LATE MODEL CNC MACHINING EQUIPMENTBY MAKINO, OKUMA, MAZAK, HAAS AND

OTHER AUTOMOTIVE MANUFACTURING EQUIPMENT

LATE MODEL CNC MACHINING EQUIPMENTBY MAKINO, OKUMA, MAZAK, HAAS AND

OTHER AUTOMOTIVE MANUFACTURING EQUIPMENT

(2) Makino Model A71 Four-Axis Two-Pallet CNC Horizontal MachiningCenters

Overall View Makino A88 (3) Machine FMS Cell w/ 8-Pallet RoboticLoading System

60” Monarch Model VLN-14 67X63.6 Two-Pallet CNC VTL Miroku Model MEG-1000NC CNC Knee TypeGun Drill

Michigan Tool Model 4085 Roto-Flo SplineRolling Machine

11.8” X 23.6” Shigiya Model GPS-30.60 CNCCylindrical Grinder

Mazak Model HTC-400 Two-Pallet CNCHorizontal Machining Center

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF

SALE DATE:Thursday,

August 11thStarting at 1:00 PM

NEW2002/2003

NEW11/1996

NEW2000

NEW2001

Featuring: (2) Makino A71 CNC HMC’s Loaded w/ Options (2003),Makino FMS System w/ (3) Makino A88 CNC HMC’s and WSS 8-Pallet

Robot System (2001), 60” Monarch Two- Pallet CNC VTL (1996),(2) Michigan Tool Co. Roto-Flow Spline Rollers, Mazak OT-10 & QT-20CNC Turning Centers, (4) Mazak H-400 CNC HMC’s, HAAS VF-4 & VF-3

CNC VMC’s, (2) HAAS HMC’s. (3) Shigiya GPS-30 CNC CylindricalGrinders (2000), Mitsubishi RD-23-11 CNC Angle Head Grinder (1995),Miroku MEG-1000 CNC Gun Drill, (3) Hardinge Conquest VT-200 CNC

VTC’s, Gardener Denver Disc Grinder, Misc. Machinery andAutomotive Manufacturing Equipment

FAXON MACHINING, INC.

INSPECTION:Wed., August 10th

10:00 AM to 4:00 PM

FAXON MACHINING, INC.11101 Adwood Drive – Cincinnati, Ohio 45240

20 Miles Northeast of Downtown off I-275

www.cia-auction.comFeatures:Upcoming Sale InformationLiquidation & Equipment SectionEmail Auction NotificationRecent Auction ResultsLot Catalog ListingsPhoto GalleriesDownloadable FormsComplete Terms of SaleStaff ProfilesReference Information

SURPLUS TO THE ONGOING OPERATIONS OF

Select Items To Be Offered Online

See Instructions on Page 3

To Become a Qualified Bidder on the Internet

1134800B CIA Faxon Machining-6 7/8/11 8:54 AM Page 3

THURSDAY, AUGUST 11THTHURSDAY, AUGUST 11TH

Overall View Makino A88 (3) Machine FMS Cell w/ 8-Pallet Robotic Loading System

(2) Makino Model A71 Four-Axis Two-Pallet CNC Horizontal Machining Centers Various Views Makino A71 CNC HMC’s

60” Monarch Model VLN-14 67X63.6 Two-Pallet CNC VTL

Makino Model WSS Eight-Pallet Robotic Pallet LoadingSystem

CNC VTL60” Monarch Model VLN-14 67X63.6 Two-Pallet CNCVTL; S/N T-53088NC, Fanuc 15TT CNC Control, (2) 57” Dia. 4-Jaw Chucks, 5-Pos. Turret Head, CNC Side Head, 67” Max.Swing, 66.1” Max. Height Under Cross Rail, 59.3” Max. TurningDiameter With Side Head, 10.5” Min. Turning Diameter With SideHead, 30” Vertical Travel, 63.6” Horizontal Travel, Chuck Speeds:2.7 - 88 Rpm Low, 9.8 - 235 Rpm High, 75 HP Main Drive Motor,Offload Pallet Station, Set Up Pallet Station, Hydraulic System,Coolant System, Chip Conveyor (New 11/1996) SEE PHOTO

