PUBLIC AUCTION - Biditup · 2016. 11. 30. · DC motor, (3) side stands TURKSHEADS, double sided, detwisting endcoder ALPHA CUTOFF: Model SR-10-30 S# 78-528 rated cap.: 2.5" OD x

PUBLIC AUCTION

®

HEDSTROM CORPORATIONIn Conjunction With

AUCTION: Wednesday, March 30 & Thursday, March 31, 2005 • 9:30 A.M. Start Time Each Day

550 Sunnyside Road, Bedford, Pennsylvania

“Let Our Experience Be Your #1 Asset”™

2 DAY SALE!

View of T & H W20-H-10 tube mill

GRAHAM ENGINEERING 160 ton twin head blow molder

1996

HPM 2200 ton hydraulic injection mold machine

20011989

STAMTEC 176 ton C frame press

1999

3 AVAILABLE

OVER3,000LOTS

22 DAY SALE

View of LITTELL 40-12 Uncoiler & LEE SHAFER buttwelder (line 1)

View of T & H 7 stand tube mill (line 1)

View of T & H 3 stand sizing mill w/ALPHA flying cutoff &payoff table (line 1)

View of KENT “FLOOP” accumulator w/T & H 7 stand tube mill dust collect controls, etc. (line 1)

21 ⁄2 " ODTUBE MILLS (Day 2)

1989 TUREK & HELLER W20H-10 tubemill, LINE SPECIFICATIONS: rated cap.:21⁄2" OD x .083" wall speeds: 300 fpmuniversal drive line, direction: left toright (line 1)

C/O LITTELL automatic centering payoffreel double end Model 40-12, Serial #1109-89 air drag brake, LEE SHAFER shearend splicer/welder w/MILLER welder, KENT“FLOOP” vertical accumulator ModelTH/HED 3 9047 RB rated cap.: .035" to .120"material thickness, hydraulic drive, T & HW20H-10 tube mill

FORMING SECTION: entry guide (4) formingstands, 2" dia. shafts; 25 HP, DC motor (3)fin stands, (6) side passes

WELD SECTION: 3 roll weld box, 2 ScarfingTHERMATOOL VT150 oscillator;150 KW welder

3

This brochure is only a partial listing VISIT OUR WEBSITE FOR MORE DETAILED LISTINGS AND PHOTOS www.corpassets.com

View of LITTELL 40-12 uncoiler with LEE SHAFERbutt/splice welder (line 2)

View of T & H 7 stand tube mill (line 2)

View of T & H W20-H-10 tube mill line (line 2)

TUBE MILLS, cont. (Day 2)

LINE 1, cont.

COOLING SECTION: heat exchanger

SIZING SECTION: (3) vertical stands, 2" dia. shaft, 25 HPDC motor, (3) side stands TURKSHEADS, double sided,detwisting endcoder

ALPHA CUTOFF: Model SR-10-30 S# 78-528 rated cap.:2.5" OD x .083" wall, 300 fpm Elec Servo motor acceleratorTALLYRAND length control, RELIANCE controls

1989 TUREK & HELLER W20H-10 tube mill, LINESPECIFICATIONS: rated cap.: 21⁄ 2" OD x 083", wall,speeds: 300 fpm universal drive line, direction: leftto right (line 2)

C/O LITTELL automatic centering payoff reel doubleend Model 40-12, Serial # 9178-79 w/air drag brake,LEE SHAFER shear end splicer/welder w/MILLER welder,KENT “FLOOP” vertical accumulator Model TH/HED 1,rated cap.: .035" to .120" material thickness, hydraulicdrive, T & H W20H-10 tube mill

FORMING SECTION: entry guide (4) forming stands,2" dia shafts; 25 HP, DC motor (3) fin stands, (6) side passes

WELD SECTION: 3 roll weld box, 2 ScarfingTHERMATOOL 150 KW welder, MECO spray metalizer,MACROTEC vapor exhaust


SIZING SECTION: (3) vertical stands, 2" dia. shaft, 25 HPDC motor, (3) side stands TURKSHEADS, double sided,detwisting endcoder

ALPHA CUTOFF: Model SR-10-2-55, S# 91, rated cap.:2.5" OD x .125" wall, speeds: 250 fpm, Elec Servo motoraccelerator, TALLYRAND length control, CUTLERHAMMER “RESPONDER” controls

View of T & H 3 stand sizing mill (line 2)

21⁄2 " OD

PROXY BIDDINGIf you are unable to attend this auction,

we would be pleased to act as your proxy.Please contact our office at (416) 962-9600

or visit our website for a proxy bidform, terms and additional information.

42 DAY SALE

View of T & H W20-H-10 tube mill line (line 3)

T & H W20H-10 7 stand tube mill (line 3) HAVEN 873 tube recut machine w/PINES bundle loader

View of dedimplers

2000

21 ⁄2 " OD

21 ⁄2 " OD

ALPHA SR-10-30 flying cut off (line 3)

View of tube mill dies

2" SHAFT DIA

(32 SETS) AVAILABLE

TUBE MILLS, cont. (Day 2)

TUREK & HELLER W20H-10 tube mill, LINE SPECIFICATIONS:rated cap.: 21⁄ 2" OD x .083" wall, speeds: 300 fpm universal driveline, direction: left to right (line 3)

C/O LITTELL automatic centering payoff reel double end Model40-12, Serial # 9179-79, w/air drag brake, LEE SHAFER shear endsplicer/welder w/MILLER welder, KENT “FLOOP” verticalaccumulator Model TH/HED 2 rated cap.: .035" to .120" materialthickness, hydraulic drive, T & H W20H-10 tube mill

FORMING SECTION: entry guide, (4) forming stands, 2" dia shafts;25 HP, AC vari speed motor (3) fin stands, (6) side passes

WELD SECTION: 3 roll weld box 2 Scarfing THERMATOOL VT100oscillator, 100 KW welder, MECO spray metalizer MACROTECvapor exhaust


SIZING SECTION: (3) vertical stands, 2" dia. shaft, 25 HP AC varispeed motor, (3) side stands TURKSHEADS, double sided,detwisting endcoder

ALPHA CUTOFF: Model SR-10-2-55, S# 90, rated cap.: 2.5" OD x.125" wall, speeds: 300 fpm Elec Servo motor accelerator,TALLYRAND length control, SIEMENS controls

