Product Part of Australia’s · 6 LYSAGHT Product Catalogue 2011-12 Apron flashing 3EEUNDER&LASHINGS Astragal See straps. Barge A finishing at the gable end of a roof, fixed parallel

1LYSAGHT Product Catalogue 2011-12

Part of Australia’s building heritage for over 150 years.

Product Catalogue 2011-12

2 LYSAGHT Product Catalogue 2011-12


Product Catalogue


Disclaimer, warranties and limitation of liability

This publication is intended to be an aid for all trades and professionals involved with specifying and installing LYSAGHT products and not to be a substitute for professional judgement.

Terms and conditions of sale available at local BlueScope Lysaght sales offices.

Except to the extent to which liability may not lawfully be excluded or limited, BlueScope Steel Limited will not be under or incur any liability to you for any direct or indirect loss or damage (including, without limitation, consequential loss or damage such as loss of profit or anticipated profit, loss of use, damage to goodwill and loss due to delay) however caused (including, without limitation, breach of contract, negligence and/or breach of statute), which you may suffer or incur in connection with this publication.

© Copyright BlueScope Steel Limited 15 December, 2010


Product TestingOur Research & Technology Department laboratory is NATA-registered and tests our products to ensure accuracy and reliability of our data.

Your suggestionsPlease send your suggestions for improvements to this publication to: The Publications Officer BlueScope Lysaght Research & Technology, 27 Sterling Road, Minchinbury NSW 2770

Product Descriptions All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained this catalogue, all technical literature and websites containing information from BlueScope Lysaght are approximations only. They are intended by BlueScope Lysaght to be a general description for information and identification purposes and do not create a sale by description. BlueScope Lysaght reserves the right at any time to:(a) supply Goods with such minor modifications from its drawings and specifications as it sees fit; and(b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.

WarrantiesThe LYSAGHT brand has been synonymous with the Australian building industry for over 150 years. With such a strong and proud Australian history, BlueScope Lysaght continue to manufacture high quality building products from 100% Australian steel.

Our continuing confidence in our products is shown in the unique warranties we offer.

We invite you to ask about the warranties applicable to your proposed purchase and the eligibility terms at your local LYSAGHT supplier.

Availability of productsIn most commercial aspects, refer to the relevant State price list to determine the details of the available product offer and service offer with regards to colour availability, product details and charges, including transportation and minimum order quantities.

Normally products are not shipped interstate, and while great care is taken to pack and ship our products so they arrive in excellent condition, it cannot be guaranteed how shipping may have affected the condition of products.

It is important that you ask your local BlueScope Lysaght representatives about the availability and delivery times for the products you want to use.

Product AvailabilityBlack areas on map indicate the product is in the region's product offer. However, in some regions product availability to subject to enquiry and minimum order quantities may apply. These have been indicated where this applies.

Unshaded areas on map indicate that the product is not available in that region.

AbbreviationsBMT = Base metal

thicknessMPa = MegaPascals (units

of pressure)CB = COLORBOND colours

on ZINCALUME steel or stainless steel

Cu = CopperGB = GALVABOND steel

unpaintedSS = Stainless steelZL = ZINCALUME steel

unpaintedMeasurements are millimetres, unless otherwise noted.

Further information-

erature, please visit our website: www.lysaght.com.

by contacting the STEEL DIRECT Technical Information Service on 1800 641 417.

LYSAGHT products.

LYSAGHT has been part of Australia’s architectural and building heritage, shaping so much of what’s been admired in homes and buildings throughout the country’s landscape. We're proud of our reputation for quality, integrity and expertise.

And since BlueScope Lysaght is part of BlueScope Steel, you know we stand behind the products we sell - year after year.

Our wide range of products and our experience are available to enhance your project. We hope you find this catalogue helpful.

ProductAvailability


Apron flashing

Astragal See straps.

Barge A finishing at the gable end of a roof, fixed parallel to the roof slope.

BRITEWITE® Painted underside of BONDEK to improve ceiling appearance.

BMT Base metal thickness

Box gutter A gutter not at an eave, typically at the base of two opposing roof slopes.

Capping A cover at the top of a gap that weatherproofs, typically at the ridge of a pitched roof.

Chimney gutter - Soaker flashing

Cladding Sheeting that encloses a building — roofing and walling.

COLORBOND® Pre-painted aluminium-zinc coated steel sheeting.

Concealed-fastened A method of fixing cladding by means of hidden, fixing clips or brackets (sometimes called secret fixing).

Downpipe A pipe to carry roof water from gutters and roof catchments to drains or storage tanks.

Drop See pop.

Eaves gutter A roof gutter attached at an eaves overhang.

Elbow A fitting used in a downpipe, to change direction of the downpipe by about 90 degrees.

Electrolytic (galvanic) corrosion Corrosion resulting from the contact of two different metals when an electrolyte (like water) is present.

Expansion joint A joint in a long run of cladding, gutter or flashing designed to allow for thermal expansion and contraction.

Fall (slope) The slope of the roof or gutter, often expressed in degrees, or as a ratio of vertical height to horizontal distance (e.g. 1 in 20).

Fascia (fascia board) A board, or rolled metal product of similar dimensions, fixed along the eaves, to which a gutter is secured.

Fixings Screws, nails or clouts used to fasten cladding to a building structure.

Flashing A material, usually metal, used to waterproof the junction between two intersecting roof and/or wall surfaces. At a masonry wall, it is often built into the mortar.

Apron flashing A horizontal flashing installed where the top end of a roof slope meets a vertical projection, such as a chimney or parapet wall.

Counter (or over) flashing A flashing dressed down as a cover only, over a separate upstand.

Hanging flashing side, front or back cover piece used to prevent entry of water between abutting surfaces and other gutters, flashings and soakers.

Soaker flashingdesigned to weatherproof the perimeter of roof protrusions or penetrations. Soaker flashings are usually positioned under rather than over the surrounding metal roof.

GALVASPAN® Galvanised steel sheeting protected against corrosion by a zinc coating applied by the continuous hot-dip process.

Girth The width of the blank strip from which a profile is rolled (usually refers to gutters and flashings).

Gutter A channel that collects roof water and carries it to an outlet.

Mansard A roof built at two pitches, the steeper pitch commencing at the eaves and the flatter pitch finishing at the ridge.

Nozzle See Pop.

Offset A pipe fitting that directs a downpipe from the gutter, under the eaves soffit and down a wall.

Oilcanning Variation from flatness of sheet metal, creating undulations along the surface. The result is poor appearance and potential ponding.

Pan The flat portion between the ribs in a pan-type pre-formed sheet.

Parapet A wall on the perimeter of a building that projects above the line of the eaves.

Penetration A projection through the roof, e.g. vent pipe, chimney or rooflight.

Pierce-fastened A method of fixing cladding by means of a screw or nail which pierces the cladding.

Pitch see fall.

Ponding Pooling of undrained water on a roof.

Pop A short fitting in a gutter sole, where rainwater leaves the gutter.

Rainhead A box-shaped receptacle sometimes used between gutters and downpipes to provide an external overflow point.

R-value A value given for the resistance to heat transfer of a roof or wall system.

Rib A longitudinal upstand in cladding.

Ridge capping to weatherproof the junction at the apex of opposing roof slopes.

Saddle strap See straps.

Sarking A membrane to collect and discharge clear of the structure any water that may penetrate a roof or wall cladding.

Shoe A fitting used in a downpipe, to change direction of the downpipe by about 45 degrees.

Soaker (gutter) A small gutter located on the upper side of a chimneystack.

Soaker (flashings) See under flashings.

Sole The internal, bottom surface of a roof gutter.

Spigot See Pop.

Spreader A downpipe-tee or elbow fixed at 90 degrees to the roof slope used to spread stormwater over a greater area of the roof.

Spouting See Gutter.

Straps A metal band used to secure a downpipe to a wall.

Sump A roof gutter pit used to connect downpipes to internal roof gutters.

Trays See Pan.

Thermal stress Stress due to expansion and contraction caused by changes in temperature.

THERMATECH® Innovative new paint technology which improves thermal performance of roof and wall claddings.

Valley boards Timber or profiled metal laid under a valley gutter to support it.

ZINCALUME® Steel sheeting protected against corrosion by an aluminium-zinc coating.

Glossary of terms


ContentsROOFING 1

General notes on cladding 8CUSTOM ORB® 9CUSTOM BLUE ORB® 9Curved flashings 10Bullnose order form 11INTEGRITY® 820 12 KLIP-LOK® 700 HI-STRENGTH 13KLIP-LOK® 406 14KLIP-LOK CLASSIC® 15 LONGLINE® 305 16LONGLINE® 305 Tapered 16 SPANDEK® 17SPANRIB® 17 TRIMDEK® 18

® 19

WALLING EASYCLAD® 20EASYCLAD® EH300 21MULTICLAD® 21MINI ORB® 22 PANELRIB® 23TRIMWALL® 23WALLCLAD® 24Weatherboard 24

RAINWATER PRODUCTS 25

Flashings & CappingsStandard flashings & cappings 25Non-standard flashings, cappings, gutters 28 Fascias, Gutters & Downpipes NOVALINE® fascia system 29NOVALINE® rebate fascia 29 NOVALINE® fascia cover 29EMLINE® gutter 30TRIMLINE® gutter 30SHEERLINE® gutter 31Quad 150 & 175 gutter 32Hi-front Quad gutter 33Lo-front Quad gutter 33LYSAGHT OGEE® gutter 33Half-round gutter 34

® gutter 34RANCELINE® gutter 35COLONIAL® gutter 35Custom W.A. gutters 35Downpipes: Square & rectangular 36Pops 36Elbows & Shoes 37Downpipe Offsets 37Downpipes: Round 38Pops/Nozzles/Drops 39Elbows/Shoes/Straps 39Downpipe Offsets/Crimped Bend 40Standoff Brackets/Chinamans Hat 40

ACCESSORIES 41

Accessory sheet 41Ant caps 41 Box gutter brackets 41 Box gutter sumps 41Box gutter expansion joints 41 Dektite® pipe flashings 41

Insulation: Reflective foil laminate 41Insulation: Building blanket with foil 41Insulation: Building blanket 41Insulation: Ceiling batts 41Insulation: Wall batts 41

Lapseal 41 Louvres 41 Rainwater heads 43 Roof infill strips 41 Safety mesh 41 Silicone sealant 42Soft zinc flashing 42Strapping (coils) 42 Transitions, roof collars & overflows 43 Translucent sheeting 42 Tools (turn-up & turn-down) 42Ventilated ridges 42Ventilators: Industrial & Domestic 42Weatherlok® washers 42

STRUCTURAL PRODUCTS 54

Zeds & Cees (Purlins & Girts) 54LYSAGHT SA Cee Section 54SUPAPURLIN®:SUPAZEDS® & SUPACEES® 55Dimensions of SUPAZEDS® & SUPACEES® 56Hole Gauge Lines 57Purlin accessories 57HOOK-LOK® II bridging system 59Series 300 and 350 bridging system 60

TOPSPAN® light steel sections 62Associated top hat products 62Structural Steel decks 63POWERDEK® 63

BONDEK® and accessories 64Cold-formed sections: Standard 65Handy-C system 65INTERLOK® II 66INTERLOK® II stair treads 66 Handiplank® 66

HOUSE FRAMING 67

SUPRATRUSS® - components 67®- components 68

SMARTRUSS® 70® 71

FENCING 72

MANDALAY® fence 74

Gate Options 76

HOME IMPROVEMENTS 78

LYSAGHT Living Collection® 78® 79® II 79® beams 80

Patio post 81

INDEX 82 MAINTENANCE & WARRANTY INFORMATION 84 Cladding and Rainwater goods 84

SERVICE & SUPPORT 86

LYSAGHT Website, Call Centre, R&T Dept. 86


Where appropriate, the following specifications apply to our roofing and walling products.

