Embed Size (px)
Citation preview
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-412 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-412• Duct Size Dimensions: 10.00” x 2.25”• Outside Dimensions: 12.00” x 3.50”• Design Dimensions: 9.62” x 1.78”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
9.62”
12.00”
1.78” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-414 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-414• Duct Size Dimensions: 12.00” x 2.25”• Outside Dimensions: 14.00” x 3.50”• Design Dimensions: 10.95” x 1.78”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
10.95”
14.00”
1.78” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-416 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-416• Duct Size Dimensions: 14.00” x 2.25”• Outside Dimensions: 16.00” x 3.50”• Design Dimensions: 13.43” x 1.77”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.43”
16.00”
1.77” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-610 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-610• Duct Size Dimensions: 8.00” x 4.00”• Outside Dimensions: 10.00” x 5.50”• Design Dimensions: 7.50” x 3.38”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
7.50”
10.00”
3.38” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-612 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-612• Duct Size Dimensions: 10.00” x 4.00”• Outside Dimensions: 12.00” x 5.50”• Design Dimensions: 9.09” x 3.50”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
9.09”
12.00”
3.50” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-614 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-614• Duct Size Dimensions: 12.00” x 4.00”• Outside Dimensions: 14.00” x 5.50”• Design Dimensions: 11.50” x 3.50”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
11.50”
14.00”
3.50” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-616 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-616• Duct Size Dimensions: 14.00” x 4.00”• Outside Dimensions: 16.00” x 5.50”• Design Dimensions: 13.42” x 3.50”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.42”
16.00”
3.50” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-808 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-808• Duct Size Dimensions: 6.00” x 6.00”• Outside Dimensions: 8.00” x 8.00”• Design Dimensions: 5.63” x 5.63”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
5.63”
8.00”
5.63” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-812 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-812• Duct Size Dimensions: 10.00” x 6.00”• Outside Dimensions: 12.00” x 8.00”• Design Dimensions: 9.53” x 5.37”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
9.53”
12.00”
5.37” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-814 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-814• Duct Size Dimensions: 12.00” x 6.00”• Outside Dimensions: 14.00” x 8.00”• Design Dimensions: 11.48” x 5.41”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
11.48”
14.00”
5.41” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-816 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-816• Duct Size Dimensions: 14.00” x 6.00”• Outside Dimensions: 16.00” x 8.00”• Design Dimensions: 13.02” x 5.19”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.02”
16.00”
5.19” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-824 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-824• Duct Size Dimensions: 22.00” x 6.00”• Outside Dimensions: 24.00” x 8.00”• Design Dimensions: 21.56” x 5.59”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
21.56”
24.00”
5.59” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-826 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-826• Duct Size Dimensions: 24.00” x 6.00”• Outside Dimensions: 26.00” x 8.00”• Design Dimensions: 23.30” x 5.50”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
23.30”
26.00”
5.50” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-832 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-832• Duct Size Dimensions: 30.00” x 6.00”• Outside Dimensions: 32.00” x 8.00”• Design Dimensions: 29.00” x 5.41”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
29.00”
32.00”
5.41” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1010 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1010• Duct Size Dimensions: 8.00” x 8.00”• Outside Dimensions: 10.00” x 10.00”• Design Dimensions: 7.54” x 7.54”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
7.54”
10.00”
7.54” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1012 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1012• Duct Size Dimensions: 10.00” x 8.00”• Outside Dimensions: 12.00” x 10.00”• Design Dimensions: 9.49” x 7.57”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
9.49”
12.00”
7.57” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1014 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1014• Duct Size Dimensions: 12.00” x 8.00”• Outside Dimensions: 14.00” x 10.00”• Design Dimensions: 11.36” x 7.56”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
11.36”
14.00”
7.56” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1016 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1016• Duct Size Dimensions: 14.00” x 8.00”• Outside Dimensions: 16.00” x 10.00”• Design Dimensions: 13.34” x 7.54”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.34”
16.00”
7.54” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1122 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1122• Duct Size Dimensions: 20.00” x 9.00”• Outside Dimensions: 22.00” x 11.00”• Design Dimensions: 18.94” x 8.23”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
18.94”
22.00”
8.23” 11.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1212 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1212• Duct Size Dimensions: 10.00” x 10.00”• Outside Dimensions: 12.00” x 12.00”• Design Dimensions: 9.63” x 9.63”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
9.63”
12.00”
9.63” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1214 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1214• Duct Size Dimensions: 12.00” x 10.00”• Outside Dimensions: 14.00” x 12.00”• Design Dimensions: 11.52” x 9.41”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
11.52”
14.00”
9.41” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1216 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1216• Duct Size Dimensions: 14.00” x 10.00”• Outside Dimensions: 16.00” x 12.00”• Design Dimensions: 13.51” x 9.41”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.51”
16.00”
9.41” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1414 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1414• Duct Size Dimensions: 12.00” x 12.00”• Outside Dimensions: 14.50” x 14.50”• Design Dimensions: 11.49” x 11.49”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
11.49”
14.50”
11.49” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1416 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1416• Duct Size Dimensions: 14.00” x 12.00”• Outside Dimensions: 16.50” x 14.50”• Design Dimensions: 13.17” x 11.15”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.17”
16.50”
11.15” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1426 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1426• Duct Size Dimensions: 24.00” x 12.00”• Outside Dimensions: 26.50” x 14.50”• Design Dimensions: 21.79” x 10.87”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
21.79”
26.50”
10.87” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1616 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1616• Duct Size Dimensions: 14.00” x 14.00”• Outside Dimensions: 16.50” x 16.50”• Design Dimensions: 13.31” x 13.31”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
13.31”
16.50”
13.31” 16.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1620 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1620• Duct Size Dimensions: 18.00” x 14.00”• Outside Dimensions: 20.50” x 16.63”• Design Dimensions: 16.92” x 13.21”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
16.92”
20.50”
13.21” 16.63”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1727 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1727• Duct Size Dimensions: 24.00” x 14.00”• Outside Dimensions: 27.00” x 17.00”• Design Dimensions: 23.72” x 13.83”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
23.72”
27.00”
13.83” 17.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-1733 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-1733• Duct Size Dimensions: 30.00” x 14.00”• Outside Dimensions: 33.00” x 17.00”• Design Dimensions: 29.37” x 13.81”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
29.37”
33.00”
13.81” 17.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-2020 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-2020• Duct Size Dimensions: 18.00” x 18.00”• Outside Dimensions: 20.50” x 20.50”• Design Dimensions: 17.31” x 17.31”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
17.31”
20.50”
17.31” 20.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-2032 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-2032• Duct Size Dimensions: 30.00” x 18.00”• Outside Dimensions: 32.50” x 20.50”• Design Dimensions: 28.63” x 17.03”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
28.63”
32.50”
17.03” 20.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-2626 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-2626• Duct Size Dimensions: 24.00” x 24.00”• Outside Dimensions: 26.50” x 26.50”• Design Dimensions: 22.94” x 22.94”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
22.94”
26.45”
22.94” 26.45”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
SC-3232 / Laser-Cut Scroll GrilleSpec Sheet
MODEL: SC-3232• Duct Size Dimensions: 29.63” x 29.63”• Outside Dimensions: 32.00” x 32.00”• Design Dimensions: 28.28” x 28.29”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
28.28”
32.00”
28.29” 32.00”