HAVEN 873 tube re-cut machine, s/n 5870, with ALLEN BRADLEYpanelview 550 control, 72" max. cut length, 5⁄ 8"-23⁄ 16" tooling,PINES bundle loader (s/n 98500-66011)

(3) HEDSTROM 68" max. dedimplers

APPROXIMATELY 32 SETS OF TUBE MILL DIES

View of KENT TH/HED3 9047RB floop accumulator (line 3)

5


GRAHAM ENGINEERING 22 DL 160 ton twin head blow molder

GRAHAM ENGINEERING 22DL 160 ton twin head blow molder

1996

GRAHAM ENGINEERING 160 ton twin head blow molder

1996

View of twin head &control for 160 tonblow molder

22 LB. SHOT

GRAHAM ENGINEERING GEO10DP74X40 95 ton twin headblow molder

19982 AVAILABLE

BLOW MOLDING (Day 1)

(3) 1996 GRAHAM GEC-22DLhydraulic accumulator twin headblow molders, s/n 49700, 49670,49640, with BARBER COLEMAN ELcontrols, w/160 ton cap., (2)heads, 22 lb. shot size, 5" - 18"tooling, 74" x 84" platen, 66" max.daylight, 16" min. daylight,160 ton, 41⁄2" extruder size,1300 lbs. per hour, 200 HP, partsremovable system

AUCTIONCONDUCTED

BY CORPORATEASSETS INC.

For further informationcontact us at:

2 St. Clair Ave. W., Suite 1002,

Toronto, Ontario,Canada M4V 1L5

Tel: (416) 962-9600Fax: (416) 962-9601

Email: [email protected]: www.corpassets.com

Toronto–Chicago

62 DAY SALE

View of NELMOR & CUMBERLAND granulators

Partial view of blow molds (NOTE: MAYBE OFFERED WITH PRODUCT LINES)

BLOW MOLDING, cont. (Day 1)

(2) 1998 GRAHAM GEC-10DP7440 hydraulicaccumulator twin head type blow molders,s/n 77750-98, 77350-97, with BARBERCOLEMAN EL controls, w/95 ton cap. (2)heads, 10 lb. shot size, 2"-12" tooling, 40" x74" platen, 59.5" max. daylight, 10.5" min.daylight, 95 ton, 3.5" extruder size, 720 lbs.per hour, 125 HP, parts removal system

(4) NELMOR G1634 twin 30 HP granulators,s/n 97D00334, 960237476, 960237475,960237474, with 4 bag dust collector

(2) NELMOR N1634 40 HP granulators,s/n 97G00640, 98F01703

A.E.C. NECW-2-100 ton twin chiller,s/n 95M0325

(3) CUSTOM miscellaneous, gas fired flamemold trimmers

(5) CONAIR (3) BA7101, (2) GB44X, (4) headGRAVIMETRIC batch blenders

(2) CUSTOM 15' dia. 42' x 200,000 lb. silos

(3) CONAIR vacuum pumps (2) 15 HP, (1)71⁄2 HP

(3) LR SYSTEMS surge bins

(3) CONAIR vacuum pumps, (2) 15 HP, (1)71⁄2 HP

(2) CONAIR filter units, with dust canisters

View of CONAIR blender/feeder,w/Gaylord tipper

AEC 100 ton chilling unit

PROXY BIDDINGIf you are unable to attend thisauction, we would be pleased toact as your proxy. Please contactour office at (416) 962-9600 or

visit our website for a proxy bidform, terms and additional

information.

7


View of silos

HPM MLH 2200 ton injection mold machine

TOSHIBA ISF1959DS11 1950 ton injection mold machine

HPM 1000 MKII 1000 ton injection mold machine

1995

1989

2001400 0Z SHOT

1999 5 AXIS ROBOT

2 AVAILABLE

INJECTION MOLDING (Day 1)

2001 HPM MLH-2200-WP-400 hydraulic horizontalinjection molder, s/n 228, with command 9000control, 2200 ton cap. 400 oz. shot size, 66" clampstroke, 138" max. daylight, 91" x 103" platen, 63" x63" tie bar clearance, 11" tie bar die, 6" screw dia.,26.125" injection stroke, 300 HP, (4) heat zones,88.4 KW barrel heating cap.

1995 TOSHIBA ISF1950DSII hydraulic horizontalinjection molder, s/n 501302, with 1950 ton cap.,384 oz. shot size, 66.9" clamp stroke, 126" max.daylight, 84.6" x 96.5" platen, 70.3" x 70.3: tie barclearance DAL MACHIO 5 axis parts robot w/DALMACHIO control

(2) 1989 HPM 1000MKII160 hydraulic horizontalinjection molder, s/n 89208, 86208, with MOLD-RITE 2100 controls, 1000 ton cap. 160 oz. shotsize, 55" clamp stroke 85" max. daylight, 65" x65" platen, 45" x 45" tie bar clearance 7" dia. tiebars, 4.5" screen dia.

View of platen & CNCcontrol for HPM 1000

82 DAY SALE

INJECTION MOLDING, cont. (Day 1)

1993 TOSHIBA ISF610SII-59b hydraulic horizontal injectionmolder, s/n 313603511-59B, with 606 ton cap. 124 oz. shotsize, 47.2" clamp stroke, 63" max. daylight, 48.4" x 48.4"platen, 33.8" x 33.8" tie bar clearance, 4.13" screw dia. 44 KWbarrel heating cap. 60 HP

2001 HPM T450-1330-C-70MM hydraulic horizontal toggle typeinjection molder, s/n 14737, with 450 ton cap. 25.4 oz. shotsize, 28.35" clamp stroke, 59.84" max. daylight, 42.13" x 42.13"platen, 29.13" x 29.13" tie bar clearance, 10.39" injection stroke,60 HP 25 KW barrel heating cap., command 4000 control

2001 HPM MLH-440-EP-120 hydraulic horizontal injectionmolder, s/n 00241, with HPM command 4500 control, 440 toncap., 120 oz. shot size, 36" clamp stroke, 61" max. daylight,43" x 43" platen, 30" x 30" tie bar clearance, 5" tie bar dia.12.6" injector stroke, 3" screw dia., 38.3 KW barrel heating cap.