MaterialsZINCALUME® aluminium/zinc alloy-coated steel complying with AS 1397—2001ZINC HI-TEN® zinc-coated steel complying with AS 1397—2001

Type 430; UNS No. S43000 COLORBOND® prepainted steel complies with

AS/NZS 2728:2007.

TestingOur products offer the full benefits of the latest methods for modelling wind pressures. Wind pressure capacity tables are determined by full-scale tests conducted at BlueScope Lysaght’s NATA registered testing laboratory, using our direct pressure-testing rig.We also test for concentrated loading (foot traffic) and spring curving.

Metal & timber compatibilityContact with, or run-off from, some materials can damage coated steel products. Buildings can also be susceptible to condensation on inside surfaces.The materials include certain metals, treated timbers and chemicals.Incompatible materials include:

COLORBOND® stainless cladding)

treatments)

have excessive moisture content (such as improperly-seasoned timber)

atmosphere

incompatible materials.

materials onto coated steel products.

coated steel products or, alternatively, appropriately coated.If there are doubts about the compatibility of other products being used, refer to the current edition of the LYSAGHT Roofing & Walling Manual or seek advice from our information line.

General notes on cladding


Clad

ding

762mm cover(10.5 corrugations)

Overlap Underlap16mm

762mm cover (10.5 corrugations)or

608mm cover (8 corrugations)

17mmOverlap Underlap

LYSAGHT CUSTOM ORB® is the famous Australian corrugated profile. CUSTOM ORB is equally at home with traditional and contemporary designs. It is available in two base metal thicknesses, and is fixed with ease and speed.

Use CUSTOM BLUE ORB for curving.

See also LYSAGHT WALLCLAD for walling applications.

Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.42 & 0.48mm

LengthsLengths are custom cut. Check maximum and minimum with your supplier.

Mass (COLORBOND)BMT 0.42mm: 4.35 kg/m2

BMT 0.48mm: 4.93 kg/m2

TolerancesLength: + 10 mm, – 10mm Width: + 4 mm, – 4mm

Minimum roof pitch5 degrees (1:12)

Materials compatibility, standards & testingSee Page 1

FinishesA wide range of COLORBOND® steel colours, COLORBOND® metallic, COLORBOND® stainless, and unpainted ZINCALUME® steel.COLORBOND Metallic is available in 0.48mm subject to enquiry. COLORBOND Stainless is available in 0.42mm subject to enquiry.

LYSAGHT CUSTOM ORB

LYSAGHT CUSTOM BLUE ORB® is the curving quality, corrugated profile, famous throughout Australia.

There are two base metal thicknesses, and two widths with 762mm cover being the standard product. In NSW, 608mm cover is subject to enquiry. In WA, 608mm cover is not available. Check in your state for finish and cover width.

Use CUSTOM ORB for applications other than curving.

Base materialsSteel grade: G300 Coating: AZ150 or Z600 BMT: 0.60mm



BMT 0.80mm is available subject to enquiry and minimum order quantities apply.

TolerancesLength: + 10mm, – 10mm Width: + 2mm, – 2mm



CurvingSee next page for flashings and order form on the following page.

Finishes & coverUnpainted ZINCALUME® steel:608 & 762mm cover.Wide range of COLORBOND®

steel colours: 762mm coverTanks AQUAPLATE® steel: 608 & 762mm cover 8 & 10 corrugation CUSTOM BLUE ORBUnpainted zinc galvanised: 608 & 762mm cover

Some areas only stock the 762mm cover. Please refer to your local centre for availability.

LYSAGHT CUSTOM BLUE ORB

Standard width is 762mm.

ProductAvailability

ProductAvailability

Roof Claddings


Curved flashingsCurved flashings and cappings are made in fibreglass, plastic and COLORBOND® steel colours. Straight flashings and cappings are also made to match. Different states stock different materials and different lengths — ask your local supplier.ColoursColours are available to match COLORBOND® steel standard colour range - refer to your local branch for availability.

Concave

Convex Cyma recta

Ogee

180Barrel vault

Bullnose

Cranked double curve Pre-curved or cranked ridge

Custom Blue OrbTypes of curve

Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods

Translucent sheeting

Material is non-metallic fibre to suit bullnose curve. (Right hand illustrated.)

ProductAvailability


Roof

ing

Bullnose order form

1 CUSTOMERCustomer

Order number

Delivery address

2 DATANumber of sheets required

Topside colour (or finish)

Direction of laying (see FRONT VIEW in right-hand column)

Left to right

Right to left

Does the bullnosed sheet end-lap onto a straight sheet?

Yes

No

Have you supplied a template? (Preferred method)

Yes

No

3 DIMENSIONS

Straight roof section ‘SR’

mm (in WA 75mm)

Straight vertical section ‘SV’mm (100mm min., 80mm in Vic.)

Radius ‘R’

mm (300 min., 400 minimum in Qld & 400 minimum in W.A.)

Roof pitch ‘P’

degrees (5° min.)

Awning width ‘A’

mm

Height less straight vertical ‘H’

mm

BlueScope Lysaght use only Curved length Straight roof section Straight vertical section Total length of sheet ‘SR’ ‘SV’ for manufacture

mm mm mm mm

Pass length Nip depth Pass reduction

Stra

ight

ver

tical

sect

ion

'SV

'Se

e be

low

for

min

.

Awning width 'A'

Straight roof section 'SR'

Roofpitch'P' Radius 'R'

See below for min.

'H'

Left sideoverlap

Right sideoverlap

CROSS SECTION

FRONT VIEW

MaxMin

Overlap

Overlap


LYSAGHT INTEGRITY 820

INTEGRITY 820® is a versatile cladding designed for commercial and industrial applications, where fast and simple installation is a prime requirement.

The fasteners pierce the sheeting, however the unique design guarantees exceptional waterproofness on a par with concealed-fix products like KLIP-LOK 700 HIGH STRENGTH®.

Note: INTEGRITY 820 is available by enquiry only and minimum order quantities apply.




BMT 0.48mm: 5.3 kg/m2


Minimum roof pitchBMT 0.42: 2 degrees BMT 0.48: 1 degree

FinishesA range of COLORBOND® steel colours, and unpainted ZINCALUME® steel.


Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods


Integrity optional�Style capping strip

�

Integrity sealing plate�for fasteners

ProductAvailability

820mm cover

48mm


Roof

ing

LYSAGHT KLIP-LOK 700 HI-STRENGTH

LYSAGHT KLIP-LOK 700 HI-STRENGTH® cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.

The concealed fastening system allows KLIP-LOK 700 HS to be used on roofs as low as 1 degree pitch.

KLIP-LOK 700 HS is commonly used on industrial and commercial jobs, but also gives a clean modern look on houses.

KLIP-LOK 700 HS is available as a long-length on-site rollformed product. Contact your local sales office for details.

Base materialsSteel grade: G550 Coating: AZ150 BMT KLIP-LOK 700 HS: 0.42, 0.48 & 0.60mm*

LengthsLengths are custom cut. Check maximum and minimum with your supplier.KLIP-LOK 700 HS is also available in long lengths with our on-site rollforming capability.Contact your sales representative for details.

Mass (COLORBOND)

KLIP-LOK 700HS: BMT 0.42mm: 4.74 kg/m2

BMT 0.48mm: 5.17 kg/m2

BMT 0.60mm*: 6.63 kg/m2

*Available from mobile rollformer only.

TolerancesLength: + 0mm, – 15mmWidth: + 4mm, – 4mm

Minimum roof pitchBMT 0.42: 2 degrees Other BMT: 1 degree


KLIP-LOK 700HS, COLORBOND Metallic is available in 0.48mm subject to enquiry.COLORBOND Stainless is available in 0.42mm subject to enquiry.

Number of clips Number of clips = (number of purlins) x (number of sheets +/-1)

Materials compatibility, standards & testingSee Page 1.

Mobile rollforming for KLIP-LOK 700 HI-STRENGTH is available in any state, subject to enquiry.

LYSAGHT KLIP-LOK clip (availability as above)

700 mm cover

43 mm

KLIP-LOK 700 Hi-strength

KL-700HS clip(For KLIP-LOK 700 Hi-Strength)

ProductAvailability


LYSAGHT KLIP-LOK 406

LYSAGHT KLIP-LOK 406 HIGH WIND

LYSAGHT KLIP-LOK® 406 cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.

The concealed fastening system allows KLIP-LOK 406 to be used on roofs as low as 1 degree pitch.

KLIP-LOK is commonly used on industrial and commercial jobs, but also gives a clean modern look on houses.

In the Northern Territory it is known as KLIP-LOK 406 High Wind, and is cyclonically rated when pierce-fixed with cyclonic screw assemblies.

Contact your local sales office for details.

Base materialsSteel grade: G550 Coating: AZ150 BMT KLIP-LOK 406: 0.42, 0.48 & 0.60mm

In Northern Territory: Steel grade: G300 BMT KLIP-LOK 406: 0.55mm (standard) 0.70mm (for extreme applications)

LengthsLengths are custom cut. Check maximum and minimum with your supplier. Mass (COLORBOND)KLIP-LOK 406: BMT 0.42mm: 5.03 kg/m2

BMT 0.48mm:* 5.71 kg/m2

BMT 0.60mm*: 7.04 kg/m2


Minimum roof pitchBMT 0.42: 2 degrees Other BMT: 1 degree

FinishesIn NT, ZINCALUME® steel is standard. Colours in project quantities only.A range of COLORBOND® steel colours, and unpainted ZINCALUME® steel.



KLIP-LOK 406 High Wind is made locally in NT.

KL-406 is made in NSW.

* Available in WA. All other BMTs subject to enquiry.

LYSAGHT KLIP-LOK 406 accessories

406 mm cover

41 mm

KLIP-LOK 406

KL65

KL-65 clip(For KLIP-LOK 406)

Rib cap8 degrees for KL-406

(ZINCALUME®)(Not available in NSW)

ProductAvailability

Subject to enquiry in Qld & WA


Roof

ing

LYSAGHT KLIP-LOK CLASSIC

LYSAGHT KLIP-LOK CLASSIC® cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.

The concealed fastening system allows KLIP-LOK CLASSIC to be used on roofs as low as 1 degree pitch.

KLIP-LOK CLASSIC is commonly used on industrial and commercial jobs, but also gives a clean modern look on houses.

Subject to enquiry in NT. Contact your local sales office for details.

Base materialsSteel grade: G550 Coating: AZ150BMT KLIP-LOK CLASSIC: 0.42 & 0.48mm

LengthsLengths are custom cut. Check maximum and minimum with your supplier.Contact your sales representative for details.

Mass (COLORBOND)

KLIP-LOK CLASSIC: BMT 0.42mm: 4.34 kg/m2

BMT 0.48mm: 4.91 kg/m2


Minimum roof pitchBMT 0.42: 2 degrees BMT 0.48: 1 degree

FinishesA range of COLORBOND® steel colours, and unpainted ZINCALUME® steel. COLORBOND® Metallic is also available.



LYSAGHT KLIP-LOK CLASSIC clip

Cover width 700mm

40mm

KL-Classic clip(For KLIP-LOK CLASSIC)

KLIP-LOK CLASSIC

ProductAvailability

CLASSIC


LYSAGHT LONGLINE 305 (Subject to enquiry in Qld, SA & W.A.)

LONGLINE 305® is a long-standing favourite that accentuates clean straight lines with narrow ribs and smooth pans.This is a very versatile profile that can be tapered in its width (see below).

Base materialsSteel grade: G300 Coating: AZ150 BMT: 0.70 mm


Mass (COLORBOND)BMT 0.70 mm: 9.81 kg/m2


Minimum roof pitch1 degree (1:60)

FinishesA limited range of COLORBOND® steel colours and unpainted ZINCALUME® steel.


Made in NSW.

