1

CC-688CC-688CC-688CC-688 SeriesSeriesSeriesSeries MobileMobileMobileMobile PhonePhonePhonePhone StartStartStartStart

PushPushPushPush StartStartStartStart CarCarCarCar //// RemoteRemoteRemoteRemote StartStartStartStart CarCarCarCar SystemSystemSystemSystem UserUserUserUser ManualManualManualManual

Welcome to use this mobile start car engine cal alarm system CC-688/688P/688G, This product is

with GPS module and GSM module (CC-688G), It has normal remote start engine car alarm function,

also it has many new and unique functions, such as remote start car engine with mobile phone and

remote, lock unlock door with mobile phone, receive alarm information with mobile phone, locate current

location and upload to server, display history tracking (CC-688G), push start button to start car engine,

and CC-688P also has PKE auto sensing function (auto unlock & disarm car when walking close to car,

and auto lock / arm car after leaving car) etc. It can turn on the air conditioner first to warm or cool the car,

and no distance limited even the car is in the underground park (need GSM signal), only install a

software on your mobile phone is OK, it is not necessary to remember instruction, password & phone

number.

The system use SMS to control, no platform necessary and no platform service charge, it can use

prepaid GSM SIM card or any other GSM SIM card, the using charge is very low, only SMS charge, no

other service charge, the mobile phone software can be downloaded from website, you can use mobile

phone or PC to download and then install on the mobile phone, please select the proper version of the

software for the mobile phone, the software suit for iPhone (Download & install from apple app store),

Android, Balckberry & Symbiam platform mobile phone, and mobile phone that support Java software

(Most mobile phone support).

Mobile phone software download website: www.999car.mobi

Real time tracking platform: www.999gps.com

Demo user name: 123456, Password: 123456

2

���� RemoteRemoteRemoteRemote OperationOperationOperationOperation

P1/P2/P3P1/P2/P3P1/P2/P3P1/P2/P3 areareareare PKEPKEPKEPKE autoautoautoauto sensingsensingsensingsensing autoautoautoauto locklocklocklock unlockunlockunlockunlock remote,remote,remote,remote, thethethethe systemsystemsystemsystem willwillwillwill autoautoautoauto

disarmdisarmdisarmdisarm &&&& unlockunlockunlockunlock thethethethe doordoordoordoor whenwhenwhenwhen closeclosecloseclose totototo car,car,car,car, andandandand autoautoautoauto armarmarmarm &&&& locklocklocklock thethethethe doordoordoordoor afterafterafterafter

leavingleavingleavingleaving fromfromfromfrom car,car,car,car, andandandand AAAA &&&& BBBB remoteremoteremoteremote isisisis normalnormalnormalnormal remote,remote,remote,remote, thethethethe operationoperationoperationoperation ofofofof locklocklocklock unlockunlockunlockunlock

needneedneedneed useruseruseruser presspresspresspress thethethethe remoteremoteremoteremote buttonbuttonbuttonbutton bybybyby hand.hand.hand.hand.

P1P1P1P1 PKEPKEPKEPKE remoteremoteremoteremote P2P2P2P2 PKEPKEPKEPKE remoteremoteremoteremote P3P3P3P3 PKEPKEPKEPKE remoteremoteremoteremote

ArmArmArmArm //// LockLockLockLock

Normal state, press once this button, lock the door and enter arm state.

Driving state, press once this button, lock the door.

Alarming state, press once this button, stop alarming temporarily.

DisarmDisarmDisarmDisarm //// UnlockUnlockUnlockUnlock //// TrunkTrunkTrunkTrunk ReleaseReleaseReleaseRelease

Arm state, press once this button, unlock the door and disarm the car.

Alarming state, press once this button, disarm and stop alarming and unlock the door.

Driving state, press once this button, unlock the door.

Driving state, press 3 times this button, turn off the engine.

Normal state, press this button 2 seconds, trunk release.

orororor MuteMuteMuteMute ArmArmArmArm //// FindingFindingFindingFinding CarCarCarCar //// Anti-TheftAnti-TheftAnti-TheftAnti-Theft

Normal state, press once this button, lock the door, enter mute arm state.

Arm state, press once this button, flash light for finding car.

Driving state, press twice this button, enter anti-theft state

TrunkTrunkTrunkTrunk releasereleasereleaserelease

Disarm state, press this button 2 seconds, trunk release.

or FindingFindingFindingFinding CarCarCarCar withwithwithwith SoundSoundSoundSound

3

Arm state, press once this button, flash light and beep siren a while.

orororor >>>> RemoteRemoteRemoteRemote startstartstartstart carcarcarcar engineengineengineengine

Arm state, press once orororor first, the light will flash, and then press in 2 seconds, the

system will start car engine immediately, if the button is not pressed in 2 seconds, the car will

back to arm state.

++++ EnableEnableEnableEnable //// DisableDisableDisableDisable MaintainMaintainMaintainMaintain modemodemodemode

In disarm state, press the and at the same time and do not release about 2

seconds, the siren will beep once, the system enable or disable the maintain mode, in

maintain mode, the system only have remote lock unlock function, no alarm function.

++++ ++++ orororor EnableEnableEnableEnable //// DisableDisableDisableDisable PKEPKEPKEPKE remoteremoteremoteremote autoautoautoauto sensingsensingsensingsensing functionfunctionfunctionfunction

press these 3 button at the same time and do not release over 4 seconds, the LED on

the remote will change from flashing to ON, release the button, the remote PKE auto

sensing function is enable, press these 3 button at the same time and do not release

over 4 seconds, the LED on the remote will change from flashing to OFF, release the

button, the remote PKE auto sensing function is disable.

AAAA remoteremoteremoteremote BBBB FoldingFoldingFoldingFolding remoteremoteremoteremote

ArmArmArmArm //// LockLockLockLock

Normal state, press once this button, lock the door and enter arm state.

Driving state, press once this button, lock the door.

4

Alarming state, press once this button, stop alarming temporarily.

DisarmDisarmDisarmDisarm //// UnlockUnlockUnlockUnlock //// TrunkTrunkTrunkTrunk ReleaseReleaseReleaseRelease

Arm state, press once this button, unlock the door and disarm the car.

