Upload
andrew-boyd
View
41
Download
0
Embed Size (px)
DESCRIPTION
STRAIGHT EDGE SURVEY EQUIPMENT MANUAL for use by field surveyors and contractors.
Citation preview
Metric Graduated Wedge
Price: 69.00 (per unit)
Product Code: 26570
Metric graduated measuring wedges marked every 2.5mm available.
Measuring range 12.5mm low to 12.5mm high.
This product can only be used with the 2m straight edge with blocks (26550), 3m straight edge with
blocks (26555) and the folding 3m straight edge with blocks (26560).
http://www.yorksurvey.co.uk/measuring/straight-edge/230/metric-graduated-wedge.html
Folding 3m Straight Edge c/w Blocks
Price: 160.00 (per unit)
Product Code: 26560
Lightweight folding straight edge with a 12.5mm block at each end for use with a metric graduated wedge
(supplied separately).
Folded length: 1m
Extended length: 3m
Strong joints with clamp mechanism
Securing strap to hold in place when folded
When used with the metric graduated wedge you can measure any vertical irregularity within a range of
12.5mm low to 12.5mm high.
http://www.yorksurvey.co.uk/measuring/straight-edge/229/folding-3m-straight-edge-cw-blocks.html
3m Straight Edge
Price: 103.00 (per unit)
Product Code: 26551
Approximately 3 metres in length used to determine lateral surface regularity of a road or floor surface etc.
Plain lightweight straight edge which can be placed on any surface to give a visual indication of level.
Can also be used on floor slabs and other areas where regularity of finish is important.
Size 25 x 76 x 3000mm weight 3.54kg
3m lightweight aluminium straight edge with carrying loops.
This product cannot be used with the metric graduated wedge.
2m Straight Edge with Blocks
Price: 119.00 (per unit)
Product Code: 26550
2 metres in length and used to determine lateral surface regularity of a road or floor surface etc.
Lightweight straight edge equally supported at each end by 12.5mm blocks with an aluminium wedge
(supplied separately) which gives a set height between the surface and the beam.
Using the straight edge with raising blocks you can measure any vertical irregularity using an optional
2.5mm incremented wedge with a range of 12.5mm low to 12.5mm high.
Can also be used on floor slabs and other areas where regularity of finish is important.
Size 25 x 76 x 2000mm
Optional metric graduated measuring wedges marked every 2.5mm available.
Measuring range 12.5mm low to 12.5mm high.