Clips for LONGLINE

LYSAGHT LONGLINE 305 Tapered (Subject to enquiry in Qld, SA, W.A.)

Standard width(cover 305 mm)

Width reducedby approx. 12.5%

Width reducedby approx. 25%

LONGLINE 305 tapered

Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods


305mm cover

48mm

We can taper LONGLINE 305 in its width to produce a sheet that lends itself to a wide range of roof designs. The taper can be left-hand or right-hand (please seek advice upon ordering). You should seek advice on the available tapers for long spans, minimum lengths and high loadings.

ProductAvailability

ProductAvailability

Top fixing clipStarting/finishing clip

Cut clip across big holeand discard section shown

with dashed line


Roof

ing

Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods


LYSAGHT SPANDEK® is a contemporary-looking trapezoidal profile which is ideal where a stronger, bolder more modern corrugated appearance is required. User to specify roof or wall use.




BMT 0.48mm: 5.37 kg/m2


FinishesA range of COLORBOND® steel colours and unpainted ZINCALUME® steel.

COLORBOND® metallic is available subject

COLORBOND® stainless is available subject to enquiry.



LYSAGHT SPANDEK

700mm cover

24mm

LYSAGHT SPANRIB® cladding system provides the benefits of long spanning, pierced-fix cladding, with excellent rainwater carrying capacity.

All overlapping ribs have specially formed capillary grooves to prevent water entering at the side laps.

It has been designed for commercial and industrial applications where long span and fast installation are major requirements.

Each sheet requires only four (4)fasteners per square metre, so installation is very fast and less costly.

Available subject to enquiry. Minimum order quantities apply.

Base materials Steel grade: G550 Coating: AZ150

Stainless Steel AISI/ASTM Type 430; UNS No.:S43000 BMT: 0.42mm or 0.48mm. Stainless is subject to enquiry.

Lengths

Lengths are custom cut. Check maximum and minimum with your supplier.

Mass (COLORBOND)

0.42mm 4.35 kg/m2

0.48mm 4.93 kg/m2

Tolerances

Length: + 0mm, – 15mm Width: + 4mm, – 4mm

Minimum roof pitch

BMT 0.42: 2 degrees (1:30) BMT 0.48: 1 degree (1:50) ColoursA range of COLORBOND® steel colours, and unpainted ZINCALUME® steel.

Materials compatibility, standards & testing See Page 1

LYSAGHT SPANRIB (Enquiry in Qld & NSW)

ProductAvailability

ProductAvailability

820mm cover

48mm


LYSAGHT TRIMDEK

LYSAGHT TRIMDEK® is a stylish, ribbed profile with subtle fluting in the pans to provide strength and long spanning capabilities. Equally suitable for domestic, industrial and commercial applications.

See also LYSAGHT TRIMWALL for wall cladding applications.



Mass (COLORBOND)BMT 0.42: 4.35 kg/m2

BMT 0.48: 4.96 kg/m2


FinishesA range of COLORBOND® steel colours and unpainted ZINCALUME® steel. COLORBOND Metallic is available in 0.48mm subject to enquiry.COLORBOND Stainless is available in 0.42mm subject to enquiry.



Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods


762mm cover

29mm

ProductAvailability


Roof

ing

LYSAGHT ROOFTRAK® provides a

safe and stable surface for incidental access on ‘flat’ roofs. It may be installed parallel or at 90° to the ribs of roofing sheets.

There are male-male and male-female planks, as well as blanking plates, support and end plate brackets.

If you want to use 450, check that

your regulatory authority allows this width because it is narrower than the minimum provided for in AS-1657—1992.

Supplied in kits is supplied

in kits that include components and fixings.

Dimensions The basic ‘plank’ nominally (225 mm wide x 65mm high) is configured as:

450 (two planks = 450mm wide); or

675 (three planks = 675mm wide).

Lengths

MaterialZinc-coated steel to AS1397, G300, Z450 (300 MPa minimum yield stress, 450 g/m2 minimum coating mass). BMT = 1.2mm

ComponentsA = Plank (male-male) standard lengths 3m* or 6m*B = Plank (male-female) standard lengths 3m* or 6m*C = End Plate (Blanking plate)D = Support bracketE = L bracket

* 3m = 3.018m and 6m = 6.073m

Male-male plank Male-female plank

65 m

m

65 m

m

225 mm(nominal)

225 mm(nominal)

Kit Description

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 675

F

RT450 shown. For RT675, add a 2nd male-female plank.

ProductAvailability


LYSAGHT EASYCLAD (Subject to enquiry in WA)

It's called EASYCLAD® because it's easy to use and install on walls, soffit linings, ceilings, infill panels and screens. The profile provides the illusion of timber siding, with the strength of steel.It is not intended for roofing.

Simple (CD40) clips are used for fixing the start of the first sheet. Subsequent sheets are nailed or screwed. There is a wide range of trim sections.



Mass (COLORBOND)4.5 kg/m2

TolerancesLength: + 0 mm, – 15 mm Width: + 3 mm, – 3 mm



Made in NSW. Available as fluted product as standard. Unfluted is available on request.

EASYCLAD TRIMSCustom sections can be made to order.

CD5 External corner trim

28

28

28

28

CD24 Internal corner CD23 External corner

C

C

38

38 38

38

CD6 Internal corner CD5 External corner

C

C

Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods


300 mm cover

19 mm

2PF 300

ProductAvailability

Wall Claddings


Wal

ling

LYSAGHT MULTICLAD® is a walling profile with a small trapezoidal rib. Its most common applications are as walls of sheds and garages.




BMT 0.42mm: 3.9 kg/m2



BMT COLORBOND® stainless is also available subject to enquiry.


LYSAGHT MULTICLAD (Subject to enquiry in WA)

Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods


840 mm cover

12 mm

ProductAvailability

LYSAGHT EASYCLAD EH300

EASYCLAD EH300® is used for walls, soffit linings, ceilings, infill panels and screens. It is not intended for roofing. It is available only in the Northern Territory.

The trims available in the Northern Territory are CD1, CD4, CD6 AND CD27. (See previous page.)






Materials compatibility, standards & testing See Page 1

Made in Darwin.

300 mm cover

14 mm

ProductAvailability


ProductAvailability

LYSAGHT MINI ORB

MINI ORB® is a corrugated sheet with reduced height of corrugation to the more traditional CUSTOM ORB profile. It is suitable for interior and exterior applications; on straight or curved surfaces; with the corrugations running vertically or horizontally.

This product is not suitable for roofing.

Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.42 & 0.48mm (NSW 0.48mm by request only) (NSW & Qld 0.48mm metallic only available) (0.48mm n/a in SA)



BMT 0.48mm: 4.51 kg/m2

(0.48mm n/a in VIC)

TolerancesLength: +0mm, – 15mm Width: +2mm, – 2mm

Finishes A range of COLORBOND® steel colours and unpainted ZINCALUME® steel. Double-sided 0.35mm COLORBOND® steel available on request. Materials compatibility, standards & testingSee Page 1

MINI ORB TRIMS

Custom sections can be made to order. (Trims not available in W.A., subject to enquiry in S.A.)

25

15 15

20 20

48

12

12

1833

20

28

28

38

38

28

28

38

38

CD20 Butt joint trim-Top hat

CD6 Internal corner CD5 External cornerCD22 Edge trim

CD21 Butt joint trim-Overlap CD24 Internal corner CD23 External corner

(Subject to enquiry in SA)

C

C

C

C

C

C

C= coloured face

28

22

17 15

28CD3 Fascia to soffit section CD5 External corner trim

3815

20

22

CD27 Fascia to soffit section

25

2810

28CD4 Feature section soffit

820mm cover

6mm


Wal

ling

LYSAGHT TRIMWALL® has trapezoidal ribs and pans that match LYSAGHT TRIMDEK. It is used for walls, primarily on sheds.

Sheet coverage is the same as that of LYSAGHT TRIMDEK.

Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.35mm


Mass (COLORBOND)BMT: 0.35 mm: 3.60 kg/m2


FinishesA range of COLORBOND® steel colours, and unpainted ZINCALUME® steel.Limited colour range in W.A.


LYSAGHT TRIMWALL

762 mm cover

29 mm

ProductAvailability

LYSAGHT PANELRIB

LYSAGHT PANELRIB® is a lightly fluted wall cladding or ceiling for exterior and interior use, on straight or curved surfaces.

Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.35 & 0.42 mm


Mass (COLORBOND)BMT 0.35 mm: 3.2 kg/m2

BMT 0.42 mm: 3.8 kg/m2



COLORBOND® stainless is also available subject to enquiry.


850 mm cover

4 mm

ProductAvailability

Remember

Accessories

Cappings

Curved flashings

Insulation

Rainwater goods



LYSAGHT WALLCLAD

LYSAGHT WALLCLAD® is a walling product to compliment LYSAGHT CUSTOM ORB and LYSAGHT CUSTOM BLUE ORB.

The sheet coverage matches that of LYSAGHT CUSTOM ORB.







762 mm cover

16 mm

LYSAGHT Weatherboard

LYSAGHT Weatherboard is a walling product that matches traditional weatherboard.

your local BlueScope Lysaght office.







ProductAvailability

ProductAvailability


LYSAGHT Standard flashings & cappings

70

200

10

20160

New South WalesBarge cappingCUSTOM ORB & BLUE ORB

TRIMDEK & SPANDEK

KLIPLOK

70

190

10

30120

70

180

10

40120

Barge roll

50dia.

2400 mm length only

Ridge capping*Nominate roof pitch

CUSTOM ORB & BLUE ORB

TRIMDEK & SPANDEK

KLIPLOK

CUSTOM ORB & BLUE ORB

100 18020

160

100 17030

120

100 16040

120

10

230140 20

*Nominate angle

10

220140 30

10

210

deg˚

140 40

190

50 160 20

2400 mm length only

Barge roll capping

Spear point

180180

30 30120˚

170170

30 30120

160160

40 40120

50

127

19300

127

19

Tile flashingCUSTOM ORB & BLUE ORB

TRIMDEK & SPANDEK

KLIPLOK & INTEGRITY 820

2020

180180180180

140210 210

145145

145

545

Valley flashingValley flashing

Ribbed valley

Structural valley

Valley support

Barge gutter

deg˚

deg˚

120˚

120˚

120˚

120˚

120˚

120120˚

120˚

Apron flashingCUSTOM ORB & BLUE ORB

TRIMDEK & SPANDEK

KLIPLOK & INTEGRITY 820

160

*

*

*

*

145º

140º

*

*

*

*

Remember

Accessories

Gutters

Non-standard flashings

ProductAvailability

ProductAvailability

Rain

wat

er G

oods



25 25120

120

50

310

ProductAvailability

ProductAvailability



100

KLIP-LOK Barge

10

294

º

º

º

º

550 or 770mm wide

150º

150

701010

SPANDEK & TRIMDEK

SPANDEK & TRIMDEK

Remember

Accessories

Gutters

Non-standard flashings

ProductAvailability

ProductAvailability

Rain

wat

er G

oods


LYSAGHT Non-standard flashings, cappings & gutters

A

B C

D

E

F

G HA

A

A

A

A

A

A

A

A

A

A

A

A

B

B

B

B

B

B

B

B

B

B

B

B

B

C

C

C

C

C

C

C

C

C

C

C

C

C

D

D

D

D

D

D

D

D

D

D

E

E

E

Profile typesType 1 (CF1)

Type 2 (CF2)

Type 3 (CF3)

Type 4 (CF4)

Type 5 (CF5)

Type 6 (CF11)

Type 7 (CF12)

Type 8 (CF13)

Type 9 (CF14)

Type 10 (CF15)

Type 11 (CF31)

Type 12 (CF32)

Type 13 (CF33)

Type 14 (CF35)

Order requirementsOn a sketch show1. Profile type2. Colour (or ZINCALUME

steel, or GALVABOND if not COLORBOND steel)

3. Side on which colour is to be (use letters shown below)

4. Dimensions (use letters shown below)

5. Angles on all bends that are not 90 degrees

6. Quantity and lengths

PreliminaryCheck with your local BlueScope Lysaght office for:

1. Available girth range2. Available colours3. Profiles not shown4. Maximum lengths5. Lead times6. How to handle

tapered flashings

Order example

2. Wilderness

3. Colour on ‘B’ side

4. A = 40, B = 80, C = 18

5. Angle B–C = 135 degrees

6. 4 of 2750 mm

This page shows some non-standard profiles. Please ask your local LYSAGHT office for other options.

egnarhtriG )mm(

00600105700200900300010040021005

(Up to 400mm girth)

Order example

2. Wilderness

3. Colour on ‘B’ side

4. A = 40, B = 80, C = 18

5. Angle B–C = 135 degrees

6. 4 of 2750 mm

ProductAvailability


LYSAGHT NOVALINE® fascia systemLYSAGHT NOVALINE® is a fascia system that integrates with most of our gutters. It comprises:

The fascia A metal fixing bracket One of many gutters A spring clip that clips the gutter to the fascia An overstrap that adds support to the gutter

NOTE: In WA a NOVALINE REBATE fascia is also available.

