Proline Prosonic Flow 93TPortable ultrasonic flowmeter for temporary measurement from outside the pipe

Flexible and economical• Ideally suited for the bidirectional flow measurement of liquids in pipelines (with or without liner)

• Robust clamp-on sensors

• Simple mounting thanks to the functional, industrial design

• Rapid and reliable commissioning thanks to the “Quick Setup”

• Software-independent data transfer from the integrated data logger to the PC

• Tried and tested FieldCare program for device configuration and measurement data visualization

Get to grips – temporary measurement from outsideAre you looking for a way to verify and optimize processes effi-ciently? Would you like to record the flow in pipelines – wherever and whenever you want? And without interrupting the process? If so, you can rely on the Prosonic Flow 93T completely and without question. This portable ultrasonic flowmeter impresses with its so-phisticated “clamp-on” technology. Flow quantities can be measured quickly and reliably, directly from the outside of the pipe.Prosonic Flow 93T is operated independently of the mains power using a powerful battery. The integrated data logger records all measured flow values safely. Values from other measuring instru-ments can also be imported and stored using the current input. These features are ideal for conducting verification measurements at existing flow metering points.

Try it for yourself!

IN016D/06/en/03.0971092469INDD 2.0

Technical data

Basic equipment

• Transmitter (Prosonic Flow 93T)• Battery charger• 1 USB memory stick (1 GigaByte)• Coupling medium (for perfect acoustic conductivity

between pipe and ultrasonic sensor)

Ordering options

Clamp-on sensor (Prosonic Flow P)• DN 15 to 65* (–40 to 100 °C or –40 to 150 °C) • DN 50 to 300* (–40 to 80 °C or 0 to 170 °C) • DN 100 to 4000* (–40 to 80 °C)

* incl. mounting set (holder, tension bands)

Connection cable (sensor/transmitter)• 5 metres long • 10 metres long Subject to modification

The Prosonic Flow 93T measuring system fulfills the EMC require-ments according to IEC 61000 and NAMUR. It also conforms to the requirements of the EU and ACMA directives and thus carries the and mark.

Measurement and evaluation made easyClamp on the ultrasonic sensors, connect the transmitter and record the flow. Transferring the measured values is just as easy:• Data transfer via USB memory stick on the laptop or PC,

e.g. for processing in Windows programs.• Data transfer via the Sensorbox onto the laptop or PC

for visualizing and evaluating measurement values using the Endress+Hauser FieldCare program.

Instruments International

Endress+HauserInstruments International AGKaegenstrasse 24153 ReinachSwitzerlandTel. +41 61 715 81 00Fax +41 61 715 25 00http://www.endress.cominfo@ii.endress.com