Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Specification handbookAluminium panels with drawers
MS UM 001 Issue 002
Module Carts
CONTINUOUS WORKFLOWModule carts integrate with our healthcare storage range by utilising the Medstor tray and divider system. Medstor module carts offer a choice of:
Designed and manufactured in the UK by Medstor, giving us total system control with product continuity.
2
CONTENTS
Continuous workflow - Technical specifications
Module cart specifications - Components list overview
Component list - Module cart panels
Operational instructions
Clear polycarbonate trays & dividers - ABS trays & dividers
Divider product segregation - Snappable divider
Castor fitting / removal - Handle fitting
Accessory rail - Accessory mount bracket
Work surface extensions - Endoscope holders - Vial holder shelf - Plaster bowl holder
Laptop / notebook holder - Tablet holder - Drain - Tray extension - Universal hook -
CPR board
IV pole 2 hooks - Defib platform - Electrical accessories
Overbridge unit - Cylinder holder - Din accessory rail
Glove box holders - Bougie / airway holder - Caddie waste bin -
Gel / bottle holder - File holder
Sharps bin holder - Apron dispenser - Security options - Security technology
2-3
4-5
6-7
8-9
10-11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
• Height options• Drawer configurations• Door & drawer options• 4 locking systems• Expansive range of accessories• Optional colourways & decals
TECHNICAL SPECIFICATION DETAILS:
CERTIFIED TO CE GENERAL SAFETY STANDARD, 2001/95/EC EN93/42/EEC ANNEX 1- HARMONISED STANDARDS: AS BELOW. HTM71 COMPLIANT. ISO 3394 2012 PACKAGINGMANUFACTURED TO ISO 9001:2015 AND ISO 14001:2004 ENVIRONMENTAL STANDARDS.
PANEL SPECIFICATIONConstruction lightweight aluminium composite. Aluminium ProfilePencil Hardness 2HToughness of Coating 3TTemperature Resistance -50ºC to +80ºCImpact Strength (kg/CM2) 50Boiling Water Resistance Boiling for 2hrs without changeAcid Resistance Surface immersed in 2% HC1 for 24hrs without changeAlkali Resistance Surface immersed in NaHO engine oil for 24hrs without changeOil Resistance Surface immersed in 20# engine oil for 24hrs without changeCleaning Resistance >1000 times without changePeel Strength >5 Newton/mm
MODULAR BUILDISO HTM71 compliantSoft closing telescopic runners: EN 15338+ A1:2010/EN 15338:2007 +A1:2010 Hardware for furniture-Strength and durability of extension elements and their components. 30kgs load. Single wheel castors 125mm EN12530 Polymide tread shore A92, Including 1 x antistatic.Hinges to BSEN1935:2002 (door version)DormaKaba Locks. Unparalleled security control. Heavy duty application BSEN1303
Internal trays and divider system - Manufactured in accordance with ISO 9001:2015 ISO 14001:2004
ABS: Izod impact strength: at 23°C, 4mm ISO180/A kj/m2 26 Charpy impact strength notched at 23°C 4mm, ISO179 Kj/m2 22ABS temperature tolerance -20°C to plus 70°CPolycarbonate temperature tolerance -40°C to plus 120°C
Polycarbonate: Izod Impact Strength notched at 23°C , 4mm ISO180 1A Kj/m2 65Charpy Impact Strength notched at 23°C , 4mm, ISO 179 1eA Kj/m2 60Flexural Strength 2mm/min ISO178 Mpa 91Standards ISO 3394/DIN 55510, 2011/65/EU, 2003/11/EC, 2006/122/EC
High Pressure Laminate drawer fronts: ENISO 1183-1, EN438-2, NFP92 Fire rating M1 classification 20170927: Food safe EN13130-1, Formaldehyde emission EN717-2, VOC emission ISO 16000-9. Antibacterial properties JIS-Z >99.0
Aluminum profile: BS/EN573 Composition of alloy and EN755 Extruded Rod Bar
Viewlite IT arm with laptop holder MM44792060
3
4
MODULE CART SPECIFICATIONSCOMPONENTS LIST OVERVIEW
1
9
7
12
10
12
3
4
2
5
1615
14
68
11
18
17
19
2120
22
13
15
WORKTOPSSeamless, robust and recessed acrylic capped ABS top can be fitted on as standard (max load 45kgs).