(3) MAKINO A88 HMC FMS CELLCell Will Be Sold Separate and Overall, Highest Bids or

Bid to Prevail(3) Makino Model A88E Four-Axis Two-Pallet CNCHorizontal Machining Centers; S/N 01-274, 01-273, 01-285,Makino Professional 3 Control, 24-3/4” X 24-3/4” T-Slotted Pallets,Full 4th Axis .001 Degree Pallet Rotation, 31” X-Axis, 29” Y-Axis,31” Z-Axis, No. 50 Taper Spindle, Spindle Speeds to 10,000 RPM,90-Position ATC, Thru Spindle Coolant, Balcrank Cutting EdgeSystems Coolant System w/ Twin Micron Filters, Chip Conveyor,Kento Seiki Oilmatic Oil Temperature Controller, SMC Air Dryer,Mist Buster II Mist Collector (New 2001) SEE PHOTOMakino Model WSS Eight-Pallet Robotic Pallet LoadingSystem; (8) Pallet Storage Positions or Stations, (2) Pallet LoaderStations set up for 24-3/4” X 24-3/4” Pallets and (3) Machine Cell

NEW2001

NEW2002/2003

NEW11/1996

1134800B CIA Faxon Machining-6 7/8/11 8:54 AM Page 4

FAXON MACHINING, INC.FAXON MACHINING, INC.

Haas Model HS-1 Two-Pallet CNCHorizontal Machining Center

MAKINO A71 CNC HMC’S(2) Makino Model A71 Four-Axis Two-PalletCNC Horizontal Machining Centers; S/N 03-92 &02-18, Makino Pro 3 Control, (2) 19-3/4” X 19-3/4” T-Slotted Pallets, Full 4th Axis .001 Degree Pallet Rotation,28” X-Axis, 28” Y-Axis, 31” Z-Axis, Spindle Speeds to10,000 RPM, 60-Position ATC, No. 50 Taper Spindle,High Pressure Coolant Thru Spindle, Chip Conveyor,Oilmatic Automatic Oil Temperature Controller, MicronOil Filter System, Air Dryer (New 2002/2003)

SEE PHOTO

CNC GUN DRILLMiroku Model MEG-1000NC CNC Knee TypeGun Drill; S/N MS413, Fanuc O Series CNC Control,54” X 34” T-Slotted Table, 1” Dia. Capacity, 60” Stroke,(2) Work Rest Supports, Coolant System w/ Tanks, Filtersand 10 HP Pump, Appears to be very Low Hour Machine(New 1993) SEE PHOTO

MAZAK CNC HMC’SMazak Model HTC-400 Two-Pallet CNCHorizontal Machining Center; S/N 121314, Mazak

Mazatrol M Plus Control, 15-3/4” X 15-3/4” T-SlottedPallets, Full 4th Axis .001 Degree Pallet Rotation, 22” X-Axis, 20” Y-Axis, 20” Z-Axis, Spindle Speeds to 10,000RPM, No. 40 Taper Spindle, Coolant Thru Spindle, ChipConveyor (New 5/1996) SEE PHOTO

(2) Mazak Model H-400N / AL Two-Pallet CNCHorizontal Machining Centers; S/N 110127(2/1994) & S/N 116933 (6/1995), Mazatrol M-32Control, 15-3/4” X 15-3/4” T-Slotted Pallets, Full 4th Axis.001 Degree Pallet Rotation, 22.1” X-Axis, 20” Y-Axis, 20”Z-Axis, No. 40 Taper Spindle, Coolant Thru Spindle,High Pressure Overhead Flood Coolant, Chip Conveyor(New 1994/1995) SEE PHOTO

