SoundMax 3 - ProductReview.com.au

INSTRUCTION MANUAL

Model Number: AWS2-815

SoundMax 3

1300 886 649 Model: AWS2-815 Product Code: 53994 07/2016

www.tempo.org

AUS

ii 1300 886 649 Model: AWS2-815 Product Code: 53994 07/2016

www.tempo.org

AUS

WelcomeCongratulations on choosing to buy a BAUHN® product.

All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come.

iii

SoundMax 3

Warranty Details

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


www.tempo.orgAFTER SALES SUPPORTAUS

iv 1300 886 649 Model: AWS2-815 Product Code: 53994 07/2016

www.tempo.org

AUS

Welcome ii

Warranty Details iii

General Safety Instructions 1

Product Overview 4

Getting Started 6

Instructions 11

Troubleshooting/FAQs 15

Specifications 17

Repair and Refurbished Goods or Parts Notice 18

Contents


www.tempo.org

AUS

General Safety InstructionsRead this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock.

Important Warnings and Cautions!To prevent contact with high voltage components inside, do not attempt to open the cover or the back of the speaker. There are no user-serviceable parts inside this product. Do not repair the unit yourself. Only have it serviced by qualified personnel. Do not expose this product to water, rain or moisture. Do not immerse it water. Do not use it near water or where water splashes or drips. Do not touch the power plug with wet hands.Do not put the product near heat sources or in direct

sunlight as this may cause the battery to explode.

Electrical Safety and Cord Handling• Voltage: Before plugging in the power cord, make sure your outlet voltage and

circuit frequency correspond to the voltage stated on the product rating label and the outlet socket is properly earthed and readily accessible.

• Electrical circuit: Do not overload wall outlets, extension cords, or power boards as this can result in a risk of fire of electric shock.

• Protect the power adaptor: Do not kink, bend, strain or damage the supply cord and protect it from sharp edges and heat. Do not run the cord near heat-producing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires.

• Cord connection: Run the cord in such a way that there will be no risk of anyone pulling it inadvertently, tripping over it or stepping on it. Make sure nothing is placed upon or against the cord.

• Damaged cord: If the supply cord is damaged, contact our after sales support centre. A damaged cord must be replaced by qualified personnel in order to avoid a hazard.

• Disconnect: Unplug the power cord from the wall outlet and disconnect the speaker if it is not going to be used for an extended period of time. When disconnecting, always grip the adaptor, do not pull on the adaptor cord.

• Power Adapter: This device will remain on while connected to a live power socket. To turn off, please unplug the device.

• Danger of explosion: If the battery is incorrectly replaced, there is a danger of an explosion. Only replace the battery with the same or equivalent type.

• Batteries: A battery pack or batteries are installed in this device, Do not exposed this device to radiant heat or naked flames such as direct sunshine or fire.

2 1300 886 649 Model: AWS2-815 Product Code: 53994 07/2016

www.tempo.org

AUS

General Safety Instructions (Cont.)Usage Conditions and Restrictions• Installation and adjustments: The product must be installed in

accordance with local laws. Follow the instructions in this manual when installing and adjusting the product. Only adjust those controls that are covered in this manual, as improper adjustment of other controls may result in damage and/or expose you to danger. We assume no liability for any eventual damages caused by improper use or incorrect handling.

• Avoid installation in the following locations:• Places exposed to direct sunlight or close to heat radiating appliances.• Dusty, humid or moist places.• Places subject to constant vibration.

• Attachments: Only use attachments sold with the product or recommended by the product distributor. Only use the power adapter that is supplied with this unit.

• Usage restriction: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.

• Children: Supervise young children to ensure they do not play with the product. Children may not comprehend the presence of potential risks. Batteries and small parts represent potential choking hazards. Keep batteries out of reach of children. If a battery is swallowed, seek medical help immediately. Keep packaging materials away from children as there is danger of suffocation.

