Embed Size (px)
Citation preview
Supplementary instructionsMounting bosses and adapters
Document ID:
32036
Contents
1 Product description
2 Welded socket - universal
2.1 Thread. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Clamp according to DIN 32676, ISO 2852/316L . . . . . 5
2.3 Hygienic fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Bolting acc. to DIN 11851 . . . . . . . . . . . . . . . . . . . . . 11
2.5 Bolting acc. to DIN 11864-1 . . . . . . . . . . . . . . . . . . . 13
3 Welded socket - VEGABAR
3.1 VEGABAR 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2 VEGABAR 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.3 VEGABAR 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.4 VEGABAR 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.5 VEGABAR 52, 54 - Paper industry . . . . . . . . . . . . . . 20
4 Welded socket - Level switch
4.1 VEGASWING 51, 61, 63 . . . . . . . . . . . . . . . . . . . . . . 25
4.2 VEGAKON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5 Adapter
5.1 G¾ A on Clamp according to DIN 32676, ISO 2852 . . 27
5.2 G1½ A on Clamp according to DIN 32676, ISO 2852. 29
5.3 G1½ A on bolting acc. to DIN 11851 . . . . . . . . . . . . . 30
5.4 G1½ A on further hygienic fittings . . . . . . . . . . . . . . . 32
6 Welding instructions
7 Supplement
7.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2 Mounting bosses and adapters
1 Contents32036-EN-110223
1 Product description
Welded sockets are used for connection of level and presssure
sensors to the process. Depending on the version, the process fitting
is optional or belongs to the scope of delivery. Depending on the
version, accessory parts such as welding dummies and blind stoppers
are available.
Screwed adapters are used for adaptation of level and pressure
sensors with connection G¾ A or G1½ A to existing welded sockets.
Depending on the version, the seal is optional or belongs to the scope
of delivery.
Welded socket
Adapter
Mounting bosses and adapters 3
1 Product description
32036-EN-110223
2 Welded socket - universal
2.1 Thread
Welded socket G½ A acc. to DIN 3852-X
Art. no. 2.36839
Material 316L
2,5
mm
(0.1
")1
6,5
mm
(0.6
5")
G1/2
ø 32 mm(1.26")
ø 28 mm(1.1")
Fig. 1: Dimensions welded socket G½ A acc. to DIN 3852-X
Welded socket G¾ A acc. to DIN 3852-X
Art. no. 2.36840
Material 316L
2,5
mm
(0.1
")1
6,5
mm
(0.6
5")
ø 38 mm(1.5")
ø 33 mm(1.3")
G3/4
Fig. 2: Dimensions welded socket G¾ A acc. to DIN 3852-X
Welded socket G1 A acc. to DIN 3852-X
Art. no. 2.36841
Material 316L
Thread G½ A
Thread G¾ A
Thread G1 A
4 Mounting bosses and adapters
2 Welded socket - universal32036-EN-110223
2,5
mm
(0.1
")2
0,5
mm
(0.8
1")
ø 41 mm(1.61")
ø 47 mm(1.85")
G1
Fig. 3: Dimensions welded socket G1 A acc. to DIN 3852-X
Welded socket G1½ A acc. to DIN 3852-X
Art. no. 36842
Material 316L
2,5
mm
(0.1
")2
4,5
mm
(0.9
7")
ø 56 mm(2.21")
ø 65 mm(2.56")
G1 1/2
Fig. 4: Dimensions welded socket G1½ A acc. to DIN 3852-X
2.2 Clamp according to DIN 32676, ISO 2852/316L
Welded socket Clamp 1" PN16 DIN 32676, ISO 2852/316L