HAAS CNC HMCHaas Model HS-1 Two-Pallet CNC HorizontalMachining Center; S/N 50200, Haas CNC Control, (2)16” X 16” Drilled and Tapped Pallets, No. 40 TaperSpindle, 24-Pos. Automatic Tool Changer, 15 HP HighTorque Spindle, 710 IPM Brushless Servo Drives, ChipConveyor, Coolant System (New 1996) SEE PHOTO

(3) Makino Model A88E Four-Axis Two-Pallet CNC Horizontal Machining Centers

NEW2001

WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction

at www.bidspotter.com at least 48-Hours Priorto the Sale Date, if you do not you will not beapproved.

➢ All Internet bidders must Post a Deposit of Approx.25% of Your Planned Spending Budget or $5,000Minimum with Cincinnati Industrial Auctioneers inOrder to be approved to Bid. Those who do NotPost the Deposit Will Not be Approved. Period.

➢ Only Major Items Will be Available for Online Bidding. Please refer to the Listing on www.bidspotter.com for Available Online Items.

➢ There is a 15% Buyer’s Premium in Effect for AllOnline Purchases.

➢ We Highly Recommend that Potential BuyersAttend this Auction & Bid Live Onsite. This willgive you the Ability to Inspect the Items & FullyAppreciate Their Condition, Along with SavingYou 3% of the Buyer’s Premium.

No Last Minute Registrations will be accepted. MakeSure to Register & Post Your Deposit No Later than48-Hours Prior to the Start of the Auction.

PLEASE READ THE IMPORTANTAUCTION INFORMATION BOX

ON PAGE 5

Miroku Model MEG-1000NC CNC Knee Type Gun Drill

Haas Model VF-4 Three Axis CNC Vertical Machining Center

(2) Mazak Model H-400N / ALTwo-Pallet CNC HorizontalMachining Centers

Mazak Model HTC-400 Two-Pallet CNC Horizontal MachiningCenter

NEW1994/1995

NEW1996

NEW1996

LOWHOURS

1134800B CIA Faxon Machining-6 7/8/11 8:54 AM Page 5

THURSDAY, AUGUST 11THTHURSDAY, AUGUST 11TH

CNC GRINDERS11.8” X 23.6” Shigiya Model GPS-30.60 CNCCylindrical Grinder; S/N 100187, Fanuc PowermateControl, Marpross In Process Gauging, 11.8” Swing, 23.6”Max. Bet. Centers, 16” Max. Grinding Wheel Dia., 7.5 HPDrive Motor, Coolant System, Torit Dry-Off Mist CollectionSystem (New 7/2000) SEE PHOTO11.8” X 14.6” Shigiya Model GPS-30.40 CNCCylindrical Grinder; S/N 09062, Fanuc PowermateControl, Marpross In Process Gauging, 11.8” Swing, 14.6”Max. Bet. Centers, 16” Max. Grinding Wheel Dia., 7.5 HPDrive Motor, Coolant System, Torit Dry-Off Mist CollectionSystem (New 1999) SEE PHOTO9.1” X 13.8” Mitsubishi Model RD23-H-35A AngleHead CNC Cylindrical Grinder; S/N N/A, Fanuc 18-TControl, Marpross In Process Gauge, 9.1” Max Swing, 13.8”Max Bet. Centers, 16” X 5” Bore X 50 MM Wide GrindingWheel Size, Coolant System (New 8/1995) SEE PHOTO

