AUCTION

Assets No Longer Required in the Continuing Operations of

CAMBRIDGE METALS & PLASTICSComplete State-of-the-Art Stamping & Fabrication Facility

NOW OFFERING FINANCING & LEASINGBIDITUP Capital Corporation

LIVE ON-SITE

OBI & Gap Frame PressesHydraulic Gap Frame PressStraight Side Single-Crank PressServo FeedPress BrakesRobotic Welders & Positioners

WeldersOverhead Crane SystemToolroomForklifts/Box TruckBattery ChargersMedia Blast

WeldersMiscellaneousAir CompressorsAnd Much More!

Thursday, November 10, 2005Beginning at 10:30 CST200 South Cleveland StreetCambridge, Minnesota 55008

Minster OBS 165-Ton Press

VariableSpeed

2000

Pacific 250-Ton HydraulicGap Frame Press

1991

203213 BIDITUP 11/7/05 11:05 AM Page 1

OBI & GAP FRAME PRESSES

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL (818) 508-7034

Bliss 45-Ton OBI Press

2000 MINSTER Mdl. OBS-150 165-Ton, 9.84" stroke, 30–55 variable strokes per minute, 29.9" x 46" x 6-1/2" thick T-slottedbolster plate, 22.8" x 27.5" T-slotted slide, 17.5" shut height, 3.94" motorized slide adjustment, Quick Lift slide range .5"–4.44",Minster OmniLink programmable control,air clutch and brake,air counterbalances,20 hp.Eddy current drive,hydraulic overload,Shadow VI light curtains, s/n 29401.

BLISS Mdl. 28 95-Ton, 6" stroke, 28" x 37" bed, 14-1/4" shut height, 4" thick bolster plate, 3" thick T-slotted slide plate, rollingkey clutch, air cushion.

ROUSSELLE Mdl. 6 60-Ton, 3" stroke, 50 strokes per minute, 18" x 30" bed, 12-1/2" shut height, 3-1/2" slide adjustment, 2" thickbolster plate, air clutch and brake, s/n 17093.

ROUSSELLE Mdl. 6 60-Ton, 3" stroke, 50 strokes per minute, 18" x 30" bed, 12-1/2" shut height, Triad controls, air clutch andbrake, s/n 10169.

BLISS Mdl. C-45 45-Ton, 3" stroke, 18" x 29" bed, 12-1/4" shut height, 3" slide adjustment, bolster plate, air cushion, rolling keyclutch, s/n H-59311.

MINSTER Mdl.3 22-Ton, 2-1/2" stroke,12" x 20" bed,8" shut height,2" slide adjustment,bolster plate,rolling key clutch,s/n 3-4364.

(4) BLISS Mdl. 2 20-Ton Open Back Inclinable Presses, 10" x 17" bed, rolling key clutch, s/n’s 21882, H-15370, H-15371,and 40-54635.

(2) HAVIR Mdl. 1 10-Ton Open Back Inclinable Presses, rolling key clutch, s/n’s 4367, 6488.

2000

OBI & GAP FRAME PRESSES

– 2 –

2000 Coe 18" Servo Feed

2000

2000 Minster OBS 165-Ton Press

75-TonDie

Cushion

LEASING &FINANCING

NOW AVAILABLEDIRECT FROM

BIDITUPCAPITAL

CORPORATION

SEE PAGE 7

1991

1991 Pacific 250-Ton Hydraulic Gap Frame Press

203213 BIDITUP 11/7/05 11:05 AM Page 2

HYDRAULIC GAP FRAME PRESS, STRAIGHT SIDE SINGLE-CRANK PRESS,SERVO FEED, PRESS BRAKES

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

Minster 22-Ton OBI Press

HYDRAULICGAP FRAME PRESS1991 PACIFIC Mdl. 250 PF-OBS 250-Ton, 12"stroke, 21-3/4" daylight to bolster plate, 34" x 58"x 5-1/2" thick T-slotted bolster plate, 28" x 36"T-slotted slide, Gib 8-point gib guided slide,75-ton die cushion air/hydraulic, speedsapproach:324 IPM fast/132 IPM slow; pressing:50IPM, return: 204 IPM fast/78 IPM slow, hydraulicknockout in slide, GE Fanuc PLC, s/n A946.

