PUBLIC AUCTION - secure-s3.serverdata.com...BAITY'S PRECISION MACHINING 247 Old Weaverville Rd., Woodfin, NC 28804 THURSDAY, FEBRUARY 8, 2018-9:00 AM REGISTRATION: All Bidders must

SALE CATALOGPlant Closed

BAITY'S PRECISION MACHINING247 Old Weaverville Road, Woodfin, NC 28804

THURSDAY, FEBRUARY 8, 2018 – 9:00 AM

Auctioneers: Cincinnati Industrial Auctioneers, Inc. – License No. 5610Jeffrey L. Luggen – License No. 5611 • Joseph M. Luggen – License No. 9333

15% BUYER’S PREMIUM IS IN EFFECT FOR THIS SALE ON-SITE!18% BUYER’S PREMIUM IS IN EFFECT FOR THIS SALE ONLINE!

NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS!

ALTHOUGH INFORMATION HAS BEEN OBTAINED FROM SOURCES DEEMED RELIABLE, THE AUCTIONEER MAKES NO WARRANTY FOR GUARANTEE EXPRESSED OR IMPLIED, AS TO THE ACCURACY OF THE INFORMATION HEREIN CONTAINED.

IT IS FOR THIS REASON THAT BUYERS SHOULD AVAIL THEMSELVES FOR THE OPPORTUNITY TO MAKE INSPECTION PRIOR TO THE SALE.

Sale Under the Management of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | [email protected] Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

AUCTIONPUBLIC

SYNOPSIS OF THE TERMS OF SALE

BAITY'S PRECISION MACHINING 247 Old Weaverville Rd., Woodfin, NC 28804

THURSDAY, FEBRUARY 8, 2018-9:00 AM REGISTRATION: All Bidders must register and are required to give positive identification at time of registration.

"AS IS, WHERE IS": Everything is being sold for cash on an " as is", "where is" basis without warranties expressed or implied on part of the Owner and Auctioneer. There are NO REFUNDS, NO EXCHANGES, NO GUARANTEES or NO WARRANTIES on any item. ALL SALES ARE FINAL.

DEPOSITS: All Bidders must post a deposit upon request at time of registration or at time of sale by Auctioneer.

PAYMENTS: ONSITE BUYER'S INVOICES MUST BE PAID IN FULL AT THE SALES CONCLUSION. ONLINE BUYER'S INVOICES MUST BE PAID IN FULL WITHIN 24 HOURS AFTER THE AUCTION. Any merchandise not paid for by this specified time will be considered abandoned and may be resold by the auctioneer, any loss incurred in the resale to be borne by the original buyer. All payments must be made in cash or certified funds. Please inquire with auction personnel regarding the acceptance of funding.

REMOVAL: Time permitting, auction personnel will be available at the conclusion the sale for one (1) hour for the removal of tabletop and hand carried items.

ALL SMALL ITEMS MUST BE OFF THE PREMISES BY FRIDAY, FEBRUARY 9, 2018 at 4:00 PM. Auctioneer/Owner will not be responsible for any small items after this time.

ALL LARGE ITEMS MUST BE OFF THE PREMISES BY THURSDAY, FEBRUARY 15, 2018 at 4:00 PM. After this time, arrangements for removal must be made with Auctioneer.

"TIME IS OF THE ESSENCE" ALL ITEMS MUST BE OFF THE PREMISES BY THURSDAY, FEBRUARY 22, 2018 at 4:00 PM. At the Owners Discretion, any items remaining after this time will be removed from the premises and stored at the expense of the buyer, considered abandoned and scrapped.

CHECKOUT HOURS: Friday, February 9th From 8:00 AM to 4:00 PM Saturday, February 10th From 8:00 AM to 1 :00 PM Monday, February 12th -Wednesday, February 14th From 8:00 AM to 4:00 PM After February 14th By Appointment Only during Normal Business Hours Through Thursday, February 22nd!

IMPORTANT AUCTION NOTICES: 15% BUYERS PREMIUM IS IN EFFECT FOR THIS SALE ONSITE! 18% BUYERS PREMIUM 15 IN EFFECT FOR THIS SALE ONLINE!

ALL BUYERS WILL BE REQUIRED TO EXECUTE AN "AUCTION PURCHASE REMOVAL AGREEMENT" NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS!!!

ALL SALES SUBJECT TO STATE AND LOCAL SALES TAX WHERE APPLICABLE ALL BIDDERS MUST COMPLY WITH OUR CUSTOMARY "TERMS OF SALE" ATTACHED HERETO, POSTED AT THE SALE SITE & OUR

WEBSITE@ WWW.CIA-AUCTION.COM.

WIRING INSTRUCTIONS The balance of your invoice may be wired directly to our bank:

PNC Bank, 201 East Fifth Street, Cincinnati, Ohio 45201 Call for Complete Wire Transfer Instructions

PLEASE SPECIFY YOUR BIDDER NUMBER WHEN MAKING YOUR WIRE TRANSFER NOTE: A BANK WIRE TRANSFER FEE WILL APPLY WHICH IS NOT INCLUDED IN BALANCE DUE OF INVOICE

CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers I appraisers I since 1961 I cia-auction.com I [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

TERMS OF SALE

NOTICE: All Bidders and other persons attending this sale ("Bidders") agree that they have read and have full knowledge of these terms and agree to be bound hereby. The Bidder identified by the Auctioneer as the high bidder or successful bidder at auction ("successful Bidder") shall have entered into a legally binding contract to purchase the item bid upon ("Lot") at the price and subject to the terms and conditions set forth herein. All determinations, rulings, and adjustments made by the Auctioneer in good faith shall be final, binding, and conclusive upon all Bidders. The term "Auctioneer" herein means Cincinnati Industrial Auctioneers, Inc.