Product code ESTC.AXX
Material 316L
Seal (optional)
Material EPDM, FKM
Tension ring
Material 1.4301
Thread G1½ A
Clamp 1"
Mounting bosses and adapters 5
2 Welded socket - universal
32036-EN-110223
21
,5 m
m(0
.85
")
ø 22,6 mm(0.89")
ø 25,6 mm(1.01")
ø 50,5 mm(1.99")
Fig. 5: Dimensions welded socket Clamp 1" PN16 DIN 32676, ISO 2852/316L
Welded socket Clamp 1½" PN16 DIN 32676, ISO 2852/316L
Product code ESTC.BXX
Material 316L
Seal (optional)
Material EPDM, FKM
Tension ring
Material 1.4301
21,5
mm
(0.8
5")
ø 35,6 mm(1.4")
ø 38,6 mm(1.52")
ø 50,5 mm(1.99")
Fig. 6: Dimensions welded socket Clamp 1½" PN16 DIN 32676, ISO 2852/316L
Welded socket Clamp 2" PN16 (ø 64 mm) DIN 32676, ISO 2852/
316L
Product code ESTC.CXX
Material 316L
Seal (optional)
Material EPDM, FKM
Clamp 1½"
Clamp 2"
6 Mounting bosses and adapters
2 Welded socket - universal32036-EN-110223
Tension ring
Material 1.4301
21,5
mm
(0.8
5")
ø 47,6 mm(1.87")
ø 51,6 mm(2.03")
ø 64 mm(2.52")
Fig. 7: Dimensions welded socket Clamp 2" PN16 (ø 64 mm) DIN 32676,
ISO 2852/316L
Welded socket Clamp 2½" PN16 (ø 77.5 mm) DIN 32676,
ISO 2852/316L
Product code ESTC.DXX
Material 316L
Seal (optional)
Material EPDM, FKM
Tension ring
Material 1.4301
28 m
m(1
.1")
ø 60,3 mm(2.37")
ø 64,1 mm(2.52")
ø 77,5 mm(3.05")
Fig. 8: Dimensions welded socket 2½" PN16 (ø 77.5 mm) DIN 32676, ISO 2852/
316L
Welded socket 3" PN16 (ø 91 mm) DIN 32676, ISO 2852/316L
Product code ESTC.EXX
Material 316L
Clamp 2½"
Clamp 3"
Mounting bosses and adapters 7
2 Welded socket - universal
32036-EN-110223
Seal (optional)
Material EPDM or FKM
Tension ring
Material 1.4301
28 m
m(1
.1")
ø 72,9 mm(2.87")
ø 76,7 mm(3,02")
ø 91 mm(3,58")
Fig. 9: Dimensions welded socket 3" PN16 (ø 91 mm) DIN 32676, ISO 2852/
316L
2.3 Hygienic fittings
Welded socket LA for compression nut
Product code ESTA.LAXXX
Material 316L
Seal (optional)
Material EPDM
Welding dummy
Product code DMONT.A
Material 1.4305
Blind stopper
Product code DMONT.B1
Material 316Ti
Hygienic fitting LA
8 Mounting bosses and adapters
2 Welded socket - universal32036-EN-110223
40
mm
(1.5
8")
ø 79,6 mm(3.13")
Rd 65 x 1/6
Fig. 10: Dimensions welded socket LA for compression nut
Welded socket LB for tension flange
Product code ESTA.LBXXX
Material 316L
Seal (optional)
Material EPDM
Welding dummy
Product code DMONT.C
Material 1.4305
Blind stopper
Product code DMONT.D
Material 316Ti
40
mm
(1.5
8")
ø 79,6 mm(3.13")
ø 72 mm(2.84")
ø 90 mm(1.54")
M6
Fig. 11: Dimensions welded socket LB for tension flange
Welded socket DRD
Product code ESTD.AAXX
Material 316L
Hygienic fitting LB
DRD connection
Mounting bosses and adapters 9
2 Welded socket - universal
32036-EN-110223
Seal (optional)
Material PTFE
20
mm
(0.7
9")
ø 84 mm (3.31")
ø 66 mm (2.6")
ø 105 mm (4.13")
M10
ø 125 mm (4.92")
ø 50 mm (1.97")
Fig. 12: Dimensions welded socket DRD
Welded socket conus DN 25
Product code ESTK.KAXX
Material 316L
Seal (optional)
Material EPDM
Rd 52 x 1/6
25
mm
(0.9
8")
ø 75 mm(2.95")
Fig. 13: Dimensions welded socket conus connection DN 25
Welded socket conus M52 x 2