Alarming state, press once this button, disarm and stop alarming and unlock the door.

Driving state, press once this button, unlock the door.

Driving state, press 3 times this button, turn off the engine.

Normal state, press this button 2 seconds, trunk release.

MuteMuteMuteMute ArmArmArmArm //// FindingFindingFindingFinding CarCarCarCar //// Anti-TheftAnti-TheftAnti-TheftAnti-Theft

Normal state, press once this button, lock the door, enter mute arm state.

Arm state, press once this button, flash light for finding car.

Driving state, press twice this button, enter anti-theft state

FindingFindingFindingFinding CarCarCarCar withwithwithwith SoundSoundSoundSound

Arm state, press once this button, flash light and beep siren a while.

>>>> RemoteRemoteRemoteRemote startstartstartstart carcarcarcar engineengineengineengine

Arm state, press once first, the light will flash, and then press in 2 seconds, the system will

start car engine immediately, if the button is not pressed in 2 seconds, the car will back to arm

state.

++++ EnableEnableEnableEnable //// DisableDisableDisableDisable MaintainMaintainMaintainMaintain modemodemodemode

In disarm state, press the and at the same time and do not release about 2

seconds, the siren will beep once, the system enable or disable the maintain mode, in

maintain mode, the system only have remote lock unlock function, no alarm function.

���� PKEPKEPKEPKE autoautoautoauto sensingsensingsensingsensing function:function:function:function: (Only(Only(Only(Only forforforfor CC-688P)CC-688P)CC-688P)CC-688P)For 688P system, the remote is PKE auto sensing remote, when user bring the remote walking close

to the car about 2 meters, the system will disarm and unlock the car automatically, and after user bring theremote walking away from the car about a few seconds, the system will arm and lock the car automatically,it is not necessary to press the lock unlock button, and you will never forget lock the door.

Note:Note:Note:Note:

★ The 2 PKE remote can be used together, but you can not leave the unused remote in the

car, other wise the system will not arm and lock door automatically.

★ Also you can press the button lock unlock door manually, this will not prevent the system

lock unlock car automatically.

★ If in the 48 hours (2 days), user did not press the remote to control the car or walk close to

the door, the system will stop auto sensing function to save car battery, this means after 48

5

hours, when you walk close to the car, the system will not unlock the door automatically, you

need press the remote unlock button to disarm & unlock door manually, and later the auto

sensing function will back to normal.

EnableEnableEnableEnable //// disabledisabledisabledisable thethethethe remoteremoteremoteremote autoautoautoauto sensingsensingsensingsensing function:function:function:function:

Press the ++++ ++++ orororor 3333 button at the same time and do not release over 4

seconds, the LED on the remote will change from flashing to ON, release the button, the remote

PKE auto sensing function is enable, press these 3 button at the same time and do not release

over 4 seconds, the LED on the remote will change from flashing to OFF, release the button, the

remote PKE auto sensing function is disable.

After the remote PKE auto sensing function is disable, the PKE remote is same with normal

remote, the button can be pressed to control the car, but can not unlock door automatically.

Note:Note:Note:Note:

★ When the PKE remote is kept for backup, please disable the auto sensing function to

save the remote battery. If the auto sensing function is not disabled, the remote battery

only can be used about 1 year.

★ The PKE remote is disable auto sensing function by default, please enable the auto

sensing function after installation.

���� RemoteRemoteRemoteRemote Operation:Operation:Operation:Operation:

ArmArmArmArm StateStateStateStateNormal state, press once, the light flash once and the siren beep once, lock the door and engine,

enter arm state. If the door is not close properly, the siren will beep 3 times to warn you close the door andarm again.

After the car enter arm state 8 seconds, if the car have a shock, the system will beep several times.In the arm state, if the door is opened or the key is turned to ON, the siren will alarm continuously, the

light will flash. after 5 minutes, only flash light to warn you the car is alarming.When the car is alarming, if the trigger stoped,10-30 seconds later, the system will stop arming, press

, can stop arming temporary, still in arm state, press , can stop arming, and disarm thesystem.

MuteMuteMuteMute ArmArmArmArmPress once, the siren will not beep, only flash light, lock the door and engine, enter mute arm

state.In the mute arm state, if the car have been attack, the system will flash light only, the siren will not

beep, but if the door is opened, the siren still alarm with siren & flash light.

DisarmDisarmDisarmDisarmPress once, disarm the system, the siren beep twice, flash light twice, unlock the door and

engine.If the car was broken, the siren will beep 4 times, warn the car owner to check the car.

6

AutoAutoAutoAuto RearmRearmRearmRearmAfter the car owner disarm and unlock the car, 15 seconds later, if the owner don't open the door or

start the engine , the system will auto lock the door and enter arm state again.

AlarmingAlarmingAlarmingAlarming TemporarilyTemporarilyTemporarilyTemporarily //// DisarmDisarmDisarmDisarmWhen alarming, press . can stop alarming temporarily, the system is still in arm state. Press

can stop alarming and disarm the car, unlock the door.

FindingFindingFindingFinding CarCarCarCarFlashing finding: press, flashing light.

Anti-theftAnti-theftAnti-theftAnti-theftIn driving state, press key once, the light will flash, press this key again in 4 seconds, the car

flashing 15 seconds, the horn sound 15 seconds, then turn off the car, lock the engine. Press once canstop the anti-theft.

AutoAutoAutoAuto LockLockLockLock DoorDoorDoorDoor WhenWhenWhenWhen DrivingDrivingDrivingDriving15 seconds after start the engine and close the door, when step the foot brake, the system will lock

the door, when turn the car OFF, the system will unlock the door automatically.

AlarmingAlarmingAlarmingAlarming RecordRecordRecordRecordIf the car have been attacked, when you press the to disarm the car, the siren will beep 4 times,

warn the car owner to check the car.

WindowWindowWindowWindowAutoAutoAutoAuto CloserCloserCloserCloser ControlControlControlControl

After lock the door and enter arm state, the AUX wire will output a long pulse or2 pulse to enable the OEM

windows controller to close the windows, this function only suit for the car that has this auto close windows

function.