1. IDENTIFICATION - All Bidders are required to give full name and addresses at time of registration. 2. DEPOSIT - Each successful Bidder will be required to make a deposit in cash or by bank cashier's or certified check of 25

percent (25%) of the successful bid on each Lot at time of knockdown. In default of such deposit, the Lot may be put up again immediately and resold.

3. TIME OF PAYMENT- Each successful Bidder shall receive an invoice during or at the conclusion of the auction. All invoices must be paid in full by the close of business on the last day of the auction sale and prior to removing any Lot. Any other arrangements must be made with auctioneer prior to bidding. In the absence of payment or agreement by the auctioneer, title to the Lot shall not transfer to the successful Bidder and such Bidder will lose any right, title or interest such Bidder may have acquired, and the deposit paid, if any, without further notice to such Bidder. The Bidder shall nonetheless remain liable for any damages caused by the Bidder's failure to pay.

4. REMOVAL - All purchases must be removed not later than the date specified in the Auction Catalogue and/or announced at the sale. No Lot can, on any account, be removed during the sale. All goods are sold "Where Is." Removal shall be at the expense, risk, and liability of the successful Bidder. Purchases will be released only on presentation of paid invoice. Auctioneer shall not be responsible for Lots not removed within the time allowed, but Auctioneer shall have the option to remove and store at the expense and risk of the successful Bidder any article purchased, but not paid for and removed within the time required.

5. MANNER OF PAYMENT - All payments must be made by cash, bank cashier's check or company check with a bank letter of authorization guaranteeing funds to "Cincinnati Industrial Auctioneers, Inc." All checks for deposits and balances due shall be payable to the order of "Cincinnati Industrial Auctioneers, Inc." All invoices must be paid to representatives of the Auctioneer at the auction site unless otherwise announced. The full purchase price on all Lots sold to the same successful Bidder must be paid within the time fixed and before removal of any Lot.

6. DISCALIMER OF ALL WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR PARTICULAR PURPOSE; CONDITION OF ARTICLES SOLD-The Auctioneer and any owner. seller. or secured party make no warranties express or implied as to merchantability or fitness for purpose whatsoever. All such express or implied warranties are expressly excluded hereby. No oral statement or other writing by any person negates this exclusion. If you think you have received any assurance or warranty of any kind as to a Lot offered in this auction do not bid on such item unless the Auctioneer has signed a writing specifically directed to you and identifying the Lot and stating the modification of this exclusion The Auctioneer shall not be responsible for the correct description. genuineness. authenticity of, or defect in any Lot, and makes no warranty in connection therewith. No sale will be set aside nor allowance made on account of any incorrectness. error in commentary, cataloging, or any imperfection not noted. No deduction. credit or avoidance shall be allowed on damaged articles, all Lots being exposed for public exhibition are purchased and accepted by successful Bidder "AS IS", "WHERE IS" and "WITH ALL FAULTS". Auctioneer makes no warranties or guarantees whatsoever whether written, oral or implied as to quality. quantity, condition, usability, salability, weight. measurement, age, model, mechanical condition. performance or other specifications and all sales made are utterly without recourse.

7. CLAIMS - No Claims will be allowed after removal of Lots from premises. 8. RESPONSIBILITY FOR NON-DELIVERY- Auctioneer, any owner, seller or secured party shall not, in any event, be

liable to any Bidder for non-delivery of any Lot or for any other matter or thing, other than for the return to the successful Bidder of the deposit or sum paid on said Lot, should the successful Bidder be entitled thereto. This means that if are a successful Bidder and for any reason your Lot is not made available to you, you agree that the damages you may claim for such non-delivery are limited to the amounts you have paid and you waive any claim for damages for lost profits, opportunity, the value of the Lot in excess of the purchase price, your time, expenses, incidental and consequential damages, all of which are expressly waived.

9. COMPLIANCE WITH TERMS OF SALE - In default of payment of invoices in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or


private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting successful Bidder.

10. RISK TO PERSON AND PROPERTY- Persons attending during exhibition, sale, or removal of Lots assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefore and agree to indemnify and hold the Auctioneer harmless from any loss, claim, liability, cost, or expense caused all or in part by such person(s). Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the exhibition, sale, or removal of Lots is held.

11. ADDITION TO OR WITHDRAWAL FROM SALE - The Auctioneer reserves the right to alter the order of the sale, withdrawal from the sale any of the Lots or parts thereof or to sell at this sale Lots not listed, and also reserves the right to group one or more Lots into one or more selling Lots or to subdivide into two or more selling Lots, or make any combination thereof which Auctioneer in its sole discretion determines. Whenever the best interest of the Seller will be served, the Auctioneer reserves the right to sell Lots in bulk.

12. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE - Where items are sold by estimated weight, count, or measure, the successful Bidder will be invoiced for and required to pay for the estimated weight, count, or measure. If upon delivery any shortage exists, the successful Bidder will receive a credit at the rate of the bid. If there be an excess, the successful Bidder will be required to take and pay for such excess, at the rate of the bid.

13. DISPUTE BETWEEN BIDDERS/BID INCREMENTS - If any dispute arises between two or more Bidders, the Auctioneer may decide the same or put the Lot up for sale again at once, or resell to the highest Bidder. The Auctioneer may reject a nominal or fractional bid advance in the Auctioneer's sole discretion

14. RESERVE-The Auctioneer reserves the right to reject any and all bids. On Lots upon which there is a reserve, the Auctioneer shall have the right to bid on behalf of the seller, owner or secured party and shall have no obligation to denote or announce such reserve or bid.

15. RECORDS -The record of sale kept by the Auctioneer and bookkeeper will be taken as final in the event of any dispute. 16. AGENCY-The Auctioneer is acting as agent only and is not responsible for the acts of its principals. 17. SALES TAX-All sales are subject to state and local taxes, which will be collected from the successful Bidder unless a proper

exemption certificate including tax-exempt number is presented at the time of payment. 18. BUYER'S PREMIUM - The Auctioneer in its sole discretion may impose a Buyer's Premium on any Lots sold. The Buyer's

Premium is a percentage that is added to the final purchase price of any Lot. 19. SHIPPING-All coolants, oil and fluids must be drained from all machinery and equipment prior to removal. All of the above

must be shipped in compliance with state and federal regulations. Unless otherwise expressly provided in writing, preparation and shipment shall be at the sole responsibility and cost of the successful Bidder.