Product code ESTK.KBXX
Material 316L
Seal (optional)
Material EPDM
Cone connection DN 25
Cone connectionM52 x 2
10 Mounting bosses and adapters
2 Welded socket - universal32036-EN-110223
M52 x 2
25
mm
(0.9
8")
23
mm
(0.9
1")
ø 80 mm(3.15")
Fig. 14: Dimensions welded socket conus connection M52x2
2.4 Bolting acc. to DIN 11851
Welded socket, bolting DN 25 according to DIN 11851
Product code ESTR.DA1X
Material 316L
Seal (optional)
Material FKM, EPDM, NBR
29
mm
(1.1
4")
ø 26 mm(1.02")
ø 31 mm(1.22")
Rd 52 x 1/6
Fig. 15: Dimensions welded socket, bolting DN 25 according to DIN 11851
Welded socket, bolting DN 40 according to DIN 11851
Product code ESTR.FA1X
Material 316L
Seal (optional)
Material FKM, EPDM, NBR
Bolting DN 25
Bolting DN 40
Mounting bosses and adapters 11
2 Welded socket - universal
32036-EN-110223
33
mm
(1.3
")
ø 43 mm(1.69")
ø 38 mm(1.5")
Rd 65 x 1/6
Fig. 16: Dimensions welded socket, bolting DN 40 according to DIN 11851
Welded socket, bolting DN 50 according to DIN 11851
Product code ESTR.GA1X
Material 316L
Seal (optional)
Material FKM, EPDM, NBR
Rd 78 x 1/6
35
mm
(1.3
8")
ø 50 mm(1.97")
ø 55 mm(2.17")
Fig. 17: Dimensions welded socket, bolting DN 50 according to DIN 11851
Welded socket, bolting DN 80 according to DIN 11851
Product code ESTR.IA1X
Material 316L
Seal (optional)
Material EPDM, NBR
Bolting DN 50
Bolting DN 80
12 Mounting bosses and adapters
2 Welded socket - universal32036-EN-110223
32
mm
(1.3
8")
ø 81 mm(3.19")
ø 87 mm(3.43")
RD 110 x 1/4
Fig. 18: Dimensions welded socket, bolting DN 80 according to DIN 11851
Welded socket, bolting DN 100 according to DIN 11851
Product code ESTR.JA1X
Material 316L
Seal (optional)
Material EPDM
54
mm
(2.1
3")
ø 100 mm(3.94")
ø 106 mm(4.17")
Rd 130 x 1/4
Fig. 19: Dimensions welded socket, bolting DN 100 according to DIN 11851
2.5 Bolting acc. to DIN 11864-1
Welded socket DN 40 acc. to DIN 11864-1
Product code ESTR.FBXX
Material 316L
Seal (optional)
Material FKM, EPDM or NBR
Bolting DN 100
Bolting DN 40
Mounting bosses and adapters 13
2 Welded socket - universal
32036-EN-110223
ø 38mm(1 1/2")
31
mm
(1 7
/ 32")
ø 41mm(1 39/64")
Rd 65 x 1/6
Fig. 20: Dimensions welded socket DN 40 acc. to DIN 11864-1
Welded socket DN 50 acc. to DIN 11864-1
Product code ESTR.GBXX
Material 316L
Seal (optional)
Material FKM, EPDM or NBR
ø 38 mm(1.5")
26
mm
(1.0
2")
ø 43 mm(1.69")
Rd 65 x 1/6
Fig. 21: Dimensions welded socket DN 50 acc. to DIN 11864-1
Bolting DN 50
14 Mounting bosses and adapters
2 Welded socket - universal32036-EN-110223
3 Welded socket - VEGABAR
3.1 VEGABAR 17
Welded socket G½ B acc. to ISO 228-1 - vessel
Product code ESMBR17.86*IXTX
Material 316Ti
21
mm
(0.8
3")
G1/2
ø 50 mm
(1.97")
Fig. 22: Dimensions welded socket G½ B acc. to ISO 228-1 - vessel
Welded socket G½ B acc. to ISO 228-1 - pipeline
Product code ESMBR17.86*AXVX
Material 316Ti
G1/2
21
mm
(0.8
3")
ø 30 mm(1.18")
Fig. 23: Dimensions welded socket thread G½ B acc. to ISO 228-1 - pipeline
Welded socket G1 B acc. to ISO 228-1
Product code ESMBR17.85*IXTX
Material 316Ti
Thread G½ B