RemoteRemoteRemoteRemote TrunkTrunkTrunkTrunk ReleaseReleaseReleaseRelease

After disarm the car, press or 2 seconds, trunk release.

RemoteRemoteRemoteRemote StartStartStartStart EngineEngineEngineEngine (688/688P/688G)(688/688P/688G)(688/688P/688G)(688/688P/688G)

In arm state, press or , flashing light, then press in 2 seconds , the system will turn on the ON

signal and then begin to start car engine, if the key is not pressed in 2 seconds, the system will back to arm

state. If the engine is not easy to start in winter, the system will start the engine 6 times till success.

After start engine, light will flash, 20 seconds later, turn on the ACC, the air conditioner will work to warm or

cool the car (it will continue the state of the air conditioner before turn off the engine, please do not turn off the

air conditioner manually before turn off engine).

In warming car state, press or , turn the engine off, back to the arm state, press , the siren

beep twice, unlock the door and disarm the car, flashing light fast, the driver can open the door in 30 seconds

then turn the car key to ON position and driving away (if the push start button is installed, the engine will not turn

off after unlock door, unless you press 3 times remote unlock button or step the foot brake and press the push

start button).

7

Warming car time is 15 minutes, if driver did not unlock the door in this period, the system will turn off car

engine automatically, and back to arm state.

If the handbrake is not pulled up, the car will beep 4 times and will not start .

Notes:Notes:Notes:Notes: 1.1.1.1. PleasePleasePleasePlease confirmconfirmconfirmconfirm thethethethe handbrakehandbrakehandbrakehandbrake isisisis pullpullpullpulledededed upupupup andandandand thethethethe geargeargeargear isisisis inininin PPPP positionpositionpositionposition beforebeforebeforebefore getgetgetget offoffoffoff thethethethe car,car,car,car,

thenthenthenthen youyouyouyou cancancancan remoteremoteremoteremote startstartstartstart thethethethe car.car.car.car.

2.2.2.2. IIIIffff thethethethe OEMOEMOEMOEM carcarcarcar keykeykeykey isisisis RFIDRFIDRFIDRFID keykeykeykey BuiltBuiltBuiltBuilt inininin RFIDRFIDRFIDRFID ICICICIC (Can(Can(Can(Can notnotnotnot startstartstartstart engineengineengineengine withwithwithwith duplicatedduplicatedduplicatedduplicated carcarcarcar

key),key),key),key), youyouyouyou needneedneedneed installinstallinstallinstall thethethethe bypassbypassbypassbypass RFIDRFIDRFIDRFID controlcontrolcontrolcontrol modulemodulemodulemodule totototo passpasspasspass IDIDIDID keykeykeykey checkingcheckingcheckingchecking beforebeforebeforebefore startstartstartstart

carcarcarcar engineengineengineengine bybybyby remoteremoteremoteremote orororor bybybyby pushpushpushpush startstartstartstart button.button.button.button.

EnableEnableEnableEnable //// DisableDisableDisableDisable MaintainMaintainMaintainMaintain modemodemodemode

In disarm state, press the and at the same time and do not release about 2

seconds, the siren will beep once, the system will enable the maintain mode, in maintain mode,

the system only have remote lock unlock function, no alarm function, no PKE function, only used

as remote locking system. In maintain mode, press the and at the same time and do not

release about 2 seconds, the siren will beep once, the system will disable the maintain mode and

back to normal state.

Note:Note:Note:Note:

★ Only in disarm state press the 2 button can enter maintain mode.

LearnLearnLearnLearninginginging RemoteRemoteRemoteRemote

After disarm the car, press the SOS button on the system over 3 seconds, the siren will beep once,

release the button, then press any key of the remoter once, the system will beep once again, the remote is

learned to the system, then press another remote any button once, the system will beep once again, so the

second remote is learned to the system, and exit the remote learning process.

Remote Delete: after learn new remote, the old remote will be deleted, even you only learn one remote.

Note:Note:Note:Note: thisthisthisthis systemsystemsystemsystem cancancancan onlyonlyonlyonly acceptacceptacceptaccept 2222 remotesremotesremotesremotes,,,, andandandand thethethethe remoteremoteremoteremote learninglearninglearninglearning needneedneedneed bebebebe finishedfinishedfinishedfinished inininin 5555

seconds.seconds.seconds.seconds.

ChangeChangeChangeChange remoteremoteremoteremote batterybatterybatterybattery

When the remote distance is becoming short , LED on remote become dark or the sensitivity of the auto

sensing function is low, maybe the power of the remote battery is low, please change the battery. Normally the

battery of the PKE remote can be used about 1 year, and the battery of the normal remote can be used about 2

years.

Note:Note:Note:Note: PKEPKEPKEPKE remoteremoteremoteremote useuseuseuse CR2032CR2032CR2032CR2032 buttonbuttonbuttonbutton battery,battery,battery,battery, andandandand normalnormalnormalnormal remoteremoteremoteremote useuseuseuse CR2016CR2016CR2016CR2016 buttonbuttonbuttonbutton battery.battery.battery.battery.

8

���� PushPushPushPush startstartstartstart buttonbuttonbuttonbutton startstartstartstart engine:engine:engine:engine:

PushPushPushPush StartStartStartStart ButtonButtonButtonButton

Press remote unlock button, the system disarm the car, then the blue circle back light on the start button

will turn on, step the foot brake, and then press once the start button in 3 minutes, the car will begin to start, if

the start button is pressed and not released, the system will keep start car motor at least 5 seconds.

After the car is started, Step the footbrake, press the start button 1 seconds then release, the car engine

will be turn off, if the footbrake is not step, the siren will beep 3 times to warn you and will not turn off.

If press once start button can not start car engine success, step the footbrake & don’t release and press

the start button 1 seconds to turn off the system, and then press again the start button and hold on a little long

time, then the car engine will be started. Then release the footbrake.

After the car is started by push start button or remote start or mobile phone start, the car can be turned off

by push start button, or press remote unlock button 3 times to turn off the car, or press 3 times the mobile

phone unlock button, to turn off the car.