STRAIGHT SIDE SINGLE-CRANK PRESSBLISS Mdl. 306 80-Ton, 6" stroke, 40 strokes perminute, 25" x 25" bed, 16" shut height, 4" slideadjustment, rolling key clutch.

SERVO FEED2000 COE Mdl. CPRF SM-2 18, 18" x .125"/12" x.156"/6" x .187" capacity, 340 feet/minute max.speed, 2.63" diameter solid feed rolls, servomaster control, inch/metric programming, pilotpositioning, s/n 25628.

PRESS BRAKESCINCINNATI Mdl. 135FM x 6 135-Ton 2-AxisCNC Hydraulic Press Brake, 8' O/A bed and ram,6'6" between housings, 8" stroke, daylight 15"max., 4-1/2" high die holder, sectional ramclamps, s/n 42038, w/Hurco Autobend 7 CNCback gauge, Hurco s/n HEBA9018076A.

1984 DI-ACRO Mdl. 75T-8 75-Ton 2-Axis CNCHydra-Mechanical Press Brake, 8' O/A bed andram, 6'7-1/2" between housings ,adjustable.25"–3" stroke, 12" shut height, 5" high die holder,power adjustment, Di-Acro CNC gauging system,s/n 6751184256.

NIAGARA Mdl. IB-60-6-8 90-Ton MechanicalPress Brake, 8' O/A bed and ram, 6'6" betweenhousings, 6' x 3/16" bending capacity, 3" stroke,16" shut height, 5" adjustment, sectional ramclamps, 24" rear-operated manual back gauge,s/n 43721.

DI-ACRO Mdl. JC1048 Mechanical Press Brake,4' O/A bed and ram, 10-gauge bending capacity.

Niagara 90-Ton Press Brake

Bliss 80-Ton Straight-Side Single-Crank Press

– 3 –

Rousselle 60-TonOBI Press

View of Bliss 20-Ton & Havir 10-Ton OBI Presses

Rear View of Cincinnati CNC Press Brake

Di-Acro 75-Ton CNC Press Brake

2-AxisCNC

Cincinnati 135-Ton 2-Axis CNC Hydraulic Brake

2-AxisCNC

203213 BIDITUP 11/7/05 11:06 AM Page 3

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL (818) 508-7034– 4 –

ROBOTIC WELDERS, ROTARY TABLE & POSITIONERS, WELDERS, OVERHEAD CRANE SYSTEM

Motoman K6SB Robots & Motoman Dual-Sided Positioner

Motoman Dual Sided Welding Positioner

Motoman Robotic Welder and Motoman Rotary Table

OTC Robotic Welder, w/Camco Rotary Table

ROBOTS & ROBOTIC POSITIONER(3) 1993 MOTOMAN Mdl. YR-K6SB1 6-Axis Robots, turning (S-axis)340°, lower arm (L-axis) 240°, upper arm (U-axis) 270°, roll (R-axis) 360°,pitch/yaw (B-axis) 270°, twist (T-axis) 400°, 6 Kg payload capacity,YasnacERC control, s/n’s RH9991-3082-4, RH9973-2095-1, S33821-1-1-4, (3)Hobart Mega Mig 300 RVS welding power supply units.

MOTOMAN Mdl. YRFL-NND1OWC 6-Axis Robot, Hobart weldingpower supply unit, s/n S12655-1-1.

(2) 1992 MOTOMAN Mdl. K6SB/YRFL-NNNAO6WB 6-Axis Robots,Motoman arc control rotary table, Yasnac Motoman Control No. K6SB,s/n’s RH9973-2111-4, RH9973-2111-6, RH9973-2103-3.

MOTOMAN Dual-Sided Positioner, each fixture rotates vertically,rotating base, table size 24" x 96" each side, Yasnac 6000RGMotoman control.

OTC Mdl. IRB-212 Robot, Miller OSA Com robot control, robot s/n1L3231Y5017101, Camco Mdl. 900RDM6 H32-270 rotary table, 54"diameter, s/n R8339.

PANASONIC Mdl. AW005C 6-Axis Robot, Hobart welding powersupply unit, s/n 1585.

(2) ABICOR Binzel Torch Cleaners.

WELDERSHOBART Excel Arc 6045 CV WeldingPower Supply, 400-amp,100% duty cycle.

(2) HOBART Mega Mig 300 RVSWelding Power Supplies, 300-amp,100% duty cycle.

