Embed Size (px)
Citation preview
COMPLETE MACHINE REBUILDER AND SHOP SERVING THE RAILROAD INDUSTRYINCLUDING WATER-JET, HAAS CNC MACHINING, FORKLIFTS TO 36,000 LB.,
MACHINE PARTS, TOOLROOM, SHOP AND SUPPORT EQUIPMENT
COMPLETE MACHINE REBUILDER AND SHOP SERVING THE RAILROAD INDUSTRYINCLUDING WATER-JET, HAAS CNC MACHINING, FORKLIFTS TO 36,000 LB.,
MACHINE PARTS, TOOLROOM, SHOP AND SUPPORT EQUIPMENTSee Instructions on Page 3
To Become a Qualified Bidder on the Internet
SALE DATE: THURSDAY, JUNE 1ST, STARTING AT 9:00 AM CENTRALSALE DATE: THURSDAY, JUNE 1ST, STARTING AT 9:00 AM CENTRALINSPECTION: MAY 31ST, FROM 10:00 AM TO 4:00 PM
INNOVATIVE INDUSTRIAL SERVICESINNOVATIVE INDUSTRIAL SERVICES700 S. Fayette Rd. – El Paso, Illinois 6173820 Miles North of Bloomington Normal, Illinois
Plant Closed
Haas Model SL-40LB Big Bore Long Bed CNC Turning Center 36,000 Lb. Komatsu Model FD160E-8 PneumaticTire Diesel Powered Lift Truck
Omax Model 60120 CNC Water Jet Cutter / Machining Center w/ Tilt-A-Jet
16’ x 16’ x 34’ GFS Global Finishing Solutions ModelCDG-1616NDT-34-SS Cross Draft Drive-Thru Paint Booth
Haas VF5/50XT CNC Vertical Machining Center
NEW2011
NEW2008
50TAPERNEW
2007
NEW2007
NEW2010
Big BoreLong Bed
LOWHOURS
LOWHOURS
760HOURS
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Sale Under The Management Of
Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]
In Conjunction With
HGR Industrial Surplus20001 Euclid Ave., Cleveland, Ohio 44117Phone 216-486-4567 Fax 216-486-4779hgrinc.com | [email protected]
1748966P CIA-HGR Innovative Industrial Services-4 5/5/17 7:23 AM Page 1
THURSDAY, JUNE 1ST – 9:00 AM CENTRALTHURSDAY, JUNE 1ST – 9:00 AM CENTRAL
CNC WATER JET CUTTINGMACHINESOmax Model 60120 CNC Water JetCutter / Machining Center w/ Tilt-A-Jet; s/n H511661, CNC Control, 10’-6”X-Axis, 5’-2” Y-Axis, 6” Z-Axis, 12’ x 6’-5”Table, Enduro-MAX 40-HP, Approx. 2,812Hours, Koolant Koolers Model HAF-1100Chiller (New 2011) SEE PHOTOOmax Model 5555 CNC Water JetCutter / Machining Center w/ Tilt-A-Jet; s/n J511503, 4’-7” X-Axis, 4’-7” Y-Axis, 6” Z-Axis, 6’-8” x 5’-5” Table, Omax40-HP Pump, Approx. 2,600 Hours,Koolant Koolers Model HAF-1100 Chiller(New 2008) SEE PHOTO
CNC VERTICAL MACHININGCENTERHaas VF5/50XT CNC VerticalMachining Center; s/n 1053278, HaasCNC Control, 23” x 62” Table, 60”-X,26”-Y, 25”-Z, No. 50 Taper, 30-HP Drive,24-Pos. ATC, 7,500 RPM, Geared, CoolantThru Spindle, Approx. 2,613 SpindleHours Showing (11/2006) SEE PHOTOHaas 4th Axis Table w/ 12” Table,10” Chuck, Tailstock(100) No. 50 Toolholders
CNC TURNING CENTERHaas Model SL-40LB Big Bore LongBed CNC Turning Center; s/n3076356, Haas CNC Control, VOP-ASystem, 18” Chuck, 7” Bore, 40” SwingOver Bed, 25” Swing Over Cross, 89”Centers, 10-Pos. Turret, 55-HP Drive, BigBore, Long Bed, Tailstock, Approx. 3,740Hours Showing (3/2007) SEE PHOTO