If in the 3 minutes, the engine is not started, the system will lock the push start button, you can not press

the push start button to start engine any more, you need disarm / unlock the door again, then another 3

minutes you can push start button to start car engine.

If the footbrake is not step, press once the start button, the car will turn on ACC, press once again, the car

will turn on ON, press once again, the car will back to OFF.

Notes:Notes:Notes:Notes: 1.1.1.1. AfterAfterAfterAfter 3333 minutesminutesminutesminutes disarmdisarmdisarmdisarm orororor turnturnturnturn offoffoffoff thethethethe car,car,car,car, thethethethe backlightbacklightbacklightbacklight ofofofof thethethethe startstartstartstart buttonbuttonbuttonbutton willwillwillwill bebebebe turnedturnedturnedturned off,off,off,off,

andandandand thethethethe carcarcarcar cancancancan notnotnotnot bebebebe startedstartedstartedstarted anyanyanyany more,more,more,more, ifififif youyouyouyou wantwantwantwant startstartstartstart thethethethe car,car,car,car, youyouyouyou needneedneedneed disarmdisarmdisarmdisarm thethethethe carcarcarcar

againagainagainagain bybybyby remoteremoteremoteremote orororor mobilemobilemobilemobile phone.phone.phone.phone.

2.2.2.2. InstallInstallInstallInstall pushpushpushpush startstartstartstart buttonbuttonbuttonbutton needneedneedneed disabledisabledisabledisable thethethethe OEMOEMOEMOEM steeringsteeringsteeringsteering wheelwheelwheelwheel locklocklocklock first,first,first,first, copycopycopycopy aaaa carcarcarcar keykeykeykey totototo

insertinsertinsertinsert thethethethe keykeykeykey hole,hole,hole,hole, andandandand turnturnturnturn thethethethe duplicateduplicateduplicateduplicate carcarcarcar keykeykeykey totototo ONONONON position,position,position,position, andandandand thethethethe OEMOEMOEMOEM wirewirewirewire socketsocketsocketsocket

onononon thethethethe carcarcarcar keykeykeykey needneedneedneed removeremoveremoveremove offoffoffoff andandandand connectconnectconnectconnect totototo thisthisthisthis GSMGSMGSMGSM startstartstartstart system.system.system.system.

RemoteRemoteRemoteRemote TurnTurnTurnTurn OffOffOffOff EngineEngineEngineEngine

After remote start engine or use push start button to start car engine, press 3 times to unlock the

door, the car engine will be turned off.

���� SOSSOSSOSSOS EmergencyEmergencyEmergencyEmergency HelpHelpHelpHelp

When car engine is running, press SOS button over 5 seconds, the system will send HELP information

to authorized number that saved in the system by SMS, and CC-688G also have the location map website link.

And the SMS example is as follow:

9

SOS alarm.

http://www.followmegps.mobi/map.aspx?lat=22.679926&lng=114.147263&l=cnhttp://www.followmegps.mobi/map.aspx?lat=22.679926&lng=114.147263&l=cnhttp://www.followmegps.mobi/map.aspx?lat=22.679926&lng=114.147263&l=cnhttp://www.followmegps.mobi/map.aspx?lat=22.679926&lng=114.147263&l=cn

Notes:Notes:Notes:Notes: pleasepleasepleaseplease addaddaddadd presetpresetpresetpreset phone,phone,phone,phone, ifififif thethethethe presetpresetpresetpreset phonephonephonephone numbernumbernumbernumber isisisis notnotnotnot set,set,set,set, thethethethe SOSSOSSOSSOS informationinformationinformationinformation cancancancan

notnotnotnot bebebebe sent.sent.sent.sent.

���� EmergencyEmergencyEmergencyEmergency ResetResetResetReset

EmergencyEmergencyEmergencyEmergency resetresetresetreset (No(No(No(No installinginstallinginstallinginstalling pushpushpushpush startstartstartstart button)button)button)button): When the system is fault, you can use

your car key to open the door, and the system will alarming, insert car key and turn the key from OFF to ON then

to OFF 8 times, the siren will beep once and the system is reset and disarmed.

EmergencyEmergencyEmergencyEmergency resetresetresetreset (After(After(After(After installinginstallinginstallinginstalling pushpushpushpush startstartstartstart button)button)button)button):When the system is fault, you can use

your car key to open the door, and the system will alarming, press the SOS button on the system over 2

seconds, release the button, the siren will beep once and the system is reset and disarmed.

���� SelectionSelectionSelectionSelection ProgramProgramProgramProgram:

After disarm the car, press the SOS button on the system over 6 seconds, after 3 seconds the siren will

beep once, after 6 seconds the siren will beep once again, release the button, then the system enter the

program select function process, use the remote unlock button to enable the function (alarm beep twice to

confirm) and the remote lock button to disable the function (alarm beep once to confirm ), the first selection is

No 1 selection, press the SOS button once can go to the next selection, the system will beep several times to

indicate the number of selection, the number of beep times is the selection number to confirm which selection

is processing, 5 seconds later if you don't do anything, the system will save current setting and terminate the

program select function process, the following is the selection guide.

NO Press select function(default) Press select function

Select 1 Single pulse unlock Double pulse unlock door

Select 2 Have arm disarm beep tone No arm disarm beep tone

Select 3 Door open flashing light Door open no flashing light

Select 4 0.7s door motor drive time 4s air compressor lock

Select 5 One pulse window closer control Double pulse window closer control

Select 6 No auto arm function Have auto arm function

Select 7 Accept dome light delay 10s Accept dome light delay 60s

Select 8 For future using For future using

Select 9 For future using For future using

Select 10 For future using For future using

10

� The default state is the same with press select the function

� Select 1: Double pulse unlock. Some cars press remote unlock button once only unlock driver's

door, the seconds time press unlock button will unlock all the door, for theses cars select double pulse

unlock door, when you press remote unlock button once, the system will output double pulse to unlock all

the doors.

� Select 8: Arm disarm beep tone. When arm disarm the car the system have beep once or twice to

confirm, you can disable the beep tone to avoid disturb the other peoples.

