STATE OF ART EQUIPMENTS PURCHASED IN TEQIP-II …€¦ · Equipment Name: Inverted Phase Contrast Microscope with fluorescence Attachment Cost of the Equipment : Rs. 10.43750 (in

STATE OF ART EQUIPMENTS PURCHASED IN TEQIP-II INSTITUTIONS

Equipment Name: ABAQUS Simulia 6.12.3

software

Cost of the Equipment : Rs. 9.99206 (in lakhs )

Department: CIVIL Engineering ( Structural)

Purpose : Used for Finite element modeling and

simulating the behaviour of various

structural elements

*4 PG projects carried out

GOVERNMENT COLLEGE OF TECHNOLOGY, COIMBATORE

Equipment Name: TOC Analyser


Department: Civil Engineering (Public Health lab)

Purpose : To find total organic carbon and total nitrogen

concentration in solid & liquid samples

* Experiments were carried out in the following areas.

1. To find out Nitrogen, Carbon & Organic Carbon with

Sugarcane Baggase Hydrolysate.

2. To analyse total organic & inorganic carbon & total

nitrogen in tannery waste water.

Equipment Name: FTIR Spectrophotometer

Cost of the Equipment : Rs. 14.66054(in lakhs )

Department: Civil Engineering (Public Health lab)

Purpose : To identify unknown compounds

*utilised for PG project and Research work

Experiments are carried out in the following areas.

1. Analysis of Aluminium oxide + Carbon composites.

Sample 1 – Activated carbon + Aluminium acetate.

Sample 2 – Activated carbon + Alumina composite.

2.Molecular analysis of Hydrazinium pyromellitate &

Gadolinium hydrazine pyromellitate compounds.

Equipment Name: Light Weight Deflectometer


Department: CIVIL Engineering ( SOILS)

Purpose : To used for construction quality control, material

investigation for earthworks, road

construction and design of pavements

worldwide

*For consultancy work

- used in the analysis and design of pavement for Sarkar

Samakulam Bus stand near Coimbatore. The revenue

generated so far is Rs. 30,000/-

Equipment Name: Oasys


Department: CIVIL Engineering ( SOILS)

Purpose : - geotechnical engineering software used for

the analysis and

- design of various foundation elements and

soil structures.

* UG/ PG Project, Research and Consultancy work

Equipment Name: Pin on Disc Wear Measuring Machine


Department: Mechanical Engineering

Purpose : To test the wear rate of different materials and

dynamic frictional force between the wear

materials

*ongoing Research work

wear and friction properties of bulk materials and

composites.(faculty)

*PG project

Equipment Name: Magnesium stir casting furnace with

automatic pouring arrangements



Purpose : To produce metal matrix composites

-*PG project and Research work

Equipment Name: vacuum and squeeze casting setup



Purpose : - To eliminate porosity and shrinkages caused

by the gases

*PG project and Research work

Equipment Name: Ansys 14.5 software

Cost of the Equipment : Rs. 9.85000 (in lakhs)


Purpose : To simulate structural, fluid flow, heat

transfer and weld assembly

*PG project and Research work

* Utilised in the current semester laboratory

Equipment Name: CNC Turning Machine



Purpose : Carry out machining operations such as

facing, boring, turning, grooving, knurling

and threading of Mechanical components.

Equipment Name: CNC Vertical Machine



Purpose : Carry out plunge cuts and drilling to precise

sizes and shapes

Equipment Name: PLC and its Application


Department: Electrical and Electronics Engineering

Purpose : - Programs to control machine operation,

automate electromechanically processes

*Projects and Research work

*6 UG projects carried out

Automatic sheet cutting machine –Layboy unit using PLC

Furnace Dual firing control by PLC

Autoset change system for winder machine using PLC

Cane feeding and Mill speed automation in sugar plant

Automation of de inking pulp receiving chest control using

PLC

Automation in Dye preparation using PLC

Equipment Name: Digital Signal Processing lab

solution



Purpose :- Processor for experimentation in power

electronics and drives

*Project and Research work

TMS320F2812 based control of five phase Induction

Motor.

Equipment Name: SCADA based Electrical power



Purpose : - Performance analysis of tr. Line and to

study load management

*to be utilised for Power system lab

Equipment Name: Power System Protection set up



Purpose : - To study various protection scheme of

power system components

*to be utilised for Power system lab

* PG project

Equipment Name: Multipurpose Lab Station



Purpose : - Measuring equipments for electrical and

electronics experimentation.