20. INSURANCE -All successful Bidders, or the their riggers must provide the Auctioneer and the owner of the premises of the sale a certificate of insurance in amounts acceptable to the Auctioneer prior to removal of any Lot.

21. ADDITIONAL TERMS AND CONDITIONS - Except as set forth in Section 6 above, the Auctioneer may modify or supplement these terms and conditions of sale by language in the catalog available at the sale site or by announcement at the start of the sale.


AUCTION PURCHASE & REMOVAL AGREEMENT

BAITY'S PRECISION MACHINING 247 Old Weaverville Rd., Woodfin, NC 28804 THURSDAY, FEBRUARY 8, 2018 - 9:00 AM

All purchasers of items at the Baity's Precision Machining auction conducted by Cincinnati Industrial Auctioneers, Inc. hereby agree to the following:

All purchasers agree to abide by the "Terms of Sale" as listed on our website and posted at the auction premises. The Auctioneer and Owner make no warranties express or implied as to merchantability, fitness for purpose, or condition of the articles being sold. All such expressed or implied warranties are expressly excluded hereby.

All items are purchased on an "As Is, Where Is" basis, with the purchaser to incur all costs in conjunction with the removal of the items from the premises. ALL EQUIPMENT MUST BE REMOVED IN A WORKMAN LIKE MANNER AND ALL UTILITIES MUST BE CAPPED. ALL ANCHOR BOLTS MUST BE CUT OFF AT FLOOR LEVEL. ALL OILS AND COOLANTS MUST BE REMOVED FROM MACHINES PRIOR TO REMOVAL. All items are available for removal during normal business hours through Wednesday, February 14, 2018 at 4:00 PM at which time our representatives will leave the premises. After this time arrangements for removal must be made by appointment with Auctioneer.

"TIME IS OF THE ESSENCE" regarding the removal of items from the premises. All items must be removed by Thursday, February 22, 2018 at 4:00 PM. Any items remaining after this time will be removed and stored at the expense of the buyer, subject to rent/ access fees or considered abandoned and scrapped. NO EXCEPTIONS!

All purchasers and/or riggers of machinery MUST provide Cincinnati Industrial Auctioneers, Inc. and Baity's Precision Machining a certificate of insurance in the amount of $2,000,000.00 prior to removal. Cincinnati Industrial Auctioneers, Inc. and Baity's Precision Machining must be named on the policy as co-insurer.

There are NO REFUNDS, NO EXCHANGES, NO GUARANTEES OR NO WARRANTIES on any item. ALL SALES ARE FINAL.

Accepted By Purchaser:

Company Name

Buyer Number/ Bidspotter Username

Signature Date

Baity's Precision Machining February 8, 2018


CINCINNATI IND. AUCTIONEERS, INC. 2020 DUNLAP STREET CINCINNATI, OH 45214

513-241-9701

Catalog for Auction:BAITY'S PRECISION MACHINING This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy,

genuineness, authenticity, description, weight, count or measure of any of the lots specified herein.

Page 1

Lot Num Qty. Description Lot Num Qty. Description

1 3/4" YANCY MODEL JM2000 SLUGGER 27 2 6 TON CAP. NORTHERN INDUSTRIAL MAGNETIC BASE DRILL SWIVEL BASE NYLON WHEEL MACHINE

2 10" CHICAGO ELECTRIC POWER TOOLS SKATES BENCH TOP TABLE SAW 28 1 16 LB. CAP. TREE MODEL LCT-16

3 10" CHICAGO ELECTRIC POWER TOOLS COUNTING SCALE COMPOUND SLIDE POWER SAW 29 1 15 LB. CAP. PITNEY-BOWES MODEL 5042

4 PORTER - CABLE MODEL 725 TWO-SPEED COUNTING SCALE PORTABLE BAND SAW 30 1 300 LB. SUNBEAM HEALTH SCALE

5 7-1/4" MAKITA MODEL 5007F CIRCULAR 31 1 (LOT) MISC. CORDLESS HAND TOOLS SAW 32 1 BLAK-RAY ULTRA VIOLET LAMP W/ (2)

6 7-1/4" BLACK & DECKER MODEL 7308 MAGNIFYING INSPECTION LAMPS CIRCULAR SAW 33 1 TRI-TEC SERIES 500 SCRAP SAVER WASTE

7 DEWALT MODEL DW321 VARIABLE SPEED STRAPPING RECYCLING MACHINE; S/N 1034 JIG SAW 34 4 36" X 72" X 33" HIGH APPROX. STEEL

8 1/2" DEWALT MODEL DW120 RIGHT ANGLE FRAME WOOD TOP BENCHES W/ (4) DRILL SHEETS PLYWOOD **DELAYED REMOVAL

9 7" MAKITA MODEL 9067L RIGHT ANGLE P/U 2/12/2018** GRINDER 35 1 (LOT) BAR CLAMPS, WOOD LEVEL &

10 1 9" MAKITA MODEL 9607BL RIGHT ANGLE CONDUIT BENDER GRINDER 36 1 HALOGEN LAMP SHOP LIGHT

11 1 9" BLACK & DECKER MODEL 4075 RIGHT 37 1 12" X 18" X 4-1/2" THICK BLACK GRANITE ANGLE GRINDER SURFACE PLATE

12 1 9" TASK FORCE MODEL 90175 BENCH DRILL 38 1 .. OPEN .. 13 4 4-1/2" MISC. MFG. ELECTRIC RIGHT ANGLE 39 1 .. OPEN ..