� Select 3: The turn light will flash about 15 seconds when open the door in normal state and

driving state, disable this selection the light will not flash when open the door.

� Select 4: Air compressor lock drive selection. For Audi and Benz the door is drive by compressor

air, the driving time must be 4 seconds, select this function can extend the drive time to 4 seconds.

� Select 5: OEM windows closer control. For some cars like AUDI. Jetta. Passat, they have the

original windows auto closer, when lock the door, the system will output a long pulse signal on AUX wire to

drive the OEM auto closer to close all the windows automatically. And for some another cars like Honda

they need double to drive the OEM windows auto closer, when arm the car, the system will output double

pulse on the AUX wire to drive OEM auto closer to close all the windows automatically. But many cars

have not this function, so please check before connect this AUX wire.

� Select 6: Auto arm function. When enable this function, after driver turn off the car and close the

door, 30 seconds later, the system will arm automatically, but the door will not lock to avoid lock your car

keys in the car, the door open/ shock/ turn on alarm is same with the normal, you can press the lock button

to lock the door. function can avoid the driver forget arm the car and will not lock the car key in the car.

� Select 7: Accept 60 seconds dome light delay. Many cars the dome light will delay turn off when

close the door, normally the door open signal is connected to the dome light, then after close the door, the

door open signal delay a while, this system can accept 10 seconds dome light delay, you can select this

function to extend this time to 60 seconds.

� Select 8: For future using.

� Select 9: For future using.

� Select 10: For future using.

���� GSMGSMGSMGSM &&&& GPSGPSGPSGPS OperationOperationOperationOperation(only(only(only(only suitsuitsuitsuit 688688688688/6/6/6/688P88P88P88P////688G688G688G688G))))

� InstallInstallInstallInstall SIMSIMSIMSIM cardcardcardcard totototo system:system:system:system: First to buy a 2G GSM phone SIM card, which needs SMS service and

incoming caller ID display function, and please disable the PIN code of the SIM card(Most SIM card

have SMS and caller ID function, this SIM card phone number is the system number and all the

11

operations to the system is this number), for 688G also need enable GPRS function, insert the SIM

card into the main unit, after power on the main unit, the system LED will turn on, and the GSM LED

will flash fast, the system begin to search GSM network, After get the GSM network, GSM LED will

flash slowly, if no SIM card installed, GSM LED will keep ON.

Note:Note:Note:Note:

★ This system only use 2G GSM network, it can not used in 3G network.

★ The SIM card needs SMS service, voice service and incoming caller ID display function, for 688G

also need enable GPRS function, please disable the PIN code of the SIM card.

★ Before install the SIM card, please power off the system first.

★ After installation, please add preset phone first, and change the password.

★ If the system can not find the GSM network, please confirm the following:

1. The SIM card is 2G GSM card.

2. The card is installed properly.

3. Please disable SIM card PIN code (it is not necessary to input password when power

on ).

4. Please confirm the signal of current place is good.

���� GSMGSMGSMGSM REDREDREDRED LEDLEDLEDLED IndicatorIndicatorIndicatorIndicator ::::

RED LED Flash once : GSM & GPS signal well

RED LED Flash twice : GSM signal well and no GPS signal

RED LED ON continuously : GSM searching network

RED LED Flash fast : incoming a call or sending SMS

���� GPSGPSGPSGPS LEDLEDLEDLED indicatorindicatorindicatorindicator ::::

GREEN LED Flash : GPS signal well

GREEN LED ON continuously : Searching GPS signal

���� BackBackBackBack totototo defaultdefaultdefaultdefault setsetsetset

Before the main unit power on press the SOS button on the main unit and don’t release, power

on the main unit, till the GSM led flash 6 seconds and release the SOS button, the system is reset to

default factory configuration.

Notes: Under this condition all preset phone number and password had been delete, all the system

setting back to default, and the password is changed to default : 123456.

���� GSMGSMGSMGSM //// GPSGPSGPSGPSAntennaAntennaAntennaAntenna ::::

The system use external GSM & GPS antenna, this can make the system have good signal, it is

12

better to put the antenna in hidden place, after installation please try the different place to get good

signal.

���� SMSSMSSMSSMS InstructionInstructionInstructionInstruction OperationOperationOperationOperation

Preset phone number is phone number that used for sending alarm information and start car engine

by mobile phone and listen the sound of the car etc. when the car is alarming, the system will send

alarm information to the preset phone number, and only preset phone can control the car to start

engine, and only preset phone call the system can listen the sound in car. And only preset phone call

the system can trigger to locate to send back current location information (CC-688G). And all the SMS

instruction need preset phone to operate (except the addphone command), SSSSoooo pleasepleasepleaseplease addaddaddadd presetpresetpresetpreset

phonephonephonephone firstfirstfirstfirst beforebeforebeforebefore using.using.using.using.

���� AddAddAddAdd presetpresetpresetpreset phonephonephonephone numbernumbernumbernumber bybybyby SMSSMSSMSSMS

Send SMS“ADDPHONE*123456*A*number”(Not including the quotation marks “ ”, Number

means the telephone number you want preset, the following is same) to alarm is OK, “ADDPHONE” is

a command; “123456” is password; “A” is preset number location, every alarm have is 2 preset phone

number location, A , B , so you can preset 2 phone number, if the add operation is success, the

system will send back the information ”Add Preset Phone OK”, if the password is not right, the

operation is fault.

���� DeleteDeleteDeleteDelete presetpresetpresetpreset phonephonephonephone numbernumbernumbernumber bybybyby SMSSMSSMSSMS

Send SMS “DELETEPHONE*123456*A” to the system, “DELETEPHONE” is a command;

“123456” is password; “A” is preset phone number location, there is 2 location “A” and “B”; if the

delete operation is success, the system will send back the information ”Delete Preset Phone OK”, if

the password is not right, the operation is fault.

���� CheckCheckCheckCheck presetpresetpresetpreset phonephonephonephone numbernumbernumbernumber bybybyby SMSSMSSMSSMS

Send SMS “CHECKPHONE*123456” to alarm, “CHECKPHONE” is a command; “123456” is

password; if the operation is success, the system will send back the information “Preset Phone A:

13912345678；B：13012345678；the phone number is just an example. if the password is not right,

the operation is fault.