(2) PANASONIC Mdl. YD350HF-2Welding Power Supplies.

OTC Mdl. CPMS 350 Welding PowerSupply, s/n P9706YD.

LINCOLN Mdl. TIG 300/300 Tig Welder,300-amp, s/n AC 606897.

NELSON Mdl. 750 373 00 Stud Welder,s/n 88878.

OVERHEAD CRANESYSTEMHARRINGTON Mdl.YF-356 3-Ton Hoist,20' span, 100' rail length. Harrington 3-Ton Hoist

19921993

203213 BIDITUP 11/7/05 11:06 AM Page 4

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM – 5 –

Feeler High Accuracy Lathe

IBP Pedrazzoli Tube Bender

Bridgeport Vertical Mill

TOOLROOM

TOOLROOM1992 7-Ton PEMSERTER Auto Sert, Mdl. X-7, stroke 7",throat 20-1/2", automatic/manual, Pemserter s/n 00190,w/Parts Feeders Inc. vibratory feed bowl, Mdl. B10,s/n BC7060.

BRIDGEPORT Vertical Mill, table 48", power feed, 1 hp.,s/n BR162558.

IBP/PEDRAZZOLI Mdl. 32 Hydraulic Tube Bender, 1.26"x .059" round capacity, 1.18" x .031" square, 128" max.length, 185° max. angle bend, 4° min. angle bend, hydraulicmandrel extractor.

WHITNEY Mdl. 230 Punch, 18" throat, s/n 24T1167.

DoALL 16" Horizontal Band Saw, feed table.

H-Frame Shop Press.

FEELER Mdl. FTS-27 High-Accuracy Screw Lathe,s/n 720903.

(4) CLAUSING Drill Presses; ROCKWELL Drill Press;DAYTON Drill Press.

TIMESAVER Belt Sander, 36" capacity, dry belt.

(2) TRION Air Cleaners.

AERCOLOGY Air Cleaner.

DoAll Horizontal Band Saw1992 Pemserter Mdl. X-7 Auto Sert

1992

LEASING & FINANCING

NOW AVAILABLE DIRECT FROM

BIDITUP CAPITAL CORPORATION

SEE PAGE 7

203213 BIDITUP 11/7/05 11:06 AM Page 5

TO SCHEDULE AN AUCTION OR APPRAISAL, CALL (818) 508-7034– 6 –

>Electric

Pallet Lift

Mitsubishi 3,500 Lb. Forklift

Mack Truck

Raymond 4,000 Lb. Electric Lift

View of Welding Power Sources

<Guyson BlastCleaningCabinet

1995

FORKLIFTS/BOX TRUCK1995 MACK Mdl. CS200P 26,000-Lb.Capacity Truck, 24' length box trailer,88"wide x 90" tall door, VIN VGC8A07A-558B01179.

RAYMOND Mdl. 31-R40TT 4,000-Lb.Stand-Up Type Electric TelescopingForklift, 196", s/n 031D-78-5800.

ALLIS-CHALMERS 4,000-Lb., LPG.

(3) MITSUBISHI Mdl. FG18B 3,500-Lb.,LPG, sideshift, s/n AF3150532.

BATTERYCHARGERSPACIFIC CHLORIDE Mdl. 12V0250K2C,s/n 88R8315.

C&D Mdl. ER6A/C85E, s/n PIU781928.

HERTNER Mdl. 3SN12-775, s/n HR3-1021-1-01.

HOBART Mdl. 3-3R18-830-2, s/n 78C-S02769.

FORKLIFTS/BOX TRUCK, BATTERY CHARGERS

203213 BIDITUP 11/7/05 11:06 AM Page 6

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM – 7 –

Bostitch Stapler

KalamazooPallet Wrapper

Despatch 5-Shelf Oven

Ingersoll-Rand 50 Hp. Compressor & Zurn Dryer

Newcor 200 KVA Press-Type Welder

Newcor Welder Control

150 KVA Spotweld Welder

MEDIA BLASTG U YS O N M d l . 1 2 5 0 X A M e d i aBlaster, single-door cabinet, 6' deepchamber,53" wide x 57" tall door opening,dust collector system, s/n CM12967.

WELDERSNEWCOR 200 KVA Press-TypeWelder, Robotron control, 20" throat,water-cooled,440-volt,s/n CM 200KVA.