GRINDERS W/ (1) 1/4" STRAIGHT SHAFT 40 1 .. OPEN .. GRINDER 41 1 .. OPEN ..

14 1 (LOT) 1/2" & 3/8" MISC. MFG. PISTOL GRIP 42 1 .. OPEN .. ELECTRIC DRILLS 43 1 .. OPEN ..

15 1 (LOT) MISC. ELECTRIC HAND TOOLS 44 1 .. OPEN .. 16 1 TORMEK MODEL T-7 WATER COOLED 45 1 .. OPEN ..

17 18

19

20 21 22

23

24 25 26

SHARPENING SYSTEM 1 TORMEK MODEL HTK-706 HAND TOOL KIT 1 RIDGID MODEL A NO. 700 ELECTRIC HAND

HELD THREADING MACHINE 2 RIDGID LONG HANDLE MANUAL PIPE

THREADERS W/ DIES 1 .33 HP BALDOR NEW ELECTRIC MOTOR 1 (LOT) PNEUMATIC HAND TOOLS 1 25 AMP MILLER MODEL SPECTRUM 300

CUTMATE PLASMA CUTTING SYSTEM 1 OXY-ACETYLENE CUTTING TORCH W/

HOSE & GAUGES 1 (LOT) MISC. HAND TOOLS 1 (LOT) MISC. HAND TOLLS 6 6 TON CAP. NORTHERN INDUSTRIAL

SWIVEL BASE NYLON WHEEL MACHINE SKATES

46 47 48 49 50 51 52 53 54 55 56 57 58

59

60

1 .. OPEN .. 1 .. OPEN .. 1 .. OPEN .. 1 .. OPEN .. 1 .. OPEN ..

.. OPEN .. 1 .. OPEN ..

.. OPEN ..

.. OPEN ..

.. OPEN ..

.. OPEN ..

.. OPEN .. PHASE II NO. 900-330 ROCKWELL HARDNESS TESTER; S/N 1123 FAMCO MODEL WR81 HEAVY DUTY BENCH ARBOR PRESS MFG. UNKNOWN BENCH ARBOR PRESS


513-241 -9701

Page2

Catalog for Auction:BAITY'S PRECISION MACHINING

Lot Num Qty. Description Lot Num

61 1 30" X 42" X 32-1/2" HIGH X 3/4" THICK STEEL 81 TOP PLATE HEAVY DUTY STEEL BENCH **DELAYED REMOVAL P/U 2/12/2018** 82

62 1 13-DRAWER CRAFTSMAN TOOL CHEST W/ CONTENTS

63 1 10-DRAWER CRAFTSMAN TOOL CHEST W/ 83 CONTENTS

64 1 6-DRAWER WATERLOO TOOL CHEST W/ CONTENTS 84

65 1 JOBOX MODEL 652990 JOBSITE TOOL 85 CHEST W/ MISC. CLAMPS, TOOLS & TOOL 86 ITTAND ITT

66 3 MISC. TYPE SHOP VACS 88 67 1 SCHMACHER MODEL SE-4020 PORTABLE 89

BATTERY CHARGER 90 68 1 BANDING DISPENSER W/ TOOLS 91 69 1 R&D FOUNTAIN INDUSTRIES MODEL 55443 92

DRUM MOUNT PARTS CLEANER 70 3 TWO-WHEEL HAND TRUCKS 93 71 1 (LOT) BUSSWAY SWITCHES, SAFETY

SWITCHES, ELECTRICAL WIRE W/ PALLET RACK 94

72 1 (LOT) SHIPPING CENTER W/ BENCHES, 95 SHELVING, DESK, BOXES & SHIPPING SUPPLIES 96

73 1 2,250 LB. CAP. X 48" X 48" PLATFORM TOLEDO STYLE 31-1501GA HONEST 97 WEIGHT NO SPRING SHIPPING SCALE

74 1 (LOT) (2) DOUBLE SIDED STEEL RACKS W/ 98 SQUARE, FLAT & ROUND STOCK OF ALUMINUM, STEEL, COPPER STOCK & (1) PORTABLE RACK W/ RELATED STOCK; (2) 99 RACK SIZES APPROX. 109" X 46" X 91" HIGH, 100 (1) PORTABLE RACK APPROX. 28" X 120" X 76" HIGH

75 1 2" WIDE BEAUMONT METAL WORKS 101 CUSTOM BUil T VARIABLE SPEED HORIZONTAL BUFFING/ SANDING MACHINE

76 1 6" BELT X 12" DISC POWERMATIC MODEL 102 30A CABINET STYLE COMBINATION 103 SANDER; S/N 430A450

77 1 6" BELT X 12" DISC JET MODEL JSG6 FLOOR 104 COMBINATION SANDER; S/N 4020102

78 1 6" BELT CRAFTSMAN STAND MOUNTED 105 VERTICAL BELT SANDER

79 CUTTERMASTER MODEL FCG-30 BENCH 106 MOUNTED TOOL SHARPENER; S/N 18718

80 6" HAMMOND MODEL D-6 DOUBLE END 107 STAND MOUNTED CARBIDE TOOL GRINDER; SIN 14390

Qty. Description

1 6" DAREX DOUBLE END PEDESTAL DRILL SHARPENER

1 14" ORBIT MACHINE TOOLS MODEL OR1412F FIVE-SPEED FLOOR DRILL; SIN D2-700061

1 14" ORBIT MACHINE TOOLS MODEL OR1412F FIVE-SPEED FLOOR DRILL; S/N 02-600167 6" DOUBLE END FLOOR GRINDER

1 BALDOR DOUBLE END FLOOR GRINDER 1 BALDOR DOUBLE END FLOOR GRINDER 1 BALDOR DOUBLE END FLOOR GRINDER

DOUBLE END FLOOR GRINDER DOUBLE END FLOOR GRINDER DOUBLE END FLOOR GRINDER SINGLE END FLOOR GRINDER VIBRA HONE VIBRATORY POLISHING MACHINE