CNC TURNING CENTERSOkuma Model LU-15 Four-Axis Two-Turret CNCTurning Center; S/N 1247, Okuma OSP-7000L Control,20.87” Swing Over Bed, 14.96” Swing Over Cross Slide,23.62” Between Centers, 14.17” Max Turning Dia., 10.24” /5.51” X-Axis (Upper/Lower), 25.20” / 24.21” Z-Axis(Upper/Lower), 2.44” Spindle Bore, 75 - 4500 RPM, 12-Position Top & 8-Position Bottom Turrets, Sub Spindle, ChipConveyor, Coolant - Currently Out Of Service, Lower TurretNeeds Repair (New 1998) SEE PHOTOMazak Quick Turn Model QT-20 CNC TurningCenter; S/N 124308, Mazak Mazatrol T Plus Control, 8”Chuck, 20” Max. Swing, 11.8” Max. Cutting Diameter, 17.5”Max Machining Length, 7.08” X-Axis, 21.1” Z-Axis, 8-Position Turret, Tailstock, Coolant, Chip Conveyor (New9/1996) SEE PHOTOMazak Quick Turn Model QT-15N Univ CNCTurning Center; S/N 113876, Mazatrol T-Plus CNCControl, 8” Kitagawa Chuck, 18” Distance Between Centers,17” Swing Over Bed, 10” Swing Over Cross Slide, 7.09” X-Axis, 20.12” Z-Axis, 45-4500 RPM Spindle, 2.44” Hole ThruSpindle, 8-Station Tool Turret, Chip Conveyor, CoolantSystem, Tool Eye (New 1995) SEE PHOTO

Mazak Quick Turn Model QT-10 CNC TurningCenter; S/N 421689, Mazatrol T-Plus Control, 6” KitagawaChuck, 8-Pos. Turret, Tailstock, Chip Conveyor, Tool Arm,Coolant (New 1996) SEE PHOTO

Wasino Model G07-M Three-Axis Gang Tool CNCLathe; S/N 1024, Fanuc 21i-TB CNC Control, (2) LiveSpindles (1) Straight & (1) Right Angle, 6-3/4” X 22-1/2” T-Slotted Tool Mounting Area, Coolant, Low Hours (New2004) SEE PHOTO

CNC VERTICAL TURNING CENTERS(2) Hardinge Model Conquest VT-200 / RV-200 CNCVertical Turning Centers; S/N VL214-2 VT-200, VL352-2,Fanuc 18T CNC Control, 24” Approx. Swing, 7.94” X-Axis,19.88” Z-Axis, 12-Pos. Turret, 18.5 KW / 22KW SpindleMotor, Coolant, Chip Conveyor (New Approx. 1996)

SEE PHOTO

(2) Olofsson Model 2075E Twin-Spindle CNCVertical Turning Centers; S/N 14156 and 14157, Fanuc16T CNC Control, Single Station Turning Tool, Approx. 12”Horizontal Travel, Approx. 18” Vertical Travel, 18.5 / 22 KWDrive Motor, Coolant, Light Curtains, Push & Palm Buttons(New 1997) SEE PHOTO

Carcass of Hardinge VT-200

CNC VMC’SHaas Model VF-4 Three Axis CNC VerticalMachining Center; S/N 3466, Haas CNC Control, 18” X52” T-Slotted Table, 50” X-Axis, 20” Y-Axis, 25” Z-Axis, No.40 Taper Spindle, 20-Pos. ATC, 15 HP High Torque Spindle,Chip Conveyor, Coolant System (New 1994) SEE PHOTO

Haas Model VF-3 Three-Axis CNC VerticalMachining Center; S/N 2388, Haas CNC Control, 18” X48” T-Slotted Table, 40” X-Axis, 20” Y-Axis, 25” Z-Axis, No.40 Taper Spindle, Spindle Speeds to 7,500 RPM, 20-Pos.Automatic Tool Changer, Coolant System (New 1993)

SEE PHOTO

(2) Hardinge Model ConquestVT-200 / RV-200 CNC VerticalTurning Centers

Wasino Model G07-M Three-Axis Gang Tool CNC Lathe Mazak Quick Turn Model QT-10 CNC TurningCenter

