Upload
vincent-summers
View
217
Download
3
Tags:
Embed Size (px)
Citation preview
Q3
X
■ Solves challenging contrast part-detection applications
■ Fast as 250 µs response speed able to capture up to 2,000 events per seconds
■ Angled three-digit display offers real time feedback
Versatile, Rugged, Laser Contrast Sensor
Q3X Applications
■ Registration mark detection
■ Leading edge detection
■ High speed part detection
■ Small/thin features
■ Small contrast changes
Q3X Key Features
■ Solves challenging contrast part-detection applications
■ Fast as 250 µs response speed
– Captures up to 2,000 events per second
■ Angled three-digit display
– Easily viewed from multiple vantage points
– Provides clear user feedback for easy setup
■ Bright output indicator
■ Intuitive setup utilizing two tactile buttons
■ Rugged nickel-plated zinc, laser-marked housing
■ Robust ambient light resistance
Features: User-Friendly Designwith 3-Digit Display
■ Bright output indicator provides high visibility of sensor operation
■ Angled LED Display
– 3 digit, 7-segment display
– Provides clear user feedback for easy setup
– Easily viewed from multiple vantage points
Features: User-Friendly Designwith 3-Digit Display
■ Real time display for easy setup and troubleshooting
■ LED Indicators
– STB = Stability Indicator
– Active TEACH Indicators
0 to 990 Range− Equivalent to 0-9.9
excess gain
Switches at 100
999 indicates saturation
Relative value
Normalized Signal Strength (NSS)
% Light Received
Current ThresholdNSS =
−Press and release (-), then press and hold (-)
to decrease gain
Press (-) to navigate the sensor menu
+Press and release (+), then press and hold (+)
to increase gain
Navigate the sensor menu: press (+)
MODE
Enter Setup mode: press and hold (MODE) for 2+ seconds to enter setup mode
Press and hold (MODE) to decrease numeric values
TEACH
Press and hold (TEACH) for 2+ seconds to start currently selected teach mode
press and hold (TEACH) to increase numeric values
( - )(MODE) and (+)(TEACH)
Press (-)(MODE) and (+)(TEACH) simultaneously to select items in setup mode
Press (-)(MODE) and (+)(TEACH) simultaneously for 2+ seconds to select and save a parameter and return to run mode
Features:Intuitive Set Up Via Push Buttons
Features: Construction
Durable and Robust Construction
■ Withstands:
– Mechanical impact
– Over tightening
– Extreme vibration
Die Cast Zinc Housing
■ With:
– IP67, IP68, IP69K rating
– Chemically-resistant materials
– Laser marked information
Features: Class 2 Laser Emitter
■ Visible beam for easy setup and alignment
■ Class 2 laser, 655 nm
■ Small Spot size
– 2.24 x 0.79 mm at 30 mm
– 1.52 x .055 mm at 150 mm
– 0.55 x 0.27 mm at 300 mm
Features: Inputs and Outputs
■ 10-30 V dc
■ Bipolar (PNP & NPN) output
■ Remote input (disabled by default)
– Remote teach
– Laser inhibit
– Master/slave synchronization
Five Never Fail Teach Modes
Teach Modes
■ Five teach modes available
– Two-point teach (default)
– Dynamic teach
– Window set
– Light set
– Dark set
Never Fail a Teach
■ Sensor will never fail a teach mode
– Always sets a switch point
– Example: In two-point teach mode, if both conditions are at the same signal level, the threshold will be set slightly below the two taught conditions
– See manual for specific behaviors
Never Fail Teach Modes
■ Two Point Teach
– The sensor centers the switch point between two taught conditions.
■ Dynamic Teach
– Dynamic TEACH sets a single switching threshold during machine run conditions. at the optimum level.
■ Window Set
– Window set sets a sensing window using the window offset percentage
■ Light Set
– Light set sets a switching threshold a user-selectable percent offset below the presented condition.
■ Dark Set
– Dark set sets a switching threshold a user-selectable percent offset above the presented condition.
Q3XTBLD-Q8 Specifications
Sensing Beam Visible red Class 2 laser, 655 nm Response Speeds 250 µs, 1 ms, 5 ms
Supply Voltage 10 to 30 V dc IP Rating IP67, IP68, IP69K
Sensing Range 300 mm (11.81 in) OperatingConditions
-10° C to 55° C35-95% Relative Humidity
Output Bipolar (1 PNP & 1 NPN) output Repeatability 60 µs
Beam Spot Size 2.24 x 0.79 mm @ 30 mm1.52 x 0.55 mm @ 150 mm0.55 x 0.27 mm @ 300 mm
Construction Housing – Nickel-plated zinc die-cast, side cover –nickel-plated aluminum, Lens Cover – PMMA, Window – Polysulfone, Buttons – 316 stainless steel
Certifications
Menu Map
Sensor Menu – Top Menu Output Operation
Teach Selection
Offset Percent
Response Speed
Delay Timer
Input Wire Function
Sensitivity
Display Read
Exit Setup
Reset to Factory Default
Q3X Models
Available Now: Q3XTBLD-Q8
Accessories: Brackets
SMBQ4X… NEW
SMB18FA…
SMB18A,$4
Model Material Bolt ThreadList
Price
SMBQ4XFA
Stainless Steel & Die Cast
3/8 – 16 X 2 in $20
SMBQ4XFAM10 M10 X 1.5 X 50 mm $20
SMBQ4XFAM12No Bolt – for use with 12 mm rod
$18
Model Material Bolt ThreadList
Price
SMB18FA
Stainless Steel & Die cast
3/8 – 16 X 2 in $11
SMB18FAM10 M10 X 1.5 X 50 mm $11
SMB18FA12No Bolt – for use with 12 mm rod
$9
Universal bracket for Banner’s Q4X, QS18, & QS30 sensors
Accessories: Cordsets
Standard CordsetsLength Model - Straight Model - Right Angle
0.5 m (1.5 ft) MQDC1-501.5 MQDC1-501.5RA
1.83 m (6 ft) MQDC1-506 MQDC1-506RA
4.57 m (15 ft) MQDC1-515 MQDC1-515RA
9.14 m (30 ft) MQDC1-530 MQDC1-530RA
Washdown IP69K Cordsets – NEWStainless Steel Coupling Nut
Length Model
1.83 m (6 ft) MQDC-WDSS-0506
4.57 m (15 ft) MQDC-WDSS-0515
9.14 m (30 ft) MQDC-WDSS-0530
Q3X Resources: Sell Sheet & Technical Literature
Quick Start Guide(pn 181486)
■ 8 pages
■ Basic set up and menu map diagrams
■ Included in box with product
Sell Sheet (pn 183523)■ 4 pages
■ Selling advantages, applications, and models
■ Electronic and print versions
Manual (pn 181485)■ 28 pages
■ Complete information on programming, performance,troubleshooting, dimensions and accessories
■ Online only
Sales Resources:Videos & Application Notes
Videos
■ Product video
■ Lid detection
■ Demo video
https://www.youtube.com/playlist?list=PL7ma8-bsdD0duUQjP9SHqz-yDRoTLun2X
Application Notes
■ High speed detection
■ Registration mark detection
Q3X Summary
Key Points to Remember
■ Versatile, Rugged, Sensor
– 25-300 mm range
– Contrast sensor
– Robust, metal housing
– Superior ambient light resistance
– Angled 3-digit LCD Display
– Easy to view output indicator
– Intuitive setup via push buttons
Questions