1 RAYTECH MODEL TD-15 VIBRATORY POLISHING BOWL W/ RAYTECH MODEL FT-75 CONTROL BASE SKID OF MISC. MEDIA

1 25 TON DAKE MODEL FORCE 25 ELECTRIC / HYDRAULIC H-FRAME PRESS; S/N 193698

1 20 TON NUGIER MODEL H20-6 ELECTRIC/ HYDRAULIC H-FRAME PRESS; S/N 997

1 STARTRITE MODEL H175 PORTABLE HORIZONTAL BAND SAW; S/N N/A

1 2,250 DEGREE FAHRENHEIT CRESS MODEL C1220 ELECTRIC TOOLROOM FURNACE; S/N 9904 W/ PORTABLE CART

1 TRENT ELECTRIC FURNACE W/ STAND 1 EMPIRE MODEL EF-2430 ABRASIVE BLAST

CABINET; S/N C-6908, W/ EMPIRE DUST COLLECTOR

1 EXAIR 55-GALLON DRUM PORTABLE "CHIP TRAPPER" REVERSIBLE PNEUMATIC DRUM CHIP VAC SHOP BUil T HYDRAULIC VACUUM PUMP

1 5,000 LB. CAP. HAULMASTER HAND HYDRAULIC PALLET JACK

1 5,000 LB. CAP. HAULMASTER HAND HYDRAULIC PALLET JACK

1 5,500 LB. MUL TITON HAND HYDRAULIC PALLET JACK

1 CAPACITY UNKNOWN HAND HYDRAULIC PALLET JACK 24" WIDE X 9' LONG X 19" HIGH STEEL STOCK TRANSFER CART

Lot Num

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127 128 129 130 131 132 133

Qty.

1

1

1

1

1

1

1

1

6

1

1


513-241 -9701

Page 3


Description Lot Num Qty. Description

2,000 LB. CAP. ECONOMY MODEL ET 134 15 PIECES (APPROX.) 48" X 10' (APPROX) FOUR-POST CRANK TYPE DIE LIFT CART STEEL CHAIN LINK STEEL TOOLROOM CRIB TWO-DOOR STORAGE CABINET W/ SHOP WITH DOOR AND (9) UPRIGHTS SUPPLIES 135 25 APPROX. 3-1/2" FACE X 108" LONG 72-BIN TOOLING CABINET W/ MISC. RIDG-U-RACK PALLET RACK STEP BEAMS TOOLING 136 70 (APPROX.) MISCELLANEOUS SIZE STEEL 84-BIN TOOLING CABINET W/ MISC. GRATED PARTS BASKETS WITH (7) TOOLING MISCELLANEOUS SIZE STEEL BASKET 41-BIN TOOLING CABINET W/ MISC. CARTS TOOLING 137 1 28' ALL AMERICAN LADDER ALUMINUM 3-DRAWER TOOLING CABINET WITH EXTENSION LADDER TOOLING AND HARDWARE 138 12' WERNER FIBERGLASS STEP LADDER 8-DRAWER TOOLING CABINET WITH 139 10' WERNER FIBERGLASS STEP LADDER TOOLING AND HARDWARE 140 1 6' WERNER FIBERGLASS STEP LADDER ?-DRAWER TOOLING CABINET WITH 141 1 6' WERNER FIBERGLASS STEP LADDER TOOLING AND HARDWARE 142 36" HIGH ALUMINUM UTILITY STEP STOOL STEEL SHELVING WITH HARDWARE AND 143 4-STEP COTTERMAN PORTABLE SHOP SUPPORT ITEMS WAREHOUSE LADDER HEAVY DUTY STEEL PORTABLE PICK RACK 144 4 (3) SECTIONS 36" X 108" X 108" HIGH WITH APPROX. (90) DRAWERS TOOLING, (APPROX.) AND (1) SECTION 42" X 108" X HARDWARE AND OTHER RELATED ITEMS 108" HIGH (APPROX.) PALLET RACK AND DOUBLE SIDED PORTABLE BIN PICK CART CONTENTS, WITH SHOP SUPPORT WITH HARDWARE SUPPLIES AND OTHER RELATED ITEMS SECTIONS 42" X 108" X 96" HIGH PALLET 145 8 LIGHT DUTY UTILITY SHOP CARTS RACK AND CONTENTS, WITH 146 8 LIGHT DUTY UTILITY SHOP CARTS MISCELLANEOUS OFFICE FURNITURE, 147 6 MISCELLANEOUS TYPE STEEL SHOP TABLES, AND SHOP SUPPORT EQUIPMENT CARTS (LOT) MISCELLANEOUS STEEL CUT OFFS 148 1 (LOT) MISCELLANEOUS SHOP CARTS WITH WOOD CRATE 149 1 (LOT) MISCELLANEOUS SHOP CARTS (LOT) MISCELLANEOUS STEEL CUT OFFS 150 1 96" X 84" STEEL FRAME PORT ABLE WITH WOOD CRATE PLEXIGLASS SAFETY GUARD (LOT) MISCELLANEOUS STEEL CUT OFFS 151 1 (LOT) MISCELLANEOUS SQUARE, ROUND, WITH WOOD CRATE FLAT STOCK OF ALUMINUM, BRASS, STEEL (LOT) MISCELLANEOUS STEEL CUT OFFS STOCK, WITH (2) STOCK RACKS WITH WOOD CRATE 152 20 DRUMS MISCELLANEOUS STEEL, BRASS,

1 (LOT) MISCELLANEOUS STEEL CUT OFFS AND ALUMINUM SHAVINGS WITH WOOD CRATE 153 EN PAC 55 GALLON DRUM POLY-DOLLY

1 (LOT) MISCELLANEOUS A_LUMINUM AND DRUM CART WITH MEGO DRUM CART STAINLESS STEEL CUT OFFS WITH WOOD 154 300 AMP HOBART MODEL RC-301 WELDING CRATE POWER SOURCE; S/N 88WS04245, WITH