Mazak Quick Turn Model QT-15N Univ CNC TurningCenter

Mazak Quick Turn Model QT-20 CNC Turning Center

9.1” X 13.8” Mitsubishi Model RD23-H-35A AngleHead CNC Cylindrical Grinder

Okuma Model LU-15 Four-Axis Two-Turret CNCTurning Center

11.8” X 23.6” Shigiya Model GPS-30.60 CNCCylindrical Grinder

11.8” X 14.6” Shigiya Model GPS-30.40 CNCCylindrical Grinder

NEW1999

NEW1995

NEW1995

NEW1998

NEW1996

NEW1996

NEW1996 NEW

2004

NEW2000

LOWHOURS

1134800B CIA Faxon Machining-6 7/8/11 8:54 AM Page 6

THURSDAY, AUGUST 11THTHURSDAY, AUGUST 11TH

SPLINE ROLLING MACHINESMichigan Tool Model 4085 Roto-Flo Spline RollingMachine; S/N 3251, 40 HP Hydraulic System, Push ButtonControl SEE PHOTOMichigan Tool Model 3225 Roto-Flo Spline RollingMachine; S/N 3653, Reconditioned by Micromatic Textron, 15 HPHydraulic System, Push Button Control SEE PHOTO

DOUBLE DISC GRINDERGardner Model SDG3-30 Double Disc Grinder; S/N 869-7,(2) 40 HP Grinding Head, 30” Wheel Face, 4’ Belt Feed, PBControl, Airtronics Gauging System SEE PHOTO➢ Henry Filters Model 150 MV-9 Coolant Filtration System

D.E. FACING & CENTERING MACHINESGeorg Fischer Type ZM-80 D.E. Facing and CenteringMachine; S/N 26532-20, Spindle Speeds 28 to 2360 RPM, TwinSpindle, (2) Tool Rests, Front Parts Loader and Rear UnloadingConveyor, Chip Conveyor, Coolant System, Pendant Push ButtonControl (New 1999) SEE PHOTOGeorg Fischer Type ZM-80 D.E. Facing and CenteringMachine; S/N 21814, Spindle Speeds 28 to 2360 RPM, TwinSpindle, (2) Tool Rests, Chip Conveyor, Coolant System

CNC WIRE EDMMitsubishi Model DWC90SB CNC Wire Cut EDM; S/N0095B108, 19” X 21” Table, Dielectric Fluid, Mitsubishi CNCControl, Auto Wire Threading (New 1990) SEE PHOTO

MISC. MACHINERY25 Ton Eitel Model RP-25 C-Frame HydraulicStraightening Press; S/N 25170, 10” X 55” Bed Size

SEE PHOTO18”/28” X 60” Whacheon Model VL-435 X 1500G GearedHead Gap Bed Engine Lathe; S/N 8901-65, 18” Swing OverBed, 28” Swing In Gap, Inch Threading, Chasing Dial, PB Control,Coolant, 5 HP Spindle Motor (New 1989) Advance Hydrocat Model 459005 LP Gas Sit Down RiderType Floor Scrubber; S/N 1122735 SEE PHOTOSunnen Model CHV-31C Cylinder King Precision Hone;S/N 1S1115, 48” Wide, Overarm Honing Spindle, Coolant in BaseSEE PHOTOImpco Horizontal Shaft Straightening Machine; S/N N/A,Approx. 24” Between Centers, (3) Shaft Checking Stands, Push &Palm Buttons, Currently in Storage SEE PHOTOCrane Packaging Lapmaster 48 Lapping Machine;S/N 45024, Currently in StorageCincinnati No. 2 Universal Tool & Cutter Grinder;S/N 102T5F-70, Universal Grinding Head, Motorized Workhead,Tailstock24” Kansas Instruments Model PG-1400 Belt Sander;S/N 40368, 15 HP

Michigan Tool Model 4085 Roto-Flo Spline Rolling Machine Michigan Tool Model 3225 Roto-Flo Spline RollingMachine

