PUBLIC AUCTION

1146 N Central Avenue #535Glendale, California 91202

Phone:818-763-2021

Fax: 818-291-9495WWW.AAGAUCTION.COM

Auction Date: THURSDAY FEBRUARY 18, 2021 @ 11:00 a.m. PST

AUCTION LOCATIONS: 7281 GARDEN GROVE BLVD, UNIT E, GARDEN GROVE. CA

AEROSPACE LARGE CAPACITY CNC MACHINING FACILITY

Preview : Mornings of sale from 8:00am to 11:00 a.m.

“On-line bidding thru bidspotter.com”.

COVID-19 REGULATION AND REQUIREMENTS:1) DO NOT VISIT AUCTION SITE IF YOU HAVE FEVER, SHORTNESS OF BREATH, COUGH, NASAL CONGESTIONS, RUNNY NOSE, SORE THROAT, NASUEA,VOMITING AND / OR DIARRHEA.2) ALL VISITORS, CUSTOMERS, MACHINERY MOVERS, TRUCKERS, SUB CONTRACTORS MUST WEAR A MASK BEFORE ENTERING AUCTION FACILITY.3) ALL VISITORS MUST FOLLOW SOCIAL DISTANCING OF 2 METRES (6 FT-6 IN) WHEN VISITING AUCTION FACILITY. ONE GROUP AT A TIME WILL BE ALLOWED IN THE FACILITY FOR PREVIEW AND PICK UP.

First-Class MailPRESORTED

U.S. PostagePAID

STA CLARITA, CAPermit No. 298

CNC

MAC

ININ

G &

TURN

ING

2007

CNC MACHINING & TURNING

2007 MAG Fadal VMC3016HT CNC VMC w/ MultiProcessor Controls, 21-ATC, CAT-40, 10K RPM,Metric Ball Screws, Rigid Tapping

Mori Seiki MH-63 2-Pallet 4-Axis CNC HMC w/ Fanuc MF-M6 Controls, 60-ATC, CAT-50, 4 th Axis @ 1 Deg, 6,000 RPM

Dec/99 SV-500/50 CNC VMC w/ MSC-501 Con-trols, 30-ATC, CAT-50, Thru Spindle Coolant

2007

2007 Gardner Denver Air Compressor System

MUST SEE

FADAL & MORI SEIKI CNC MILLING

CNC Mills :2007 (Remanufactured) MAG Fadal VMC4020HT CNC Vertical Machining Center s/n R2007100131 w/Fadal MultiProcessor CNC Controls, 21-Station ATC, CAT-40 Taper Spindle, 10,000 RPM, 8meg Memory Expansion, Rigid Tapping, Graphics, T-820 Transformer, Coolant.2007 (Remanufactured) MAG Fadal VMC3016HT CNC Vertical Machining Center s/n R10079603168 w/Fadal MultiProcessor CNC Controls, 21-Station ATC, CAT-40 Taper Spindle, 10,000 RPM, Metric Ball Screws, 4meg Memory Expansion, Rigid Tapping, High Speed CPU, Graphics, T-820 Transformer, Coolant.Mori Seiki MH-63 2-Pallet 4-Axis CNC Horizontal Machining Center s/n 503 w/ Fanuc MF-M6 Controls, 60-Station ATC, CAT-50 Taper Spindle, 4 th Axis Thru Pallet @ 1 Deg, 6,000 RPM, (2) 24 ¾” x 24 ¾” Pallets, Oilmatic Oil Cooler, Chip Augers, Turbo Chip Conveyor, High Flow Coolant.Dec/99 Mori Seiki SV-500/50 CNC Vertical Machining Center s/n 2176 w/ Mori Seiki MSC-501 Controls, 30-Station ATC, CAT-50 Taper Spindle, Thru Spindle Coolant, 19 ½” x 37 ½” Pallet Table, (Pallet StyleMachine – No Pallet Changer), Oil Cooler, (2) Chip Conveyors, Coolant.Comet VMC-2000G Bridge Style CNC Vertical Machining Center s/n 951415 w/ Mitsubishi Meldas Controls, 30-Station ATC, CAT-50 Taper Spindle, Travels X= 78.25”, Y= 47.24”, Z= 27”, Habor Oil Cooler,Chip Augers, Chip Conveyor, 48” x 83” Table, Coolant.1993 Fadal VMC4020 4-Axis CNC Vertical Machining Center s/n 9300087 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, 20” x 48” Table, Coolant.Mori Seiki MV-80A CNC Vertical Machining Center s/n 267 w/ Fanuc Sys-tem 11M Controls, Hand Wheel, 0-Station ATC, CAT-50 Taper Spindle, 31 ½” x 74” Table, Chip Conveyor, Coolant.1992 Mighty Comet VMC1250G CNC Vertical Machining Center s/n 3551141 w/ Mitsubishi Meldas Controls, 20-Station ATC, CAT-50 Taper Spindle, Habor Oil Cooler, 29 ½” x 63” Table, Coolant.