AvailabilityNOVALINE fascia is available in all states, though the Western Australian fascia has a different profile, and the following restricted accessories:

External and internal corners

Spring clips Stop ends (End closer) Splice plates

Compatible gutters EMLINE

Quad 125 Quad 150 Square Bead Quad TRIMLINE LYSAGHT Ogee RANCELINE Colonial 1/4 round

FinishesCOLORBOND® steel colours

NOVALINE fascia accessories

(45º not in NSW)(Not in WA) (Not in WA)

AbbreviationsCB = COLORBOND® colours

on ZINCALUME® steelGB = GALVABOND® steel

unpaintedZL = ZINCALUME® steel

unpainted

Not all NOVALINE fascia accessories are available in all markets. Consult with your local distributor for availability in your region.* Multi purpose fascia bracket can be bent 90º to attach to a wall.

18mm

35mm

185mm

StandardNovaline

RebatedNovaline(WA only)

20mm

37mm

176mm

101mm

32mm

LYSAGHT NOVALINE fascia cover

35

177

NOVALINEfascia cover

Put a bright new surface onto your tired old fascias.

The NOVALINE fascia cover has the ability to cover warped or weathered timber, peeling paint or discoloured wood so the fascia appears smooth and attractive.

NOVALINE fascia covers are designed to go over your existing fascia boards, so all these unattractive problems are totally concealed.

They are compatible with most NOVALINE fascia accessories and will mount the same range of gutters.

Availability

Victoria & NSW only

FinishesCOLORBOND® steel colours

Victoria NSW

ProductAvailability

ProductAvailability

ProductAvailability

Rebate NOVALINEfascia

NOVALINEfascia

35

175

NOVALINEfascia cover

Rain

wat

er G

oods


LYSAGHT EMLINE gutter

LYSAGHT EMLINE® gutter is concealed-fixed, and is compatible with NOVALINE fascia.

It is available slotted or unslotted.

BMT = 0.42mm

A range of COLORBOND® colours is available.

EMLINE capping is available for trimming roof edges at barges.

LYSAGHT TRIMLINE® gutter is concealed-fixed, and is compatible with NOVALINE fascia. It is available slotted or unslotted. BMT = 0.42 mm. A range of COLORBOND® colours is available.

Dimensions in NSWA = 73 mm (nominal) B = 117 mm (nominal) C = 124 mm (nominal)

Note: Availability in NSW is subject enquiry.

Dimensions in Victoria & TasmaniaA = 72 mm (nominal) B = 116 mm (nominal) C = 124 mm (nominal)

Dimensions in QldA = 70 mm (nominal) B = 116 mm (nominal) C = 124 mm (nominal)

LYSAGHT TRIMLINE gutter

140

mm

89 m

m

125 mm

140

mm

89 m

m

125 mm

A

C

B

Remember

Accessories

Downpipes




unpainted

TRIMLINE gutter accessories

TRIMLINE capping Overstrap(Not available in NSW) ZLCB & ZL

Stop endCB & ZL

GP internal bracketZL

30mm

124mm

125mm

Capping

EMLINE gutter accessories

Emline capping OverstrapCB & ZL ZL

Stop endCB & ZL

GP internal bracketZL

30mm

140mm

125mm

Capping

ProductAvailability

ProductAvailability

Also available Northern NSW


Rain

wat

er G

oods

LYSAGHT SHEERLINE gutter

LYSAGHT SHEERLINE® gutter is concealed-fixed, and is available slotted or unslotted. It is favoured by some, for high-profile roofing (e.g. KLIP-LOK) laid at low pitches. Particularly good in home improvement applications. BMT = 0.42mm (Vic. & Tas.)BMT = 0.50mm (NSW)BMT = 0.55mm (NSW, SA & NT)

Standard and high-gloss COLORBOND® steel colours are available.

The slotted product is not available in Western Australia.

SHEERLINE capping is available for trimming roof edges at barges.

Dimensions other than in South or West AustraliaA = 81 mm (nominal) B = 141 mm (nominal) C = 124 mm (nominal)

Dimensions in South AustraliaA = 72.5 mm (nominal) B = 141 mm (nominal) C = 124 mm (nominal)

Western AustraliaStock lengths are 7 metres, or custom cut lengths up to 8 metres.

COLORBOND® and unpainted ZINCALUME®.A=83mm (nominal)B=140mm (nominal)C=127mm (nominal)

A

C

B

SHEERLINE gutter accessories

Capping General purpose bracket SGCI gutter clip ZL & CB ZL ZL Not available in WA

External end stop Internal end stop ZL & CB ZL & CB Fascia style No flutes in WA product Not available in WA Sold in pairs in NSW Sold in pairs in NSW

Remember

Accessories

Downpipes




unpainted

(SHEERLINE is not available with a return in SA)

Also available:J strap or overstrap; Ext mitre.

These accessories are also suitable for CUSTOM ORB, CUSTOM BLUE ORB, SPANDEK and TRIMDEK.

ProductAvailability


LYSAGHT QUAD 150 & 175 gutters

Quad 150 and 175 are our traditional gutters in two wider profiles. Quad 150 is compatible with NOVALINE fascia. BMT = 0.42mm.

They are available in COLORBOND® steel colours and unpainted ZINCALUME® steel.

Quad 150A = 75 mm (nominal) B = 74 mm (nominal) C = 150 mm (nominal)Custom cut lengths are available to 8000 mm.

Quad 175A = 103 mm (nominal) B = 96 mm (nominal) C = 175 mm (nominal)Custom cut lengths are available to 8000 mm.Available subject to enquiry.

Overstrap Internal corner:Used with all Quad gutters except 175 Pressed steelZL Used with all Quad gutters GA, ZL & CB

Stop end plate: LH or RHUsed with all Quad guttersZL & CB

Quad gutter accessories

Return stop end: LH or RH Full stop end: LH or RH Used with Hi-front Used with 150, 175 & Lo-front GA, ZL & CB GA, ZL & CB

External corner: Pressed steel Used with all Quad gutters

ZL & CB

A

C

B

1 zinger onlyin Quad 175

Remember

Accessories

Downpipes




unpainted

Spike bracketUsed with 150 & 175GALVANISED & POWDER COATED

Queensland only

Internal GP bracket Used with all Quad gutters ZL

ProductAvailability

Quad 175Subject to

enquiry


Rain

wat

er G

oods

LYSAGHT OGEE gutter

External corner: diecast Internal corner: diecast OGEE overstrap Internal GP bracket OGEE external bracket Stop end:90 & 45diecast 90 & 45diecast LH or RHPC on diecast & unpainted PC on diecast & unpainted ZL ZL CB CB

OGEE gutter accessories

LYSAGHT OGEE gutters offer a distinctive look for any home, and is compatible with NOVALINE fascia.

Available in COLORBOND® steel colours and unpainted ZINCALUME® steel.

Dimensions in SA and Vic.A = 64 mm (nominal)B = 98 mm (nominal)C = 145 mm (nominal)

LYSAGHT OGEE is available slotted in S.A.

A

C

B

LYSAGHT QUAD 115 gutters: Hi-front (& Lo-front NSW only)

Quad 115 is also a traditional gutter, and is compatible with NOVALINE fascia. Quad 115 Hi-front gutter better obscures the end of low-to medium-height roofing profiles from view. BMT = 0.42 mm. Standard COLORBOND® Steel colours are available.

In some states this profile is available slotted to prevent water overflowing into eaves during heavy rainfall.

In Victoria, Quad 115 Hi-front is also known simply as Quad gutter. N/A in W.A.

The Queensland Quad 115 Hi-front gutter is fluted.

(Quad 115 is available slotted in SA & NSW)

Hi-front DimensionsA = 62 mm (nominal) B = 90 mm (nominal) C = 115 mm (nominal)

Lo-front Dimensions (NSW)A = 65 mm (nominal) B = 70 mm (nominal) C = 115 mm (nominal)

Remember

Accessories

Downpipes



unpaintedPC = Powder coated steelZL = ZINCALUME® steel

unpainted

External corner: Pressed steel Used with all Quad gutters

ZL & CB Not available in NSW

Quad gutter accessories

Internal (GP) bracket External T-head bracketUsed with all Quad gutters ZINCALUME ZINCALUME & COLORBOND 150 only is available in Qld.

Internal corner: External corner: Diecast 90º & 45º Diecast 90º & 45º COLORBOND COLORBOND

Stop end plate: LH/RH pairUsed with all Quad guttersZINCALUME & COLORBOND

ProductAvailability

ProductAvailability

Overstrap Used with all Quad gutters ZINCALUME


Half round gutter is a simple profile, supported by external brackets. Ideal for tropical environments with huge water carrying capacity. Self-cleaning with every shower of rain. Available in ZINCALUME®, COLORBOND® & GALVABOND® steel. A similar product is available in Nth Qld, S.A. and NSW.

QueenslandAccessories include mitred corners, fixing brackets and stop ends.

Northern TerritoryA segmented Half Round gutter is available.

Easy fix accessories External powder-coated

bracket

Available subject to enquiry.

NSW bought-in (non-LYSAGHT) product size is:164mm (nominal)Available in 3000mm and 6000mm lengths only, subject to enquiry.Available in ZINCALUME® & COLORBOND® steel

LYSAGHT Half-round gutter

Remember

Accessories

Downpipes




unpainted

152 mm

164

96.573

The curved base on the LYSAGHT prevents build up of water and dirt, allowing the gutter to clean itself with every shower of rain.A similar product is available in S.A. and NSW subject to enquiry.

Queensland, NSW & VictoriaAccessories include mitred corners, fixing brackets and stop ends. Available in ZINCALUME®, COLORBOND® & GALVABOND® steel.

Easy fix accessories

Flat back gutter136 mm

The unique mounting bracket provides quick, easy solution to roof overhang. Simply drill a hole and fit the gutter using a bracket and approved fastener.

gutter accessories are designed to make installation quick and easy.

Accessories include fixing brackets and stop ends. Available in most standard COLORBOND® steel colours.

Easy fix accessories

used with gutter

LYSAGHT FITFAST gutter

20

125

140

69

150 mm

Victoria dimension is 150mm nominal.

Queensland dimensions

Queensland, Vic. dimensions

New South Wales dimensions

New South Wales dimensions

SGCI gutter clipZL

ProductAvailability

ProductAvailability

ProductAvailability

152

36.5 96.5


Rain

wat

er G

oods

LYSAGHT custom WA gutters

LYSAGHT RANCELINE gutterLYSAGHT COLONIAL gutterStandard COLORBOND® steel colours are available. Also available stotted.