Safe Usage• Placement: Place the product on a straight, rigid and stable surface. Do not

place anything underneath the product.

• Protect from heat and interference: Do not place the product near heat sources such as radiators, stoves or other appliances that produce heat. Keep the unit away from sources of electrical noise such as fluorescent lamps or motors.

• Prevent overheating: Place the product in a sufficiently ventilated place. Allow at least 5cm spacing around the unit to prevent overheating. Do not place the product on top of another appliance that may cause overheating (for example, a receiver or amplifier).


www.tempo.org

AUS

General Safety Instructions (Cont.)• Holes, slots and openings: Do not push any objects into holes, slots or

openings on the unit. This could result in fatal electric shock.

• Handle with care: Press the buttons gently; pressing them too hard can damage the speaker. Do not drop the product or subject it to harsh impacts or excessive vibrations.

• Climatic conditions: Take special care when using this product in tropical/moderate climatic conditions. Do not use it in extremely dry environments as this could lead to static discharge, which can damage the speaker.

• Prevent damage: Do not place the product near other items that may damage it, such as naked flame sources (lit candles) or objects containing water (a vase). Take care that no objects fall and no liquids are spilled into any openings or vents.

• Damage: Do not operate the unit if it is not working normally or has been damaged in any way. Turn the unit off, unplug the power plug and contact our after sales support centre for advice.

Care and Cleaning • Dusting only: Clean the unit only with a soft, dry cloth. Do not use chemical

cleaning agents on any part of the product.

• Do not open: Do not remove the cover or the back of this product. There are no user-serviceable parts inside this product.

• Repair: Do not attempt to repair or service the unit beyond those methods described in this instruction manual. Service methods not covered in the operating instructions should be referred to qualified service personnel.

• Service: Contact the after sales support line and arrange a service by qualified service personnel in the following circumstances:

• The power adaptor has been damaged.• Objects have fallen into or liquid has been spilled into the product.• The unit has been exposed to rain.• The unit has been dropped or damaged.• The unit exhibits a marked change in performance or does not operate

normally.


www.tempo.org

AUS

Product OverviewTop View

Back View

4. Play/Pause

5. Power ON/OFF

6. Indication Light

7. Line-IN

8. Adapter 15V-1.2A

9. USB (USB Charger Function)

10. Reset

1. Wi-Fi

2. Vol-/Previous

3. Vol+/Next

1 2 3 4

7 8 9 10

5 6


www.tempo.org

AUS

Product Overview (Cont.)Buttons and FunctionsWi-Fi: Switch between Wi-Fi mode, Bluetooth mode, Line-In mode and USB charging mode.

Vol-/Previous: Decrease the volume. Double press to go to the previous track in Bluetooth and Wi-Fi mode.

Vol+/Next: Increase the volume. Double Press to go to the next track in Bluetooth and Wi-Fi mode.

Play/Pause: Play/Pause music media. Mute music in Line-In mode.

Power ON/OFF: Power ON/OFF the speakers.

Indication Lights:

Mode Product Status LED Light Indication

Charging adapter connected

Power off Slow Flash Red

Charging input while the speaker power is on

Slow Flash Red (while paired slave speaker, blue light flash quickly and red light off)

Charging complete while the speaker power is off

Solid Red

Charging complete while the speaker power is on

Red light off (Blue light maintain the same status under current mode)

Wi-Fi

Disconnected Flash Blue

Connected Solid Blue

Pairing Quick Flash Blue

Line-InInsert the “line in cable”

Solid Blue

USB Charging output Solid Blue

BluetoothDisconnected Flash Blue

Connected Solid Blue

Line-IN: To play music through an AUX cable.

Adapter 15V-1.2A: To connect the DC adapter.

Reset: To restart the unit.

USB: Charge your Smart Phone or Tablet via the USB port.


www.tempo.org

AUS

Getting StartedTurning ONTo turn this unit ON, press and hold the Power ON/OFF button. When the unit turns on, a welcome voice will be heard and the indicator light will flash Blue.