150 KVA Spot-Weld Knee-TypeWelder, 440-volt, s/n 102199CAM.

HOBART Excel Arc 6045 CV.

(2) HOBART Mega Mig 300RVS.

(6) PANA STAR HF350 and DYNAAUTO 350 PS.

MISCELLANEOUSPLASTIFORM Vacuum Form.

(2) BOSTITCH Mdl. FC95ECStaplers, s/n’s M10679, 10487.

(2) Mdl. 3M S-857 Case Sealers,L-clip applicator.

DESPATCH Style PLHD543 5-Shelf Oven, Intermatic controls,s/n 103815.

(2) KALAMAZOO Mdl. 2000PMPacking Systems PalletWrappers, 48" diameterturntable, s/n’s 960905 and950904.

Electric Pallet Lift.

(10) Circular Fans, 24" diameter.

AIR COMPRESSORSINGERSOLL-RAND 50 Hp. Compressor.

INGERSOLL-RAND 15 Hp. Compressor.

INGERSOLL-RAND Mdl.HG2017 40 Hp.Compressed Dryer,s/n 883HG9369.

ZURN Dryer.

MEDIA BLAST, WELDERS, MISCELLANEOUS, AIR COMPRESSORS

203213 BIDITUP 11/7/05 11:06 AM Page 7

DIRECTIONSFrom: Minneapolis-St. Paul Airport (MSP)Exit the airport onto Highway 5 South and follow to I-494.Travel west on I-494 to I-35 West (Exit 5A).Travel north on I-35West through Minneapolis. Remain on I-35 West to Highway10 (Exit 30). Travel north on Highway 10 for approximately2.7 miles to Highway 65. Travel north on Highway 65 forapproximately 30 miles to exit for First Avenue/Highway 95.Turn left (west) onto First Avenue/Highway 95 and follow untilCleveland Street. Watch for auction signs and turn left ontoCleveland Street to 200 South Cleveland Street.

IP-5203213 NOTE:This is only to be used as an aid in planning.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

11426 Ventura BoulevardSecond FloorStudio City, California 91604Phone: (818) 508-7034Fax: (818) 508-3025info@biditup.com

ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER

LIVE ON-SITE AUCTION

Assets No Longer Required in the Continuing Operations of

CAMBRIDGEMETALS & PLASTICS

AUCTIONThursday, November 10, 200510:30 A.M. CST

LOCATION200 South Cleveland StreetCambridge, Minnesota 55008

PREVIEWWednesday, November 9, 20059:00 A.M. to 4:00 P.M. CST

TERMS & CONDITIONSSale conducted by BIDITUP, subject to our customary terms of sale (available at theauction site on the day of the sale), and any and all amendments and modificationsannounced by the auctioneer at the time of the auction.The auctioneer and seller makeno warranties or guarantees, expressed or implied, as to the defects in or the correctnessor accuracy of the descriptions in any advertising of any item(s) being auctioned andwill not be responsible for any advertising discrepancies or inaccuracies of any kind. Allitems sold will be on an “AS IS,”“WHERE IS,” and “WITH ALL FAULTS,” basis “WITHOUTEXCEPTION” and “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” AUCTIONEER ANDSELLER MAKE NO WARRANTIES OR GUARANTEES OF ANY KIND, EXPRESSED OR IMPLIED,AS TO THE NATURE, QUALITY, VALUE, OR CONDITION OF THE ITEM(S) BEING AUCTIONEDOR ITS (THEIR) SUITABILITY FOR ANY USE. AUCTIONEER AND SELLER EXPRESSLY ANDSPECIFICALLY DISCLAIM WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE. AUCTIONEER SHALL NOT BE LIABLE FORSPECIAL,CONSEQUENTIAL OR INCIDENTAL DAMAGES. It shall be the buyer’s obligation toverify information and descriptions of property prior to sale. BIDITUP, and its advertisingagency assume no liability for errors or omissions in this brochure.The auctioneer doesnot warrant the age, accuracy, genuineness, authenticity, description, weight, count, ormeasure of any listings specified herein.Although it is not likely, auction sales are subjectto cancellation or postponement, and sometimes items are withdrawn from the sale,kindly contact BIDITUP prior to travel as there will be no reimbursements. On the day ofthe sale, all successful bidders must immediately pay the full purchase price in cash,certified funds, cashier’s check, wire transfer, or company check with a letter from thebuyer’s bank guaranteeing unqualified payments to BIDITUP. This letter is valid until30 working days after the auction sale.