65

90

98

These three gutters are made only in Western Australia. BMT=0.55 mm. They are available in unpainted ZINCALUME®, COLORBOND® colours, COLORBOND® STAINLESS, COLORBOND® METALLIC, copper, aluminium and hard zinc. Maximum length is 8000 mm.

Half round gutter clip

WA Gutter Accessories




unpainted

6190

90

LYSAGHT Colonial gutter(new wider base)

LYSAGHT Ranceline gutterLYSAGHT Ranceline slottedLYSAGHT Ranceline patio

ProductAvailability

ProductAvailability


Downpipes: Square & rectangular

TasmaniaCustom cut available.

Lengths2400

BMT0.60

FinishZL & CB

Dimensions75 x 5075 x 75100 x 50100 x 75100 x 100125 x 100150 x 75150 x 100

LYSAGHT downpipes are compatible with all gutter sections, including those used with the NOVALINE fascia system.

QueenslandWhole length is

tapered.

Lengths1800,2400

All other sizes: custom cut

BMT0.400.55

FinishGB, ZL & CB

Dimensions

0.40 BMT100 x 50100 x 75100 x 100

0.55 BMT100 x 50100 x 75100 x 100125 x 100150 x 100150 x 150

Other sizes made to order.

WAAvailable in copper,

COLORBOND®, ZINCALUME® &

aluminium.

Lengths1800 & 2400

BMT0.40 & 0.55

FinishZL & CB

Dimensions75 x 5095 x 45100 x 50100 x 75


SA & NT

Lengths1800

BMT0.400.55

FinishGB, ZL & CB(Some sizes available in

CB Ultra)

Dimensions50 x 5075 x 5075 x 75100 x 50100 x 75

100 x 100100 x 125100 x 150

NSW

Lengths 1800 & 2400

BMT0.40 & 0.55

FinishZL & CB

BMT & Dimensions

0.40 BMT100 x 50100 x 75

0.55 BMT100 x 100

Other sizes available on

request.Contact local

branch for availability.

Victoria

Lengths1800 & 2400

FinishCB: 0.55

ZL & GB:0.40 & 0.55

BMT & Dimensions

0.40 BMT75 x 5075 x 75100 x 50100 x 75

0.55 BMT100 x 100150 x 100144 x 144150 x 150

Downpipes

ZL ZL ZL & CB GB , ZL & CB ZL ZL

PopsAlso known as nozzles in New South Wales and drops in Queensland.

NSW100 x 50100 x 75100 x 100

Victoria75 x 5075 x 75100 x 50100 x 75100 x 100150 x 100144 x 144150 x 150

QueenslandUniversal100 x 50100 x 75100 x 100125 x 100150 x 100150 x 150


SA & NT50 x 5075 x 5075 x 75100 x 50100 x 75

100 x 100125 x 100150 x 100

Specify loose or fitted to gutter

WA75 x 5095 x 45

100 x 50100 x 75


Tasmania75 x 50100 x 50100 x 75100 x 100125 x 100150 x 100




unpainted

ProductAvailability

ProductAvailability


Rain

wat

er G

oods

Elbows (95°) & Shoes (45°)Also known as bends in New South Wales and Queensland

NSWRefer Service

Offer

Finish

Refer Service Offer

Vic.100 x 50100 x 75

100 x 100

Finish

ZL, GB & CB

Qld100 x 50100 x 75100 x 100


Finish

ZL & CB

SA & NT50 x 5075 x 5075 x 75100 x 50100 x 75100 x 100

Specify loose or fitted to gutter

75mm dia. to suit PVC also

available.

FinishGB, ZL & CB

WA75 x 5095 x 45100 x 50

Finish

ZL & CB

Tas.75 x 50100 x 50100 x 75100 x 100125 x 100150 x 100

Finish

ZL & CB

StrapsAlso known as astragals in New South Wales and South Australia, clips in Victoria and saddle straps in Western Australia.The sizes available are the same as those shown for pops.In Victoria and Western Australia, additional sizes are available on request.

Downpipe offsets (2 piece)NSW

100 x 50100 x 75

FinishZL & CB

Vic.100 x 50100 x 75

100 x 100

FinishZL, GB & CB

Qld100 x 50100 x 75

Nominate 450 or 600 mm

eaves

FinishZL & CB

SA & NT50 x 5050 x 7575 x 75100 x 50100 x 75100 x 100125 x 100150 x 100

FinishGB, ZL & CB

POA IN S.A..

WAAvailable

Tas.Not available

95

135

45

Elbow

Shoe

AdjustableRemember

Accessories

Downpipes




unpainted

Adjustable Length300-645mm (345 adjustment)

ProductAvailability


Downpipes: RoundDownpipes

Tas.Custom cut available.

Lengths1800

BMT0.60

FinishZL & GB

DimensionsDiameter

5075100125150

WA

Lengths

diameters: 1800 tapered

75 diameter: 1800, 2400crimped

BMT

diameters: 0.4075-& above: 0.40 & 0.55

Dimensions & finish

Diameter& finish50 GB60 GB

75 ZL & GB100 ZL & GB125 ZL & GB150 ZL & GBAsk for non-

standard.

Vic.

Lengths1800 & 2400

FinishZL & CB

Dimensions & BMT

0.40 BMTDiameter

50657590

0.55 BMT100125150175200225250275300

NSW

Lengths1800 & 2400

FinishZL & CB

DimensionsDiameter

7590100

Other diameters subject to enquiry.

Qld: TaperedWhole length

is tapered.

Lengths75 to 100 dia: 1800 & 2400

125 to 150 dia: 1800

BMT75 to 100 dia:

0.40100 to 150 dia:

0.55

FinishZL, GB & CB

DimensionsDiameter

7590100125150

Queensland: ParallelLengths

900

FinishCB

Dimensions (dia.) & BMT75 dia: 0.4090 dia: 0.40100 dia: 0.40100 dia: 0.55125 dia: 0.55150 dia: 0.55

Other diameters made to order in

0.55 BMT.

SA & NT

Lengths1800

BMT0.40 & 0.55

Dimensions & finish

Diameter & finish

50 GB, ZL & CB75 GB, ZL & CB90 GB, ZL & CB

100 GB, ZL & CB

125 GB, ZL & CB

150 GB, ZL & CB

(Some sizes available in

CB Ultra) Remember

Accessories

Downpipes




unpainted

ProductAvailability


Rain

wat

er G

oods

Pops/Nozzles/Drops

NSWDiameter (mm)

7590100

Universal nozzles also available in

NSW to suit 100 x 75mm

or 100 x 90mm.

Finish

ZL

VictoriaDiameter (mm)

50657590100125150200

FinishZL & GB

QueenslandDiameter (mm)

Universal7590100125150

FinishZL & CB

SA & NTDiameter (mm)

50-75-90100-125-150

Specify loose or fitted to gutter.

Limited colours.

FinishGB, ZL, CB

WADiameter (mm)

50-65-70100

Overflows: 25 mm dia.x 100 longGB only

Ask for non-standard.

FinishZL

TasmaniaDiameter (mm)

50-75100-150

FinishZL

Elbows (95°) & Shoes (45°)Also known as bends in New South Wales and Queensland

NSWRefer to NSW Service Offer.

VictoriaDiameter

50657590

100

Finish

ZL, GB & CB

QueenslandDiameter

7590100125150


Finish

ZL, GB & CB

SA & NTDiameter

5065 (not SA)

7590 (pressed

bend diecast)100125

150 (not NT)

Limited colours.

FinishCB, ZL & GB

WADiameter

75


Finish

ZL & GB

TasmaniaDiameter

5075100125150

Finish

ZL & GB

StrapsAlso known as astragals in New South Wales and South Australia, clips in Victoria and saddle straps in WA.The sizes available are the same as those shown for pops.In Victoria there is also a 170mm diameter clip.In Western Australia 75mm strapping is used (1800mm lengths).

More downpipe accessories on next page

95

135

45

Elbow

Shoe

ProductAvailability


Crimped bend 90 & 45 degreesNSW

Diameter7590100

Subject to enquiry.

FinishZL & CB

Standoff bracketsSA

Diameter75-90-100125-150

unpainted

WA & NSWDiameter75 -100

Galvanised onlyNon-standard

subject to enquiry.

Chinamans hatNSW

Diameter(On short pipe)

150175200225250300350400

FinishGB

QueenslandDiameter

(On short pipe)7590100125150175200225250300

FinishZL, GB & CB

WADiameterKnown as

cap with strap100150200

Finish

GB

Downpipe offsets (2 piece).VictoriaDiameter

657590

100

FinishZL, GB & CB

NSWRefer NSW

Service Offer for details.

FinishRefer NSW

Service Offer for details.

WADiameter

75

FinishZL, GB & CB

SADiameter

(On short pipe)Made to order

75-100-125150-300

Other sizes available on

request.

Finish GB & CB

Adjustable

Remember

Accessories

Downpipes




unpainted

QueenslandDiameter

5075


FinishZL & CB

450mm 450mm

150mm diameterNominate roof pitch

Available in COLORBOND®

& ZINCALUME® Steel

WA Flumes with base

Adjustable Length450-600mm (150mm adjustment)

SADiameter50-75-90

100-125-150POA in S.A.

FinishZL, GB & CB

ProductAvailability

ProductAvailability


Accessories

Please refer to your local sales area offer for availability and full product details.

Acc

esso

ries

Qld NSW Vic. Tas. S.A. W.A. N.T. Product Description (Refer to local sales office for details)

Insulation: Reflective foil laminate

Insulation: Building blanket with foil

Insulation: Building blanket

Insulation: Ceiling batts

Insulation: Wall batts

Insulation: Foil tape

Accessory sheet

Box gutter brackets

Box gutter sumps

Box gutter expansion joints

Flat strips (hoop iron)

Louvres

Fixed metal louvres

Adjustable

Angle to suit roof pitch

Ant caps

Dektite® pipe flashings

Lapseal

Safety mesh

Roof infill strips (closed cell type)CUSTOM ORB profile shown


Accessories

Please refer to your local sales area offer for availability and full product details.

Qld NSW Vic. Tas. S.A. W.A. N.T. Product Description (Refer to local sales office for details)

Weatherlok washers

Ventilators: Industrial and Domestic

Transluscent sheeting

Strapping (coils)

Silicone sealant)

Soft zinc flashing

Ventilated ridges

Turn-up/Turn down tools & notching tools :CUSTOM ORB, INTEGRITY 820, KLIP-LOK 406, KLIP-LOK 700HS, SPANDEK, LONGLINE 305, TRIMDEK. Enquire for local availability.

Ridge capping

Apron flashing Bird wire

Throat size

SPANDEK

TRIMDEKTurn-up &turn-down

INTEGRITY 820 or SPANRIB

Turn-up &turn-down

TurnupTurn

downTurn upLONGLINE 305

Turn-up & turn-down KLIP-LOK 406

ProductAvailability


Acc

esso

ries

Rainwater headsNSW

Refer to the Service Offer

for details.

Vic

MaterialsZL & CB

SizesCustom made to

order

Qld

MaterialsGB, ZL & CB

SizesCustom made to

order

Round rainwater heads custom made to order

Contact SA branch for

details on the full rainwater head range.

SA & NT

MaterialsZL , GB & CB

WA

MaterialsZL , GB & CB

Sizes

Flat bottom300 x 750 x 150375 x 225 x 225

600 x 300 x 300

Tapered bottom250 x 200300 x 200400 x 250

450 x 300600 x 450

Generally, trade work can be

manufactured to client's detailed

drawings.W

D

L

WD

L

D

Transitions, roof collars & overflows

WD

L

D

W

D

L

W

D

L

W

D

L

W

L

D

Antique Rainhead

Tapered ClassicRainhead

Classic Rainhead

Tapered Bushranger Rainhead

Bushranger Rainhead

Tulip Rainhead

Half Moon Rainhead

Quarter Moon Rainhead

Full Moon Rainhead

Ornamental Rainhead

ProductAvailability

ProductAvailability

CB Ultra & metallic, Copper and Stainless are subject to enquiry.