���� ChangeChangeChangeChange systemsystemsystemsystem passwordpasswordpasswordpassword

Send SMS “CHANGEPASSWORD*123456*888888” to alarm, “CHANGEPASSWORD” is a

command; “123456” is old password; “888888” is new password; if the operation is success, the

system will send the information “ New Password：888888” to every preset phone number, if the

password is not right, the operation is fault.

13

���� CheckCheckCheckCheck alarmalarmalarmalarm passwordpasswordpasswordpassword

Send SMS “CHECKPASSWORD” to the system, “CHECKPASSWORD” is a command, if the

operation is success, the system will send back the information “Password：888888”; “888888”is an

example.

Notes: System default password is: 123456.

���� LLLListenistenistenisten SoundSoundSoundSound inininin CarCarCarCar

Using preset phone call the system, keep ring till the system pick up the call automatically, then

you can listen the sound in the car.

� Only preset phone can listen the sound, the other phone call the system, it will not pick up the

calling, if the preset phone is not set, then any phone can listen the sound.

���� EnableEnableEnableEnable uploaduploaduploadupload trackingtrackingtrackingtracking totototo websitewebsitewebsitewebsite (CC-688G)(CC-688G)(CC-688G)(CC-688G)

send a SMS “STARTUPLOAD*123456” to the system can enable the upload tracking function,

“STARTUPLOAD” is a command, 123456 is the system password, if the operation is success, the

system will send back the information “Start upload OK”, and later or next time, it is not necessary to

send SMS to enable the function again, every time the car begin to move, the system will upload

tracking to the website, and when the car stop moving, the system will stop upload tracking.

Note:The system default setting is not uploading tracking to website, so you need send this SMS

first to enable the upload tracking before using this function.

���� DisableDisableDisableDisable uploaduploaduploadupload trackingtrackingtrackingtracking totototo websitewebsitewebsitewebsite (CC-688G)(CC-688G)(CC-688G)(CC-688G)

send a SMS “STOPUPLOAD*123456” to the system can enable the upload tracking function,

“STOPUPLOAD” is a command, 123456 is the system password, if the operation is success, the

system will send back the information “Stop upload OK”, and later or next time, the system will not

upload tracking to website again unless you enable this function again.

���� LocateLocateLocateLocate immediatelyimmediatelyimmediatelyimmediately bybybyby mobilemobilemobilemobile phonephonephonephone (CC-688G)(CC-688G)(CC-688G)(CC-688G)

Using preset phone call the system, after ring 3 times, hang up the call, the system will locate

immediately, a few seconds later, the system will send back the SMS location information (map

website link) of current location to the caller. Using mobile phone to click the website link to visit

internet, and the location describe in text and location on map will display the mobile phone (this

operation will cost GPRS data when visit website, and your mobile phone need enable the GPRS

function). If the system has not preset number, any phone call can trigger the system to locate

immediately, if the tracker has preset number, then only preset phone call can trigger the tracker to

locate immediately. the SMS information sample is as follow:

14

http://www.followmegps.mobi/map.aspx?lat=40.756441&lng=-73.986378&l=en

Battery:91%

� Please hung up the phone immediately after the connecting ring 3 times, otherwise the system

will go to listening process.

���� SendSendSendSend aaaa SMSSMSSMSSMS triggertriggertriggertrigger locatelocatelocatelocate (CC-688G)(CC-688G)(CC-688G)(CC-688G)

Send SMS “SMSLOCATE*123456” to the tracker, “SMSLOCATE” is a command, “123456” is

password; the system will locate immediately and send back the location information (map website

internet link) of current location to the caller. Use mobile phone that can visit the website to click the

website link to visit internet, and the location will display on the map on your phone(the mobile phone

SIM card need enable the GPRS function), if the password is not right, the operation is fault.

���� SetSetSetSet periodicalperiodicalperiodicalperiodical autoautoautoauto startstartstartstart andandandand warmwarmwarmwarm carcarcarcar ::::

1．Set periodical auto start and warm car

Send SMS “TIMINGSTART*123456*XX” to the system, “TIMINGSTART” is a command,

“123456” is password; “XX” is the time period that auto start and warm the car, unit is hour(0-24)), if

the operation is success, the tracker will send back the information “Set Automatic Startup

Successful” , if the password is not right, the operation is fault. After the operation, the car will start car

and warm 15 minutes every XX hours, and then turn off engine back to alarm status. This function

used in very clod place to avoid the car is too cold.

2. Cancel periodical auto start and warm car

Send SMS “CANCELTIMING*123456” to the system, “CANCELTIMING” is a command,

“123456” is password; if the operation is success, the tracker will send back the information “Cancel

Automatic Start Successful” .

���� RealRealRealReal TimeTimeTimeTime TrackingTrackingTrackingTracking (Only(Only(Only(Only suitsuitsuitsuit forforforfor 688G688G688G688G))))

� LLLLoooogongongongon andandandand trackingtrackingtrackingtracking onononon website:website:website:website:

Visit website www.999gps.com and logon with given user name & password, the vehicle current location

15

will display on map, and also can operate other function, such as 6 months history tracking play back, break

Geo-fence alarm, over speed alarm etc.

The logon page and tracking page are as follow:

Logon Page

Note: Some latest version of microsoft IE explore (IE8 or 9), the map or some menu maybe can not be displayed, this is

the IE forbidden some Java or plug in software, please click the “Compatibility View ”icon on the right of the

website address field, and then the map and some menu can be operated. For the other explore like Firefox,

Google Chrome, Opera, Apple Safari, it can work well, it is not necessary to change any setting.

Tracking Page

Note:Note:Note:Note:

★ Before using the real time tracking function, you need send SMS to enable the upload tracking function

(STARTUPLOAD*123456), and later, it is not necessary to send SMS again, every time the car begin to move,

the system will upload tracking to the website, and when the car stop moving, the system will stop upload

tracking.

