Havis-Shields Equipment Corp.Havis-Shields Equipment Corp.

CONSOLESAngled Series Consoles (AS Series) C3 - C12

Angled Series Console Housings C4 - C5Angled Series Crown Vic Packages C6Angled Series Impala Packages C7Angled Series Intrepid Packages C8

Angled Series (AS Specific) Options & Accessories C9-12Combo Boxes (Combination Armrest/Storage/Power Outlets)C9Cup Holders C10Monitor & Keyboard Mounts C11-C12Wire Cover Panels C11-C12

Enclosed Consoles (C Series) C13 - C19C-800 - C-3011 Enclosed Consoles C14 - C17C-Series Full Size Light & Medium Truck Consoles C17C-Series Consoles W/Trak-Mount Extension C18 - C19

Vehicle Specific Consoles (VS Series) C20 - C23Ford Crown Vic, Dodge Durango C21Dodge Durango (continued), Ford Explorer C21Ford F-150, Ford Expedition, and GM (Silverado, Yukon, Tahoe, Suburban)C23

Equipment Brackets & Filler Plates C24 - C33

AS, C & VS Series Console Options & Accessories C34 - C44Armrests, cup holders. lighter outlets, map lights C34 - C38Accessory Pockets and Mic Clips C39Switch Boxes C42 - C43Storage Boxes C43 - C44

Console Mounting Kits & Brackets C55 - C59

COMPUTER MOUNTSTrak-Mount Mounting Bases (TM Series) C45 - C54

12” - 32” TM-Series Bases C46 - C47TM-Series Vehicle Specific Kits C48

TM-Series Accessories & Universal Computer Mounts C49 - C54Console Mounting Kits & Brackets C55 - C59Gas Shock Computer Mounts (GS Series) C60Telescoping Computer Bases (TCB Series) C61 - C84

TCB-Series Bases C62 - C67TCB-Series Laptop Mounts, Tilt & Swivel Brackets C68 - C70

Computer Specific Mounting Systems C71 - C84Motorola, Panasonic C71 - C77Data 911 C78Printer, Modem,Scanner (Peripherals) & Mounts C80Computer Mounting Accessories C81 - C84Air Bag Switches C84

RADIO TRAYSTrunk Mounted Radio Trays C85 - C87Consolidator Replacement Parts & Accessories C88Motorcycle Communication Boxes C89

Table of Contents

Glossary of Consolidator® Terms

• Bail Bracket – “U” shaped bracket (Trunion)• Equipment Bracket – Mounts control head into console• External Mount – Mounts to outside of console• Extrusion – Heavy duty rail with special slots• Filler Plate – Blank panel fills empty space in console• Hat Bracket – Hat shaped adaptor bracket• Hump Bracket – Floor mount bracket• Internal Mount – Mounts inside console• MTF – Mount to floor• N/A – Not available• Swivel – Turns or adjust side to side• Tilt – Adjusts angle

How to build your mobile office

Determine what equipment you have.

• Make & model• Computer• Radio• Siren• Etc.

Consolidator® Order Form

Vehicle Application Guide

Does Havis-Shields offer a mount kit for a 2004 Ford Escape?

Vehicle Application Guide Question

Does Havis-Shields offer a mount kit for a 2004 Ford Escape?

Vehicle Application Guide Question

Stout Mount Console

Stout Mount Console

Stout Mount Console

Stout Mount Console

Stout Mount Options

Stout Mount Options

Stout Mount Options

Angled Consoles

C-CB-1-3610-ARMCombination box with removable hinged armrest, printer mount, and (3) three lighter plug outlets

• 6” wide x 9” deep• Lighter outlets include 15 amp in-line fuse

and wire harness• 16 gauge formed steel housing with

extruded aluminum top frame• Designed to mount behind AS console to

Trak-Mount base or any flat surface• No vehicle mounting kit required• Recommended for Trak-Mount mounting