5
MODULE CART SPECIFICATIONSCOMPONENTS LIST OVERVIEW
MC6500 (1160mm height) MC6525 (1025mm height) View ref
Cart back panel MC81600000 MC81200000 2
Cart side panel MC81500000 MC81100000 16
Rear upright extrusion MJ46500003/6500 MJ46500003/6525 5
Left hand front upright extrusion MJ46500001/6500 MJ46500001/6525 10
Right hand front upright extrusion MJ46500002/6500 MJ46500002/6525 11
Acrylic coated ABS top MC44815370 MC44815370 1
Aluminium top support MC81400000 MC81400000 3
Front insert panel MC61519/COL MC61519/COL 4
Small drawer front (82mm) MC6151/COL MC6151/COL 9
Medium drawer front (132mm) MC6152/COL MC6152/COL 12
Large drawer front (232mm) MC6153/COL MC6153/COL 15
Drawer handle MC44920001 MC44920001 14
Left hand cradle mounting bracket MH10000290 MH10000290 7
Right hand cradle mounting bracket MH10000291 MH10000291 8
Tray cradle MH10000600 MH10000600 6
Pair of soft close telescopic runners MH10001450 MH10001450 13
Fully welded box section base MC49380012 MC49380012 20
Base panel MC81300000 MC81300000 18
Antistatic swivel castor (yellow dot) MM49382125 MM49382125 21
Swivel castor with brake MM49381125 MM49381125 22
Swivel castor MM49380125 MM49380125 19
Non marking bumper MC35000001 MC35000001 17
MODULE CART SPECIFICATIONSCOMPONENTS LIST
PROFILES Lightweight anodised aluminium profiles 48mm x 22.5mm with a general wall thickness of 1.5mm.
Designed to secure panels from 6mm to 18mm thickness enabling the cart to be configured using lightweight composite aluminium / polymer panels.
BUFFERS The Medstor Module Cart is equipped with four non-marking Polyolefin polymer alloy bumpers clipped and screwed onto the fully welded base structure.
DRAWER SIDES / HYGI CRADLEDrawers are complete with a pair of Accuride steel telescopic runners fitted to formed and coated mild steel tray support cradles, which carry the system baskets / trays.
The telescopic runners hold up to a maximum weight loading of 30kgs. Telescopic runners allow full withdrawal of the basket / trays to enable filling to the rear.
Wheel centre made of Polypropylene, Tread TENTEprene (thermoplastic rubber), grey non-marking, precision ball bearing.
3 x non-static1 x anti-static castor indicated by yellow centre.
BASE FRAMEFully welded mild steel 30mm x 30mm x 1.5mm rectangular box section, electrostatic coating, with fully enclosed protective base panel.
CASTORSAll mobile units are fitted with 125mm Tente castors manufactured to EN 12530. Castors are chosen for roll performance, movement noise, attrition and corrosion resistance.
Swivel and swivel with lock, housing and wheels made from high grade synthetic materials, double ball bearing swivel head, bolt hole.
