SHip Stability Phase ii(fg) mmd exam

Embed Size (px)

DESCRIPTION

mmd phase iiship stability naval architecture paper II questions

Citation preview

Part A1) A vessel of displacement 16000T,KG 6.5m,Km =8m has two identical rectangular deep tanks each 5m long 8m wide and 7m deep.The starboard tank is full of fresh water and port tank is empty.The transverse distance between their COG is 7.5m.Calculate the list produced if 40T of fresh water transferred from the full to empty tank.2) A box shaped vessel 190m25m and even keel draft of 8m,KG = 6.823m has a midship compartment 15m in length divided in port, Centre and starboard compartments. Port and starboard compartment are 6m wide each and Centre 13m wide. Calculate GM of the vessel if only the centre compartment is bilged.3) A Triangular collision bulkhead is 15m broad at the top and 12m deep.The fore peak tank contains ballast of RD 1.015.Calculate the thrust on bulkhead and position of COP below the top of the bulkhead when the sounding in tank is a)12m b)14mPart B4) Describe in detail how you would conduct an inclining experiment. When and why is it Conducted.