See HS-Supplement

TOOLS REQUIRED:Standard and Metric socket set with 6”extension.Standard and Metric wrench set#20 and #15 Torx driver

Trak MountedHARDWARE:

• 8 GSM 33001 Hex head cap screw ¼-20 x ¾”• 8 GSM 31005 Flat washer ¼”• 6 GSM 31026 Lock Washer ¼”• 8 GSM 30005 Hex nut ¼-20

 INSTALLATION:1. Remove front seat mounting bolts near transmission hump. Loosen outboard bolts.2. Place Hex head cap screws ¼ - 20 x ¾” into under side tracks of trak mount and 3. Position trak mount in desired location before tightening down hump mount.4. Mount rear hump brackets to under side of trak.5. Place trak with positioned hump mount brackets over transmission hump and onto

front and rear seat mount studs. Place seat bracket on top of hump mount brackets and replace seat mount bolts.

6. Slide console up to dash and secure to trak mount with 1/4” hardware.7. Unit is ready to accept equipment heads.

Hump Bracket MountedHARDWARE:

• 4 GSM 32009 Carriage bolt 5/16-18 x ¾” • 4 GSM 31320 Retaining nylon washer • 4 GSM 31006 Flat Washer 5/16”• 4 GSM 30017 Nylock nut 5/16-18

 INSTALLATION:1. Remove front seat mounting bolts near transmission hump2. Place Carriage bolts into slots from underneath to top of hump mount bracket

and place nylon retaining washer on bolt on top side to hold in place.3. Place hump mount bracket over transmission hump and onto seat mount studs,

place seat bracket on top of hump mount bracket and replace seat mount bolts. 4. Place console on hump bracket and secure with 5/16” flat washer and nylock nut.5. Unit is ready to accept Equipment heads   NOTE: Models C-AS-1025 & 1060 must be mounted on trak-mount in the Impala.    

Angled Series Consoles Installation InstructionsModels C-AS-1060, 1025, 1325, 1525 & 1725

2/3 4

5 6

2/3 4

What is the #1 selling feature of an Angled SeriesConsole?

Angled Series Question

Enclosed Consoles

C Series (Enclosed) Consoles

• Many sizes available• Original extrusion design• Wide variety of accessories• Very adaptable• Attractive & effective

What is the unique design feature of the C-Series console?

C Series Question

C/TM Series

Assembly and installation instructions

for C Series and C/TM Series console

Step 1. Remove the front seat-mount bolts closest to the transmission hump. Place the hump-mount bracket over the hump and align the holes.

Place the factory seat bracket over top of the newly added hump-mount bracket base. Replace all seat-mount hardware and tighten.

WE RECOMMEND attaching the bail bracket or Trak-Mount base to the hump-mount bracket prior to hump installation.

Step 2. Bolt the bail bracket to the hump-mount bracket using 1/4” hardware supplied. Adjust to center of seats and tighten.

Step 3. Bolt rear L bracket to rear of console with 1/4” x 3/4” screws and serrated nuts. (Do not tighten). Slide console in between bail brackets. With four (4) 1/4” x 1/2” screws and flat/ split washers, bolt console to bail bracket using 1/4” nuts already in lower track. Adjust console into desired position and tighten all screws. Using 1/4” x 3/4” self-tapping screws, fasten rear L bracket to transmission hump. IMPORTANT! USE ONLY FACTORY SUPPLIED HARDWARE.

Step 4. After selecting correct filler plates and equipment mounting brackets, bolt equipment heads to brackets.

A. Spacers may be needed for some heads to achieve 8-5/8” equipment bracket flange width. (See equipment bracket illustration at bottom).

B. Most bracket sets have pre-determined equipment head mounting holes. Installer can drill new holes if a different location is desired.

Step 5. Complete all wiring making sure enough wire is used so components can be removed from console for servicing.

Step 6. Insert equipment heads with equipment brackets into console. Use # 8 x 3/8” T-2 Torx screws.

