Hydraulic Scissor Lift

Extended Height – 32’

38’ Rad Center with Matsing 12.6 Antenna

Dual Hydraulically Actuated Lifting Cylinders

Velocity Fuses for Rapid Fluid Loss Control

5-Stage Scissor Assembly with Guying Eyelets

Multi-Port Coax Bulkhead Per Design

Powder Coated for Corrosion Resistance

Stainless Steel Hardware for Corrosion Protection

Hydraulic Reservoir and Control System

Hydro-Safe®, Bio-degradable Vegetable Based Hydraulic Fluid

Includes Rotating Mounting Frame for Matsing® 12.6 Antenna

Pneumatic Masts:

45’ 800-lb. Payload Capacity

60’ 530-lb. Payload Capacity

59’ 1,200-lb. Payload Capacity

Guy Kit & Protective Weather Cover Included

Generators:

10 kW 1-Phase, 3-Wire, 120/240 Volt

20 kW 1-Phase, 3-Wire, 120/240 Volt

36 kW 1-Phase, 3 Wire, 120/240 Volt

Block Heater and Battery Charger Included

Optional Automatic Transfer Switch

UL® Listed Equipment Cabinet:

As Needed For Project Requirements

Options/Add-ons:

3-Sector Antenna Mounting System

Mast Mounting Frame for 12.6 Antenna

Mid-Level Microwave Mount

Pan & Tilt Microwave Mount with Controller

26,000-lb. GVWR

35,000-lb Pintle Hitch with 7,000-lb. Tongue Load (Vertically Adjustable)

25,000-lb. Tongue Jack, Conspicuity Markings

7,000-lb. Leveling Jacks (4), Adjustable Safety Chains

Universal Mounting, Non-Skid Hot Dipped Galvanized Steel Grating Deck

Hot Dipped Galvanized Safety Railing Around Perimeter of Trailer

Hot Dipped Galvanized, Multiple Position Outriggers

Traversing Axle Carriage (To Balance load Distribution)

235/80R16 - Load Range H Tires, Spare Tire Included

Electric Brakes, (Both Axles) With Emergency Break-Away

91” or 101” OSHA Compliant Crows Nest Mast Support Structure

DOT Compliant LED Lighting and Conspicuity Markings

Storage Boxes — Saddlebag (2), Crows Nest (1)

Retractable Rear Approach Steps

12/18

22’ Trailer (DOT Compliant)

SAMPLE

CONFIGURATION