T.190.P4, T.240.P4








MACHINE DRAWINGS Dimensions in mm SIZE J10 D mod. T.340.P4, T.380.P4


TYPICAL INSTALLATION DIAGRAM FOR MACHINES WITH REMOTE AIR COOLED

CONDENSER

WARNING It is necessary to provide the refrigerant charge for the connection pipes and for the remote air cooled condenser. Charge refrigerant in the suitable quantity and lubricant oil in 10% ratio of charged refrigerant. Lubricant oil must be the same type as the charged one as shown on the compressor plate.

1) Chiller 2) Remote air cooled condenser 3) Gas discharge line 4) Liquid return line 5) Trap. Foresee a trap every 5m of the rising pipe. 6) Additional liquid receiver external to the chiller with cocks and safety valve.

Suggested part for refrigerant line longer than 25-30m Install the liquid receiver close to the chiller.

7) Double expansion valve. THIS DIAGRAM APPLIES TO EACH REFRIGERANT CIRCUIT OF THE UNIT.


TYPICAL INSTALLATION DIAGRAM FOR MACHINES WITH REMOTE AIR COOLED CONDENSER

WARNING It is necessary to provide the refrigerant charge for the connection pipes and for the remote air cooled condenser. Charge refrigerant in the suitable quantity and lubricant oil in 10% ratio of charged refrigerant. Lubricant oil must be the same type as the charged one as shown on the compressor plate.

1) Chiller 2) Remote air cooled condenser 3) Gas discharge line 4) Liquid return line 5) Trap. Foresee a trap every 5m of the rising pipe. 6) Additional liquid receiver external to the chiller with cocks and safety valve.

Suggested part for refrigerant line longer than 25-30m Install the liquid receiver close to the chiller.

7) Double expansion valve. THIS DIAGRAM APPLIES TO EACH REFRIGERANT CIRCUIT OF THE UNIT.


The continuous improvement of products may imply changes in the data shown in this catalogue.

RC GROUP S.p.A. • Via Roma, 5 • 27010 Valle Salimbene (PV), Italy www.rcgroup.it • Tel. +39 (0) 382 433 811 • Fax +39 (0) 382 587 148

T_MNTAHP_1012_GB

Documents

T MNTAHP 1012 GB - Tecna - Inicio · RC GROUP S.p.A. T_MNTAHP_1012_GB R410A 3 GENERAL CHARACTERISTICS ... (Victaulic) are supplied as standard with Victaulic joint and adapter pipe