6
Pencil Hardness 2HToughness of Coating 3TTemperature Resistance -50ºC to +80ºCImpact Strength (kg/CM2) 50Boiling Water Resistance Boiling for 2hrs without changeAcid Resistance Surface immersed in 2% HC1 for 24hrs without changeAlkali Resistance Surface immersed in NaHO engine oil for 24hrs without changeOil Resistance Surface immersed in 20# engine oil for 24hrs without changeSolvent Resistance Cleaned 100 times with Dimethylbenzene without changeCleaning Resistance >1000 times without changePeel Strength >5 Newton/mm
PANEL THICKNESS (MM) 3Sound Absorption 0.05Sound Attenuation 24Water Absorption % by Volume 0.01Thermal Performance R Values 0.0080Core Composition LDPEFire Performance Class 1 BS476 PT7 Class 0 BS476 PT6Tensile Strength of Aluminium Layers 149MPaPANEL THICKNESS (MM) -0 + 0.2Width (mm) ±2Length (mm) ±3Diagonal ±5Thermal Expansion 2.4mm/m @100ºC Temp DifferenceAluminium Thickness As specified in EN485-4
3.8kg/m2 at 3mm
CLEANCONFIGURE CONTROL
5WORKFLOW ACCESSORIESGUARANTEE
MODULE CART PANELSEQUAL RIGIDITY TO 2.4mm ALUMINIUM (6.5kg/m2) OR 1.7mm STEEL (13.3kg/m2)
7
OPERATIONAL INSTRUCTIONSGENERAL SAFETY WARNING INFORMATION
SURROUNDING AREAAlways check your working environment for potential hazards.
HANDLE USEUse the module carts adjustable handle and not the accessories for manoeuvring.
TRANSPORTATION SAFETYDo not open the module cart drawers when in transit.
AREAS OF USEModule carts are not to be use on angled ramps or stairs.
UNLOCK CASTORDo not move or turn the module cart unless the brakes are unlocked.
ACCESSORIESAll accessory fittings must be checked on a regular basis for stability.
WALKING SPEEDMove the module cart with caution at all times.
FIX POSITIONAlways ensure castor brakes are applied once cart is in required position or working area.
ONE DRAWERDo not open more than one drawer at a time.
UNLOCKED
LOCKEDx
x
x
x
x
p
p
p
p
UNLOCKED
x
8
OPERATIONAL INSTRUCTIONSGENERAL SAFETY WARNING INFORMATION
CLEANING INSTRUCTIONSGENERAL SAFETY WARNING INFORMATION
TRANSITDo not use the cart to push open doors or as a support / lean to.
ADVICEAvoid scrapers, hard surfacescrubbing brushes and abrasive cleaning materials.
MAINTENANCERegular cleaning of all components is recommended.
We understand the requirements for changes in infection prevention and control plus the introduction of new cleaning procedures and solutions is dynamic within the healthcare environment. Care is taken to reflect new/ additional procedures and solutions into our technical information and we encourage on going communication with all our stakeholders to ensure our product offers comply with the latest infection prevention and H & S recommendations.
As the original equipment manufacturer, products are designed and manufactured to BS/EN standards in materials proven best fit both functionally and environmentally suitable.
Disinfectants used within current hygiene protocols, at the manufacturers recommended dilutions, are safe for use on all components used within the Medstor Module range: Including and not limited to: ECOLAB ACTICHLOR PLUS, Clinell Sporicidal Wipes, Clinell Universal Sanitising Wipes, 6.0g CHLOR-CLEAN Tablets, 1.8g Effervescent Haz-Tab Tablets, Difficil- S Working Solution.Hydrogen Peroxide vapour and UVC light sanitation is also permissible for use.
LOADINGDo not overload the individual drawers 21kg per drawer.Work surface weight 45kg max.
DRAWERSDo not slam shut drawers.
TESTWhen using a new chemical or cleaning product, always do a test patch.
x
x
p
x
p
9
600 400 50 - - M1605600 400 100 M1601 M1651 M1611600 400 200 M1602 - M1612
600 400 50 M1645 M1665600 400 100 M1641 M1661600 400 200 M1642 M1662
OPEN SIDESAND SOLID BASE
SHORT DIVIDER400 D (mm)
W (mm) D (mm) H (mm)
W (mm) D (mm) H (mm)
SOLID SIDESAND SOLID BASE
OPEN SIDESAND OPEN BASE
LONG DIVIDER600 D (mm)
EURO SIZE 600 x 400Clear polycarbonate makes identifying materials easy, with a user temperature range of -40°C to +120°C machine wash and resistant to standard detergents.