1 (LOT) MISCELLANEOUS STEEL CUT OFFS HOBART 2200 WIRE FEEDER WITH WOOD CRATE 155 1 250 AMP MILLER DIALARC HF CONSTANT

1 SKID ALUMINUM FLAT STOCK CURRENT AC/DC ARC WELDING POWER SKID STEEL PIPE SOURCE; S/N JC649672, WITH PRECISE CAT SKID MISCELLANEOUS STEEL PLATE NO. 7136 COOLANT CIRCULATION SYSTEM

1 SKID MISCELLANEOUS BRASS CUT OFFS 156 1 300 AMP MILLER SHOPMASTER 300 AC/DC 1 SKID MISCELLANEOUS STEEL CUT OFFS CC/CV AC/DC ARC WELDING POWER

SKID MISCELLANEOUS STEEL AND PARTS SOURCE; S/N KE607711, WITH 24 VOLT SKID MISCELLANEOUS STEEL AND PARTS MILLER MODEL S-22A CONSTANT SPEED

WIRE FEEDER

CINCINNATI IND. AUCTIONEERS, INC. Page4 2020 DUNLAP STREET CINCINNATI, OH 45214

513-241-9701


Lot Num Q~. Descrii:,tion Lot Num Qtl, Descrii:,tion

157 300 AMP MILLER MILLERMATIC 300 179 1 6" X 12" MYFORD OD GRINDER; S/N 250262 3-PHASE WIRE WELDER; S/N LB138597, 180 1 CINCINNATI MILACRON MONOSET CUTTER WITH MIG SPOOL GUN GRINDER; S/N 3152A0176-0075

158 400 AMP THERMAL ARC FABSTAR 4030 181 1 6" X 12" MFG UNKNOWN HAND FEED CONSTANT VOLTAGE DC POWER SOURCE; SURFACE GRINDER; S/N 61523 SIN 199P920734, WITH THERMAL ARC 182 1 YUASA MODEL RX-614 HAND FEED MODEL 2210 WIRE FEEDER SURFACE GRINDER; SIN 61464 **NOTICE -

159 SHOP BUILT HEAVY DUTY PORTABLE OUT OF SERVICE - NEEDS MOTOR** WELDED STEEL WELDER /TANK STATION 183 1 (LOT) MISCELLANEOUS GRINDING WHEELS

160 1 KNACK PORTABLE TWO-DOOR FLIP FRONT ON PEG BOARD DOOR WELDING STORAGE CABINET WITH 184 1 SEVEN-DRAWER VIDMAR STYLE CABINET MISCELLANEOUS WELDING SUPPLIES AND CONTENTS WITH TOOLHOLDERS, VISE

161 1 GE MINI FRIDGE WITH WELDING RODS JAWS, TOOLING AND OTHER RELATED 162 1 OXY-ACTEYLENE CART WITH HOSE, ITEMS

GAGES, AND TORCH 185 1 5 HP TORIT DONALDSON MODEL 200 163 1 VICTOR MODEL VCM100 TRACK TORCH PORTABLE DUST COLLECTOR 164 1 48" X 50" X 38" HIGH X 1" THICK STEEL TOP 186 1 DCE MODEL UMA102G1AD STATIONARY

PLATE HEAVY DUTY PORTABLE STEEL DUST COLLECTOR FRAME WELDING TABLE WITH 5-1/2" VISE 187 1 AERCOLOGY MODEL E700 FUME I SMOKE

165 1 48" X 48" X 37" HIGH X 3/4" THICK STEEL COLLECTOR TOP PLATE HEAVY DUTY STEEL FRAME 188 2007 STAR MODEL SB-16D SWISS TYPE WELDING TABLE CNC SCREW MACHINE; SIN 0388

166 1 46-314" X 48" X 38" HIGH X 718" THICK STEEL 189 STAR MODEL ASO-16 AUTOMATIC BAR TOP PLATE HEAVY DUTY STEEL FRAME FEEDER; S/N J0700004 (NEW 8-2007) WELDING TABLE 190 2004 CITIZEN CINCOM MODEL L-32 VII

167 1 35" X 62-1/2" X 34" HIGH HEAVY DUTY STEEL SWISS TYPE CNC SCREW MACHINE; SIN FRAME AND TOP LAY-OUT TABLE V13180 **SUBJECT TO OVERALL BID AT LOT

168 2 (1) 36" X 38-112" X 34" HIGH AND (1) 23" X 24" 193** X 30" HEAVY DUTY STEEL FRAME AND TOP 191 COOL BLASTER MODEL CB150 COOLANT BENCHES SYSTEM **SUBJECT TO OVERALL BID AT

169 1 (LOT) MISCELLANEOUS WELDING LOT 193** SUPPLIES WITH FOUR-DOOR CABINET 192 IEMCA FEEDER BOSS 432137 MAGAZINE

170 1 17" X 40" OSAMA SR. MODEL SJ-174OG BAR FEEDER; S/N A05020401 **SUBJECT TO GEARED HEAD ENGINE LATHE; SIN 841215 OVERALL BID AT LOT 193**

171 1 QUICK CHANGE TOOL POST HOLDER WITH 193 OVERALL LOTS 190, 191 , 192 TOOLHOLDERS 194 1998 CITIZEN CINCOM MODEL L32 VII

172 1 SUNNEN MODEL MBB-1660 PRECISION SWISS TYPE CNC SCREW MACHINE; SIN HONING MACHINE; SIN 3V1-94225 V6670 **SUBJECT TO OVERALL BID AT LOT