HPM T335-1330-A-60MM hydraulic horizontal toggle typeinjection molder, s/n 12738, with BARBER COLEMAN control,335 ton cap., 18.7 oz. Shot size, 26.7" clamp stroke, 56.2"max. daylight, 37.9" x 37.9" platen, 25" x 25" tie bar clearance,9.5" injector stroke, 50 HP, 20 KW barrel heating cap.

THERMAL CARE TXW chiller, with ALLEN BRADLEY panelview 600 control, THERMAL CARE PT4500 cooling tower

(5) CONAIR blenders, (3) BA7101, (2) GB44X, 4 headGRAVIMETRIC batch blenders

(3) CUSTOM 15' x 42' 200,000 lb. cap. silos

CUMBERLAND 16" x 20" 25 HP granulator, s/n 83200 - 98546

ALSO: (4) AQUATHERM RA SERIES thermal controllers; (2)CONAIR PD15 15 HP, vacuum pumps; (2) CONAIR filter units,with dust canisters; (12) DME SMART SERIES modules; (2)DYNISCO hot runners; ENSIGN 60 CF hopper, with 6 dustcollector bags; (3) L.R. SYSTEMS surge bins; NELMOR G163430 HP granulator, s/n 83200-98546; (4) TRUEMOLD MC75Wthermal controllers

HPM T450 1330 C 70MM 450 ton toggle injection mold machine

HPM MLH 440.EP.120 400 ton injection mold machine

HPM T335 1330 A 60 MM 335 ton toggle injection mold machine

THERMAL CARE PT 4500 chiller

Partial view of injection mold diesTOSHIBA ISF61052 59B 610 ton injection mold machine

1993

2000

2000

2001

THERMAL CAREEXW chilling tower

9


View of ME zone controllers & thermolators

FERRY ROTOSPEED RS4-280-HD-E rotational molder View of ROTOMOLD dies

View of ROTOSPEED RS4-280-HD-E rotational molder

View of ROTOMOLD dies

REDUCTION ENG. 400pulverizer vacuum,w/pump & loader

1999

1995

View of silos

ROTATIONAL MOLDING (Day 1)

1995 FERRY RS4-280HD rotational molder, s/n 7812, with G.E. FANUC CNC control, 5 position, 4 arm, 4 cart independent, max. arm speed 8RPM, max. plate speed 12 RPM, 6,000 lb. max. arm load, max. mold dia. 114", 800 F max. furnace 5,000,000 btu’s w/CYCLOMAX size 5 burner,(2) cooling stations, (2) load/unload stations

1998 REDUCTION ENGINEERING 400 pulverizer, with 75 and 30 HP motors

1998 CONAIR DL20 vacuum loader system, with 1400 lbs. per hour, BROWER 1234V blender

CUSTOM 10,000 lb. day bin silo for pulverized plastic

CUSTOM 80,000 lb. silo

7 AVAILABLE

UP TO 200,000 LB. CAP.

PRODUCT LINES (ALL SOLD

SPRING FORMING/PACKAGING LINE(Day 2)

(2) 2000 WAFIOS AS-41 spring coiler, s/n 2-2130-081,2-2130-082

(2) 1999 WAFIOS FOA-41 spring looper, s/n 2-2130-067,2-2310-066

2002 JMAN M900/580 packaging machine, s/n 2889,with JMAN digital control

JMAN motorized inclined conveyor, s/n A20618

2002 ITALFI IPK40/20 heat tunnel, s/n 1426, with17" x 9" opening

LEWCO 12" x 35' motorized belt conveyor

LEWCO 12" x 11' motorized inclined conveyor

LEWCO 103⁄4" wide x 10' long motorized belt conveyor,with (4) cooling fans

LEWCO 12" wide x 28' long motorized belt conveyor

MISCELLANEOUS large quantity of wire spools andspool holders

WAFIOS AS41/FOA41 springforming machine

View of complete WAFIOS springmanufacturing & packaging line

IMAN PACK auto spring packaging line

View of steel wire inventory

20022000

2 AVAILABLE

PLEASE NOTE: all machinery and equipment used in the manufacturing of all product lines shall be identified and offered up for sale after the product lines have been sold

COMPLETE TURNKEY MANUFACTURING LINES INCLUDING NAMES, LICENSES, PATENTS,

10

OUTDOOR METAL GYMSmiscellaneous, consisting of molds,dies, W.I.P., IT product including names,drawings etc. ELLINGWOOD, MCKINLEY,RAINIER, EQUINOX II, SCOTTSDALE,ASHFORD, CASCADE, HERITAGE,MARINER, LEGEND, for MY FIRST SWINGSET, TEETER TWIRL, CUDDLE BEAR BABYSWING, all accessories includingcontourglide ride seats, sling swingand chain, hard swings, comfort swings,contour swing chairs, whirly twirl, ringswing, bump-n-glide, rocket rider, starcruiser, lawn swings, teeter totter, alsoclimbing handles, chain trapeze, gymrings, steering wheel, auger anchors,telescope, fireman’s pole, canopies,rope ladder, kids climbing net, overheadclimber kit, 5', 5 1⁄ 2', 6', 8' plastic slides,etc... also complete wood compatiblegym sets (no wood)

D SUBJECT TO PRIOR SALE)

View of production cell

View of W.I.P. Overall view of metal swing setline/tube piercing machines

View of production cell

View of blow mold dies& product

TRAMPOLINE production cell

FERRY ROTOSPEED RS4-280-HD-Erotational molder

View of ROTOMOLD dies

DAVIS 35Textruder, w/Vitekchain accumulator

VITEK payoff reel,w/accumulator

Chain cut to length line

Overall view of trampoline manufacturing line

Overall view of chain manufacturing & cut tolength line

CONSISTING OF MOLDS, DIES, WORK IN PROGRESSDRAWINGS AND ALL OTHER INTELLECTUAL PROPERTY

11

CHAIN EXTRUSION LINE(Day 2)

VITECK TDV-300-4 accumulator,s/n 9506-160

HEDSTROM chain tensioner

DAVIS 35T extruder, s/n E1761, withDUSTBEATER vacuum loader

VITECK cooling trough

VITECK chain spooler

VITECK TDV800-120 accumulator,s/n 9506-171

(3) ACC-TURN auto chain cutter, withpayoff reels

VITECK control panel

SPRING HORSES consisting of, molds, dies, W.I.P., internalproperty including names, drawings, etc... for starlights,moonlights, cinnamon, shadow horse, prancing pony, growwith me pony, etc.