LIFT TRUCKS AND RELATED36,000 Lb. Komatsu ModelFD160E-8 Pneumatic Tire DieselPowered Lift Truck; s/n 7010, ModelVI60Y833 136” Collapsed Height 2-StageMast, Komatsu 12.7-Liter Diesel Engine,92” Wide Model FHM-1608 Carriage, 96”Forks, 760 Hours (New 2008)
8,000 Lb. Nissan Model Optimum80 Solid Tire LP Gas Lift Truck; s/nn/a, 3-Stage Mast, Sideshift, Approx.6,400 Hours6,000 Lb. Caterpillar Model DP-30LP Gas Pneumatic Tire Lift Truck;s/n 7KM3577, 5,600 HoursMitsubishi Model MW23N ElectricPallet Truck; s/n 90255895, 44” Forks
PAINT BOOTH16’ x 16’ x 34’ GFS Global FinishingSolutions Model CDG-1616NDT-34-SS Cross Draft Drive-Thru PaintBooth; s/n U7458A, 12’ x 14’ Doors,Lightly Used, Exhaust Fan (10/2010)
SEE PHOTO
VERTICAL TURRET LATHE52” King Three-Head Vertical TurretLathe; s/n 2883, Lot 395, 60” Swing, 52”Table, Ram, Turret and Side Heads, TableSpeeds to 151 RPM, 36” Approx. UnderColumn, 30-HP Drive SEE PHOTO
PLANER56” x 42” x 240” Gray Four-HeadPlaner; s/n n/a, 56” x 24’6”” Table Area,PLC Control, 150-HP A/C Drive, Pendant
SEE PHOTO
TOOLROOM MACHINERY12” X 36” Chevalier Model FSG-1236AD Hydraulic Surface Grinder;s/n F3827001, PB Control, Dresser,Coolant SEE PHOTO(2) 3-HP Jet Model JTM-4VSVertical Milling Machines; s/n7010988 and 7011018, 9” x 48” PowerTables, Acu-Rite DRO’s SEE PHOTO25” x 96” Monarch Engine Lathe; s/n34999, 27.5” Actual Swing, 24” Chuck,Taper Attachment, Rebuilt 1989
SEE PHOTO3” Giddings and Lewis Model 340-TTable Type Horizontal Boring Mill;s/n 7187, 36” x 74” Table, 42” Approx.Max. Height, 50/25-HP Motor, No. 50
Taper, Acu-Rite DRO SEE PHOTO36” Jaespa Model ASH10 VerticalBand Saw; s/n 87-9719, Blade Welder16” x 40” Takisawa Model 1000CDLathe w/ DRO18” x 18” Marvel Model 18 SwivelHead Power Hack Saw SEE PHOTORadii Cutter Deluxe 12D System
MACHINE ACCESSORIES,TOOLING AND INSPECTIONEQUIPMENTMachine Accessories, Tooling andInspection; (10) Kurt Machine Vises to8”, Indexable Bars and Lathe Tools,Precision Vises, End Mills, Drills, Taps,Reamers, Perishable and IndexableTooling, (2) 10” x 48” X (2) 12” X 24”Angle Plates, Hold Dow and Set-UpEquipment, Collets, R8 Collets andHolders, 0”-12” OD Mic Sets, 3’ X 4’Granite Surface Plate, Dial Height Gages,Pin Gage and Gage Block Sets
CONTAINERS(3) 40’ Storage Containers
PRESS BRAKE ANDWELDERS100 Ton X 12’ Wisconsin Model12TM-100 Mechanical Power PressBrake; s/n 74550, Air Clutch, 3” Stroke
SEE PHOTOMiller XMT454 Welder w/ Wire FeedMiller Millermatic 350 WelderLincoln 210MP Power Mig Welderwith Wire Feed
MISC. MACHINERY ANDEQUIPMENTHeavy Duty Shop Built H-FramePress; 5 HP Hydraulic, 2-1/2” X 20”Approx. Cylinder, 48” BedGreenlee 555 Power Conduit Benderw/ Dies and Accessories
SEE PHOTO