Thread G1 B
Mounting bosses and adapters 15
3 Welded socket - VEGABAR
32036-EN-110223
21
mm
(0.8
3")
G 1
ø 30,1 mm
(1.19")
ø 50 mm
(1.97")
10,5
mm
(0.4
1")
Fig. 24: Dimensions welded socket G1 B acc. to ISO 228-1
Welded socket G1 aseptic
Product code ESMBR17.84*JXVX
Material 316L
25
,5m
m
(1")
12
,5m
m
(0.4
9")
G 1
ø 50mm
(1.97")
ø 29,3mm
(1.15")
Fig. 25: Dimensions welded socket G1 aseptic
3.2 VEGABAR 52
Welded socket thread G½ A acc. to EN 837
Product code ESMBR52.GVBKVX
Material 316L
Thread G1 hygienic
Thread G½ A
16 Mounting bosses and adapters
3 Welded socket - VEGABAR
32036-EN-110223
21
mm
(0.8
3")
G 1 1/2
ø 50 mm
(1.97")
Fig. 26: Dimensions welded socket thread G½ A acc. to EN 837
Welded socket thread G1 A according to DIN ISO 228-1
Product code ESMBR52.GCBKVX
Material 316Ti
40
mm
(1.5
8")
G1
ø 50 mm (1.97")
Fig. 27: Dimensions welded socket thread G1 A according to DIN ISO 228-1
3.3 VEGABAR 53
Welded socket G½ B acc. to ISO 228-1 - vessel
Product code ESMBR53.GFIXTX
Material 316Ti
Thread G1 A
Thread G½ B
Mounting bosses and adapters 17
3 Welded socket - VEGABAR
32036-EN-110223
21
mm
(0.8
3")
G1/2
ø 50 mm
(1.97")
Fig. 28: Dimensions welded socket G½ B acc. to ISO 228-1 - vessel
Welded socket G½ B acc. to ISO 228-1 - pipeline
Product code ESMBR53.GFAXVX
Material 316Ti
G1/2
21
mm
(0.8
3")
ø 30 mm(1.18")
Fig. 29: Dimensions welded socket G½ B acc. to ISO 228-1 - pipeline
Welded socket G1 B acc. to ISO 228-1
Product code ESMBR53.GCIXTX
Material 316Ti
21 m
m
(0.8
3")
G 1
ø 30,1 mm
(1.19")
ø 50 mm
(1.97")
10
,5 m
m
(0.4
1")
Fig. 30: Dimensions welded socket G1 B acc. to ISO 228-1
Thread G1 B
18 Mounting bosses and adapters
3 Welded socket - VEGABAR
32036-EN-110223
Welded socket G1 B aseptic
Product code ESMBR53.GEJXVX
Material 316L
25
,5m
m
(1")
12
,5m
m
(0.4
9")
G 1
ø 50mm
(1.97")
ø 29,3mm
(1.15")
Fig. 31: Dimensions welded socket G1 B aseptic
3.4 VEGABAR 54
Welded socket G½ A acc. to ISO 228-1
Product code ESMBR54.GBAXVX
Material 316L
Seal (optional)
Material Kalrez
G1/2
ø 18,5mm(47/64")
21
mm
(53/ 6
4")
10
,5m
m(1
3/ 3
2")
ø 30mm(1 3/16")
Fig. 32: Dimensions welded socket G½ A acc. to ISO 228-1
Welded socket G¾ A acc. to DIN 3852-X
Product code ESMBR54.GAEXVX
Material 316L
Thread G1 B hygienic
Thread G½ A
Thread G¾ A
Mounting bosses and adapters 19
3 Welded socket - VEGABAR
32036-EN-110223
Seal (optional)
Material Viton, EPDM, Kalrez
22
,5 m
m
(0.8
9")
ø 40 mm
(1.58")
G3/4
Fig. 33: Dimensions welded socket G¾ A acc. to DIN 3852-X
Welded socket G1 A acc. to ISO 228-1
Product code ESMBR54.GCIXTX
Material 316Ti
21
mm
(53/ 6
4")
ø 47mm
(1 27/32")
G 1
ø 40mm
(1 37/64")
Fig. 34: Dimensions welded socket G1 A acc. to ISO 228-1
3.5 VEGABAR 52, 54 - Paper industry
Welded socket M30 x 1.5
Product code ESMBR54.BFGXVX
Material 316L
Seal (optional, mounting on pressure transmitter)
Material Viton
Welding dummy
Product code DMONT.G
Material brass
Thread G1 A
M30 x 1.5
20 Mounting bosses and adapters
3 Welded socket - VEGABAR
32036-EN-110223
Blind stopper
Material 316Ti
M30x1,5
15
mm
(0.5
9")
23
mm
(0.9
1")