FACTOR X consisting of, blue ice bike and snowboardingextreme sports accessories, including all molds, dies, W.I.P.internal property including names, drawings etc... for theproduction of launch ramps, fly boxes, grind rails, quarter pipes,grind spines, pyramids, trik stik, kink rails.

TRAMPOLINE consisting of, all jigs, W.I.P., internal propertyincluding names, drawings, etc... for all 8', 12', 13', and 14' dia.trampolines.

HUNTING TREE STANDS miscellaneous, including all molds,dies, W.I.P. internal property, including names, drawings, etc.

CUSTOM metal shovel shafts, canoe stabilizers (pontoons),game tables, fence posts, etc.

122 DAY SALE

STAMPING (Day 2)

1999 STAMTEC G2-160 straight side double crank press, s/n 370621, with 160 ton cap. 7.88"stroke, 30-55 SPM, 3.9" RAM adjustment, 78.8" x 29.9" bed

BLISS SC2-150-60X36 straight side double crank press, s/n H67862, with 10" stroke, 23.5" shutheight, 8" RAM adj. 30-60 SPM

BLISS HP2-150-48-36 straight side double crank press, s/n H64555, with 150 ton cap., 48" x 36" bed

(4) BLISS C110 obi punch press, s/n H69869, H64465, H70000, H61162, with 110 ton cap., WINTRISSclutch/brake control, 8" stroke, 4" ram adj., 17" shut height 40 SPM, WINTRISS clutch/brake control

BROWN BOGGS 110 OBI punch press, s/n 86135, with 110 ton cap. 8" stroke, 14" shut height,3.5" RAM adj. 27" x 42" bed, 65 SPM, a/c, WINTRISS clutch/brake control, light curtain

FEDERAL F7 OBI punch press, s/n 7-620, with 80 ton cap., 10" stroke, 21.5" shut height, 3" RAMadj., 75 SPM, WINTRISS clutch/brake control, light curtain

BLISS 107 double crank OBI press, s/n H63148, with 75 ton cap. 10" stroke, 17" shut height, 2.5"RAM adj., WINTRISS clutch/brake control, light curtain

(7) BLISS C-60 OBI punch press, s/n H69305, H62733, H65055, H69884, H39921, H66159,H62383, with 60 ton cap. 6" stroke, 3" RAM adjustment, 14.25" shut height WINTRISSclutch/brake control, pedestal press control light curtain

BLISS 106-DC double crank OBI press, s/n H65584, with 60 ton cap., 6" stroke, 12" shut height,2.5" RAM adjustment,light curtain

BLISS 211⁄2B OBI punch press, s/n H44583, with 58 ton cap., 5" stroke, 16" shut height, 2.5" RAMadj., 90 SPM light curtain

BLISS 211⁄2 M OBI punch press, s/n H38944, with 58 ton cap., 5" stroke, 16" shut height,WINTRISS clutch/brake control, light curtain

(2) BLISS C-45 OBI punch press, s/n H67450, H64982, with 45 ton cap., 4" stroke, 12.25" shutheight, 3" ram adj., WINTRISS clutch/brake control, light curtain

BLISS 21S OBI punch press, s/n h459363, with 40 ton cap., 3" stroke, 11" shut height

(2) BLISS 21B OBI punch press, s/n H38147, n/a,

BLISS 191⁄2B OBI punch press, s/n H45932, with 30 ton cap., 4" stroke, 9.5" shut height

MINSTER horn press, s/n 10-4A-17565, with 32 ton cap., 6" stroke, 2.25" RAM adj., 100 SPM,WINTRISS clutch/brake control, light curtain

HYMAN horn press, with WINTRISS clutch/brake control, light curtain

CHICAGO 810-C mechanical press brake, s/n L12899, with 75 ton x 14' cap., 13" x 168" bed,102" between housings stroke, 4" RAM adjustment, light curtain

DUAL 80-8 mechanical press brake, s/n 293, with 80 ton x 10' cap., 3" stroke, 3.5" RAM adj.,15" x 120" bed, 101" between housings, WINTRISS clutch/brake control, light curtain

CHICAGO 36" hand brake, s/n 81382

(4) AMERICAN 1000, 10,000 lb. coil reel, s/n 5755, 1839, 3494, 2633

PERFECTO RS-10-24-M 10,000 lb. coil reel, s/n RS83035

COOPER WEYMOUTH 5000-18P coil reel, s/n 17600, with 5,000 lb. cap.

AMERICAN 30, 4,000 lb. coil reel, s/n 7105

PERFECTO 28-24-7 feeder/straightener, s/n S4-83034, with 24" cap.

COE CF325 feeder/straightener, s/n 8425-1, with 24" x 24" cap.

COE CF325 pneumatic feeder/straightener, s/n 5986-1, with 24" x 24" cap.

COE CF-250 pneumatic feeder, s/n 4549-1, with 6" x 24" cap.

ALSO COOPER WEYMOUTH 24" wide straightener, s/n w/1v247138C; CUSTOMfeeder/straightener, with 16" cap.; RAPID-AIR SC8-P coil reel/straightener, s/n 51461; COOPERWEYMOUTH 6" wide straightener, s/n V651562E; CUSTOM feeder straightener, with 16" cap.;DURANT straightener, s/n 253, with 2" dia. rolls x 101⁄2" wide; CUSTOM hydraulic H frame shoppress; DENISON 6 ton multi press; DENISON 5 ton hydraulic multipress

STAMTEC G2-160 C frame press

BLISS SC2-150-60-36 SS press

BLISS HP2-150-48-36 SS press

13


BROWN & BOGGS 110 ton OBI press View of BLISS C60 ton OBI punch press

PEARL 10000 lb. uncoiler

BLISS C60 60 ton OBI press

CHICAGO D&K 810 C press brake, w/(2) 2' horn ext.AMERICAN STEEL 1000 10,000 lb. uncoiler

PERFECTO RS-10-24-M 10,000 lb. uncoiler

BLISS C110 110 ton OBI punch press

COE CF 325 24 x 24 coil straightenerView of coil steel COE 325 24X24 coil straightener

7 AVAILABLE

7 AVAILABLE

2 AVAILABLE

APPROX. 500,000 LBS. AVAILABLE

4 AVAILABLE

142 DAY SALE

PINES 20T vertical tube bender

PINES 5T vertical tube bender

CRITERION auto adjustment tube bender

WEISBACH 10 stand roll former

BPR CPH-40 REV angle rolls

View of EAGLE C2000 swagers, w/tooling

SWEDGER wire straightener& cutoff machine

PINES Dial-A-Bend vertical tubebender, w/dies

PINES No.2 hydraulic tube bender

1991

2001

2 AVAILABLE

23 ⁄8" CAP.