AbbreviationsCB = COLORBOND® colours on

ZINCALUME® steelCU = Copper unpaintedGB = GALVABOND® steel

unpaintedSS = Stainless steel unpaintedZL = ZINCALUME® steel

unpainted All measurements are

millimetres


LYSAGHT PROFILE

CREST PAN

Single & Total Lapped Single Lapped

Single & Total Lapped

Single0.55 up to 1.0mm BMT 1.0mm up to 3.0mm BMT 1.0mm up to 1.9mm BMT

≥0.55 up to 1.0mm BMT

Single & Total Lapped0.55 up to 1.0mm BMT 1.0mm up to 3.0mm BMT

#10-16X16 HH#10-16X16 HHM5-16X25 DHM5-16X25 DH

CUSTOM ORBM5.5-14X39 AUTOTEKS M5.5-14X39 AUTOTEKS

M6-11X50 ROOFZIPSM6-11x25 ROOFZIPS

#10-16X16 HH#10-16X16 HH

M5-16X25 DHM5-16X25 DH

CUSTOM BLUE ORB M5.5-14X39 AUTOTEKS M5.5-14X39 AUTOTEKSM6-11X50 ROOFZIPS

M6-11x25 ROOFZIPS

#10-16X16 HH #10-16X16 HHM5-16X25 DH

M5-16X25 DHTRIMDEK

M5.5-14X50 AUTOTEKS M5.5-14X50 AUTOTEKS M6-11X50 ROOFZIPS

M6-11x25 ROOFZIPS

#10-16X16 HH #10-16X16 HHM5-16X25 DH

M5-16X25 DHSPANDEK

M5.5-14X50 AUTOTEKS M5.5-14X50 AUTOTEKS M6-11X50 ROOFZIPS

M6-11x25 ROOFZIPS

N/A N/AINTEGRITY 820 M6-11X65 ROOFZIPS

N/A N/A N/A#12-14x20 HH

FLATDEK

M6-11x25 ROOFZIPS

N/A N/A N/A#10-16X16 WH#10-16X22 WH

#10-16X16 WH#10-16X22 WH

KL406 CLIP FIXED

N/A N/A N/A #12-14x20 HH#12-14x30 HH

KL700HSCLIP FIXED

M6-11x25 ROOFZIPS#15-15x25 HH

N/A N/A N/A#12-14x20 HH#12-14x30 HH

KL700 CLASSICCLIP FIXED

M6-11x25 ROOFZIPS#15-15x25 HH

N/A N/A N/A #10-16X16 WH#10-16X22 WH

#10-16X16 WH#10-16X22 WH

#10-16x16 HH#10-16x16 HH

M5-16X25 DHM5-16X25 DHM5.5-14X39 AUTOTEKS

M6-11X50 ROOFZIPS

M6-11x25 ROOFZIPS

#10-16x16 HH#10-16x16 HHM5-16X25 DHM5-16X25 DHM5.5-14x50 AUTOTEKS


#10-16x16 HH#10-16x16 HH

M5-16X25 DHM5-16X25 DHM5.5-14x50 AUTOTEKS


N/A N/A#10-16X20 RIPPLETEKS #10-16X20 RIPPLETEKS

N/A N/A

#10-16x16 HH #10-16x16 HHM5-16X25 DH

M5-16X25 DHM6-11x25 ROOFZIPS

N/A N/A#10-16x16 HH #10-16x16 HHM5-16X25 DH M5-16X25 DH

M6-11x25 ROOFZIPS

N/A

N/A

N/A

N/A

N/A N/A

#10-16x16 HH #10-16x16 HHM5-16X25 DH M5-16X25 DH

M6-11x25 ROOFZIPS

Lapped1.0mm up to 1.9mm BMT

#10-16X16 HH

#10-16X16 HH

#10-16X16 HH

#10-16X16 HH

N/A

#12-14x20 HH

#10-16X16 WH#10-16X22 WH

#12-14x20 HH#12-14x30 HH

#12-14x20 HH#12-14x30 HH

#10-16X16 WH#10-16X22 WH

#10-16x16 HH

#10-16x16 HH

#10-16x16 HH

#10-16X20 RIPPLETEKS

#10-16x16 HH

#10-16x16 HH

#10-16x16 HH

Roofing - non-cyclonic

Walling - non-cyclonic

HG - HIGH GRIP TG - TOP GRIPWH - WAFER HEADHH - HEX HEAD DH - DESIGNER HEADNOTES:

LYSAGHT PROFILE

CREST PAN

Single & Total Lapped Single Lapped Single≥0.55 up to 1.0mm BMT ≥1.0mm up to 3.0mm BMT ≥1.0mm up to 1.9mm BMT ≥1.0mm up to 3.0mm BMT

Lapped≥1.0mm up to 1.9mm BMT

#12-14X35 HH HG/TG #12-14X35 HH HG/TG

#12-14X35 HH HG/TG #12-14X35 HH HG/TG

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

#12-14X68 HH HG/TG #12-14X68 HH HG/TG

#12-14X35 HH HG/TG #12-14X35 HH HG/TG

M5.5-14X39 AUTOTEKS

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

M5.5-14X50 AUTOTEKS

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

#12-14X45 HH HG/TG#12-14X55 HH HG/TG

M5.5-14X50 AUTOTEKS

#10-16X16 HH #10-16X16 HH#10-16X16 HH#12-14x20 HH

M5-16X25 DHM5-16X25 DH

M4.8-16X25 RIPPLEZIPS M4.8-16X25 RIPPLEZIPS M4.8-16X25 RIPPLEZIPS

LONGLINE 305

CUSTOM ORB/ WALLCLAD

TRIMDEK/ TRIMWALL

SPANDEK

MINI ORB

PANELRIB

MULTICLAD

EASYCLAD 2PF

Fasteners: Screw to steel–AS3566 Class 4 Roof & Wall cladding - non-cyclonic

ProductAvailability

Selection on these pages is an indicative but not comprehensive selection of fasteners we recommend for our products. All required EPDM seal. Refer to local office for availability.


ProductAvailability

Fasteners: Screw to steel–AS3566 Class 4 Roof & Wall cladding - cyclonic


LYSAGHT PROFILE

CREST PAN

Single & Total Lapped Single Lapped Single & Total Lapped Single0.55 up to 1.0mm BMT 1.0mm up to 3.0mm BMT 1.0mm up to 1.9mm BMT 0.55 up to 1.0mm BMT 1.0mm up to 3.0mm BMT

CUSTOM ORB

CUSTOM BLUE ORB

TRIMDEK

SPANDEK

INTEGRITY 820

N/A N/A N/AFLATDEK

N/A N/A N/AKL406 CLIP FIXED

N/A N/A N/AKL700HSCLIP FIXED


LONGLINE 305


TRIMDEK/ TRIMWALL

SPANDEK

MINI ORB

PANELRIB

MULTICLAD

EASYCLAD 2PF


LYSAGHT PROFILE

CREST PAN

Single & Total Lapped Single Lapped Single & Total Lapped Single0.55 up to 1.0mm BMT 1.0mm up to 3.0mm BMT 1.0mm up to 1.9mm BMT 0.55 up to 1.0mm BMT 1.0mm up to 3.0mm BMT


Roofing - cyclonic

Walling - cyclonic

HG - HIGH GRIPWH - WAFER HEADHH - HEX HEAD DH - DESIGNER HEADNOTES:

#14-10X42 HH #14-10X42 HH #14-10X25 HH #14-10X25 HH#15-15x47 HH

#15-15x25 HH


#15-15x25 HH


#15-15x25 HH


#15-15x25 HH

M5.5-14X25 AUTOTEKS M5.5-14X25 AUTOTEKS M5.5-14X25 AUTOTEKS

#14-10x65 HH #14-10x65 HH#15-15x55 HH

#12-14X20 HH #12-14X20 HH #12-14X20 HH

#14-10X42 HH #14-10X42 HH #14-10X25 HH #14-10X25 HH

#15-15x47 HH

#15-15x25 HH


#15-15x25 HH


#15-15x25 HH

These products are not suitable for cyclonic conditions.

These products are not suitable for cyclonic conditions.

This product is not suitable for cyclonic conditions.

M6.5-12x55 CyclonicZIPS








Acc

esso

ries


Fasteners: Screw to timber–AS3566 Class 4 Roof & Wall Cladding - non-cyclonic

ProductAvailability

LYSAGHT PROFILE

CUSTOM ORB

CUSTOM BLUE ORB

TRIMDEK

SPANDEK

INTEGRITY 820

FLATDEK

KL406 CLIP FIXED

KL700HSCLIP FIXED


LONGLINE 305


TRIMDEK/ TRIMWALL

SPANDEK

MINI ORB

PANELRIB

MULTICLAD

EASYCLAD 2PF

Roofing - non-cyclonic

Walling - non-cyclonic

HG - HIGH GRIPWH - WAFER HEADHH - HEX HEAD DH - DESIGNER HEAD TG - TOP GRIPNOTES:

Pan Crest Pan Crest

N/A N/A N/A N/A

N/A N/A

N/A #10-12X35 T17 WH N/A

N/A N/A

N/A N/A

#10-12X25 T17 WH N/A #10-12X35 T17 WH N/A

N/A N/A

N/A N/A

N/A N/A

N/A N/A

Hardwood Softwood

LYSAGHT PROFILE Pan Crest Pan Crest

Hardwood Softwood

T17 - TYPE 17 TIMBER SCREW

#10-12X25 T17 HH #10-12X30 T17 HH

#12-11X25 T17 HH #12-11X50 T17 HG/TG HH #12-11X25 T17 HH #12-11X50 T17 HG/TG HH

M5-16X25 DH

#10-12X25 T17 HH#12-11X25 T17 HH

M5-16X25 DH

#10-12X25 T17 HH#12-11X25 T17 HH

M5-16X25 DH

#10-12X25 T17 HH#12-11X25 T17 HH

M5-16X25 DH

#10-12X25 T17 HH#12-11X25 T17 HH

M5-16X25 DH

M5-16X25 DHM6-11X25 ROOFZIPS#10-12X30 T17 HH#12-11X25 T17 HH

M5-16X25 DHM6-11X25 ROOFZIPS

#10-12X30 T17 HH#12-11X25 T17 HH


#10-12X30 T17 HH#12-11X25 T17 HH


M6-11X50 ROOFZIPS

#12-11X50 T17 HG/TG HH#12-11X50 T17 HG/TG HH

M6-11X50 ROOFZIPS

#12-11X65 T17 HG/TG HH#12-11X65 T17 HG/TG HH

M6-11X65 ROOFZIPS

#12-11X50 T17 HG/TG HH

#12-11X65 T17 HG/TG HH

M6-11X65 ROOFZIPS

#10-12X30 T17 HH#12-11X25 T17 HH


#10-12X25 T17 WH

#12-11X25 T17 HH #12-11X25 T17 HH

M5.5-11x40 BATTENZIPSM5.5-11x40 BATTENZIPS

M6-11X25 ROOFZIPS

#12-11X25 T17 HH #12-11X25 T17 HH

M5-16X25 DH M5-16X25 DH

M5.5-11x40 BATTENZIPS M5.5-11x40 BATTENZIPSM6-11X25 ROOFZIPS

#10-12X25 T17 HH #10-12X30 T17 HH


M5-16X25 DH M5-16X25 DHM6-11X25 ROOFZIPS

M6-11X50 ROOFZIPS

#10-12X25 T17 HH #10-12X30 T17 HH


M5-16X25 DHM5-16X25 DH

M6-11X25 ROOFZIPSM6-11X65 ROOFZIPS

#10-12X25 T17 HH#10-12X30 T17 HH

#12-11X25 T17 HH #12-11X50 T17 HG/TG HH#12-11X25 T17 HH #12-11X65 T17 HG/TG HH

M5-16X25 DH M5-16X25 DHM6-11X25 ROOFZIPS M6-11X65 ROOFZIPS

#10-16X20 RIPPLETEKS #10-16X20 RIPPLETEKSM4.8-16X25 RIPPLEZIPS M4.8-16X25 RIPPLEZIPS

#10-12X25 T17 HH #10-12X30 T17 HH

#12-11X25 T17 HH #12-11X25 T17 HH

M5-16X25 DHM5-16X25 DH

M6-11X25 ROOFZIPS

#10-12X25 T17 HH #10-12X30 T17 HH

#12-11X25 T17 HH #12-11X25 T17 HH

M5-16X25 DHM5-16X25 DH

M6-11X25 ROOFZIPS

#10-12X25 T17 HH #10-12X30 T17 HH#12-11X25 T17 HH #12-11X25 T17 HH

M5-16X25 DH M5-16X25 DHM6-11X25 ROOFZIPS



Fasteners: Screw to timber–AS3566 Class 4 Roof & Wall Cladding - Cyclonic


LYSAGHT PROFILE

LYSAGHT PROFILE

CUSTOM ORB

CUSTOM BLUE ORB

TRIMDEK

SPANDEK

INTEGRITY 820

FLATDEK

KL406 CLIP FIXED

KL700HSCLIP FIXED


LONGLINE 305


TRIMDEK/ TRIMWALL

SPANDEK

MINI ORB

PANELRIB

MULTICLAD

EASYCLAD 2PF

Roofing - Cyclonic

Walling - Cyclonic

HG - HIGH GRIPTG - TOP GRIPWH - WAFER HEADHH - HEX HEAD DH - DESIGNER HEADNOTES:

Pan Crest Pan Crest

N/A

N/A

N/A#12-11X25 T17 HH

N/A

N/AN/A

N/A N/A

Hardwood Softwood

Pan Crest Pan Crest

Hardwood Softwood

T17 - TYPE 17 TIMBER SCREW

#14-10x39 T17 HH

#14-10x39 T17 HH

#14-10x39 T17 HH

#14-10x39 T17 HH

#14-10x39 T17 HH

#12-11X45 T17 HH #12-11X45 T17 HH

M5.5-11x40 BATTENZIPS M5.5-11x40 BATTENZIPS

#12-11X45 T17 HH #12-11X45 T17 HH

M5.5-11x40 BATTENZIPS M5.5-11x40 BATTENZIPS

#14-10x39 T17 HH

#14-10x39 T17 HH

#14-10x39 T17 HH

These products are not suitable for cyclonic regions.

This product is not suitable for cyclonic regions.

This product is not suitable for cyclonic regions.

#12-11x25 T17 HH #12-11X50 T17 HG/TG HHM6-11X50 ROOFZIPS#14-10X50 T17 HH#14-10X65 T17 HH




#12-11X75 T17 HH#14-10X75 T17 HH#14-10X90 T17 HH

#12-11X50 T17 HG/TG HH#12-11X25 T17 HHM6-11X50 ROOFZIPS#14-10X50 T17 HH#14-10X65 T17 HH

#12-11X25 T17 HH #12-11X65 T17 HG/TG HHM6-11X65 ROOFZIPS#14-10X65 T17 HH#14-10X75 T17 HH

#12-11X25 T17 HH #12-11X65 T17 HG/TG HHM6-11X65 ROOFZIPS#14-10X65 T17 HH#14-10X75 T17 HH

ProductAvailability


ProductAvailability

Fasteners: Screw to steel batten–AS3566 Class 4 Steel batten - non-cyclonic

Steel support thickness (mm)BattensBMT (mm) 1.0 1.2 1.5 1.9 2.4 3.0 3.5 4.0 5.0

#10-16X16 HH #10-16X16 HH#10-16X16 HH #12-14x20 HH #12-14x20 HH #12-14x20 HH #12-14x20 HH #12-24X32 HH

M5-16X25 DH M5-16X25 DH

M5-16X25 DH0.42

M5.5-11x40BATTENZIPS



M6-11X25 ROOFZIPS

#10-16X16 HH #10-16X16 HH #10-16X16 HH

#10-16X16 HH #10-16X16 HH #12-14x20 HH #12-14x20 HH #12-24X32 HH #12-24X32 HHM5-16X25 DH M5-16X25 DH M5-16X25 DH

M5-16X25 DH M5-16X25 DH

0.55M5.5-11x40

BATTENZIPSM5.5-11x40


BATTENZIPS

#10-16X16 HH #10-16X16 HH #10-16X16 HH

#12-14x20 HH #12-14x20 HH #12-14x20 HH #12-14x20 HH #12-24X32 HH #12-24X32 HHM5-16X25 DH M5-16X25 DH M5-16X25 DH0.7M5.5-11x40



BATTENZIPS

#10-16X16 HH #10-16X16 HH #10-16X16 HH

#12-14x20 HH #12-14x20 HH #12-14x20 HH

#12-14x20 HH #12-14x20 HH

#12-14x20 HH #12-24X32 HH #12-24X32 HHM5-16X25 DH M5-16X25 DH M5-16X25 DH0.75




#12-14x20 HH #12-14x20 HH #12-14x20 HH

#12-14x20 HH #12-24X32 HH #12-24X32 HH #12-24X32 HH0.9




#12-14x20 HH #12-14x20 HH #12-14x20 HH

#12-14x20 HH #12-14x20 HH #12-14x20 HH #12-24X32 HH #12-24X32 HH #12-24X32 HH1.0M5.5-11x40



BATTENZIPS

#12-14x20 HH #12-14x20 HH #12-14x20 HH

#12-14x20 HH #12-14x20 HH #12-24X32 HH #12-24X32 HH #12-24X32 HH #12-24X32 HH1.2M5.5-11x40



BATTENZIPS

HH - HEX HEADDH - DESIGNER HEAD

NOTES:

Steel batten to steel support connection fastener selection for single and lapped battens

Selection on these pages is an indicative but not comprehensive selection. Refer to local office for availability.


Acc

esso

ries

ProductAvailability

Steel support thickness (mm)BattensBMT(mm) 1.0 1.2 1.5 1.9 2.4 3.0 3.5 4.0 5.0

0.42

#12-24X32 HH #12-24X32 HH

#12-24X32 HH

0.55

#12-24X32 HH #12-24X32 HH0.70

#12-24X32 HH #12-24X32 HH0.75

#12-24X32 HH #12-24X32 HH #12-24X32 HH0.90

#12-24X32 HH #12-24X32 HH #12-24X32 HH #12-24X32 HH1.0

#12-24X32 HH #12-24X32 HH #12-24X32 HH #12-24X32 HH1.2

HH - HEX HEADNOTES:

Steel batten to steel support connection fastener selection for single and lapped battens - cyclonic

#14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH#15-15X25 HH

#14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH#15-15X25 HH

#14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH#15-15X25 HH

#14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH

#14-10x25 HH

#14-10x25 HH

#14-10x25 HH

#14-10x25 HH

#14-10x25 HH #14-10x25 HH

#14-10x25 HH#15-15X25 HH

#14-10x25 HH #14-10x25 HH #14-10x25 HH

#14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH

#14-10x25 HH #14-10x25 HH #14-10x25 HH #14-10x25 HH

Fasteners: Screw to steel batten–AS3566 Class 4 Steel batten - cyclonic

Selection on these pages is an indicative but not comprehensive selection of fasteners we recommend for our products. Refer to local office for availability.


ProductAvailability

BattenBMT (mm)

0.55

0.70

0.75

0.90

1.0

1.2

Non-cyclonic CyclonicHardwood Softwood Hardwood Softwood

Single and lapped*

M5.5-11x40 BATTENZIPS

M5.5-11x40 BATTENZIPSM5.5-11x40 BATTENZIPS M5.5-11x40 BATTENZIPSM6-11X25 ROOFZIPS

Steel batten to timber truss/rafter connection fastener selection

#14-10X25 T17 HH#14-10X39 T17 HH

#14-10X39 T17 HH



#14-10X25 T17 HH#14-10X39 T17 HH

#14-10X39 T17 HH



#14-10X25 T17 HH#14-10X39 T17 HH

#14-10X39 T17 HH







* This table is suitable for single and lapped battens.

Fasteners: Screw to timber batten–AS3566 Class 4 Steel batten - cyclonic & non-cyclonic

Selection on these pages is an indicative but not comprehensive selection. Refer to local office for availability.


Acc

esso

ries

Fencing Fasteners: Screw to steel–AS3566 Class 4 (except as noted)

Structural Decking Fasteners: Screw to steel–AS3566 Class 4 (except as noted)

Refer to regional product offers for details of all available fasteners. Selection on these pages is an indicative but not comprehensive selection.Class 3 fasteners not available in Queensland. All other states, refer to local office for availability.

Refer to regional product offers for details of all available fasteners. Selection on these pages is an indicative but not comprehensive selection.Class 3 fasteners not available in Queensland. All other states, refer to local office for availability.

ProductAvailability

ProductAvailability

FASTENER TABLE - FENCING: TYPE 1, TYPE 2 AND TYPE 3 FENCES

TYPE 1, 2, 3 TYPE 1, 2, 3 TYPE 1, 2, 3 TYPE 1, 2, 3 TYPE 1, 2, 3 TYPE 3 ONLY TYPE 3 ONLY

FENCE TYPE RAIL TO POST POST TO POST LATTICE TO RAIL FENCE CAP TO POST STIFFENER TO POST PANEL TO RAIL POST TO SHS

NEETASCREEN #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

SMARTASCREEN #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

CUSTOMSCREEN #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

MINISCREEN #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

NEETASCREEN PLUS #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

SMARTASCREEN PLUS #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

CUSTOMSCREEN PLUS #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

MINISCREEN PLUS #10-16X16 HH #10-16X16 HH #10-16X16 HH #10-16X16 HH #12-24X32 HH #12-14X45 HH #10-16X16 HH

NEETALOK CONNECTION TYPE

FENCE TYPE RAIL TO POST FENCE CAP TO POST PANEL TO RAIL RAIL TO BRACKET BRACKET TO POST

FASTENER #12-14X20 HH #12-14X20 HH #12-14X45 HH #12-14X20 HH #12-14X20 HH

Steel support thicknessDecking Type Up to 12mm Over 12mm (pre-drill) Edge form Side LapBONDEK #12-24x32 HH #12-24x32 HH #10-16x16 HH #10x24x16 HHPOWERDEK #12-24x32 HH #12-24x32 HH #10-16x16 HH #10x24x16 HH


Miscellaneous Fasteners: Screw to steel–AS3566 Class 4 (except as noted)Refer to regional product offers for details of all available fasteners. Selection on these pages is an indicative but not comprehensive selection.Class 3 fasteners not available in Queensland. All other states, refer to local office for availability.