In order to connect this device to your Wi-Fi, you need to know your network credentials.

ChargingTo power and charge this unit, plug your DC adaptor into a power outlet, plug the other end into the DC Port of the speaker and turn on the power switch.

This unit can also be powered on the go with the built-in rechargeable battery.

NOTE: The Unit will remain on while charging through the adapter.

USB ChargingYou can charge your Smartphone or Tablet through the USB port on the back of this unit. Turn the unit on and press the Wi-Fi button on the top of the unit and select ‘Charging Out’ mode. Your devices will still charge if the unit is turned off and plugged into the mains power outlet via the DC adapter. If the unit is being powered by the built-in battery, the charging function is only available if the unit is turned on and USB charge mode is selected.

NOTE: You will need your device’s USB charging cable. The charging function may not be compatible with some products.

Minimum Requirements This device is compatible with iPhone, iPod Touch and iPad devices running on iOS 6.0 or later and Android 2.3.3 or later. Certain features will require higher versions of the iOS and Android software.

Your Home NetworkTo access music services, Internet radio and any digital music stored on your smart device or Network-Attached Storage (NAS) device, your home network must meet the following requirements:

Home Network RequirementsNOTE: If you want to stream music through built-in App features such as Spotify, you will need to have a high speed internet connection. (Playback experience may differ depends on your internet connection speed.)• If you are going to use the SoundMax controller App on Android or iOS

devices. A Wi-Fi Network will be required for operating the SoundMax Speaker and the SoundMax App

• You need to have your Wi-Fi network SSID and password.

• Your network configuration should not be in isolation mode.


www.tempo.org

AUS

Getting Started (Cont.)Installing the SoundMax AppFor Android Devices • Open the Google Play Store on your Smartphone

or Tablet and search for the SoundMax App .

• Install the App to your Android device.

• When you open the App for the first time, it will search for the available SoundMax units that are connected to the Wi-Fi network.

• The names of the found devices will be displayed under the ‘Device List’ menu.

• In the ‘Device list’ you can change the volume, the stereo mode and the device name. You can also check your SoundMax 3 device information, set a password for its built-in Wi-Fi network and reset the unit back to its original factory settings.

NOTE: This App is subjected to change due to updates without prior notice.


www.tempo.org

AUS

For iOS Devices• Open the App store and search for the

SoundMax App .

• Install the App to your iOS device.

• When you open the App for the first time, it will search for available SoundMax units connected to the home Wi-Fi network.

• The names of the devices found will be displayed under the ‘Device List’ menu.

• In the ‘Device List’ you can change the volume, the stereo mode and the device name from this menu. You can also check your SoundMax 3 device information, set a password for its built-in Wi-Fi network and reset it to the original factory settings. In addition you can set an alarm on your SoundMax unit and set a sleep timer for it to turn off.

NOTE: This App is subjected to change due to updates without prior notice.

Playing Music Your SoundMax unit has the ability to play music wirelessly through the SoundMax App. You can play the music that you have stored on your iOS or Android device, or you can stream music from iHeartRadio or Spotify. Swipe right twice from the Device List screen on the App to access the menu.

Getting Started (Cont.)


www.tempo.org

AUS

• Turn on your SoundMax 3 speaker.

• Install the SoundMax App to your Smartphone or Tablet. (Refer to pages 7 and 8 for instructions.)

• Ensure that your Smartphone is connected to the same network that you are connecting your SoundMax unit to.

• Open the SoundMax App and you will see screen 1, as illustrated on the right.

• Hold the “Wi-Fi” button until the blue LED light flashes rapidly in the Wi-Fi channel. (Screen 2).

• The App will then ask you to input the password of the Wi-Fi network that your Smartphone is connected to. (Screen 3)

• Press next and the App will then start to search for your SoundMax unit and will configure it accordingly, as illustrated in screen 2 on the right.