ANGLE ROLLS / TUBE BENDERS(Day 2)

(2) 2001 BPR CPH-40-REV hydraulic verticalbending rolls, s/n 2001-A062, 2001-A061, withBPR EPN8 programmable control, 9 RPM, 6.3" rolldia., 3.7" max. roll opening

(2) 2000 BPR CPH-40-REV hydraulic verticalbending rolls, s/n 2000-N003, 2000-N002, withBPR EPN8 programmable control, 9 RPM, 6.3" rolldia., 3.7" max. roll opening

ROUNDO R2 vertical roll bender, s/n 945671,with 2" x 2" x 5⁄ 16" cap.

PINES 20T hydraulic vertical bender, s/n45200-60066, 45250-62319, with 7⁄ 8"-21⁄ 8" tooling

(4) PINES 5T hydraulic vertical bender, s/n44362-74316, 44362-92074, 44362-92076,44362-83085, with digital bend control,5⁄ 8"-11⁄ 4" tooling

PINES 3T hydraulic vertical bender, s/n 3T-137

(2) PINES M-14640 hydraulic horizontal bender,s/n 11235-92088, 11235-91131

CRITERION twin head hydraulic horizontalbender, with 33" lateral head travel

EAGLE C-2880 hydraulic horizontal swager,s/n 3968

EAGLE C-85 hydraulic horizontal swager,s/n 2749

EAGLE C hydraulic horizontal swager, s/n 1187

(13) HEDSTROM swaging, bending, punchingcomponent stations, tube piercing, with bulkload feeders

(10) HEDSTROM swaging, bending, punching,component stations, tube piercing, weldingstation with (8) MILLER XMT 304 300 AMP migwelders w/MILLER 70 series wire feeds

ALSO: internal and external swager dies

4 AVAILABLE

AUCTIONCONDUCTED BY

CORPORATE ASSETS INC.For further information

contact us at:2 St. Clair Ave. W.

Suite 1002, Toronto, Ontario,Canada M4V 1L5

Tel: (416) 962-9600Fax: (416) 962-9601


Toronto-Chicago

15


SANTEC RB50 CNC turret mill

LeBLOND 12" x 104" engine lathe 20" DoALL C916M horizontal bandsaw

View of BROWN & SHARPE1024 & 1236 MICROMASTERhydraulic surface grinders

MACHINE SHOP(Day 2)

(2) SANTEC RB-50 CNC ram typeturret mills, s/n 81011096, n/a,with 9" x 42" table, power travels,up to 4500 RPM, 3 HP

(2) BRIDGEPORT ram typeturret mills, s/n 12BR120672,12BR125437, with 9" x 42" powerfeed table, 2 axis DRO, 11⁄2 HP

BRIDGEPORT ram type turretmill, s/n BR259934, with 9" x 42"power feed table, 2 axis DRO, 2 HP

BRIDGEPORT ram type turret mill,s/n BR38/20, with 9" x 32" powerfeed table, 2 axis DRO

ROCKWELL RAM type verticalmill, with power feed table

HANSFORD 1020 die spottingpress, s/n 383, with 24" x 43" bed

LEBLOND 18" x 104" enginelathe, s/n 9E612, with 18" swing,104" centers, 2" spindle bore, upto 1000 RPM, 3, 4 jaw chucks,steady and follow rests

CINCINNATI HYDRASHIFT IRengine lathe, s/n 55024-73-4,with 19" swing, 72" centers, 2"spindle bore, up to 1470 RPM, 3and 4 jaw chucks, steady rests

ATLAS 10X34 bench type lathe,with 10" swing, 34" centers

SOUTHBEND 9" x 24" toolroomlathe, s/n 151464

DOALL 2013V vertical bandsaw, s/n500-961051, with 20" throat, bladewelder and grinder

SPEEDMASTER 3' ERT 36" x 10"radial arm drill, s/n 1822, with36" arm, 10" column, up to2100 RPM

(2) DOALL C916M horizontalbandsaw, s/n 489-92338, with20" x 10" cap. auto. clamp

DELTA 13" vertical bandsaw,with 13" throat, 10" work height

BROWN & SHARPE 1236MICROMASTER hydraulic surfacegrinder, s/n 523-1236-406, with12" x 36" electromagnetic chuck

BROWN & SHARPE 1024MICROMASTER hydraulic surfacegrinder, s/n 523-1024-291, 10" x 24"mag chuck

BROWN & SHARPE No. 5 handfeed surface grinder, s/n 1954,with 81⁄2" x 24" mag chuck

K.O. LEEB962 tool and cuttergrinder, s/n 22744PJ

CINCINNATI LITTLE SCOTSMENELECTROJET EDM,s/n 41021V79-0010

SOUTHBEND-INGERSOLL EDM

(2) FEDERAL P1-12A 100 KVAspot welder, s/n 11338, 10535,with INTERLOCK INDUSTRIES 108microprocessor control

(2) OTC DYNAMIC DR-4000 5axis welding robots, with OTCCPUAS350 350 amp powersupplies, MILLER wire feeds

HEDSTROM sub assembly

welding stations, with MILLER

mig welders up to 300 amp

WELDERS: (2) HOBART

HANDLER 135 90 amp mig

welder, s/n LA268029,

LA341438; MILLER CP-250TS

250 amp mig welder, with wire

feed, cables and gun; MILLER

300MT 300 amp mig welder, with

wire feed, cables and gun; (4)

MILLER XMT-304 300 amp mig

welder, s/n LC187108,

LC066131, LC187105, LC066116,

with MILLER 60 series wire feed;