ø 40mm
(1.58")
ø 25mm
(0.98")
Fig. 35: Dimensions welded socket M30 x 1.5
Welded socket M30 x 1.5
Product code ESMBR54.BSGXVX
Material 316L
Seal (optional)
Material Viton
Welding dummy
Product code DMONT.G
Material brass
Blind stopper
Material 316Ti
M30x1,5
15
mm
(0.5
9")
23
mm
(0.9
1")
ø 40mm
(1.58")
ø 25mm
(0.98")
Fig. 36: Dimensions welded socket M30 x 1.5 for headbox
M30 x 1.5 for headbox
Mounting bosses and adapters 21
3 Welded socket - VEGABAR
32036-EN-110223
Welded socket M44 x 1.25
Product code ESMBR**.B*MXVX
Material 316L
Welding dummy
Product code DMON T.F
Material brass
Blind stopper
Product code DMONT.H
Material 316Ti2
1m
m(0
.83
")
ø 60mm(2.36")
M44x1,25
Fig. 37: Dimensions welded socket M30 x 1.25
Welded socket M48 x 1.5
Product code ESMBR52.DGSXVX
Material 316L
M44 x 1.25
M48 x 1.5
22 Mounting bosses and adapters
3 Welded socket - VEGABAR
32036-EN-110223
M 48 x 1,5
97
mm
(3
.82
")
79 mm (3.11")
10
2 m
m (
4.0
2")
Fig. 38: Dimensions welded socket M48 x 1.5
Welded socket G1" suitable for PASVE
Product code ESMBR54.VPHXVX
Material 316L
Dummy
Product code DMONT.S
Material brass
Blind stopper
Product code DMONT.P
Material 316Ti
G1" suitable for PASVE
Mounting bosses and adapters 23
3 Welded socket - VEGABAR
32036-EN-110223
ø 45 mm(1.77")
G1
70
mm
(2
.76
")
38
,5 m
m
(1.5
2")
Fig. 39: Dimensions welded socket G1" suitable for PASVE
Welded socket PMC 1"
Product code ESMBR54.PCDXVX
Material 316L
25
mm
(0.9
8")
ø 8
mm
(0.3
2")
17
,6 m
m(0
.69
")
33,4 mm (1.32")
26,7 mm (1.05")
Fig. 40: Dimensions welded socket PMC 1"
PMC 1"
24 Mounting bosses and adapters
3 Welded socket - VEGABAR
32036-EN-110223
4 Welded socket - Level switch
4.1 VEGASWING 51, 61, 63
Welded socket G¾ A acc. to DIN 3852-X
Product code ESTSG.1GBX1
Material 316L
Seal
Material FKM, EPDM
26
mm
(1
.02
")
ø 53 mm(2.09")
ø 32 mm(1.26")
G 3/4
Fig. 41: Dimensions welded socket G¾ A acc. to DIN 3852-X
Welded socket G1 A acc. to DIN 3852-X
Product code ESTSG.1GAX1
Material 316L
Seal
Material FKM, EPDM
29
mm
(1.1
4")
G 1
ø 60 mm
(2.36")
ø 39 mm
(1.54 ")
Fig. 42: Dimensions welded socket G1 A acc. to DIN 3852-X
Thread G¾ A
Thread G1 A
Mounting bosses and adapters 25
4 Welded socket - Level switch
32036-EN-110223
4.2 VEGAKON
Welded socket G1 A acc. to DIN 3852-X
Product code ESTKN.1GA
Material 316Ti
21
mm
(0.8
3")
ø 47 mm
(1.85")
G 1
ø 40 mm
(1.58")
Fig. 43: Dimensions welded socket G1 A acc. to DIN 3852-X
Thread G1 A
26 Mounting bosses and adapters
4 Welded socket - Level switch32036-EN-110223
5 Adapter
5.1 G¾ A on Clamp according to DIN 32676,
ISO 2852
Adapter G¾ A according to DIN 3852-X on Clamp 1½" PN16
DIN 32676, ISO 2852/316L
Product code GEWADA-A.CG1
Material 316L
Seal (optional)
Material FKM, EPDM
22
,5 m
m
(0.8
9 "
)
G 3/4
ø 50,5 mm
(1.99")
ø 32 mm
(1.26")
Fig. 44: Dimensions adapter G¾ A according to DIN 3852-X on Clamp 1½"
PN16 DIN 32676, ISO 2852/316L
Adapter G¾ A according to DIN 3852-X on Clamp 2" PN16 (ø
64 mm) DIN 32676, ISO 2852/316L
Product code GEWADA-A.CA1
Material 316L
Seal (optional)
Material FKM, EPDM
Clamp 1½"