POLYCARBONATE DIVIDERSCORRESPOND TO RELEVANT TRAY HEIGHTS
PRODUCT SEGREGATIONDIVIDER SYSTEM (see pages 12-13 for installation)
• Solid base options protect from fluid leaks• Perforated base options improve air flow• Inbuilt cabinet drawer stops• Seamless hygienic design• Nestable same size containers
• Load bearing capacity 35kg• High impact break resistant• Sanitised at both high and low temperatures• Conform to international module sizes• Full integration between trays and dividers
Dividers can also be scored and snapped and used in conjunction with a system ‘T’ clip to create even smaller configurations. System label holders are available as standard.
CLEAR POLYCARBONATE TRAYS & DIVIDERSTEMPERATURE RANGE -40ºC TO + 120ºC
PART NUMBER: F112
10
600 400 50 - - M0605600 400 100 M0601 M0651 M0611600 400 200 M0602 - M0612
600 400 50 M0645 M0665600 400 100 M0641 M0661600 400 200 M0642 M0662
OPEN SIDESAND SOLID BASE
SHORT DIVIDER400 D (mm)
W (mm) D (mm) H (mm)
W (mm) D (mm) H (mm)
SOLID SIDESAND SOLID BASE
OPEN SIDESAND OPEN BASE
LONG DIVIDER600 D (mm)
EURO SIZE 600 x 400ABS offers a tidy container solution, with a user temperature range of -20°C to +60°C resistant to standard detergents.
MEDSTOR SYSTEMCLEAR POLYCARBONATE & ABS TRAYS CAN SIMPLY BE TRANSFERRED FROM MODULAR CART TO ANY MEDSTOR LINER
ABS DIVIDERSCORRESPOND TO RELEVANT TRAY HEIGHTS
• Anti-static tray dissipates static charge build-up• Solid base options protect against fluid leaks• Perforated base options improve air flow• Inbuilt cabinet drawer stops• Seamless hygienic design• Nestable same size containers
• Load bearing capacity 35kg• Good impact strength• Conform to international module sizes• Full integration between trays and dividers
ABS TRAYS & DIVIDERSTEMPERATURE RANGE -20ºC TO + 60ºC
11
LONG DIVIDERCorresponds to relevant tray heights, please see pages 10-11
SHORT DIVIDERCorresponds to relevant tray heights, please see pages 10-11
DIVIDER PRODUCT SEGREGATIONFULLY ADJUSTABLE DIVIDERS TO CREATE INDIVIDUAL COMPARTMENTS
PART NUMBERSSEE PAGES 10 - 11Divider strips install by sliding end sections into the tray’s inbuilt spacers.
PART NUMBERSSEE PAGES 10 - 11Divider install by sliding end sections into the tray’s inbuilt spacers.
TIPStability:T-clips provide additional strength when connecting smaller sections to long dividers.
REPOSITIONING DIVIDERSInstruction:To release the divider remove any T-clips and pull the divider section upward - Do not force.
REPOSITIONING DIVIDERSInstruction:To release the divider, remove any T-clips and pull the divider section upward - Do not force.
p
12
PART NUMBERSSEE PAGES 10 - 11Divider can be adjusted to segregate smaller sections of the Medstor tray’s.
REQUIRED TOOLSStrong, sharp utility knife with cutting mat surface.
MEASURINGPlace divider above requiredtray section and measure the required cutting point.
SAFETYInstruction:Ensure the cutting surface is leveland placed in a suitable environment.
SCORINGRun the scoring knife over the section until the material is suitablefor snapping.
SNAPPINGWhen snapping the dividers,do not force the sections apart.
POSITIONINGSmaller dividers may require T-clips for stability.
SNAPPABLE DIVIDERPlease ensure dividers are scored correctly and safety measuresare followed to prevent cutting finger, hand or face.Follow your own risk assessment policy.
13
CASTORS x 1ANTI-STATIC TENTE LEVINA 125MM LOCKING
CASTOR FITTING / REMOVALCASTORS ARE FITTED DIRECTLY TOTHE FULLY WELDED BASE PLATE
CASTORS x 1TENTE LEVINA 125MM LOCKING
CASTORS x 2TENTE LEVINA 125MM LOCKING
BUMPER x 4CORNER BUMPER
PART NUMBER: MM49382125 Medstor module cart swivel and locking castor.