Company checks without letter from bank guaranteeing unqualified payment will not beaccepted.The failure to make payment promptly shall be considered default and each lotor lots so purchased will be placed for resale.The buyer must pay the total invoice pricefor all the lots purchased before any removal can begin. All buyers must pay applicablesales tax (unless evidence of exemption is provided to auctioneer’s satisfaction). Buyersare responsible for the transportation, associated costs, and risks involved in the removalof purchased item(s). Certain items may contain residual chemicals and/or hazardousmaterials.The purchaser(s) hereby indemnify and hold harmless the auctioneer and sellerfrom any and all damages, claims, or liability from any injuries to persons or property ofany type whatsoever caused during the sale of, during the removal, or during use oroperation of the purchased item(s). If you are unable to attend, please contact us regardingplacing a proxy bid. PLEASE NOTE: ALL SALES ARE SUBJECT TO A BUYER’S PREMIUM.

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEWWW.BIDITUP.COM

LODGINGCountry Inn by Carlson (Approx. 0.4 Mile From Site) 300 Garfield Street SouthCambridge, Minnesota 55008(763) 689-0542

Super 8 Motel (Approx. 12.6 Miles From Site) 6010 Main StreetNorth Branch, Minnesota 55056(651) 674-7074

AmericInn Motel & Suites (Approx. 12.8 Miles From Site)38675 14th AvenueNorth Branch, Minnesota 55056(651) 674-8627

FEATURED AUCTIONAssets No Longer Required in the Continuing Operations of

CAMBRIDGE METALS & PLASTICSComplete State-of-the-Art Stamping & Fabrication Facility

Thursday, November 10, 2005Cambridge, Minnesota

UPCOMING AUCTIONS10/25 PROGRESSIVE STAMPING, FABRICATING, ASSEMBLY, TOOL & DIE FACILITY

Chicago, IL

10/26 FABRICATING, MINSTER STAMPING, DIE CASTING, MACHINING, PLATING,POWDER COATING FACILITY • Rockford, IL

11/1 MAJOR CNC AMADA FABRICATION FACILITY • Tualatin, OR

11/3 COMPLETE CRT MANUFACTURING FACILITY – STAMPING, DEEP DRAWING,HEAT TREATING, COATING, PACKAGING FOR TELEVISION PICTURE TUBE FRAMES,MAGNETIC SHIELD PRODUCTS & BAKING PANS, METAL STAMPING FACILITYWITH HYDRAULIC, SSDC, & OBI MECHANICAL STAMPING PRESSES • Perrysburg, OH

11/8 MULTI-MILLION DOLLAR LIGHT & MEDIUM CNC METAL FABRICATION, INJECTIONMOLDING, & ROBOTIC WELDING FACILITY • Anaheim, CA

11/9 MAJOR STEEL & BEAM FABRICATION FACILITY • Bessemer, AL

11/16 MULTI-MILLION DOLLAR VALUATION OF NEW, USED, & REBUILT AUTOMOTIVEPARTS & COMPONENTS, FOREIGN & DOMESTIC • Santa Ana, CA

11/17 COMPLETE CNC MACHINE SHOP INCLUDING VERTICAL MACHINING CENTERS,CNC LATHE, ENGINE LATHE, VERTICAL MILLS, GRINDING, & MORE • San Marcos, CA

11/16 METAL STAMPING FACILITY WITH HYDRAULIC, SSDC & OBI MECHANICALto STAMPING PRESSES • Emporia, KS

11/18 Online Auction Only!

12/8 COMPLETE OUTDOOR PATIO FURNITURE MANUFACTURING FACILITY –STAMPING, WROUGHT IRON AND ROLL FORMING, WELDING, POWDER COATING& PRODUCT LINE WITH SPECIALIZED MACHINES, PRODUCT DRAWINGS,CUSTOMER DATA. Also at Auction: REAL ESTATE–127,000 SQ. FT. BUILDINGON 13± ACRES • Caruthersville, MO

For More Information,Call (818) 508-7034 or Visit WWW.BIDITUP.COM

CALL US AT 818.508.7034

203213 BIDITUP 11/7/05 11:06 AM Page 8