Clamp 2"
Mounting bosses and adapters 27
5 Adapter
32036-EN-110223
22
,5 m
m
(0.8
9")
G 3/4
ø 64 mm
(2.52")
ø 32 mm
(1.26")
Fig. 45: Dimensions adapter G¾ A according to DIN 3852-X on Clamp 2" PN16
(ø 64 mm) DIN 32676, ISO 2852/316L
Adapter G¾ A according to DIN 3852-X on Clamp 2½" PN16 (ø
77.5 mm) DIN 32676, ISO 2852/316L
Product code GEWADA-A.CD1
Material 316L
Seal
Material FKM, EPDM
22
,5 m
m
(0.8
9")
G 3/4
ø 77,5 mm
(3.05")
ø 32 mm
(1.26")
Fig. 46: Dimensions adapter G¾ A according to DIN 3852-X on Clamp 2½"
PN16 (ø 77.5 mm) DIN 32676, ISO 2852/316L
Adapter G¾ A according to DIN 3852-X on Clamp 3" PN16 (ø
77.5 mm) DIN 32676, ISO 2852/316L
Product code GEWADA-A.CE1
Material 316L
Seal
Material FKM, EPDM
Clamp 2½"
Clamp 3"
28 Mounting bosses and adapters
5 Adapter32036-EN-110223
22
,5 m
m
(0.8
9")
G 3/4
ø 91 mm
(3.58")
ø 32 mm
(1.26")
Fig. 47: Dimensions adapterG¾ A according to DIN 3852-X on Clamp 32" PN16
(ø 91 mm) DIN 32676, ISO 2852/316L
Adapter G¾ A according to DIN 3852-X on Clamp 4" PN16 (ø
119 mm) DIN 32676, ISO 2852/316L
Product code GEWADA-A.CC1
Material 316L
Seal
Material FKM, EPDM
22
,5 m
m
(0.8
9")
G 3/4
ø 119 mm
(4.69")
ø 32 mm
(1.26")
Fig. 48: Dimensions adapter G¾ A according to DIN 3852-X on Clamp 4" PN16
(ø 119 mm) DIN 32676, ISO 2852/316L
5.2 G1½ A on Clamp according to DIN 32676,
ISO 2852
Adapter G1½ A according to DIN 3852-X on Clamp 3" PN16 (ø
77.5 mm) DIN 32676, ISO 2852/316L
Product code GEWADA-B.CE1
Material 316L
Seal
Material FKM, EPDM
Clamp 4"
Clamp 3"
Mounting bosses and adapters 29
5 Adapter
32036-EN-110223
30
mm
(1 3
/ 16")
G 1 1/2
ø 55 mm
(2 11/64")
ø 91 mm
(3 37/64")
Fig. 49: Dimensions adapterG1½ A according to DIN 3852-X on Clamp 3" PN16
(ø 77.5 mm) DIN 32676, ISO 2852/316L
5.3 G1½ A on bolting acc. to DIN 11851
Adapter G1½ A acc. to DIN 3852-X on bolting DN 40 acc. to
DIN 11851
Product code GEWADA-A.RA1
Material 316L
Seal
Material FKM, EPDM2
2,5
mm
(0.8
9")
G 3/4
ø 56 mm
(2.21")
ø 32 mm
(1.26")
Fig. 50: Dimensions adapterG1½ A acc. to DIN 3852-X on bolting DN 40 acc. to
DIN 11851
Adapter G1½ A acc. to DIN 3852-X on bolting DN 50 acc. to
DIN 11851
Product code GEWADA-A.RB1
Material 316L
Bolting DN 40
Bolting DN 50
30 Mounting bosses and adapters
5 Adapter32036-EN-110223
Seal
Material FKM, EPDM
22
,5 m
m
(0.8
9 "
)
G 3/4
ø 68,5 mm
(2.70")
ø 32 mm
(1.26")
Fig. 51: Dimensions adapter G1½A acc. to DIN 3852-X on bolting DN 50 acc. to
DIN 11851
Adapter G1½ A acc. to DIN 3852-X on bolting DN 65 acc. to
DIN 11851
Product code GEWADA-A.RC1
Material 316L
Seal
Material FKM, EPDM
22
,5 m
m
(0.8
9")
G 3/4
ø 86 mm
(3.39")
ø 32 mm
(1.26")
Fig. 52: Dimensions adapterG1½ A acc. to DIN 3852-X on bolting DN 65 acc. to
DIN 11851
Adapter G1½ A acc. to DIN 3852-X on bolting DN 100 acc. to
DIN 11851
Product code GEWADA-A.RD1
Material 316L
Bolting DN 65
Bolting DN 100
Mounting bosses and adapters 31
5 Adapter
32036-EN-110223
Seal
Material FKM, EPDM
22
,5 m
m
(0.8
9")
G 3/4
ø 121 mm
(4.76")
ø 32 mm
(1.26")
Fig. 53: Dimensions adapter G1½ A acc. to DIN 3852-X on bolting DN 100 acc.