Step 7. Secure mount screws and all hardware.

This model requires drilling holes in floor. It is designed so that it will not interfere with air ducts, wire harnesses, hoses, etc. However, we recommend that you CHECK UNDER CARPET AND FLOOR for proper clearance before drilling holes.

C/TM Series (Enclosed with Trak-Mount) Consoles

• Provides safest laptop computer mounting• Combines enclosed and Trak designs• Excellent adjustability• Heavy duty extrusion

What is the most important feature of the C/TM Series?

C-TM Question

Vehicle Specific Consoles

C-VS-1600-EXPL

Vehicle Specific Consoles

C-VS-2400-CHGR

Vehicle Specific Consoles

C-VS-1000-TAH

Vehicle Specific Consoles

C-VS-1000-IMP-1

Vehicle Specific Consoles

C-VS-700-EXPL

C-VS-1200-EXPL

C-VS-1100-F150

C-VS-1200-EXPD

Vehicle Specific Consoles

C-VS-1200-GM

C-VS-1200-DUR

C-VS-3011-DUR

VS Series (Vehicle Specific) Consoles

• Custom fit• Accepts standard accessories• Limited space• Very popular

How many VS consoles does Havis-Shields offer?

Vehicle Specific Question

C-Series Equipment Brackets

Limited availability for one-piece brackets – see part numbers that end with –1P

Accessories

C-CH-2-XL

C-ARM-3

C-AP

C-ML-MCB

Equipment Brackets & Accessories

• Large variety• One or two piece equipment brackets• EB – Bend your own brackets available• High quality switching• Time tested parts

The C-AP will fit into how many C-AS Series consoles?A. Two B. Four C. Five

Accessories Question

Trak-Mount

Assembly & installation instructionsfor Trak-Mount (TM Series) mounting base

Material list1 Trak-Mount extrusion-10, 12, 15,

18, or 24-inch standard length1 Hump-Mount bracket

Step 1. Remove the front seat-mount bolts closest to the transmission hump. Place the hump-mount bracket over the hump and align the holes

Step 2. Make sure Trak-Mount is bolted in desired position before bolting down hump-mount bracket.

Step 3. Place 1/4” x 1/2” hex head cap screws into the bottom outer tracks and lightly fasten down the equipment mounting brackets.

Step 4. Bolt equipment heads to brackets. Complete all wiring. Use enough wire so components can be removed from console.

Step 5. Insert equipment heads with #8 x 3/8” T-2 Torx screws. Secure seat-mount bolts and all hardware.

Hardware list for hump-mount bracket4 Hex head cap screws 1/4” x 3/4” GSM33001

4 Hex nuts 1/4” GSM30005

4 Flat washers 1/4” GSM31005

4 Lock washers 1/4” GSM31026

1

2

3

4

5

6

TM Series (Trak-Mount)

• Sturdy• Economical• Lots of Adjustment• Limited Accessories• New floor Traks available for:

– 2004 Explorer– 2004 Expedition– 2000-2004 Tahoe, Suburban, Yukon, Yukon XL,

Silverado, and Sierra pick-ups– 2004 Durango

How many armrests can be mounted directly to a Trak-Mount?

What are the part numbers?

Trak Mount Question

TCB (Telescoping Computer Base)

TCB (Telescoping Computer Base)

Many TCB Series mounts utilizefactory seat bolts for easy installation

Computer Mounting PlatformsInclude fully adjustable mounting bracketsmaking monitors easily viewable fordriver or passenger via tilt swivel features.

Available for Motorola, Litton, DATA 911,Panasonic and many other computerwork stations. (Pages C68 - C79)

Locking Knob to set telescoping height

Articulating Swivel ArmsMaking it easy to positiona computer where you want it.Made from 1/4” steel to providestability.

Angled Series & Enclosed Consolesare compatible with TCB Series to completeyour mounting solution. (see pages C4 - C23)

Gas Shock MountsAlso Available(see previous page)

TCB (Telescoping Computer Base)

Step 1. Loosen front and rear passenger seat bolts.