★ Every device has a unique ID (S/N) number, it is print on the label on the main box, the last 6 digit is

User name & password

Select Language

Click “Logon” to logon

Logon Use name &

Computer Local Time

Playback, Alarm

& Geo-fence etc.

Tracker operation

Menu

Logout , Download

Refresh & Help

Platform Menu

Tracker status list

Map window

Current user

Tracker list

16

your unique platform user name, the password is same with user name, you can change the password

yourself, such as the S/N ID is CW0688C12345678, the user name for the platform is: 345678, password

is :345678.

★ If the ID is forgotten, send SMS “ID*123456” to the system can check the system ID. (ID is command,

and 123456 is default password, user can change it).

★ User can change the user information & vehicle information yourself on the website (vehicle name /

mobile phone number / owner information etc.), and user name can not be changed, if you need change user

name, please contact your dealer or us.

★ If the user is a fleet manage user, we can move all of your tracker to one user, and also every user can

have his own user name, please contact your dealer or us.

★ The detail operation guide for the platform, please refer the platform manual.

★ Not all the platform function can work with this CC-688G system, The platform is special design for our

GPS tracker, CC-688G can only use part of the function. Such as : current location display, history tracking

playback, over speed alarm, break Geo-fence alarm, etc.

★ The upload tracking will cost GPRS data charge, so please enable the GPRS function and order a

GPRS data package for the SIM card in the system, this system will cost 10-20M GPRS data every month

according the vehicle driving mileage.

���� MobileMobileMobileMobile phonephonephonephone controlcontrolcontrolcontrol carcarcarcar operationoperationoperationoperation

Visit website and download & install software on your mobile phone, first set the SIM card

number and password in the system, and add your mobile phone number as a preset phone

number by sending SMS to the system, and then you can control the car with your mobile

phone, for example: lock / unlock / start engine / locate car / finding car etc.

� SoftwareSoftwareSoftwareSoftware downloaddownloaddownloaddownload &&&& install:install:install:install:

All our mobile phone software is free, and it is very easy to install, visit the website

www.999car.mobi with your mobile phone, and select the proper model of your mobile

phone, and click the model, and the system will ask you to download the software to your

mobile phone, and then the software will install on your mobile phone automatically, you just

click the OK or Accept is ok.

1. Apple IOS iPhone software will link to the officially app store, you can download and

install the iPhone software on app store, and it is free, it is not necessary to do the IOS

Jailbreaking (you just need register an apple ID with email and verify it on the app store

17

http://store.apple.com is OK), the following is a example to install the software on

iPhone .

2. For the Android system mobile phone, click the “Google Android System”, the

android software will download to your mobile phone, after downloading it will notice you

to select it is allowed to install or not, you just click OK or Accept to allow the

downloading & installing is ok.

3. For the Nokia symbian system mobile phone, the software version is decided by the

screen pixel, for example Nokia E63 screen pixel is 320X240, so install the Display

Screen Pixel: 320X240 version is OK, if the display screen pixel can not find in the list,

find a similar screen pixel version is OK.

4.4.4.4. For the other system mobile phone please try the Java version software, and also java

software version is decided by the screen pixel, if the display screen pixel can not find in

the list, find a similar screen pixel version is OK.

Note:Note:Note:Note:★ Attention: For some mobile phone after installation the software, the remote start

software icon can be find in the Install or Program or Game menu, you canfind this icon and move it to the top menu.

� SoftwareSoftwareSoftwareSoftware Setting:Setting:Setting:Setting:

18

Click the icon Start Car( the software icon is , and the software will run on the mobilephone and the screen will pop up like the following picture, click the OTHER menu, and click SETTINGmenu, input the SIM number and password (default password is 123456, if you have changed thepassword then input the new password), this SIM card number and password is the number that used inthe main control box, not your mobile phone number. And further more, you need add your mobile phonenumber as an preset number, that means your mobile phone number need be added in the control box asa authorized phone number, the other phone can not control the car, you can add 2 phone number asauthorized phone number. So it is very safe to control the car.

� SoftwareSoftwareSoftwareSoftware Operation:Operation:Operation:Operation:

Click the icon Start Car, and the software will run on the mobile phone, clicking the “Lock” button on

the mobile phone screen is the same function with Pressing the “Lock” button on the remote, if the

operation success, mobile phone will receive a SMS “LOCK OK”; clicking the “UNLOCK” button on the

mobile phone screen is the same function with Pressing the “UNLOCK” button on the remote, if the

operation success, mobile phone will receive a SMS “UNLOCK OK”; clicking the “FINDING” button on the

mobile phone screen is the same function with Pressing the “Finding Car” button on the remote, if the

operation success, mobile phone will receive a SMS “FINDINGCAR OK”; clicking the “LOCATING” button

on the mobile phone screen will locate immediately, if the operation success, mobile phone will receive a

SMS map website link, click the link to visit website, the map will display on your mobile phone.

The mobile phone control the car is a backup, when your car remote is lost or remote battery is low,you can use the mobile phone to replace the remote.

� MobileMobileMobileMobile phonephonephonephone startstartstartstart carcarcarcar engine:engine:engine:engine:

Clicking the “Remote Start” button on the mobile phone, the mobile phone will send SMS to system, if

the operation success, then the mobile phone will receive a SMS “CAR STARTING”, after the car is

started sucess, the mobile phone will receive a SMS “CAR START success”, if the car can not be started,

the mobile phone will receive a SMS “Car START FAIL”. After the car is started, the light will flash, and 20

seconds later, the system will turn on ACC, this will make the air conditioner begin to cool or warm the car.

19

The warm car time is 15 minutes, the following process is the same with remote start engine.

Note: 1. Only the preset phone number can operate the car, please add preset phone number first before

using the mobile control. (Using ADDPHONE SMS instrtuction).

2. This system use SMS to control, some time maybe the GSM signal is not stable, the SMS

sending maybe delay, so the control operation maybe delay, this is normal. This delay control

information will not cause accident, the start command will bypass when driving, and after the

unlock command operation, the system will lock again automatically after a few seconds.

