PTC88C Easy Guide

8/18/2019 PTC88C Easy Guide

1/12

www.spectechnology.com

SPEC-EPON

OLT

Configuration guideKT-PTC88C.0


2/12


OLT (OPTICAL LINE TERMINAL)

Model No. KT-PTC88C (8PON OLT)


3/12


1.Management of OLT

1.1configure serial port

Byte rate:115200

Username and password: admin/admin or root

1.2 Out-band management (MGMT port)

MGMT port

PTC88C(config)# management out-band ip address 192.168.100.111 255.255.255.0

PTC88C(config)# management out-band ip gate-way 192.168.100.1

PTC88C(config)# write

This will save the configuration to the flash memory.

Are you sure?(y/n)

y

y

Saving the user configuration ...... Please wait.Save the user configuration successfully! Escaped 0 seconds.

PTC88C(config)#

PTC88C(config)# show system

[version information]

software version: v1.2.12

hardware version: v1.0

[management inband]

mac address: 00-00-00-11-22-1F

ip address: 192.168.10.5

subnet mask: 255.255.255.0

gateway: 192.168.10.1

vlan id: 1

[management outband]

mac address: 00-00-00-11-22-1E

ip address: 192.168.100.111


4/12


subnet mask: 255.255.255.0

gateway: 192.168.100.1

PTC88C(config)#

1.2 In-band management

1.2.1 add/delete vlan

PTC88C(config)# vlan create 1000 /add VLAN 1000

PTC88C(config)# no vlan 1000 /delete VLAN 1000

PTC88C(config)#

1.2.2 configure the port

PTC88C(config)# interface sni 1/1

PTC88C(config-if-s1/1)# vlan port mode trunk

PTC88C(config-if-s1/1)# vlan port trunk add 1000

PTC88C(config-if-s1/1)#

1.2.3 In-band IP、VLAN

PTC88C(config)# interface vlan 1000

PTC88C(config-if-vlan-interface-1000)# ip address 192.168.1.100 255.255.255.0

PTC88C(config-if-vlan-interface-1000)# ip gate-way 192.168.1.1

PTC88C(config-if-vlan-interface-1000)#management in-band vlan 1000

If you want to delete the IP, with no command:

PTC88C(config-if-vlan-interface-1000)#no ip address


5/12


1.3 OLT port status

Check the status ：

PTC88C(config)# show interface brief

[olt interface list information]

there are 16 entries.

port name Link port enable Speed Pri PVID Vlan-Mode

------ ---------- ---- ----------- ---------- --- ---- ----------

s01/01 SNI1/1 down disable auto 0 1 trunk mode

s01/02 SNI1/2 down disable auto 0 1 trunk modes01/03 SNI1/3 down disable auto 0 1 trunk mode






p01/01 down disable auto 0 1 trunk mode








PTC88C(config)#

Enable the port ：

sni admin-status up

Pon admin-status up

Disable the port ：

sni admin-status down

Pon admin-status down


PTC88C(config-if-s1/1)# sni admin-status up


PTC88C(config-if-s1/1)# show interface brief

[olt interface list information]

there are 16 entries.


6/12


port name Link port enable Speed Pri PVID Vlan-Mode

------ ---------- ---- ----------- ---------- --- ---- ----------

s01/01 SNI1/1 down enable auto 0 1 trunk mode













p01/06 down disable auto 0 1 trunk modep01/07 down disable auto 0 1 trunk mode



Use the same way to configure pon port

2 ONU registration

2.1 register ONU

Show the method

PTC88C(config)# show onu-registration-method mac-list p1/2

PTC88C(config)#

disable——don’t need register

white——whitelist method

black —— backlist method

PTC88C(config)# interface pon 1/1

PTC88C(config-if-p1/1)# onu-registration-method mode white

PTC88C(config-if-p1/1)# show onu-registration-method mac-list p1/1

----- ----------- ---------------

PTC88C(config-if-p1/1)#


7/12


2.2show ONU register information

show epon onu-information:

PTC88C(config)# show onu-list-info

[onu List] [pon 1] Total 2 Items.

llid onu status distance cvlan svlan IP MAC

------- ----------- -------- ----- ----- --------------- --------------

1/1: 1 On-line 16 1 0 192.168.10.1 000F.1EA0.0190

1/1: 2 On-line 14 1 0 192.168.10.1 000F.1E11.1111

[onu List] [pon 2] Total 0 Items

[onu List ] [pon 3] Total 0 Items[onu List] [pon 4] Total 0 Items



[onu List ] [pon 7] Total 0 Items

[onu List [pon 8] Total 0 Items

PTC88C(config)#

2.3 ONU registration and authentication

The default status is automatically registered. When onu power on , do not

need configure it .if you want to register it by manual ,use these command

Enable whitelist 。


PTC88C(config-if-p1/1)# onu-registration-method mode white

Bind ONUPTC88C(config-if-p1/1)# onu-registration-method mac-list add 000F.1EA0.01DD