*One paper submitted to Elsevier Journal

Implementation of SVPWM based modified three

phase five level inverter with single DC source using

FPGA

*Project

Design and Implementation of smart PV tracker fed

PMBLM for Residential applications

Equipment Name: Embedded Development

Trainer Kit-PIC18F & ARM

11 Microcontrollers


Department: Electronics and Communication

Engineering

Purpose :- development board with various on

board I/O interfaces

*to work on embedded & ARM based project

Equipment Name: X-band Microstrip Antenna

Trainer Kit

Cost of the Equipment : Rs.4.96865 (in lakhs)


Engineering

Purpose : - To determine the ccharacteristics and

radiation pattern of Horn Antenna

*utilised for RF lab

*Project

Antenna Design using HFSS Simulator

Equipment Name: Advanced FPGA Development

Board



Engineering

Purpose : - To design Combinational and Sequential

circuit

* utilised for UG/PG labs and PG project

Low power BIST based Test Pattern Generation

Low Power Multiplier Design

*Research work

Reconfigurable FPGA based Memory System

Design of Digital Filter for signal processing

applications

Equipment Name: Cadence Software



Engineering

Purpose :- For designing integrated circuits,

systems on chip (or, SoCs) and

printed circuit boards.

*Utilised for PG project

*Research work

Design of low power arithmetic circuits

Design of Digital Filter for signal processing applications

Equipment Name: Robots and Accessories - E-yantra Lab

setup


Department: Electronics and Communication Engineering

Purpose : carry out Robotics based projects and participate

in contests organised by IITB

Two more projects have been implemented by the UG

Students batches in e-yantra Robotics lab

1. Robots Aided Self Parking System

2. Audio Assisted Robotics Navigator for Visually Impaired

People

Equipment Name: Wireless Sensor Network System


Department: Electronics and Communication Engineering

Purpose :

1. Used test electronic components and sensors

2. Used in the projects of wireless sensors

Equipment Name: Hybrid tank Setup


Department: Electronics and Instrumentation

Engineering

Purpose : To control linear liquid level, flow and

temperature process variables

* utilised for UG labs and project

Equipment Name: Three tank conical system

with necessary Interfaces



Engineering

Purpose : To control non linear liquid level, flow

and process variables


Equipment Name: DCS with PLC and SCADA



Engineering

Purpose : To implement distributed and sequential

control for various process control

system


Equipment Name: LabVIEW software and

hardware



Engineering

Purpose : To test, measure and control real time

applications


Equipment Name: Server, Nodes and High speed

switches, router, Firewall

Cost of the Equipment : Rs. 36.56178(in lakhs)

Department: Computer Science Engineering

Purpose : Campus networking

* utilised for campus wide networking by all the

departments

Equipment Name: Data Centre with SAN Infrastructure for

high performance computing



Purpose : Live lectures, MOOCs, online courses

* utilised for campus wide networking by all the departments

Equipment Name: Mirror server and Network Infrastructure

for remote classroom simulation



Purpose : QEEE live lectures storage, backup server, online

courses

* utilised for campus wide networking by all the departments

Equipment Name: Biohazard safety Cabinet


Department: Industrial Bio Technology

Purpose : To handle animal cell cultures in a Sterile

Environment

* utilised for Genetic Engineering ,Molecular Biology

lab and U

Equipment Name: Gel documentation System



Purpose : To visualize and capture images of DNA,RNA

Protein bands in Agarose and SDS PAGE gels

after electrophoresis under both UV and

White light


lab and UG projects

Equipment Name: Ice maker



Purpose : To prepare Ice flakes for different experiments

which require lower temperature


lab and UG projects

Equipment Name: Atomic absorption spectroscopy



Purpose : To measure the Concentrations of elements.