Step 2. Slide base of the pole support assembly under the front inboard (closest to the transmission hump) seat base. Slide the side brace arm under the front outboard (closest to the door) seat base.

Step 3. Attach side and forward brace arms to pole support assembly with 5/16” x 1” screw. (Do not tighten yet). Align the holes of the seat base, the pole support assembly, side brace arm, and floor holes. Firmly tighten all four seat bolts without over tightening.

Step 5. Using two 1/4” x 3/4” self tapping screws, drill holes and attach lateral (forward) brace arm to vehicle floor or transmission hump.

Step 6. Tighten the hex head screw that attaches the brace arms to the telescoping post when finished.

C-TCB-1 mounting bracket For 1992-1997 Chevrolet Caprice, 1997– 2000 Chevrolet Lumina, 1995– 2001 Ford Crown Victoria

Height closed: 10”Height fully extended: 16”

Material list

1 Pole support assembly CM93071-11 Telescoping pole assembly CM93072-11 Side brace arm assembly CM93114-11 Lateral (forward) brace arm assembly CM93135-1

Hardware list

2 Flat washers 5/16” GSM31006 1 Hex head cap screw 5/16” x 1” GSM33012 1 Nylock nut 5/16” GSM300172 Self-tapping screws 1/4” x 3/4” GSM33060-1

Assembly & Installation instructions

TCB Series (Telescoping Computer Base)

• Many vehicle specific models• Solves difficult mounting problems• Very adjustable• Can be used with all console models• Welded steel construction• Must attach computer mount

– Pages C68 - C70

What model TCB would you suggest for a C-3010 console?

TCB Question

Gas Shock Mounts

Gas Shock Mounts

• Mounts to Trak only• Lift assist• Spring pin locking• For special

applications

Computer Mounting Systems

Computer Mounting Systems

Computer Mounting Systems

• Universal laptop mounts• Primarily Motorola specific• Safe solutions• Unique items• Some docking stations available

What is the maximum width laptop that can be used with a C-3090?

Computer Mounting Question

Trunk Trays

C-3190 Crown Victoria C-3190P Crown Victoria

C-3311 Impala C-3190 with C-3530-5L

Trunk Tray Installation InstructionsModel C-3190 for 1996 – 2003 Crown Victoria

Step 1. Align forward radio shelf bracket with existing holes in front of trunk wall. Use 2 (two) 1/4” x 1” hex head cap screws, 2 (two) 1/4” flat washers and 2 (two) 1/4” flange nuts. Don’t fully tighten bracket yet.

Step 2. Use a block of wood or a shim to level radio shelf. Drill 1/4” hole into trunk hinge, support base on driver’s side. Fasten down shelf using 1 (one) 1/4” x 1” hex head cap screw, 1 (one) 1/4” flat washer, and 1 (one) 1/4” flange nut.

Step 3. Insert 2 (two) 1/4” x 1” hex head cap screws in shelf holes. Place bottom support bracket over hex head cap screws, then place hanger support bracket on top of bottom bracket. Place 2 (two) 1/4" flat washers and 2 (two) 1/4" flange nuts. 1998 Crown Vic: use pair of holes toward front of vehicle. For 1997 Crown Vic: use holes toward rear of vehicle.

Step 4. Using the support as a template, mark and drill two holes in upper deck. Bolt support bracket onwith 1/4” x 1” hex head cap screws, 2 (two) 1/4” flat washers, and 1/4” flange nuts. Make sure shelf is level and tighten all hardware.

Tools needed: 7/16” wrench and socket, drill and 1/4” bit, level.

Hardware Included: 8 (eight) 1/4” x 1” screws, 8 (eight) 1/4” flange nuts, 8 (eight) 1/4” flat washers. Note: Do not substitute hardware. Do not use self-tapping screws as they will vibrate loose. 