CNC Lathe :Okuma LB15 II CNC Turning Center s/n 0711.2451 w/ Okuma OSP7000L Controls, 12-Station Turret,Hydraulic Tailstock, Parts Catcher, 10” 3-Jaw Power Chuck, Turbo Chip Conveyor, Coolant.

1993 Fadal VMC4020 4-Axis CNC VMC w/ CNC88HS Controls, 21-ATC, CAT-40

2007

2007 MAG Fadal VMC3016HT CNC VMC w/ MultiProcessor Controls, 21-ATC, CAT-40, 10K RPM,Metric Ball Screws, Rigid Tapping

2007 MAG Fadal VMC3016HT CNC VMC w/ MultiProcessor Controls, 21-ATC, CAT-40, 10K RPM,Metric Ball Screws, Rigid Tapping

2 AVAILABLE

Okuma LB15 II CNC Turning Center w/ OSP7000L Controls, 12-Station Turret, Tailstock, Parts Catcher

Partial View of Machine Tooling

MORI SEKI CNC AND SUPPORT

Support Machinery :Mori Seiki MS-850 17” x 36” Geared Head Gap Bed Lathe s/n 7171 w/ 32-1800 RPM, Inch Threading,Tailstock, Steady and Follow Rests, KDK Tool Post, 9” 3-Jaw Chuck, 12” 4-Jaw Chuck, Coolant.Comet 3KVHD Vertical Mill s/n 930113 w/ Sony Magnascale LH11 Programmable DRO, 60-4200 Dial Change RPM, Chrome Box Ways, Power Feed, 10” x 50” Table.Speeder HBS916A 9” Horizontal Band Saw s/n 120898 w/ Manual Clamping, Coolant, Rolling Base.Grob 4V-24 24” Vertical Band Saw s/n 1747 w/ Blade Welder,24” x 28” Table, Fence System.2007 Gardner Denver Intrgra EFB99F 10Hp Rotary Vane Air Compressor s/n S191909 w/ Quincy efrigerated Air Dryer, 120 Gallon Vertical Air Storage Tank.Gast Vacuum Pump w/ Tank.K.O. Lee 6” x 12” Surface Grinder e/ Magnalock Electromagnetic Chuck.Powermatic 2-Head Gang Drill Press w/ 19 ½” x 65” Table.Central Machinery Pedestal Grinder.Delta and Jet Bench Grinders.

Tooling :Fadal 4 th Axis 9” Rotary Head.(2) 13 ½” x 13 ½” x 21” Pallet Tombstone w/ 19 ½” x 19 ½” Base.(80) CAT-50 Taper Tooling.(60) CAT-40 Taper Tooling.Huot 50-Taper Tooling Cart.(7) 6” Angle-Lock Vises.(4) Equipto 10-Drawer Tooling Cabinets.(3) Lista 5-Drawer Maple-Top Tooling Cabinets.Lista 4-Drawer Maple Top Tooling Cabinet.(3) Huot Drill Cabinets.Insert Mill, Drill, Turn and Boring Tooling w/ Carbide Inserts, Carbide and HS Endmills, Drills, Taps,Reamers and Perishable Tooling.