MILLER 200 amp mig welder,

s/n HJ205470; (5) MILLER CP-

200 200 amp mig welder, s/n

JH291904, JH291903, JH212102,

JH212099, JH197426; MILLER

CP-300 300 amp mig welder,

s/n JH148923; MILLER 300MT

300 amp mig welder; MILLER

SRH-333 300 amp arc welder,

s/n 71-592686

GRIZZLY 15" vertical bandsaw,

s/n 54815; KALAMAZOO

horizontal bandsaw; WALKER

TURNER vertical bandsaw, s/n

51BF2A, with 151⁄2" throat, 61⁄ 2"work height; AVEY No. 3 floor

type drill, s/n 30419;

POWERMATIC 1200 floor type

drill press, s/n 8120V443, with

up to 4600 RPM, 21" cap.;

BROWN & SHARPE No. 2Ahorizontal mill, with 101⁄2" x 45"table; BROWN & SHARPE No. 1 Ahorizontal milling machine, with11" x 36"; DELTA DC-380thickness planer, s/n J0034;DELTA floor type drill press;POWERMATIC 1150 floor typedrill press; CUSTOM 12" discsander; GRIZZLY verticaloscillating drum sander; (2)ROCKWELL 12" dia. vertical discsander; WILTON 20" vertical discsander; DEWALT 12" mitre saw;PEXTO 137K 36" foot shear, s/n4/55, with 16 ga cap.; DELTA 10"table saw; AIRCO DDR-245 PA250 amp arc welder, with cablesand gun

ALSO: DUMORE tool postgrinders, rotary tables, indexingheads, angle plates, machinevises, threading dies, perishabletooling, clamps, sine plate,scraping table, bench grinder,shop tables with bench vise largequantity hand tools includingpower tools, mag base drills pipewrenches, conduit benders,ratchet sets, torque wrenches,shop carts, tool boxes and somuch more

2 AVAILABLE TWIN DYNAMIC DR-40005 axis welding robot cell,w/weld positioner

View of MILLER mig welders

FEDERAL 100 KVA spot typepress welders

1999

162 DAY SALE

ADVANCED POLY 14 head parts distributioncounting & bagging system

SIGMA 10 head auto parts distribution counting & bagging system

MACWRAP MAC3000 SR-30 auto banding machine

FREEDOM 6500 auto stretch wrap machine

PACKAGING EQUIPMENT (Day 1)

ADVANCED POLY PACKAGING 14 station auto packagingsystem, with 14 APP vibratory bowl feeder, DRO, (2) APP 8.5x 21' motorized conveyor tray, APP T-1000 auto bagger,METTLER-TOLEDO CHECKMATE 2 digital scale, (3) DORNERSERIES 2100 belt conveyors

SIGMA SYSTEMS 10 station auto packaging system,with BATCHMASTER DRO, 14" x 25" SIGMA SYSTEMSmotorized conveyor, elevator conveyor, SIGMA SYSTEMSFILMSTAR auto bagger, METTLER TOLEDO CHECKMATEdigital scale, (2) CHECKWEIGHER T-59CM belt conveyors

2000 FREEDOM 6500 auto 360 degree stretch wrapper

(2) 2001 LANTECH S300XT automatic stretch wrappers,s/n SM002001, SM001146

2002 MACWRAP MAC3000 horizontal stretch wrapper,s/n 330-1101049, with 30" dia. opening

MULLER 2203 auto stretch wrapper, s/n A1660894

ORION M67/121S auto stretch wrapper, s/n 9089719

ORGAPACK 2600 auto bander, s/n 1596

(2) GERRARD 415 auto bander, s/n 16042, 16209

(4) AIE 300 FL impulse foot sealer

(2) FWC-DWM-IV 200' auto conveyor lines, with rollertables, CRYOVAC FB-1000 3 carton closer w/NORDSENVISTA 3800 hot melt glue applicator

3M-MATIC 29500 “L” clip applicator, s/n 4387

LANTECH auto stretch wrap machine

PROXY BIDDINGIf you are unable to attendthis auction, we would be

pleased to act as your proxy.Please contact our office at(416) 962-9600 or visit our

website for a proxy bid form,terms and additional

information.

2002

2000

17


GARDNER DENVER 250hp air compressor,w/refrigerated air dryer

GARDNER DENVER250 hp air compressor

View of ALMCO V26 vibratory flow through deburrers

View of paint system (line 1)

View of paint system (line 2)

AWT APV 6080 auto silk screenprinting press

4 AVAILABLE

3 AVAILABLE

METPRO 4500 pro filter press

FINISHING DEPARTMENT/PAINT LINES (Day 1 & 2)

SPRA-CON 5 stage phosphate wash, with 48" x 78" openingSPRA-CON dry-off/bake oven 400F, (2) RANSBERG 10' dia. opensided paint chamber overhead conveyor w/12" centers

PROTECTAIRE 3 stage phosphate wash, with 48" x 78" opening,KOCH 400F dry-off/bake oven, (2) DEVILBLISS/RANSBERG 10' dia.paint chambers, overhead conveyor w/12" centers

KOCH 3 stage phosphate wash, with 48" x 120" opening KOCHdry-off oven, KOCH 400F, (2) RANSBERG 10' dia. open sided paintchamber overhead conveyor w/12" centers

KOCH 3 stage phosphate wash, with 48" x 78" opening, KOCHdry-off oven, (2) RANSBURG 10' dia. open side paint chamber,secondary dry-off between paint chambers, KOCH 400F bakeoven, ZIG-ZAG overhead conveyor w/12" centers

(2) CUSTOM powder coat booths, with 28" x 27" table

1999 AWT APV-6080 silk screen printer, s/n 67608-1, with75" x 90" table

HARBIL 12 station paint colorant dispenser paint shaker

HEDSTROM 7.5' x 12' silk screen booth, with 6' x 10' opening,also large qty. of silk screen frames and wipers

(2) ALMCO V26TF pass through vibratory deburrer, s/n 4P35495002

ALMCO 052-8 pass through vibratory deburrer, s/n 76438, withincline motorized conveyors

ALMCO 5' dia. vibratory finisher, with HERCULES swing cradleand RAPISTAN incline conveyor

KH HUPPERT GF 12P SPE industrial oven, s/n 79, with 13" x 12" x28" gas fired chamber