173 1 (LOT) HONE SUPPLIES WITH STAND 197** 174 1 2 HP BRIDGEPORT MODEL EZ-TRAK-SX 195 1 COOL BLASTER HD COOLANT SYSTEM

CNC VERTICAL MILLING MACHINE; SIN **SUBJECT TO OVERALL BID AT LOT 197** 261134 196 12' IEMCA FEEDER BOSS 542 CNC/37

175 1 2 HP BRIDGEPORT VERTICAL MILLING MAGAZINE BAR FEEDER; SIN 98100518 MACHINE; S/N 133164 **SUBJECT TO OVERALL BID AT LOT 197**

176 1 WEBB MODEL 3VH VERTICAL MILLING 197 OVERALL LOTS 194, 195, 196 MACHINE; S/N 3253 198 1 10-DRAWER KENNEDY MAPLE TOP

177 2 HP ALLIANT MODEL 42VC VERTICAL TOOLING CABINET AND CONTENTS WITH MILLING MACHINE; S/N 74055916 MISCELLANEOUS TOOLING, TOOLHOLDERS,

178 1 BROWN AND SHARPE NO. 1 OD GRINDER; COLLETS AND OTHER RELATED ITEMS S/N 6251370

Lot Num

199

200

201

202 203

204

205

206

207

208

208A 209

210

211

212

213

214

215

216

217

218

219

220

221

222


513-241-9701

Page5


Qty. Description Lot Num

(LOT) LARGE ASSORTMENT COLLETS WITH 223 PORTABLE COLLET RACK 10 HP AMERICAN IMC HORIZONTAL TANK 223A AIR COMPRESSOR 224 SULLAIR MODEL SRD40AC R22 REFRIGERATED AIR DRYER 224A HORIZONTAL TANK AIR RECIEVING TANK 225 10 HP SULLLAIR MODEL ES6-10H-ACAC230 AIR COMPRESSOR; SIN E698001897 226 5 HP INGERSOLL RAND MODEL T30 VERTICAL TANK INDUSTRIAL AIR 226A COMPRESSOR; SIN 680026 12" X 12" HYD-MECH MODEL H-12A AUTOMATIC HORIZONTAL BAND SAW; SIN 227 A694231H 2000 MUBEA MODEL HIW 5501510 228 HYDRAULIC IRONWORKER; SIN 161 (LOT) STORAGE CABINETS AND CONTENTS 229 WITH SHOP RELATED SUPPLIES 2001 HAAS MODEL VF-3B CNC VERTICAL 230 MACHINING CENTER; SIN 25253 15 KVA FEDERAL PACIFIC TRANSFORMER 231 1999 HAAS MODEL VF4 CNC VERTICAL MACHINING CENTER; SIN 25253

17 CAT 40 TOOLHOLDERS MOUNTED IN TOOL CHANGER 1992 HAAS MODEL VF2 CNC VERTICAL MACHINING CENTER; SIN 1586

9 CAT 30 TAPER TOOLHOLDERS MOUNTED IN TOOL CHANGER HAAS 4TH AXIS WITH TAILSTOCK AND SERVO CONTROL; SIN 216013

48 CAT 40 TOOLHOLDERS WITH HUOT TOOLSCOOT CART

48 CAT 40 TAPER TOOLHOLDERS WITH HUOT TOOLCSOOT CART



32 CAT 40 TAPER TOOLHOLDERS WITH HUOT TOOLCSOOT CART MOUNTED TOOLHOLDER CHANGERS WITH STEEL BENCH AND VISE RUSTLICK MODEL SC3000 CNC SKIMMER I TRAMP OIL SEPERATOR 2010 OKUMA TATUNG MODEL ES-L6II CNC TURNING CENTER; SIN D1565

1 6' IEMCA PRODIGY 551-E MAGAZINE BAR FEEDER; SIN A09112702

232 233 234 235 236 237 238 239 240 241 242 243 244

245

246

247

248

249

250

Qty. Description

1 2004 OKUMA TATUNG BB MODEL ED-L10 CNC TURNING CENTER; SIN P0171

1 KVA UNKNOWN ACME TRANSFORMER 1 1999 OKUMA CROWN MODEL 762S-BB CNC

TURNING CENTER; SIN 1040 1 KVA UNKNOWN ACME TRANSFORMER 1 OKUMA HOWA MODEL ACT-15 CNC

TURNING CENTER; SIN 00108 1 1990 OKUMA MODEL LB-15BB CNC

TURNING CENTER; SIN 9983 1 TWO-DOOR AKRO BIN HANGING STORAGE

CABINET WITH MISCELLANEOUS INDEXABLE INSERTS

1 6" KURT CLUSTERTOWER WITH (4) KURT DOUBLE LOCK MILL VISES

1 8" KURT MODEL PT800A SUPER DUTY PRECISION MILL VISE

1 6" KURT MODEL D688 HEAVY DUTY PRECISION MILL VISE



1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" KURT PRECISION MILL VISE 1 6" JIR PRECISION MILL VISE 1 6" SHARS PRECISION DOUBLE LOCK MILL

VISE 4" SHARS PRECISION DOUBLE LOCK MILL VISE 4" SHARS PRECISION DOUBLE LOCK MILL VISE 4" SHARS PRECISION DOUBLE LOCK MILL VISE 4" SHARS PRECISION DOUBLE LOCK MILL VISE 4" SHARS PRECISION DOUBLE LOCK MILL VISE 4" SHARS PRECISION DOUBLE LOCK MILL VISE