• If your enter your Wi-Fi network password correctly, you will see screen 4, as illustrated on the right.

Getting Started (Cont.) Connect your SoundMax Device to your Home Network

Screen 1 Screen 2

Screen 3 Screen 4


www.tempo.org

AUS

NOTE: You cannot have two units with same name in the SoundMax app. When you open the app for first time, after setting up a unit a pop up menu will come up and you can select the name from pre-defined names or write desired name for your unit. This will help you to easily differentiate units from each other on different location.

Advanced Network Setup • Turn on your SoundMax 3 speaker.

• Open the Wi-Fi discovery menu on your Smartphone or Tablet and look for the SoundMax 3 Service Set Identifier (SSID).

• Select ‘SoundMax 3’ to connect your device to the SoundMax 3 network.

• Open the web browser on your Smartphone or Tablet and input ‘10.10.10.254’ into the URL bar.

• This will lead you to the SoundMax 3 Wi-Fi setup page.

• Select your network from the list of available networks and input your home Wi-Fi password.

• Your device will disconnect from the SoundMax 3 network and the SoundMax 3 speaker will connect to your home Wi-Fi network.

• Your device will say “Connected” to indicate that your SoundMax 3 speaker has successfully connected to your home Wi-Fi network.

NOTE: When you have two units with the same model number, you need to configure them separately. Simply turn on one of the SoundMax units, connect it to your Wi-Fi network and turn it off. Then follow the same instruction for the second unit.

Getting Started (Cont.)


www.tempo.org

AUS

My Music

Through ‘My Music’ you can access the music that you have saved on your iOS or Android device’s internal storage. Once you enter the ‘My Music’ menu you will see the following options:

• iPhone or Phone

• Home Music Share

• Playlist

• Recently Played

Select the desired option to listen to your music.

iHeartRadioiHeartRadio allows you to stream radio stations to your SoundMax 3 device. Enter the menu and select ‘iHeartRadio’ . Select ‘Genre’ to choose the genre of radio you would like to listen to or select ‘Country’ and then the ‘Region’ to select localised radio stations.

Instructions


www.tempo.org

AUS

Instructions (Cont.)Spotify In order to use Spotify on your SoundMax speakers you need to install Spotify on your connected Smartphone or Tablet. Go to the App Store or the Play Store and search for the Spotify App. Install the App and login into your account. If you do not have an account you will need to set one up.

NOTE: In order to use Spotify on your SoundMax 3 unit, you need to subscribe to a premium Spotify account.

“The Spotify software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses”


www.tempo.org

AUS

AirPlay You can play music through AirPlay on your iOS device. To do this you need to ensure that your iOS device and the SoundMax 3 speakers are connected to the same Wi-Fi network. Swipe up from the bottom of your iOS device and select ‘AirPlay’. Select ‘SoundMax 3’ and start playing your music.

NOTE: On multi-channel mode when you have two or more SoundMax units together, selecting AirPlay will play the selected music on all the speakers. Ensure that you increase the volume on the unit when listening to music on AirPlay.

BluetoothTo use the Bluetooth feature, press the Wi-Fi button once and your unit will go to Bluetooth mode. Search for Bluetooth devices on your Bluetooth enabled device and select ‘SoundMax 3’. Your device will be paired with ‘SoundMax 3’ and you can play music via Bluetooth.

Line-In JackYou can connect your music player to the SoundMax speakers via the 3.5mm stereo analogue audio cable. Connect one end to the Line-In socket on your SoundMax 3 speakers and the other end to the headphone jack on your Smartphone or Tablet to play music.

Factory ResetTo factory reset your SoundMax 3 speakers, open the App on your Smartphone or Tablet and select

Settings . Then select “Speaker Info” and choose “Restore Factory Settings”.

