Upload
others
View
17
Download
1
Embed Size (px)
Citation preview
ENVIRONMENTAL EFFECTS ON AN INTEGRAL BRIDGE IN SOUTH AFRICA
Sarah Skorpen & Mohamed Parak
• South African National Roads Agency
• Project Engineer - Structures
ACKNOWLEDGEMENTS
• Client: SANRAL
• Consultant: Mott MacDonald
• PHD Research: Ms. Sarah Skorpen, PrEng
University of Pretoria
• Contractor: Aveng Grinaker-LTA
PURPOSE OF THE BRIDGE MONITORING
• Integral bridge behaviour in a South African context.
• Environmental factors on the behaviour of long integral bridge taking the South African climate (hot and dry) into account.
• Earth pressure response behind the abutment over time.
• Compare assumed bridge behaviour (i.e. bridge analysis) to actual measured behaviour and note trends / behaviour patterns.
*
Sensors installed:
110 VW strain gauges
20 rebar strain gauges
41 thermistors
2 Shape Accel Arrays (22 links each)
8 tilt meters
20 earth pressure cells
10 temperature and humidity sensors
11 concrete reference samples
Over 550 channels logging every 15 minutes since the
first pour in Sept 2015
.
VAN ZYLSPRUIT BRIDGE MONITORING
• Heat of Hydration
• Change in effective bridge temperature
• Vertical temperature gradients
• Transverse temperature variation
TEMPERATURE
Eff Bridge Temp:
(Emerson 1976)
Max: 35.33°C
Min: 3.24°C
Daily Range Ave: 4.9°C
Daily Range Max: 8.1°C
EFFECTIVE BRIDGE TEMPERATURE
Type of construction Range of effective bridge temperature (°C)
1 day 3 days 7 days 1 month 6 months
Concrete (Emerson) 7 12 14 17 32
Van Zylspruit deck 8.1 12.4 15.7 17.4 29.5
Van Zylspruit beam 6.2 10.4 11.3 15.1 27.8
Van Zylspruit flanges 12.9 17.5 18.1 22.5 32.5
Table 1. Highest recorded range (i.e. change) of effective bridge temperatures (Emerson ,1976)
EFFECTIVE BRIDGE TEMPERATURE
Earth pressure distribution – Frame Abutment
k*= (d/0.05H)0.4 Kp
d= displacement of the top of the abutment
EARTH PRESSURE – BA 42/96
Earth pressure distribution – Embedment wall abutment
k*= (d/0.05H)0.4 Kp
d= displacement of the top of the abutment
EARTH PRESSURE – BA 42/96
• Heat of hydration can’t be ignored
• Thermal movement is significantly size dependent
• Large beam dampens the thermal effects
• Earth Pressures larger than soil at rest
• Ratcheting effect observed
• Calculation of k* needs to be clarified
SUMMARY BASED ON TRENDS OBSERVED IN DATA THUS FAR
What is the effective bridge deck temperature?
Can we use Emerson’s effective bridge temperature calculations?
Response of flanges vs beams to strain?
What earth pressures must we design for?
What would the most effective deck cross section be?
Effective temperature
Shrinkage
Force on abutment
SOME OF THE DESIGN QUESTIONS TO BE ANSWERED