513-241 -9701

Page6


Lot Num Qty. Description Lot Num

251 1 4" SHARS PRECISION DOUBLE LOCK MILL 284 VISE 285

252 1 4" SHARS PRECISION DOUBLE LOCK MILL 286 VISE

253 1 4" SHARS PRECISION DOUBLE LOCK MILL 287 ~SE 2~

254 1 4" SHARS PRECISION DOUBLE LOCK MILL VISE

255 1 4" KURT PRECISION DOUBLE LOCK MILL VISE 289

256 1 4" KURT PRECISION MILL VISE 257 1 4" KURT PRECISION MILL VISE

258 1 4" KURT PRECISION MILL VISE 290 259 260

261

262 263 264 265

266 267

268

269 270 271

272

273

274

275

276 277 278 279 280 281 282

283

1 3-1/2" KURT SIDEWINDER MILL VISE 1 6" BRIDGEPORT MACHINE VISE 1 (LOT) MISCELLANEOUS SIZE AND TYPE

MACHINE VISES 1 (LOT) VISE SWIVEL BASES 1 16" INDEXABLE ROTARY TABLE

1 12" YUASA INDEXABLE ROTARY TABLE 1 6" MANHATTAN MODEL 910213 INDEXABLE

DIVIDING HEAD 1 10" X 15" T-SLOTTED INDEXABLE TABLE 1 10" THREE-JAW CHUCK WITH ROYAL

COLLET CHUCK 3 (1) 8" THREE-JAW CHUCK WITH (2) 6 11

THREE-JAW CHUCKS 2 8" THREE-JAW CHUCKS 2 8" THREE-JAW CHUCKS 2 5C COLLET INDEXES WITH 5C SPIN

FIXTURE

THE MAC TYPE V35 PRECISION GRINDER WITH GRINDING WHEELS YUASA MODEL 550-001 RADIUS DRESSER

(LOT) MISCELLANEOUS MACHINE ACCESSORIES SINE PLATE, CHASER GRINDING FIXTURE, AND (2) TAIL STOCKS (LOT) MISCELLANEOUS SIZE JACOBS

MORSE TAPER CHUCKS (LOT) LIVE CENTERS (LOT) QUICK CHANGE TOOLHOLDERS (LOT) NEW AND USED CARBIDE END MILLS

1 (LOT) MISCELLANEOUS SPRING COLLETS 1 (LOT) MISCELLANEOUS SPRING COLLETS 1 (LOT) 5C COLLETS WITH COLLET STAND 1 (LOT) MISCELLANEOUS KEYWAY BROACHS

AND BROACH GUIDES 1 (LOT) S.P.V TAPPING HEAD WITH

INDEXABLE BORING HEAD AND BEAVER TOOLHOLDER

291

292

293

294

295

296

297 298

299

300 301

302

303 304

305

306

307

Qty. Description

1 MODEL PF PUNCH FORMER DI-ACRO SPRING WINDER

1 BRIDGEPORT STYLE R8 RIGHT ANGLE ATTACHMENT 6" X 12" MAGNETIC CHUCK

5 (4) 36" X 72" X 34" HIGH MAPLE TOP WORK

BENCHES WITH (1) 30" X 72" X 34" HIGH BENCH AND PLYWOOD **DELAY REMOVALPICK UP 2-13-2018** (LOT) CABINETS AND SHELVING WITH MACHINE ACCESSORIES, CHUCK JAWS, TOOLING AND OTHER RELATED ITEMS

5 MISCELLANEOUS DRILL INDEX CABINETS WITH TOOLING (LOT) MISCELLANEOUS PARALLELS, V-BLOCKS, RISER BLOCKS AND ANGLE PLATES HEAVY DUTY STEEL BENCH WITH WOOD BENCH

1 (LOT) MISCELLANEOUS TOOLING AND TOOLHOLDERS WITH STEEL A-FRAME CART

1 {LOT) MISCELLANEOUS TOOLING AND TOOLHOLDERS WITH STEEL A-FRAME CART

1 (LOT) MISCELLANEOUS CHUCK JAWS WITH STEEL A-FRAME CART

6 (5) PORTABLE AND (1) STATIONARY HOLD DOWN AND CHUCK JAW STANDS

1 SHOP BUILT STEEL GRATE STEP STAND 1 WOOD CRATE WITH MISCELLANEOUS

MACHINE ACCESSORIES 1 SKID MISCELLANEOUS ALUMINUM 1 SKID MISCELLANEOUS ALUMINUM 1 SKID MISCELLANEOUS CHUCK JAWS AND

TOOLING 1 25 HP SULLIVAN PALATEK MODEL 25-D4

HORIZONTAL TANK AIR COMPRESSOR; S/N 01E007 UL TRAROC AIR DRYER

15 HP DEVILBISS MODEL VAV5060 HORIZONTAL TANK AIR COMPRESSOR; S/N 1160 **LOCATED IN SHED OUTSIDE** 3,000 LB. TOYOTA MODEL 42-6FGCU15 LP GAS SOLID TIRE TWO-STAGE LIFT TRUCK; SIN 65321 **NO TANK - PROPERTY OF PROPANE CO** **DELAY REMOVAL- PICK UP 2-16-2018**

1 1/2 YARD CAPACITY MECO PORTABLE SELF DUMPING HOPPER 1/2 YARD CAPACITY MECO PORTABLE SELF DUMPING HOPPER


513-241-9701


Lot Num Qty. Description

308 1/2 YARD CAPACITY MEGO PORTABLE SELF DUMPING HOPPPER

309 GLOBAL FORKLIFT STEEL DRUM LIFTING ATTACHMENT WITH STEEL SAW HORSES

310 1 (LOT) SHOP STOOLS 311 2 PEDESTAL AIR CIRCULATORS WITH

UTITIL Y FANS 312 3 48" DIAMETER FORMICA TOP BREAKROOM

TABLES 313 10 STEEL ROD FRAME BREAK ROOM CHAIRS 314 1 (LOT) MISCELLANEOUS BREAKROOM

SUPPLIES AND APPLIANCES 315 2 HEAVY DUTY STEEL CARTS 316 1 HOLDING REFRIGERATOR 317 1 HOT POINT REFRIGERATOR 318 1 SYMPHONIC TV/ VHS SET WITH DRY

ERASE BOARD

Lot Num Qty. Description

Page7

Documents

PUBLIC AUCTION - secure-s3.serverdata.com...BAITY'S PRECISION MACHINING 247 Old Weaverville Rd., Woodfin, NC 28804 THURSDAY, FEBRUARY 8, 2018-9:00 AM REGISTRATION: All Bidders must