ALLEN KEY FIXING Castors are attached to the aluminium profileusing a secure bolt within the castor channel.
Insert Allen key into the castor channel to secure bolt fixing and base plate to upright.
PART NUMBER: MM49380125Medstor module cart swivellocking castor.
PART NUMBER: MM49381125 Medstor module cart swivel castor.
PART NUMBER: MC35000001 Polymer alloy.
CLOSED POSITION - BRAKE OFFInstruction:To release the brake tread brake to the closed position.
OPEN POSITION - BRAKE ONInstruction:To activate the brake tread brake to the open position.
BRAKE OFFBRAKE ON
14
HANDLE FITTINGSTAINLESS STEEL FITTED AS STANDARD
PART NUMBER: MC44792040Short side 452mm handlePART NUMBER: MC44792041Long side 652mm handle
Instruction:Using the Allen key and grub screw, slide the 75mm fixing plate into the T Slot and lock into position. Repeat on the other side. Once the fixing plates are in place, offer the handle to the fixing plates and line up the holes. Secure with the four M5 domed socket head screws.
ADJUSTING HANDLETo change the handle height,unscrew with the Allen key, adjust fixing plate height and re-tighten.
REQUIREDAllen key4 x Round M5 domed screwsFixing plate with M5 screws
SAFETYInstruction:Handle and accessories must only be adjusted when the cart is on a flat even surface and the castors are in the locked position.
UNLOCKEDLOCKED p
15
ACCESSORY RAILRAIL MOUNTED ACCESSORIES ARE SPECIFICALLY DESIGNED FOR HOOKING OVER THE MODULE CART RAIL
PART NUMBER: MC44792034Short side accessory rail
Instruction:Using the Allen key and grub screw, slide the 50mm fixing plate into the T Slot and lock into position. Repeat on the other side. Once the fixing plates are in place, offer the accessory rail to the fixing plates and line up the holes. Secure with the four M5 domed socket head screws.
ADJUSTING RAILTo change the rail height,unscrew with the Allen key, adjust fixing plate height and re-tighten.
REQUIREDAllen key50mm fixing plate4 x Round M5 domed screws
IMPORTANTThe number of accessories specified helps to determine the number of rails required - some accessories use more than 2 rails for stability in transit - please see individual accessory specification for more details.
SAFETYInstruction:Accessories must only be adjusted when the cart is on a flat even surface and the castors are in the locked position.
UNLOCKEDLOCKED p
16
USED WITH PAGE PART NUMBER
Endoscope holder 5 spider 18 MC44792056
Endoscope holder closed carrier 19 MC44792055
Laptop / Notebook holder 20 MC44792060
Tablet holder 20 MC44792080
IV pole 22 MM44792011
Defib platform 22 MC44792070
Overbridge unit 4 bin 23 MC44792050
Overbridge unit 5 bin 23 MC44792049
Overbridge unit 9 bin 23 MC44792048
Overbridge unit with shelf 23 MC44792053
SAFETYInstruction:Accessories must only be adjusted when the cart is on a flat even surface and the castors are in the locked position.
ACCESSORY MOUNT BRACKETUSED ACROSS A WIDE RAGE OF ACCESSORIES
MOUNT BRACKET ACCESSORIES LISTPLEASE SEE RELEVANT PAGE FOR DETAILS
PART NUMBER: M44792032
Instruction:Using the Allen key and grub screw, slide the 75mm fixing plate into the T Slot of the profile you want to mount the accessory, and lock into position.
Once the fixing plate is in place, offer the mount bracket to the fixing plate and line up the holes. Secure with the two M5 domed socket head screws.
17
WORK SURFACE EXTENSION - PUSH THROUGHALWAYS FITTED BY MANUFACTURER
WORK SURFACE EXTENSION - DROP DOWNALWAYS FITTED BY MANUFACTURER
ENDOSCOPE HOLDER5 SPIDER
PART NUMBER: MC44792062Short side fitting
PART NUMBER: MM44793007Short side fitting
PART NUMBER: MC44792056
Instruction:To detach for cleaning, remove the top drawer and remove the five M5 fixings on the underside of the Module Cart Top. Alternatively, remove the top drawer, unscrew the two rubber “stoppers” from the slide out top. This can then be removed.