� MobileMobileMobileMobile phonephonephonephone startstartstartstart carcarcarcar engine:engine:engine:engine:

1）Car Shock Alarm to Preset Phone : After the car is attack by shock or move, the system will alarm

send a SMS to preset phone, the SMS is as follow:

Car SHOCK alarming

2）Car Door Open Alarm to Preset Phone : If the car door is opened illegal, the system will alarm

send a SMS to preset phone, the SMS is as follow:

Car DOOR OPEN alarming

3）Car Engine Started Alarm to Preset Phone : If the car engine is started illegal, the system will

alarm send a SMS to preset phone, the SMS is as follow:

Car START ENGINE alarming

���� InstructionInstructionInstructionInstruction ListListListList

Function SMS Instruction Note Reply Note

Add phonenumber

ADDPHONE*123456*A*13322990998

Any mobile phonecan operate

Add Preset PhoneOK

Reply to theoperation phone

Delete phonenumber

DELETEPHONE*123456*A

Only preset phonecan delete

Delete PresetPhone OK

Reply to theoperation phone

Check presetphone number

CHECKPHONE*123456

Only preset phonecan check

A: 13912345678B: 13322990033

Reply to theoperation phone

Change passwordCHANGEPASSWORD*123456*888888

Only preset phonecan change

New Password：888888

Reply to operationpreset phone

Check passwordCHECKPASSWORD

Only preset phonecan check

Password: 888888Reply to operationpreset phone

Set periodical autostart car

TIMINGSTART*123456*XX

XX is hours, from1-24, Only presetphone can set

Set AutomaticStartup Successful

Reply to operationphone

Cancel periodicalauto start car

CANCELTIMING*123456

Only preset phonecan set

Cancel AutomaticStartup Successful

Reply to operationphone

Check system IDnumber

ID*123456Only preset phonecan operate

ID:CW0688C12345678

Reply to operationphone

Enable upload STARTUPLOAD*12 Only preset phone Start upload OK. Reply to operation

20

tracking function 3456 can operate phone

Disable uploadtracking function

STOPUPLOAD*123456

Only preset phonecan operate

Stop upload OK.Reply to operationphone

Send SMS triggermap link reportlocation

SMSLOCATE*123456

Only preset phonecan operate

Current locationmap website link

Reply to operationphone

SOS EmergencyPress SOS buttonuntil the GREENLED turn off

HELP + locationinformation

Send SOS HELPinformation to allpreset phone

1.The default password is 123456, for example the tracker phone number is 13912345678, if you like set

the preset phone is 13322990033, then send SMS “ADDPHONE *123456*A*13322990033" to

13912345678 is OK, if the system reply "SET OK", it means operation is success.

2.Please add preset phone first then change the password.

3.Every alarm can set 2 preset phone number

4.All the SMS information is in English word, “*” is the star key, “” is not including in the SMS information, it

is just used to indicate the information.

Note: The alarm send or receive the SMS information maybe have some delay according the

current network, under weak signal or busy time, the delay maybe longer.

���� TroubleTroubleTroubleTrouble ShootingShootingShootingShooting

1. This system use 2G GSM network, the other network can not be used.

2. The SIM card need enable SMS service and incoming caller ID function, and the SIM card

PIN code should be disable, for 688G also need enable GPRS function.

3. After power on the alarm, the RED LED keep on, and it has not any repose, and no ring,

please confirm the SIM card has been installed properly, the SIM card PIN code is disable,

and the SIM card has enough charge, and the mobile phone can work well in that place. If

the alarm work well the RED LED will flash once every 4 seconds.

4. Most operation need by preset phone number, so please add the preset phone number first,

and operate with this phone.

5. No GPS signal, please confirm the GPS antenna has been placed in the open place, and

has connect firmly to the socket.

���� SelectionSelectionSelectionSelection guideguideguideguide forforforfor CC-688CC-688CC-688CC-688::::

Model Car alarm PKE auto lock unlock Push start button Remote start Phone start GPS tracking

688 ● ● ● ●

688P ● ● ● ● ●

21

688G ● ● ● ● ●

688A ● ● ●

688PA ● ● ● ●

688MS ● ●

688MSG ● ● ●

���� PartPartPartPart listlistlistlist andandandand picturepicturepicturepicture

CC-688 serial products have different parts, such as PKE remote, GPS module, GSMmodule, antenna etc.

No Part name QTY Description Remark

1 688 main control unit 1

2 PKE remote (315MHz) 2 Normal remote or PKE remote

3 Start button 1

4 Start Panel 1 Optional

5 Car key hole cover 1 Work with start panel Optional

6 PKE antenna 2 Front and rear PKE antenna

7 GSM antenna 1

8 GPS antenna 1

9 Siren 1

10 Shock sensor 1

11 Alarm LED indicator 1

12 Bypass module 1 Necessary for some cars Optional

13 Wires 1

22

� Specification:

Working Voltage 9-15V DCGSM

Frequency

GSM850MHz、EGSM900MHz、DCS1800MHz、

PCS1900MHz

Standby current < 30mA GSM antenna External

Output

Siren (Continue) 5A

GSM RF

Power

< 2W (GSM850 and EGSM900 band)

Turn light (Continue) 10A

< 1W (DCS1800 and PCS1900 band)Locking system 10A

Remote frequency 315MHz

Remote battery CR2032 button cell GPS antenna External

Remote standby < 10uA GPS precision 10-10 meters

Warranty

This system has been tested before sold. We strongly recommend you to get this system installed by

professional. There is a one-year warranty except the following condition:

1. Installed, fixed, or changed by personally or unprofessional.

2. Warranty will eliminate if the ownership of the tracker has been changed.

3. Parts damaged by man-made.

4. siren, adapter , wires , etc.

Warning: this device is just an auxiliary product that enhanced car security & alarm and driving car freely, itcan not replace assurance, we have not any responsibility if you have damage or lost in using this system.

User Name Telephone: System Telephone:

Purchase Date Year Month date System S/N or ID:

Address:

Model: CC-688 □ CC-688P □ CC-688G □ CC-688MS □

Distributor:

Notes: The explanation of this manual is belonged to our company, some small changes may not notice

customer, if you have any problems please contact us, thanks!