HONEYBEAR box closer, with (3) VISTA 3700V hot glue controllers

FACTORY EQUIPMENT (Day 1 & 2)

PARKSON MFP-630-100 filter press, s/n 80013002

GARDNER DENVER ELECTRA-SAVER 250 HP rotary screw aircompressor

GARDNER DENVER ELECTRA-SCREW 200 HP rotary screw aircompressor


CAMPBELL HAUSFELD 7.5 HP vertical tank mounted aircompressor, with 80 gallon tank

CAMPBELL HAUSFELD 5 HP tank mounted air compressor


IMC 318VL 7.5 HP vertical tank mounted air compressor, with 80gallon tank

(2) GARDNER DENVER D-15A air dryer, s/n 100-4085

SPEEDAIRE 5U287 air dryer

(2) COMPAIR refrigerated air dryers

GARDNER DENVER eliminator oil / water separator

(2) BORTEK FACTORY CAT 48 floor sweepers w/charger

GENIE Z-30/20N electric boom lift, with 36' max. height, 21'max. reach, 500 lb. cap.

AAR RS50E electric floor sweeper w/charger

(3) BHS & MTC battery handling systems

GENERAC pressure washer, with HONDA 5.5 HP gas motor,2.5 GPM, 2400 PSI

MTC BT 24 ML battery transfer carts

(2) SINGER sewing machines

MATERIAL HANDLING (Day 1 & 2)

MID-ATLANTIC 15 ton free standing single girder underlong overheadbridge crane, with 30' span, 133' long remote/pendant control

SHEPARD-NILES 5 ton single girder underswing overhead bridge crane,with approx. 30' span pendant control

(3) YALE MPE080LON24T2796 electric pallet trucks, s/n A803N10-782V,A803N10-783V, A803N10-778V, with 8000 lb. cap., 96" long forks, charger

YALE ERC080HDN36SF084 electric forklift, s/n A839V02359V, 8000 lb. cap.,120" lift, side shift, 15" wide forks, charger

(2) YALE ERCO80HDN36SF084 electric forklifts, s/n A839VO-2358V,A839VO-2357V, with 8000 lb. cap., 120" lift, side shift, 96" forks, charger

YALE ERCO60RFN36SF084 electric forklift, s/n E108V08962V, with 6000 lb.cap., 126" lift, side shift, charger

(2) CROWN PE3540-60 electric pallet trucks, s/n 6A158-325, 6A161-375,with 6000 lb. cap., charger, 96" forks

(6) CROWN PE3250-60 electric pallet trucks, s/n 6A153878, 6A158329,6A147973, 6A158328, 6A147972, 6A147971, with 6000 lb. cap., charger

(40) BT, ZENITH & CROWN pallet trucks up to 5000 lb. cap.

CROWN 35RRTT electric reach truck, s/n W-75181, with 3500 lb. cap., 210" lift,charger

CROWN 45RTT electric reach truck, s/n W-56324, with 4500 lb. cap.,230" lift, side shift, charger

MTC 4,000 lb. “A” frame gantry, with COFFING 2 ton electric hoist

BALEMASTER BALEWEL 25 HP hydraulic cardboard baler

BISHAMON EZ-TILTER box tilter

(2) TANI-AB VM-160 vacuum lifter, with 125 lb. cap.

BUDGIT 2 ton pneumatic hoists

LIFT-RITE 3000 box lifter

(2) CUSTOM 4000 lb. electric scissor lift table

KMF SDC-55HD hydraulic drum compactor

(2) MCCLAIN 30 HP and 20 HP hydraulic compactors

BHS battery transfer conveyor systems

CUSTOM approx. 85' motorized 18' wide belt conveyor

(2) TITAN 18" motorized inclined conveyor

SOUTHWORTH box tilter

GENIE-LIFT 350 lb. cap. die lifter

CAROLINA engine lift

CUSTOM 36" x 60" steel layout table

CUSTOM 24" x 36" steel layout table

INTERMEC TRAKKER ANTARES 2480 digital time clock system

CUSTOM rolling shop ladders up to 8'

CUSTOM step ladder up to 10'

ALSO: over 1,000 metal totes up to 72" x 38" x 60"; 30,400 fenceposts up to 96" high x 23⁄8" dia.; over 100 4 wheel shop carts; over225 sections of adjustable pallet racking up to 20' high; 256 stackingparts bag totes; 25+ dumping scrap hoppers, shop carts, workbenches, tables, tape machines, strapping caddies, shop fans, shop vacs, up to 15 gallon cap. pressure washers, gloves, sanding discs, power hand tools, wrenches, socket sets, drills, tool boxes, levels, roller conveyor tables, scissor lift tables, cabinets

182 DAY SALE

View of dumping scrap hoppers

View of tote bins

View of stackable racks

OVER 1000 AVAILABLE

KMF SCD-55HD hydraulic baler

View of material handling View of material handling

MIDATLANTIC 15 ton x 35' overhead bridge crane,w/remote pendant

BHS power traveling gantrybattery handling system

View of GENIE lift & SKYJACK scissorlift

VEHICLES (Day 2)

INTERNATIONAL 4900 single axle shunt truck,s/n IHSSDAANXTH296347

INTERNATIONAL HARVESTER 1954 single axle cubevan, s/n AA195KHA12638, with 16' box

1991 CHEVROLET 2500 CHEYENNE 3⁄ 4 ton pick-uptruck, s/n IGCFC24K9ME162422

L & S dual axle utility trailer, with 6' x 8' bed

1990 OLDSMOBILE REGENCY BROUGHAM 4 doorsedan, s/n IG3CW54CXL4314099

OFFICE EQUIPMENT (Day 1 & 2)

(2) CANON IMAGE RUNNER 110 deluxe duplicatorprinter, with SUN ultra 5/10 UPA/PCI control; (3) DELLXEON PC’s, with monitor and keyboard; (20) DELLPENTIUM 4 PC’s, with monitor and keyboard; (15) DELL& SWAN PENTIUM 3 PC’s, with monitor and keyboard;ENCAD CADJET 3D plotter; HEWLETT PACKARDDESIGN JET 230 plotter; HEWLETT PACKARD 5500laser jet printer; (13) CUSTOM modular office systems;NORTHERN TELECOM MERIDIAN 1 phone system,with 100+ handsets, paging, (3) BOGAN amplifiers, (4)power connect hubs; SILICONE GRAPHICS PC, withmonitor and keyboard; XEROX 3030 plotter; executivedesks, chairs, boardroom tables and chairs; televisions;VCR’s; vertical and lateral file cabinets; bookcases;printers; fax machines; credenzas; blue print cabinets;PC hard drives; monitors; HIBOY cabinets; whiteboards; CUSTOM 35 mm cameras; digital and videocameras; LCD projectors; barcode system; etc.