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set work surface assembly onto accessory rail. To avoid the work surface lifting off the accessory rail, use the two locking bolts on the underside of the support bracket to fasten into position.
Instruction: FIT ACCESSORY MOUNT BRACKET - SEE PAGE 17Position endoscope holder into the mount bracket, passing the tubular upright through the bracket to sit on the fitting. Secure with M8 domed socket head bolt.
REQUIREDAllen key for M8 bolt
REQUIREDAllen key for adjustment & cleaning
REQUIREDAllen key for adjustment & cleaning
18
ENDOSCOPE HOLDERCLOSED CARRIER - ALWAYS FITTED BY MANUFACTURER
PART NUMBER: MC44792055Short side fitting
Cleaning Instructions:As the original equipment manufacturer, products are designed and manufactured to BS standards in materials proven best fit, both functionally and environmentally suitable.
Technical data sheets are available upon request and provide not only routine cleaning and maintenance instructions but also full temperature tolerances, chemical resistance, decontamination instructions and special care requirements where applicable across all materials supplied.
19
VIAL HOLDER SHELFPOLYCARBONATE INSERT
PART NUMBER: MC44792054Drawer fitting
Instruction:Detach shelf by lifting out from tray holder. Please ensure all self contents are removed.
PLASTER BOWL HOLDER6 LITRE STAINLESS STEEL BOWL & HOLDER
PART NUMBER: MC44792009Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set / Position plaster bowl assembly onto accessory rail.
REQUIREDAllen key for adjustment & cleaning
LAPTOP / NOTEBOOK HOLDERSILVER GREY
TABLET HOLDERSILVER GREY
PART NUMBER: MC44792060
PART NUMBER: MC44792080Short side fitting
Instruction: FIT ACCESSORY MOUNT BRACKET - SEE PAGE 17Position laptop / notebook holder assembly into the mount bracket, passing the tubular upright through the bracket to sit on the fitting. Secure with M8 domed socket head bolt.
Instruction: FIT ACCESSORY MOUNT BRACKET - SEE PAGE 17Position tablet holder assembly into the mount bracket, passing the tubular upright through the bracket to sit on the fitting. Secure with M8 domed socket head bolt.
REQUIREDAllen key for M8 bolt
REQUIREDAllen key for M8 bolt
20
DRAINLSU SHELF
PART NUMBER: MC44792012Short side fitting
Instruction:Using the Allen key and grub screw, slide the 75mm fixing plate into the T Slot and lock into position. Repeat on the other side.
Once the fixing plates are in place, offer the drain shelf to the fixing plates and line up the holes. Secure with the four M5 domed socket head screws.
REQUIREDAllen key for adjustment & cleaning
21
TRAY EXTENSIONUSED WITH MEDSTOR 400 x 300 TRAYS
PART NUMBER: MC44792046Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set tray extension assembly onto accessory rail. Always remove tray before adjustment & cleaning for extension accessory.
ABSPOLYCARBONATETRAY
REQUIREDAllen key for adjustment & cleaning
UNIVERSAL HOOKSILVER
CPR BOARD5mm ACRYLIC
PART NUMBER: MM44792010
OPEN SIDES AND SOLID BASE: M13010000 M03010000 SOLID SIDES AND SOLID BASE: M13110000 M03110000
PART NUMBER: MC44792013Short side fitting
Instruction: Slide the universal hook into the T Slot and lock into position.
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Position holder assembly into the mount bracket, passing the tubular upright through the bracket to sit on the fitting. Secure with M8 domed socket head bolt.