3” Giddings and Lewis Model 340-T Table TypeHorizontal Boring Mill
(2) 3-HP Jet Model JTM-4VS Vertical Milling Machines100 Ton X 12' Wisconsin Model 12TM-100Mechanical Power Press Brake
12" X 36" Chevalier Model FSG-1236AD HydraulicSurface Grinder
25" x 96" Monarch Engine Lathe
52” King Three-Head Vertical Turret Lathe
56” x 42” x 240” Gray Four-Head Planer
Omax Model 5555 CNC Water JetCutter / Machining Center w/ Tilt-A-Jet
Omax Model 60120 CNC Water Jet Cutter / MachiningCenter w/ Tilt-A-Jet
NEW2011
NEW2008
1748966P CIA-HGR Innovative Industrial Services-4 5/5/17 7:23 AM Page 2
INNOVATIVE INDUSTRIAL SERVICESINNOVATIVE INDUSTRIAL SERVICES
15 HP Atlas GX11FF AirCompressor; s/n AII168206, 51 CFM,129 PSI, 21,000 Hours (2007)
SEE PHOTOFMT Model 3222222 Magnetic BaseDrill with TappingRidgid 300-12 Power Pipe Threader(5) Dapra Blax Electric WayScrappers Hillman Roller Skate Set and OtherHD Skates20” Wilton Model 1421-2 DiscSander, 3 HP 26” x 120” HD Planer Table withCast Iron BaseDake No. 2-1/2 HP Arbor PressAllen Bradley Model 1492-PLTK1TX-Y Plotter MarkerMilwaukee Magnetic Base DrillShark Gas Power Steam Cleaner
FARRELL RAILROADMACHINE PARTSFarrell Wheel Lathe with Loader
(2) Skids Various Farrell MachineParts
PORTABLE GANTRY ANDA-FRAME CRANES(2) Approx. 10 Ton Shop BuiltHeavy Duty Portable HydraulicGantry Units; 120” Between Uprights,96” Under Column Collapsed Height,Approx. 60” Lift, 5 HP Hydraulic Units
SEE PHOTO(2) 2 Ton x 16’ Span Contrx ModelGL-16 Portable A-Frame GantryCranes; 10’ Under Beam El GL-SP w/ (2)Manual and (1) w/ (2) Electric Hoists
SEE PHOTO2 Ton Gantry w/ Manual Hoist1 Ton x 12’ Arm Abell FreeStanding Jib Crane w/ (2) Hoists,11’ Under Arm SEE PHOTO
MACHINE REBUILDER ANDSUPPLIESMachine Rebuilding Parts andSupplies; Allen Bradley 150 HP A/CDrive; s/n 20G1AND186AA, 60 HP
Baldor Spec P21M0503 Electric Motor, 5HP to 20 HP Electric Motors, ServoMotors, (20) Various Hydraulic Cylindersto 36”, Hydraulic Pump Units andStainless Hose Fittings, MachineRebuilding Supplies, Switches, Breakers,Sensors, Plugs, Conduit Hardware,Hydraulic, Hose Fittings, HydraulicValves, Machine Leveling Feet
LATE MODEL SHOPEQUIPMENT Shop Equipment and Hand Tools;(10) HD Strong Hold Storage Cabinets,Electric Hydraulic Scissor Lift Tables, (7)Various Portable Tool Cabinets, (5) DrillPresses, Oxytorch, (10) Various DEGrinders, HD Steel Sawhorse, HD BenchVises, Banding Outfits, Hand Tools, Fans,Carts, Racks and Related, Electric Drills ofAll Types, Angle Grinders, Sawzall Units,Circular Saw, (2) 3” HD Belt Sanders,Johnson Transit, Hydraulic Jacks withHand and Electric Pumps, Air ElectricReels, Jack Stands, Lifting Equipment,Chains, Slings, Magnets, Plate Grabbersand Related
WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale
Date, if you do not you will not be approved.
➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned SpendingBudget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to beapproved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period.
Greenlee 555 PowerConduit Bender w/Dies and Accessories
15 HP Atlas GX11FF AirCompressor
18” x 18” Marvel Model18 Swivel Head PowerHack Saw
1 Ton x 12’ Arm AbellFree Standing JibCrane w/ (2) Hoists, 11’Under Arm
Late Model Welders
(2) 2 Ton x 16’ Span Contrx Model GL-16 PortableA-Frame Gantry Cranes
(2) Approx. 10 Ton Shop Built Heavy DutyPortable Hydraulic Gantry Units
36,000 Lb. Komatsu Model FD160E-8 Pneumatic TireDiesel Powered Lift Truck
8,000 Lb. Nissan and 6,000 Lb. Caterpillar Fork Lifts
Machine Rebuilding Parts and Supplies
Farrell Rail Car Macine Parts
NEW2008
760HOURS
1748966P CIA-HGR Innovative Industrial Services-4 5/5/17 7:24 AM Page 3
FIRST CLASS MAIL!
Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞
All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.
15% ONSITE BUYER’S PREMIUM18% ONLINE BUYER’S PREMIUM
TERMS OF SALEFrom I-39 Approx. 15 Miles north ofBloomington Normal, Illinois. Exit at no.14 US-24 toward El Paso. Turn east ontoUS-24 and proceed 1/2 mile to S. FayetteSt. Turn right (south) on S. Fayette andproceed 1/2 mile to sale site on left.
DIRECTIONS
THURSDAY, JUNE 1STTHURSDAY, JUNE 1ST
INNOVATIVEINDUSTRIAL
SERVICES
Although information has been obtained fromsources deemed reliable, the auctioneer makes nowarranty or guarantee, expressed or implied, as tothe accuracy of the information herein contained. It is for this reason that buyers should avail them-selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions.Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily besold as described and/or photographed in this brochure.
MAIL BIDS ACCEPTED WITH A 25% DEPOSIT
IMPORTANT NOTICE:
PRE-SORTFIRST CLASS
U.S. POSTAGEPAID
CINCINNATI, OHIOPERMIT NO. 3593
Plant Closed
INNOVATIVEINDUSTRIAL
SERVICES700 S. Fayette Rd. – El Paso, Illinois 6173820 Miles North of Bloomington Normal, Illinois
Paint Booth (2010)Paint Booth (2010)Paint Booth (2010) 36,000 Lb. Komatsu36,000 Lb. Komatsu36,000 Lb. Komatsu
Omax Water JetsOmax Water JetsOmax Water Jets Hass SL40LB LatheHass SL40LB LatheHass SL40LB Lathe
INNOVATIVE INDUSTRIAL SERVICES
Plant Closed
INNOVATIVE INDUSTRIAL SERVICES700 S. Fayette Rd. – El Paso, Illinois 61738
20 Miles North of Bloomington Normal, Illinois
SALE DATE:Thursday, June 1stSTARTING: 9:00AM CST
INSPECTION:Wednesday, May 31st10:00 AM to 4:00 PM
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com
Jeffrey L. Luggen – IL License No. 441.000380Joseph M. Luggen – IL License No. 441.002228
AUCTIONEERS
CINCINNATIINDUSTRIALAUCTIONEERS
auctioneers | appraisers | since 1961
Sale Under The Management Of
Cincinnati Industrial Auctioneers2020 Dunlap St., Cincinnati, Ohio 45214Phone 513-241-9701 Fax 513-241-6760cia-auction.com | [email protected]
In Conjunction With
HGR Industrial Surplus20001 Euclid Ave., Cleveland, Ohio 44117Phone 216-486-4567 Fax 216-486-4779hgrinc.com | [email protected]
1748966P CIA-HGR Innovative Industrial Services-4 5/5/17 7:24 AM Page 4