It is sensitive that it can measure down to

parts per billion in a sample


lab and UG projects

Equipment Name: Inverted Phase Contrast Microscope

with fluorescence Attachment



Purpose : To visualize colorless and transparent specimen

and view live cells. It is essential in handling

animal cell cultures to study cell morphology

•utilised for Genetic Engineering ,Molecular Biology lab

and UG projects

Equipment Name: Impedance Measurement Meter


Department : Physics

Purpose : Measuring electrical characteristics like

impedance, dielectric constant for solid

samples

*One Publication in Elsevier Journal Effect of pH a d a eali g te peratures o structural,

magnetic, electrical, dielectric and adsorption properties of

manganese ferrite nano particles , Material “cie ce i Semiconductor Processing, 27,(2014) 672-681

* Consultancy Revenue generated Rs. 200

Equipment Name: Gaussian Software


Department : Physics

Purpose : software for molecular structural

analysis

*One Publication in Elsevier Journal Vibrational Spectra (FT-IR and FT-Raman), Molecular

structure,

natural bond orbital and TD-DFT analysis of L-Asparagine

Monohydrate by Density functional theory approach

Spectrochemica Acta Part A: Molecular and Biomolecular

Spectroscopy 133(2014) 190-200

Equipment Name: Simultaneous DTA-TGA System ,

Thermal Analysis System Software

and Interface


Department : Chemistry

Purpose : - Phase changes can be identified for polymer,

inorganic materials and refractory materials

* utilised for Research work

Equipment Name: Binary HPLC System with Chromatography

Work Station


Department : Chemistry

Purpose : - used for separation of chemical and biological

compounds that are non-volatile

A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY

KARAIKUDI -4.

ANNA EDUSAT FACILITY

(Rupees in Lakhs : 5.0 )

It is used to enhance teaching learning

facility through web courses offered by

Anna university.

A.C.COLLEGE OF ENGINEERING AND TECHNOLOGY KARAIKUDI -4.

DIGITAL LIBRARY SOFTWARE


It improves Library data base

management, administration and

automation through digital library

software.


E- BOOK COLLECTION


It enhances teaching learning and research

facility through e- books.



CPU 2000 PCB


It is Installed in XRD Machine by

replacing worn-out PCB. The XRD

machine used for the research of material

properties .

DSPACE SOFTWARE

(Rupees in Lakhs : 5.628)

It facilitates the design and testing of

triggering units for power electronic

convector. it is used by UG& PG Students

for Research work and Projects.


Erbium Dopped Fiber Amplifier

(Rupees in Lakhs :6.999 )

To enhance research and project work

for UG& PG students of ECE

department.


Impact Testing Machine


It is used to study the impact strength of

polymer based composed martial with

maximum 25 joule. It most useful for

Research activities and PG project

work .it is proposed to providing

consultancy.


Laser Equipments


Helium Neon laser experimental setup is

very much required for doing projects by

the ME – OC students.


Pin on Disc Tribometer


It is used to characterize the tribological

properties of thin films an composite

materials. The equipment equipped with

special to find wear in eccentric

position of the sample.


POWER ANANYZER

(Rupees in Lakhs :10.29 )

It enhances research facility in power

quality. The power quality analyzer is

used to analyze power parameter like

RMS, average, real and reactive powers,

power harmonics, voltage sag ,swell and

THD.


Pulsed Laser Deposition


This equipment is used to coat thin films

soft and hard coatings. This equipment is

compatible for both D/C magnetron and

R/F sputtering and also used for

TIN,TIC,ITO,CrM coating. It facilitates

research works in coating.


Software Defined Radio


This can be used for both research and

teaching. Researchers can establish a

wireless network coding test bed using

the SDRs and also can use the radios for

spectrum sensing and eventually

developing cognitive radio networks.

Thus can be used for doing project work

and research to perform various signal

processing tasks such as filtering and

noise reduction also.


Triaxial Test Apparatus


Soil mechanics lab can use of this

equipment for practical classes and

project works.



Wireless Sensor Networks


This laboratory on Wireless Sensor Networks

offers students a theoretical and practical

introduction to the concepts of wireless networks,

focusing on sensor network aspects. Practical

knowledge of wireless sensor nodes and

networks, MAC layer protocols and routing

algorithms and programming of sensor network

nodes. The students will first have the

opportunity to familiarize with the sensor

hardware and then with the acquired knowledge

can do individual project using the available

sensor hardware.

Electronic work station


It provides the advanced work bench

facilities for doing regular laboratory

experiment and research work.


It is an basic vibration model testing of

single degree of freedom system. The

master engineering students can easily

understand the experimental method of

dynamic problems, application of free

vibration, mode shapes etc. It can be

included in structural engineering

laboratory classes.

Basic Vibration Test Rig



To enhance awareness of robotics and

Encourage research activities and projects

for UG& PG students.

E-YANTRA LAB



Modern Electric Drives Systems


It enhances the research activities in

solid-state drives and their characteristics

for conventional and special electric

machines for both UG(EEE)& PG (M.E

Power electronic and Drives).