2007

1992 Mighty Comet VMC1250G CNC VMC w/ Mitsubishi Controls, 20-ATC, CAT-50

Comet VMC-2000G Bridge Style CNC VMC w/ Mitsubishi Controls, 30-ATC, CAT-50

Mori Seiki MV-80A CNC VMC w/ Fanuc 11M Controls, 40-ATC, CAT-50

Equipto Tooling Cabinets

ALL TERMS AND CONDITIONS BEHIND THE BIDDERS CARD SUPPLIED WILL APPLY TO ALL AUCTION SALE ITEMS AND FOR ALL PRIVATE NEGOTIATIONS. BY PARTICIPATING AND BIDDING AT AUCTION YOU ARE LEGALLY BINDING A CONTRACT WITH THE AUCTION COMPANY.

ALL INVOICES MUST BE PAID WITHIN 24 HOURS FROM AUCTION DATE. IT IS PROHIBITED TO BID ON ANY ITEM THAT CANNOT BE PAID IN FULL WITHIN 24 HOURS FROM AUCTION DATE. PAYMENTS MUST BE CASHIERS CHECK, WIRE TRANSFER, OR LETTER OF GUARANTEE FROM BANK. ALL ITEMS MUST BE REMOVED BY FEBRUARY 26, 2021, 3:00 PM (PST) NO LOADING OR PICK UP ON SATURDAY AND SUNDAY.NO LOADING BY AUCTIONEER OR SELLER.BUYERS PREMIUM WILL BE 15% AND 18% FOR ALL ONLINE BIDDING ON BIDSPOTTER.COM.AUCTIONEER IS NOT RESPONSIBLE FOR MIS IDENTIFICATION OF ANY EQUIPMENT OR ASSETS BEING SOLD AT AUCTION EITHER BY VERBAL OR WRITTEN. IT IS THE BUYER’S RESPONSIBILTY TO INSPECT THE GOODS AND ASCERTAIN IF THE SPECIFICATIONS, DESCRIPTIONS AND CONDITION OF THE GOODS CONFORM TO THE BUYER’S REQUIREMENT INCLUDING SERIAL NUMBERS.

BUYER ACKNOWLEDGES THAT THE EQUIPMENT OR ITEMS PURCHASED ONCE MAY HAVE CONTAINED, EXPOSED TO , AND OR UTILIZED HAZARDOUS MATERIAL. THERE MAY BE SURFACES ON ITEMS WHERE DECONTAMINATION CANNOT BE VALIDATED: AS SUCH, THE BUYER OR BIDDER ACKNOWLEDGING THAT THEY ARE ACCEPTING THIS EQUIPMENT OR ITEMS IN AN “AS IS” CONDITION.