Models C-3311 & C-3311-18 for 2001 – 2003 Chevrolet ImpalaStep 1. Put complete tray assembly into trunk with 17-

1/2”aluminum leg brackets towards front of vehicle.Mounting holes on top of front leg brackets will line up with body cross member in front of trunk.

Note: Prop up rear end of tray.

Step 2. Prior to fastening front leg brackets to body, make sure brackets are straight up and down (90° to floor).

Step 3. Drill mount holes into body cross member with 3/16”drill bit and bolt brackets on with 1/4”x 3/4”self tapping screws.

Note: Watch out for wiring for “police package” rear deck lights. The bottom of front leg brackets just rests on floor.

Step 4. Rear adjustable brackets can now be attached to the underside of package tray (Also try to keep these brackets straight). Using 1/4”drill bit, drill through slot in bracket into package tray.

Note: This hole should be accessible from the pre-existing oblong hole in package tray so you will be able to use the 1/4”x 3/4”screws, washers and nuts to attach (one on each side). Do your final side-to-side adjustment and tighten hardware. Using 3/16”drill bit, drill additional hole through a slot in bracket into package tray. Fasten with 1/4”x 3/4” self tapping screws (one each side).

Step 5. Your final (up and down) adjustments can now be made. Level as desired and tighten 1/4”hardware.

Step 6. Attach rubber edge guard to rear lip of tray.

Step 7. You may now mount equipment onto tray.

Trunk Tray Installation Instructions

Final Notes:

A. The slide tray should move smoothly from front to back. Thespring plunger pins should easily lock in when tray is pushed forward to its locked position. The spring plungers must be pulled out in order to release and slide out the tray.

Note: The spring plungers have a 1/4turn override that disables the spring pin.

B. When slide tray is in the “out” position, do not lean heavily on tray with your body. This may damage the slides.

C. The perforated holes at the front of the tray are used for wire tying harnesses. All harnesses should exit the tray at the sides- rearward of front aluminum brackets.

Trunk Trays

• Provides additional mounting surface• Easy to service equipment• Simple slide & latch design• 14 gauge steel with black powder coat finish• Mounts per Ford 2003 CVPI.com guide lines

Does the spare tire need to be removed in order to mount a C-3190P?

Trunk Tray Question

Page C89

C-TIR3-IMP Bracket

Questions

• Does Havis-Shields offer a console for 2001 Ford Escape?

• What is the #1 selling feature of an Angled Series Console?

• What makes the C-Series unique from other console brands?

• What is the most important feature of the C/TM Series?

• How many VS consoles does Havis-Shields offer?

• Will a C-AP fit into how many C-AS series consoles?

• How many armrests can be used with a Trak-mount? Part numbers?

• What model TCB would you suggest for a C-3010 console?

• What is the maximum width laptop that can be used with a C-3090?

• Does the spare tire need to be removed in order to mount C-3190P?

Quiz

• Provide part numbers for installing the following. The customer has:– Whelen Cencom (# CCSRN)– Motorola MCS 2000 Remote– Map light & 12 volt socket– Dell Laptop– Would prefer AS console– Wants an armrest

Quiz Answers

– C-EB40-CCS-1P– C-EB30-MCR-1P– C-ML-LP– C-3090-2– Recommend C/TM

console• C-1400TM

– C-ARM-3

– C-AS-1325– C-TCB-7– C-ML-LP– C-3090-3– C-TM-CV– C-CB-1

Consolidator® Switch Panel Wiring Diagram

Material list

3 ft. 16 gauge wire

28 ft. 14 gauge wire

1 16-14 Nylon ring terminal GSM 20258

1 16-14 Ring terminal GSM 20256

3 16-14 gauge female connectors GSM20224

2 16-14 gauge butt connectors GSM20208

1 14-amp fuse holder GSM20153

1 20-amp fuse GSM20228

12345678

C-SB and C-SP-3B (Reverse View)