INSPECTION (Day 2)

MICRO-VU INSPEC meteorology system, with MICRO-VU video measuring system, MICRO-VU FD-10 focusdetector, DELL P4 computer 22" x 42" table

(2) Q-PANEL Q-U-V- accelerated weathering tester,s/n 94-8297-47, 01-12199-66-BASIC

TINIUS-OLSEN DS-50 tensile tester, s/n 148135, withTHURMAN 12,000 lb. load cell, TINIUS OLSEN 2000paper recorder

TINIUS-OLSEN MP993 extrusion plastometer, s/n 176992

WILSON 4TT-ARB hardness tester, s/n 1939

ALSO: ALNOR COMPUFLOW digital air gauge; BIOSYSTEMS PHD5 multi gas detector; PANAMETRICS25DL thickness gauge; QUEST noise dosimeter; RECORA28" x 120" safety mat; SPER-SCIENTIFIC 840021 lightmeter; MIRAGE ND-2003 electronic densimeter, with0.001 density resolution 200 G cap.; DENVERINSTRUMENTS M-120 digital scale, with IMG-120Gcap.; (2) OHAUS 25 lb. cap. digital scale; TOLEDOportable platform scale

19


CANON Image Runner 110production printer

View of DELL Poweredge 2650servers, hubs, backups, etc.

View of plotters

View of offices

View of photocopiers

2002

2 AVAILABLE

MICROV M325 videomeasuring system

TINIUS OLSEN 12,000 lb.tensile testerQUV weather testing machine

2 AVAILABLE

View of vehicles & trailer, w/propanestorage tank

View of 1995 INTERNATIONALNavistar 4900 shunt truck,INTERNATIONAL HARVESTER16' box truck

View of BORTEK floor scrubbers & sweepers

®

CORPORATE ASSETS INC.P.O. Box 20071Portland, Oregon 97294-0071

PRINTED IN U.S.A. IP-5200534© 2005 CORPORATE ASSETS INC., ALL RIGHTS RESERVED

INSPECTION

Tuesday, March 29th, 2005, 9:00 A.M. to 5:00 P.M. & Morning of Sales

DIRECTIONS

FROM HARRISBURG’S INTERNATIONAL AIRPORT: Follow INT 76West (Pennsylvania Turnpike, toll road) for approximately 90 milesand exit off US 220 (Bedford Exit). After toll turn right at lights onUS 220 and proceed for approximately 2 miles. Then turn left ontoSunnyside Road. Plant is located 1/2 mile up on the right handside. Please allow approximately 90 minutes traveling time fromthe airport.

FROM PITTSBURGH’S INTERNATIONAL AIRPORT: Exit airport onRoute PA-60 South toward Pittsburgh/I-79 Pennsylvania Turnpike.Proceed to and merge onto International US22 East. Proceed andenter onto I-76 East (Toll Road). Travel for approximately 90 milesand EXIT OFF US 220 (BEDFORD EXIT). After toll turn right at lightson US 220 and proceed for approximately 2 miles. Then turn leftonto Sunnyside Road. Plant is located 1/2 mile up on the righthand side.

ACCOMMODATIONS & CAR RENTALS

Please visit our website for details at www.corpassets.com

PAYMENT

In full by Friday, April 1st, 2005, 3:00 P.M. All purchases require adeposit of not less than 25% in cash or certified check. All paymentsmust be made by cash, certified check or company check with a bankletter of authorization guaranteeing irrevocable payment toCorporate Assets Inc. A 10% Buyer’s Premium will apply at this sale.

REMOVAL

All small items to be removed by Friday, April 1st, 2005, 3:00 P.M. Allremaining items to be removed by Friday, April 15th, 2005, 3:00 P.M.

LICENSE NUMBER

Lic. No. AY-000222-L

TERMS OF SALE

Corporate Assets Inc. assumes no liability for errors or omissions inthis brochure. Corporate Assets Inc. expressly reserves the right todetermine the manner of conducting the auction as it may deemappropriate. All subject to prior sale.

AUCTIONEER

S

ASSOCIATION

OF ALBER

TA

MEMBER

NAT

IONAL ASSOCIATIO

N

BA

N

KRUPTCY TRUSTEE

S

MEMBER IN GOOD STANDING:

This brochure is only a partial listing

VISIT OUR WEBSITE FOR MORE DETAILED

LISTINGSAND PHOTOS

www.corpassets.com

AUCTION CONDUCTED BYCORPORATE ASSETS INC.

For further informationcontact us at:

2 St. Clair Ave. W., Suite 1002,Toronto, OntarioCanada M4V 1L5

Tel: (416) 962-9600Fax: (416) 962-9601


Toronto–Chicago

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

PROXY BIDDINGIf you are unable to attend this

auction, we would be pleased to actas your proxy. Please contact our

office at (416) 962-9600 or visit ourwebsite for a proxy bid

form, terms and additionalinformation.

LISTA multi-drawertool cabinets

View of tool cabinets

View of hand tools

View of hand tools

APPRAISAL SERVICESWhat’s the real value of your equipment? Ifyou require a detailed appraisal for banking,insurance, or internal purposes, consult withthe certified experts at Corporate Assets Inc.

• We will appraise one machine or yourcomplete plant

• Going concern, fair market, orliquidation values

We provide appraisal services anywhere inthe world for all types of industrialmanufacturing and processing equipment.Call us in complete confidence today withyour requirements.

Toronto: (416) 962-9600 • Fax: (416) 962-9601

email: [email protected]

Toronto–Chicago

Documents

PUBLIC AUCTION - Biditup · 2016. 11. 30. · DC motor, (3) side stands TURKSHEADS, double sided, detwisting endcoder ALPHA CUTOFF: Model SR-10-30 S# 78-528 rated cap.: 2.5" OD x