REQUIREDAllen key for adjustment & cleaning
22
IV POLE 2 HOOKSSTAINLESS STEEL
ELECTRICAL ACCESSORIESUK & EURO FITTINGS AVAILABLE - ALWAYS FITTED BY MANUFACTURER
DEFIB PLATFORMGREY 5mm ACRYLIC
PART NUMBER: MM44792011Profile bar fitting
PART NUMBER: MC49380044Power distribution unit with quick release cable connector. UK & Euro fitting available
PART NUMBER: MC44792070Profile bar fitting
Instruction: FIT ACCESSORY MOUNT BRACKET - SEE PAGE 17Position IV pole assembly into the mount bracket, passing the tubular upright through the bracket to sit on the fitting. Secure with M8 domed socket head bolt.
Cleaning instructions: Always fitted to the cart on delivery. To detach for cleaning, remove the top drawer and remove the four corresponding M5 fixings on the rear panel.
Instruction: FIT ACCESSORY MOUNT BRACKET - SEE PAGE 17Position defib platform assembly into the mount bracket, passing the tubular upright through the bracket to sit on the fitting. Secure with M8 domed socket head bolt.
REQUIREDAllen key for adjustment & cleaning
REQUIREDAllen key for adjustment & cleaning
23
OVERBRIDGE UNITSILVER GREY
4 BIN: MC447920505 BIN: MC447920499 BIN: MC44792048WITH SHELF: MC44792053Back panel fitting
Instruction: FIT ACCESSORY MOUNT BRACKET INTO BOTH REAR PROFILES - SEE PAGE 17Position overbridge assembly into the mount brackets, passing the tubular uprights through the brackets to sit on the fittings. Secure with M8 domed socket head bolts.
REQUIREDAllen key for adjustment & cleaning
SIZE D & E CYLINDER HOLDERREQUIRES 2 RAILS
DIN ACCESSORY RAILGREY 5mm ACRYLIC
D PART NUMBER: MM44792012E PART NUMBER: MC44792082Complete with rubber strapping.Short side fitting
SHORT SIDE 474mm: MC44792034LONG SIDE 663mm: MC44792029Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
REQUIREDAllen key for adjustment & cleaning
24
GLOVE BOX HOLDERGREY 5mm ACRYLIC
GLOVE HOLDER - TOP LOADINGGREY 5mm ACRYLIC
PART NUMBER: MM44794003Short side fitting
PART NUMBER: MM44794004Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
BOUGIE / AIRWAY HOLDERGREY 5mm ACRYLIC
PART NUMBER: MM44794008Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
25
CADDIE WASTE BIN7 LITRES
PART NUMBER: MM44792017Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
GEL / BOTTLE HOLDERGREY 5mm ACRYLIC
FILE HOLDERGREY 5mm ACRYLIC
PART NUMBER: MM44794005Short side fitting
PART NUMBER: MM44794028Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
26
SHARPS BIN HOLDER - BRACKET ONLYBLACK POLYMER
APRON DISPENSERGREY 5mm ACRYLIC
PART NUMBER: MM44792009Short side fitting
PART NUMBER: MM794009Short side fitting
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
Instruction: FIT ACCESSORY RAIL - SEE PAGE 16Set and position accessory onto accessory rail.
27
SECURITY OPTIONSINDUSTRY LEADING SECURITY
SECURITY TECHNOLOGYINDUSTRY LEADING SECURITY
PART NUMBER: MC44792063Suited claw lock key option -Key opens all drawers.
1025mm HEIGHT: MC447920521160mm HEIGHT: MC44792061Full height tamper evident locking bar.
SECURITY SEAL: MC49380034Pack of 10.
PART NUMBER: MC44792065Proximity fob.
PART NUMBER: MC44792065Code security pad full roller shutter / drawer front lock down.FITTED AS STANDARD ON ROLLER SHUTTER CABINETS
Module Cart security can be fitted with single or master key entry options. Drawers can be configured for individual entry or all drawers locked.
UK HEAD OFFICE & SHOWROOMBayley Street,Stalybridge,Cheshire, SK15 1QQ
REGISTRATION DETAILS:
DEALER INFORMATION:
TEL: +44 (0)161 330 5577EMAIL: [email protected]
www.medstor.co.uk www.medstor.ie
TEL: +353 (0)1 839 3596EMAIL: [email protected]
IRELAND OFFICEUnit 120, Grange HillBaldoyle Industrial Estate,Dublin 13.