8/12


2.4 Remark ONU

Describe ONU

PTC88C(config)# interface onu 1/1:1

PTC88C(config-if-o1/1:1)# onu-description TEST1

PTC88C(config-if-o1/1:1)# show onu-dev-info interface 1/1:1

onu id : 2

name : TEST1

device style: fixed

ip address: 192.168.10.1

subnet mask: 255.255.255.0

gatewa : 0.0.0.0

Physical Address: 000F.1EA0.01DD

Mac Aging time : 300(s)

Chip manufactures : CDKT

Chip Midel: HTTB

Chip Version: PNA14C03

Software Version:

Firmware Version:

Distance(m): 16(m)

llid: 1/1:1

cvlan: 1svlan: 0

Priority: 1

Automatic acquistion ip Address: No.

Binding mac: Yes

Onu status: Online

Registration Time: Thu Jan 1 09:10:30 1970

PTC88C(config-if-o1/1:1)#

2.5 Configure vlan for ONU port

Transparent mode


PTC88C(config-if-o1/4:3)# uni 1-4 vlan port mode transparent


Tag mode

PTC88C(config-if-o1/4:3)# uni 1-4 vlan port mode tag pvid 1000


9/12


2.6 Rate-limit

PTC88C(config-if-o1/4:3)# uni 1 rate-limit both enable

PTC88C(config-if-o1/4:3)# uni 1 rate-limit rx cir 10000 cbs 10000 ebs 0 /upstream speed 10M

PTC88C(config-if-o1/4:3)# uni 1 rate-limit tx cir 10000 pir 10000 /downstream speed 10M

2.7 open ONU port

PTC88C(config-if-o1/4:3)# uni 1 admin-status down /shutdown

PTC88C(config-if-o1/4:3)# uni 1 admin-status up /open


3.Other function

3.1 configure password

Effective immediately after change the password

PTC88C# cli-password 123456

3.2 change OLT name

PTC88C(config)# hostname EPON-OLT

3.3 reboot

PTC88C # reboot

This will reboot the device! If you do not save the settings, all changes made will be lost!

Are you sure you want to reboot the device?(y/n)Y

3.4 clear configuration

PTC88C# clear config-file

All user configuration will be deleted.

Are you sure?(y/n)

Y


10/12


3.5 Configure uplink port of OLT

Trunk mode



PTC88C(config-if-s1/1)# vlan port trunk add 100-200 /allow 100-200

PTC88C(config-if-s1/1)# vlan port trunk delete 100-200 /del vlan100-200

Access mode



PTC88C(config-if-s1/1)# vlan port pvid 1000

3.6 Configure PON port of OLT

Trunk mode


PTC88C(config-if-p1/1)# vlan port mode trunkPTC88C(config-if-p1/1)# vlan port trunk add 100-200

3.7 Configure SNMP

Trunk mode

PTC88C(config)# snmp-server community public rw //Set community public as Write and Read

PTC88C(config)# snmp-server host 172.10.0.254 //Set SNMP server IP address

PTC88C(config)#show snmp trap


11/12


3.8 Isolation

Isolation SNI Port


PTC88C(config-if-s1/1)#sni isolation enable

PTC88C(config-if-s1/1)#sni isolation disable // default isolation disable

Isolation PON Port


PTC88C(config-if-p1/1)# pon isolation enable // default isolation enable

PTC88C(config-if-p1/1)# no pon isolation

Isolation ONU Communicate


PTC88C(config-if-p1/1)# p2p mode full //ONU can communicate each other of 1 PON port

PTC88C(config-if-p1/1)# p2p mode disable //ONU can not communicate. default p2p disable

Isolation ONU Ethernet port


PTC88C(config-if-o1/1:2)# uni isolation enable // default isolation enable

PTC88C(config-if-o1/1:2)# uni isolation disable

3.7 Save Configuration

PTC88C# write


12/12


SPEC KT-PTC88C/2015-03-05 issue

SPEC TECHNOLOGY CORP.®

Telecom, CATV/ MATV DIVISION

Address: #1005, KLJ TOWER NORTH, NETAJI SHUABASH PLACE, DELHI-110034

Tel: 011-45640519, 20 EMAIL: [email protected]
mailto:[email protected]:[email protected]:[email protected]:[email protected]

Documents

PTC88C Easy Guide