Servo Hydraulic UTM


Computerized UTM was not present

in Civil department earlier. And this

equipment has versatile usage of

testing like impact, cyclic, fatigue,

compression testing and tensile

testing of reinforcement. It is useful

for project work of students and

research work.


Wi-Fi Device


It improves internet facilities in and

around campus for enhancing knowledge

sharing through web .


GOVERNMENT COLLEGE OF ENGINEERING, SALEM

CNC TURNING CENTER

Cost in Lakhs : Rs.16.85619

Department in which purchased: MECHANICAL ENGINEERING

Purpose : i) For UG students lab work

: ii) PG students project work

: iii) Research & Development

: iv) Consultancy work

: v) Internal Revenue Generation

CNC MILLING

MACHINE Cost in Lakhs : Rs.21.57298

Department in which purchased:

MECHANICAL ENGINEERING

Purpose : i) For UG students lab work

: ii) PG students project work

: iii) Research & Development

: iv) Consultancy work

: v) Internal Revenue Generation

Beneficiaries : 200 Nos.

RAPID PROTOTYPING

MACHINE Cost in Lakhs : Rs.39.30000

Department in which purchased:

MECHANICAL ENGINEERING

Purpose : i) For UG students project work

ii) PG students project work

iii) Research & Development

iv) Consultancy work

v) Internal Revenue Generation

Beneficiaries : 300 Nos.

COIMBATORE INSTITUTE OF TECHNOLOGY, COIMBATORE

FIELD EMISSION SCANNING ELECTRON MICROSCOPE

FIELD EMISSION SCANNING ELECTRON MICROSCOPE

Cost : Rs.1,92,00,000/-

(Rupees One Crore and Ninety Two Lakh only)

Department : Mechanical Engineering

Installed at : FESEM Lab

Purpose : Research and Consultancy :

(To Characterize Materials as well as to perform

Elemental Analysis.)

COMPUTER SYSTEMS

COMPUTER SYSTEMS

Cost : Rs.9,92,000/-

(Rupees Nine Lakh and Ninety Two Thousand only)

Department : Institution Level

Installed at : QEEE Centre

Purpose : To Conduct QEEE Live Classes, Live Labs , Pedagogy

Training, Bridge Course, MOOC and E- Learning.

GEAR HOBBING MACHINE

Cost : Rs.9,73,350/-

(Rupees Nine Lakh Seventy Three Thousand

Three Hundred and Fifty only)

Department : Mechanical Engineering

Installed at : Central Workshop

Purpose : Research Works for Ph.D Scholars, PG and UG

Students.

GEAR HOBBING MACHINE

VIDEO CONFERENCING KIT

Cost : Rs.4,84,571/-

(Rupees Four Lakh Eighty Four Thousand

Five Hundred and Seventy One only)

Department : Institution Level

Installed at : QEEE Centre

Purpose : Video Conference for conducting Bridge

Courses and Online Courses .`

VIDEO CONFERENCING KIT

GOVERNMENT COLLEGE OF ENGINEERING, BARGUR

Photo of the Equipment purchased under TEQIP-II

Silver Schmidt – Rs. 2.40750 Lakhs

Installed in Civil Department .

For Testing & Consultancy


Pandit Lab – Rs. 3.30750 Lakh Rupees




Profometer – Rs 3.51 Lakh Rupees




Electronic Weighing Machine 20Kg – 0.28035 Lakh




Motorised Sieve Shaker – 0.86448 Lakh Rupees




Sample Extractor – 1.78620 Lakh




Electronic Weighing Balance – 0.62475Lakh




Direct Sheave Apparatus – Rs 1. 77030 Lakh




Fully Automatic Compressing Tester – 9.99013Lakh




Exhaust Gas Analyzer – 5.66775 Lakh Rupees

Installed in Mechanical Department.

For Students practical knowledge and Research

project

Beneficiaries : Faculties who are doing Ph.D and

students


Smock Meter – Rs. 5.58760 Lakh

Installed in Mechanical Department.

To E issio Test Research work a d stude t’s practical knowledge

Beneficiaries : Faculties who are doing Ph.D and

students

Documents

STATE OF ART EQUIPMENTS PURCHASED IN TEQIP-II …€¦ · Equipment Name: Inverted Phase Contrast Microscope with fluorescence Attachment Cost of the Equipment : Rs. 10.43750 (in