Instructions (Cont.)


www.tempo.org

AUS

Instructions (Cont.)Adding to an Existing SoundMax System You can connect two or more SoundMax speakers together to create a surround sound and multi-room listening experience. In order to do this you need to ensure that all your SoundMax units are connected to the same Wi-Fi network. In the SoundMax App, go to “Device List” and drag one SoundMax device on top of the other (repeat for additional SoundMax speakers), once connected the speakers on the device list illustrate a connection with a joint line.

NOTE: Drag one device towards another until you see the words “Release to multi mode with (device name).”

NOTE: While paired to more than one device in multi-room mode, Bluetooth and AUX modes are not available. To connect using these modes, first unpair the devices connected in multi-room mode.

Create a Stereo PairYou can use two SoundMax units to create a wireless stereo experience. In order to do this you need to connect your SoundMax speakers together following the steps for “Adding to an existing SoundMax”. Then go to the ‘Device List’ menu on the App and change the left speaker to and the right speaker to create the stereo experience.

Firmware updateIf you see a “New” icon next to the setting button, it means a new firmware is available for your unit. In order to apply this firmware tap on “New” and you will see a pop up message. Plug the adapter to you SoundMax unit, turn it on and select upgrade and wait until the device upgrade process finishes.NOTE: Do not conduct any other operation via the phone or the SoundMax unit while the firmware update is in progress.


www.tempo.org

AUS

Troubleshooting / FAQ’s

Symptom Solution

Unable to detect SoundMax Speakers

Check to make sure that the power cord is properly seated.

Network issues may be preventing the product from connecting to your SoundMax system. Try moving the SoundMax components closer to the modem router.

Check your modem router configuration and make sure it is not on isolation mode.

Check the firewall as the firewall software on your modem router may be blocking the ports that SoundMax uses to operate. First, disable all your firewalls and try connecting again. If this solves the problem, you should configure your firewall to work with the SoundMax controller.

Temporarily remove any other components that are connected to your network.

When you make a change to your network configuration, you may need to power cycle the SoundMax unit by unplugging the power cord and then plugging it back in and turn it back on.

Troubleshooting Guide


www.tempo.org

AUS

Troubleshooting / FAQ’s

Symptom Solution

SoundMax Player is not Operating Properly

If the status indicator is not lit and no sound is produced when the unit is plugged in, check to ensure that the power cord is properly seated.

Check to ensure there are no obstacles that will impede wireless operation.

Check your network connections.

The SoundMax player may need to be restarted. Disconnect the power cord for 5 seconds, and then reconnect. Wait for the SoundMax speakers to restart.

Connection Issues

If you have any interference with your Wi-Fi network you should connect your NAS drive that contains your music library to your home network router using an Ethernet cable.

If you forget your SoundMax Wi-Fi password, press “play”, “vol+”, “power”, “play” and “power”. This will reset the wireless password on your SoundMax device.

I Have a New Router

Follow the instructions under the “Connect your SoundMax device to your home network” section.

I want to Change my Wireless Network Password

Follow the instruction under the “Connect your SoundMax device to your home Network” section.

Troubleshooting Guide


www.tempo.org

AUS

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

Specifications Technical Specifications

Amplifier Integrated Class-D Digital Amplifier

Speaker Output 20W

Supported Streaming Services

iHeartRadio, Spotify, Airplay

Wi-Fi 802.11 b/g/n

Bluetooth V4.0

Line-In Input 3.5mm

USB Output 5V DC, 1A (Charging Only)

Battery 11.1VDC, 2200mAh Lithium-ion

Power Supply DC 15V/1.2A

18

SoundMax 3

Repair and RefurbishedGoods or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 886 649 or write to us at:

Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086 Tempo Help Desk: 1300 886 649 (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) Email: [email protected]


www.tempo.orgAFTER SALES SUPPORTAUS


www.tempo.org

AUS

This page has been left blank intentionally.


www.tempo.org

AUS

Warranty returnsShould you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

Product does not work?If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 886 649 before returning it to the store for a refund.

Documents

SoundMax 3 - ProductReview.com.au