to DIN 11851
5.4 G1½ A on further hygienic fittings
Adapter G1½ A acc. to DIN 3852-X on DRD connection
Product code GEWADA-A.AA1
Material 316L
Seal
Material FKM, EPDM
22
,5 m
m
(0.8
9")
G 3/4
ø 65,8 mm
(2.59")
ø 54 mm
(2.13")
Fig. 54: Dimensions adapter G1½ A acc. to DIN 3852-X to DRD
Adapter G1½ A acc. to DIN 3852-X on Tuchenhagen DN 32
Product code GEWADA-A.TA3
Material 316L
Seal
Material EPDM
DRD connection
Tuchenhagen DN 32
32 Mounting bosses and adapters
5 Adapter32036-EN-110223
22
,5 m
m
(0.8
9")
G 3/4
ø 71 mm (2.8")
ø 84 mm (3.31")
ø 32 mm (1.26")
Fig. 55: Dimensions adapterG1½ A acc. to DIN 3852-X on TuchenhagenDN 32
Mounting bosses and adapters 33
5 Adapter
32036-EN-110223
6 Welding instructions
Information:
The following welding instructions are for information only. In general,
the relevant welding regulations must be noted. The AD leaflets must
also be noted when welding on pressure vessels.
When welding stainless steel, utmost cleanness is necessary. E.g. it is
not allowed to use rusty tools or screwed parts. Also make sure that no
mild steel is processed in the closer environment.
Use enought inert gase for tack-welding. Make sure that you use tack-
welding and not spot-welding. For tack-welding and welding, the
protective gas pure argon must be used.
The suitable welding dummy must be used to avoid the distortion of
the welded socket.
1
3
2
Fig. 56: Welding dummy
1 Welded socket
2 Dummy
3 Pipeline or vessel wall
It is generally recommended to divide the weld joint into several
segments.
Preparations
Welding dummy
Welding procedure
34 Mounting bosses and adapters
6 Welding instructions32036-EN-110223
8 1
5
3
72
6
4
Fig. 57: Segmental welding
After welding a segment, weld immediately the segment that lies
exactly opposite. Interrupt the welding process after welding two
segments until the weld joint cools or carefully cool the weld joint
yourself before you start welding again.
The pressure loading capacity depends on the quality of the welding
as well as the material of the welded socket. With threaded sockets,
the thread length must be used completely bearing.
Pressure bearing
Mounting bosses and adapters 35
6 Welding instructions
32036-EN-110223
7 Supplement
7.1 Technical data
General data
Material 316L corresponds to 1.4404 or 1.4435, 316Ti corresponds to 1.4571.
Max. process temperature on the welded socket, depending on the seal
- FKM -20 … +120 °C (-4 … +248 °F)
- FFKM -20 … +120 °C (-4 … +248 °F)
- EPDM -40 … +120 °C (-40 … +248 °F)
- EPDM cleaning temperature max.
1 h
-40 … +140 °C (-40 … +284 °F)
- NBR -20 … +105 °C (-4 … +221 °F)
36 Mounting bosses and adapters
7 Supplement32036-EN-110223
Mounting bosses and adapters 37
7 Supplement
32036-EN-110223
38 Mounting bosses and adapters
7 Supplement32036-EN-110223
Mounting bosses and adapters 39
7 Supplement
32036-EN-110223
VEGA Grieshaber KG
Am Hohenstein 113
77761 Schiltach
Germany
Phone +49 7836 50-0
Fax +49 7836 50-201
E-mail: [email protected]
www.vega.com
Printing date:
ISO 9001
All statements concerning scope of delivery, application,
practical use and operating conditions of the sensors and
processing systems correspond to the information avail-
able at the time of printing.
© VEGA Grieshaber KG, Schiltach/Germany 2011
Subject to change without prior notice 32036-EN-110223