Impco Horizontal ShaftStraightening Machine

25 Ton Eitel Model RP-25C-Frame HydraulicStraightening Press

Mitsubishi Model DWC90SBCNC Wire Cut EDM

Advance Hydrocat Model459005 LP Gas Sit DownRider Type Floor Scrubber

Georg Fischer Type ZM-80 D.E. Facing andCentering Machine

Gardner Model SDG3-30 Double Disc Grinder

Sunnen Model CHV-31C Cylinder KingPrecision Hone

(2) Olofsson Model 2075E Twin-SpindleCNC Vertical Turning Centers

Haas Model VF-3 Three-Axis CNC VerticalMachining Center

AUCTION INFORMATION Auction and Equipment Located at

FAXON MACHINING, INC.11101 Adwood DriveCincinnati, Ohio 45240

Auction Date:THURSDAY, AUGUST 11THSTARTING AT 1:00 PM

Exclusive Rigging Company:SK Rigging Co., Inc.11515 Rockfield CourtCincinnati, OH 45241-1918

Brad Schneiderbschneider@skrigging.com513.771.7766 office513.782.3666 fax

There will be an exclusive rigging company for all equipment at the facility. Pricing willbe available for each item in the auction catalog. Check our website one week prior to sale for catalog listing.

Inspection Times & Requirements:Wednesday, August 10th From 10:00 AM to 4:00 PM and morning of sale starting at 9AM

➢ Plant Safety Regulations will be strictlyenforced. Proper attire will be required,no shorts or open toed shoes.

Sale Info:This will be a short auction of only about50 lots of primarily large machinery. VeryFew or No small items will be available. Thereis a possibility that additional machinery and equipment will be added to this auction, seeauction catalog one week prior to auction forcomplete listing.

NEW1997

NEW1999

1134800B CIA Faxon Machining-6 7/8/11 8:54 AM Page 1

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

12% ONSITE BUYER’S PREMIUM 15% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

From I-275 Just West of the junction of I-75 ExitI-275 at No. 41 OH RT-4 Springfield Pike. ProceedSouth on OH-4 for 1 Mile to Northland Blvd. TurnRight and proceed 1/4 mile to Adwood Dr. TurnLeft and proceed 1/4 mile to sale site on right.Watch for Auction Parking Signs and Arrows.

DIRECTIONS

THURSDAY, AUGUST 11THTHURSDAY, AUGUST 11TH

Cincinnati IndustrialAuctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com

SALE DATE:Thursday, August 11th

STARTING AT 1:00 PMINSPECTION:

Wednesday, August 10th10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

SALE DATEThursday,

August 11th1:00 pm

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF

FAXONMACHINING, INC.

LATE MODEL CNC MACHINING EQUIPMENT BYMAKINO, OKUMA, MAZAK, HAAS AND OTHERAUTOMOTIVE MANUFACTURING EQUIPMENT

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

FAXONMACHINING, INC.11101 Adwood Drive – Cincinnati, Ohio 45240

20 Miles Northwest of Downtown off I-275

(3) CNC Cylindrical Grinders(3) CNC Cylindrical Grinders

(5) Makino CNC HMC’s(5) Makino CNC HMC’s(5) Makino CNC HMC’s

(3) CNC Cylindrical Grinders CNC Gun DrillCNC Gun DrillCNC Gun Drill

60” Monarch CNC VTL60” Monarch CNC VTL60” Monarch CNC VTL

FAXONMACHINING, INC.

SURPLUS TO THE ONGOING OPERATIONS OF

FAXONMACHINING, INC.

11101 Adwood DriveCincinnati, Ohio 45240

20 Miles Northwest of Downtown off I-275

SURPLUS TO THE ONGOING OPERATIONS OF

Cincinnati Industrial Auctioneers, Inc. – License No. 63-1983-10439Jeffrey L. Luggen – License No. 57-1983-33789Jerome A. Luggen – License No. 52-1983-33799Jeffrey M. Luggen – License No. 2010-0000-26Joseph M. Luggen – License No. 2010-0000-19

John F. Rome – License No. 57-2000-84249

1134800B CIA Faxon Machining-6 7/8/11 8:54 AM Page 2