BUYER AND THEIR ASSOCIATES WILL HOLD AUCTIONEER AND ‘THE SELLER’’ HARMLESS AGAINST ANY AND ALL CLAIMS AND ACTIONS ARISING OUT OF THE PARTICIPATION OF THE INDEMNITEE IN THE ACTIVITY, INCUDING, WITHOUT LIMITATION, EXPENSES, JUDGEMENTS, FINES, SETTLEMENTS AND OTHER AMOUNTS INCURRED IN CONNECTION WITH ANY LIABLITY, SUIT, ACTION, LOSS, OR DAMAGE ARISING OR RESULTING FROM THE INDEMNITEE’S PARTICIPATION IN THE AUCTION.ALL BIDDERS MUST ONLY USE APPROVED MACHINERY MOVERS BY SELLER WITH LIABILITY INSURANCE OF $2,000,000 OR HIGHER. NO ITEMS SHALL BE REMOVED UNLESS PAID IN FULL AND ALL ITEMS SHALL BE REMOVED IN THE TIME ALLOCATED BY THE AUCTIONEER. ALL SALES ARE FINAL, AND ALL ITEMS ARE SOLD AS IS WHERE IS, WITH ALL FAULTS AND DEFECTS.THERE ARE NO GUARANTEE OR WARRANTY TO ANY ITEMS SOLD (RE: MAKE, MODEL, YEAR, HOURS, MILES, OR MERCHANTABLITY BY AUCTIONEER OR SELLER).BUYERS RESPONSIBILITY TO INSURE PROPER USE FOR SAFETY.ALL ITEMS ARE SOLD AS “PARTS ONLY”BUYER ACKNOWLEDGES THAT THE GOODS ARE PRE-OWNED AND GOODS WERE EITHER DESIGNED NOR MANUFACTURED BY SELLER. SELLER HAS NO KNOWLEDGE OF OR CONTROL OVER THE PRIOR USE OR MISUSE OF THE GOODS OR ANY MODIFICATIONS TO THE GOODS FOLLOWING ORIGINAL MANUFACTURE. NEITHER DOES SELLER HAVE KNOWLEDGE OR CONTROL OVER THE APPLICATION OF THE GOODS BY BUYER. IT IS THE BUYER’S SOLE RESPONSIBILITY TO PROVIDE PROPER SAFETY DEVICES, EQUIPMENT AND INSTRUCTIONS FOR ANY PARTICULAR USE OR TAKE NECCESSARY STEPS TO CONFORM THE GOODS AND OPERATION THEREOF TO ALL FEDERAL, STATE OR LOCAL GOVERNMENT SAFETY STANDARDS AND LAWS INCLUDING WITHOUT LIMITATION THE OCCUPATIONAL SAFETY AND HEALTH ACT OF “OSHA”. ANNOUNCEMENTS MADE BY THE AUCTIONEER ON THE DAY OF THE AUCTION TAKE PRECEDENCE OVER ANY PREVIOUS PRINTED MATERIAL PERTAINING TO THIS AUCTION. AUCTIONEER RESERVES THE RIGHT TO REMOVE OR ADD TO ANY AUCTION ITEMS ON THE LIST UNTIL AUCTION TIME.

PARTIAL & ABBREVIATED TERMS AND CONDITIONS OF AUCTION

LIVE WEBCAST ONLINE ONLY • NO ONSITE BIDDING THURSDAY FEBRUARY 18, 2021 @ 11.00 a.m.

ALL MACHINERY MOVERS MUST BE APPROVED BY THE SELLER PRIOR TO REMOVAL OF EQUIPMENTTERMS AND CONDITIONS

ALL ITEMS ARE SOLD AS-IS / WHERE - IS NO GUARANTEES, OR WARRANTIES ARE APPLIED

ALL ITEMS MUST BE PICKED UP BY SPECIFIED DATE

TERMS OF SALE: CASH OR CASHIERS CHECK ONLY. 18% BUYERS PREMIUM ON ALL PURCHASES.$200.00 REFUNDABLE CASH DEPOSIT. 25% CASH DEPOSIT TOWARDS ALL PURCHASES. ALL SALES ARE SUBJECT TO CALIFORNIA SALES TAX. THERE WILL BE NO EXCEPTIONS.

BID LIVE OR VIA WEBCAST

BID ON BIDSPOTTER.COM

PUBLIC AUCTIONInspection :Faro Portable CMM Arm w/ Mitutoyo 50” x 80” x 12” Granite Surface Plate.Mitutoyo 24” Digital Height Gage.Mitutoyo 2”-6” and .7”-1.4” Dial Bore Gages.Mitutoyo and SPI Bore Mic Sets .800”-2.000”, .500”-.800” and .275”-.500”.Starrett Gage Block Set.Starrett 6” Master Level.Fowler Digital Caliper Gage.Intertest Dial Caliper Gage.Import 1”-2” Thread Pitch Mic.Mitutoyo 0-6” Depth Mic.SPI 0-6” Dial Depth Gage.Starrett 6” Dial Caliper.Pin Gage Sets .061”-1.000”.Thread Ring and Plug Gages.

Material Handling :Hyster E50XL-33 4800 Lb Cap Electric Forklift s/n C108V21418R w/ 3-Stage Mast, 189” Lift Height, SideShift, Cushion Tires, Charger.Flammables Storage Cabinet.

Hyster E50XL-33 4800 LbElectric Forklift w/ Charger

Mori Seiki MS-850 17” x 36” Geared Head Gap Bed Lathe w/ 1800 RPM, Inch Threading, Tailstock

Hyster E50XL-33 4800 Lb Electric Forklift w/ Charger

Grob 4V-24 24” Vertical Band Saw