ProductAvailability

ProductAvailability

Coating Class 4 Gauge TPI Length (mm)

Self drilling screw for thin gauge steel (with under-washer thread) with seal15 15 55

Hex. head self drilling screw with seal (part thread)

14 10 4214 10 5014 10 65

Stitching screws Hex. head with seal

10 12 20

Hex. head with 19 mm alu-minium bonded washer

14 10 4214 10 5014 10 65

Hex. head self drilling screw with seal10 24 1610 24 2412 24 3012 14 30

Hex. head self drilling screw

12 24 5012 24 6514 20 6514 20 4514 20 30M5 16 25

RoofZips® Hex. head self drilling screw for steel (with underwasher thread) with seal

M6 11 50mmM6 11 65mm

Hex. head self drilling screw for steel (with underwasher thread) with seal 12 14 35 12 14 45 12 14 68

Coating Class 4 Gauge TPI Length (mm)BattenZips® Hex. head self drilling screw for steel (with underwasher thread)

M5.5 11 40

AutoTeks® Hex. head self drilling screw for steel (with underwasher thread) with seal

M5.5 14 50AutoTeks® Hex. head self drilling screw for steel (with underwasher thread) with seal

M5.5 14 39M6.5 14 50Hex. head self drilling screw for steel (with underwasher thread) with seal (full thread)

10 16 16 12 14 20 14 10 42 (part thread)Hex. head, no seal

10 16 16 10 16 25 12 14 55 12 14 65 12 14 75 14 20 22 14 10 25 14 10 42 14 10 50

Hex. head with 19mm aluminium bonded washer

14 10 42 14 10 50 14 10 65 Self drilling screw with 25mm aluminium bonded washer 15 15 47

Wingtek 8 18 356 20 5010 16 4010 16 5510 16 75

Coating Class 4 Gauge TPI Length (mm) Button Head

8 18 128 18 208 18 258 18 32

Zinc platedGauge TPI Length Wafer head 10 16 16 10 16 22

Hex. head, no seal 8 18 12 10 16 16

Coating Class 3 coatedGauge TPI Length Wafer head 10 16 16 10 16 22

Ripple Teks® 10 16 20 10 16 30

RippleZips®

M4.8 16 25

Autoteks®, BattenZips®, Rip-ple Teks® , RippleZips® and RoofZips® are registered trade-marks of ITW Buildex.

Cyclonic Assemblies

Coating class 4 coatedGauge TPI LengthFor CUSTOM ORB8 18 32

For SPANDEK & TRIMDEK 14 10 50

For KLIP-LOK 406 HIGH WIND 14 10 65

Metal Batten Teks® for CUSTOM ORB15 15 47

Metal Batten Teks® for SPANDEK & TRIMDEK15 15 55

Metal Batten Teks® for KLIP-LOK 406 HIGH WIND15 15 55


Miscellaneous Fasteners: Screw to timber–AS3566 Class 4 (except as noted)Refer to regional product offers for details of all available fasteners. Selection on these pages is an indicative but not comprehensive selection.Class 3 fasteners not available in Queensland. All other states, refer to local office for availability.

ProductAvailability

ProductAvailability

Coating class 3 coatedGauge TPI Length Hex. head with thread under washer with seal

12 11 50 12 11 65

Hex. head with seal (full thread) 10 12 25 12 11 25 14 10 25

Hex. head with seal (part thread) 12 11 45 14 10 50 14 10 65

Hex. head no seal (full thread) 10 12 25 12 10 25 14 10 25Hex. head, no seal (part thread) 12 11 45 12 11 50 14 10 50 14 10 65

Ripple Teks® screws (30 mm) are used for fixing MINI ORB to timber — see previous page for sizes.

Coating class 4 coatedGauge TPI Length

Roofzips® Hex. head Self drilling screw for steel or timber (with underwasher thread) with seal 12 11 50Hex. head with thread under washer with seal 12 11 65Hex. head with seal

12 11 25 14 10 25 14 10 50 14 10 65 14 10 75 14 10 90

Hex. head, no seal (N/A in Queensland)

12 11 25 14 10 25 14 10 50 14 10 65 Hex. head with 16 mm aluminium bonded washer

14 10 50 14 10 65 Hex. head with 19 mm aluminium bonded washer

14 10 50 14 10 65

Hex. head with 25 mm aluminium bonded washer

14 10 50 14 10 65

Zinc platedGauge TPI Length

Wafer head

10 12 25 10 12 45

Countersunk head (N/A in Queensland)

6 18 25

Bugle head batten

14 10 75 14 10 100

Cyclonic fastenersCoating class 4 coatedGauge TPI Length Hex. head for CUSTOM ORB

HARDWOOD 14 10 50

14 10 65

Hex. head for SPANDEK & TRIMDEK

HARDWOOD 14 10 65

14 10 75 Hex. head for KLIP-LOK 406 HIGH WIND

HARDWOOD 14 10 75

14 10 90

Cyclonic fastenersCoating class 3 coatedGauge TPI Length KLIP-LOK-700HS clip fixed to timber Type 17 Hex. Head

HARDWOOD 12 11 25

12 11 40

Fasteners: Blind rivets Refer to your local region's Service Offer for details of available fasteners. Body Mandrel Dia. Grip Type Head

Aluminium Steel 3.2 8 Plain Button

Across flats Length

Hexagon sockets 5/16 inch 45 5/16 inch 65 3/8 inch 65

Across flats Length

Phillips drive bits #2 50

Length

Magnetic bit holder 75

Fastener drive tools

Acc

esso

ries


LYSAGHT Zeds & Cees (Purlins & Girts)

t

D

t

Above 100 size, the standard product offer is a LYSAGHT SUPAPURLIN in NSW, SA and South East Qld.Z/C30024-Z/C40030 are available subject to enquiry in WA & NT. Z/C15010, Z/C15012, Z/C15015, Z/C20012, Z/C 25015 and Z/C30019 subject to enquiry in SA.Z/C400 sizes are only available in Queensland and are subject to enquiry and extended lead times.

LYSAGHT Zed and Cee sections are accurately roll-formed from high-strength zinc-coated steel to provide an efficient, lightweight, economical roofing and cladding support system for framed structures.

The system includes HOOK-LOK® ll bridging, Series 300 and 350 bridging and a wide range of accessories. It is supplied ready for erection.

Material specificationsLYSAGHT Zed and Cee sections are roll-formed from GALVASPAN® steel complying with AS1397—2001. In the grades shown, the number prefixed with G indicates minimum yield stress in MPa; and the number prefixed with Z indicates minimum coating mass in g/m2.

* Z450 may be available by special request.

* Queensland use AZ150 material for C/Z10010 sections. Refer to local supplier.

PunchingZed and Cee sections are normally supplied with holes punched to the Australian Steel Institute (ASI) gauge lines, except in Victoria where the 150 series sections are punched to the gauge

Dimensions of Zeds & Cees

ProductAvailability

75

38

1212

1.0

Available in South Australia only. Available in 0.8, 1.0, 1.2 and 1.6mm BMT only.Supplied unpunched.

LYSAGHT SA Cee section

ProductAvailability


Stru

ctur

al P

rodu

cts

LYSAGHT SUPAPURLINS

SUPAPURLINS PRODUCT RANGE

LYSAGHT SUPAPURLINS® are the new purlin profiles that give you higher capacities and more economical solutions.

BlueScope Lysaght has patented SUPAZEDS® and SUPACEES® because it is the first significant development in the field for a very long time.

SUPAZEDS and SUPACEES are only available in New South Wales, South Australia and S.E. Queensland as a standard product offer. Other areas are subject to enquiry.

Available in NT from SA manufacturing site with a two week lead time.

tcudorP htpeD)mm(

ssenkcihT)mm(

tloBstnemeriuqeR

epahSnilruPemaNdna

gnigdirBmetsyS

21MedarG

8.8ro6.4

gnigdirBhtiwmetsyS

/pmalcsdnerotacol

detlobrotekcarb

sdne

01051CS/ZS21051CS/ZS51051CS/ZS91051CS/ZS42051CS/ZS

251

0.12.15.19.14.2

21002CS/ZS51002CS/ZS91002CS/ZS42002CS/ZS

302

2.15.19.14.2

51052CS/ZS91052CS/ZS42052CS/ZS

4

4

525.19.14.2

91003CS/ZS42003CS/ZS03003CS/ZS

00

00

39.14.20.3

edarG61M8.8ro6.4

4*2053CS/ZS0*

0

3053CS/ZS

4**4 20CS/ZS04 0**30CS/ZS

0534.20.3

4.20.3

3. Queensland and South Australia are able to manufacture downturned lipped purlins, subject to enquiry. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.

1. Purlins marked * availability is subject to enquiry. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.2. Purlins marked ** are available in Qld and SA only. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.

LYSAGHTSeries

300-350 bridging

Details onapplication

SUPAZEDS

SUPACEES

LYSAGHTHOOK-LOK II

Purlin Product CodingThe coding of the purlin products consists of prefix letters followed by a series of numbers.The prefix letters are for the various purlin shapes and consist of: SZ = LYSAGHT SUPAZED® shapeSC = LYSAGHT SUPACEE® shape

The letter prefix is then followed by a three digit number indicating the section nominal depth in millimetres (not the actual depth). Thus the nominal depths would be 150, 200, 250, 300, 350 or 400.

This is then followed by a two digit number designating section thickness. This would be “10” for 1.0mm BMT, up to “30” for 3.0mm BMT.

LYSAGHT SUPAZED® 200 millimetres nominal depth and 1.2 BMT.Where reference is made to both purlin shapes of the same size then designation such as SZ/SC is used, similarly for other shapes.

ProductAvailability


Non-Standard purlin options (Subject to enquiry in Qld)

Non-Standard purlin options are available subject to enquiry. These non-standard options are available on special projects only and will be subject to minimum order quantities and extended lead times.

LYSAGHT SUPAZEDS and SUPACEES are accurately roll-formed from high-strength zinc-coated steel to provide an efficient, lightweight, economical roofing and cladding support system for framed structures.

The system includes HOOK-LOK® II Bridging, LYSAGHT Big Cee Bridging, and a wide range of accessories. It is supplied ready for erection.

Available in NT from manufacturing site in SA with a two week lead time.

Made in Qld, NSW and SA.

Dimensions of LYSAGHT SUPAZEDs and SUPACEEs

D

t

D

B

LB

t

Note: Dimensions have been rounded off to the nearest 0.5mm.

ProductAvailability

Dimensions of SUPAZEDs and SUPACEEs Product Code Mass per unit SUPAZEDS/SUPACEES Code Length (kg/m) t D SZ15010/ SC15010 1.0 152 2.38SZ15012/ SC15012 1.2 152 2.89SZ15015/ SC15015 1.5 152 3.58SZ15019/ SC15019 1.9 152 4.51SZ15024/ SC15024 2.4 152 5.67

SZ20012/ SC20012 1.2 203 3.62SZ20015/ SC20015 1.5 203 4.49SZ20019/ SC20019 1.9 203 5.73SZ20024/ SC20024 2.4 203 7.20

SZ25015/ SC25015 1.5 254 5.16SZ25019/ SC25019 1.9 254 6.50SZ25024/ SC25024 2.4 254 8.16

SZ30019/ SC30019 1.9 300 8.02SZ30024/ SC30024 2.4 300 10.09SZ30030/ SC30030 3.0 300 12.56

SZ35024/ SC35024 2.4 350 12.20SZ35030/ SC35030 3.0 350 15.19

SZ40024/ SC40024 2.4 400 13.15SZ40030/ SC40030 3.0 400 16.45

Available in Victoria via Metalform.


Stru

ctur

al P

rodu

cts

The holes punched in the webs are located at the accepted industry standard gauge lines. The gauge lines are as detailed below and the holes are equally spaced above and below the centreline of the purlin.

Purlin Gauge line (G)Nominal Size (mm) 100 40150 60 (70*)200 110250 160300 210350 260400 (Qld/SA only) 310(*denotes size in Victoria)

Hole gauge lines

Purlin AccessoriesThere is a range of LYSAGHT accessories available for use with the LYSAGHT purlins. These accessories are an integral part of the LYSAGHT purlin and girt system. All LYSAGHT accessories are zinc-coated steel.

Purlin bolts

Bolts with integral washers in both the head and nut shall be used for all types of connections described in this manual as required by AS/NZS 4600, Clause 5.3.1

M12 size

PB1230 LYSAGHT standard purlin bolt (grade 4.6): M12 x 30mm with nut.

PB1230HS LYSAGHT high-strength purlin bolt (grade 8.8): M12 x 30mm with nut.

M16 size

PB1645 LYSAGHT standard purlin bolt (grade 4.6): M16 x 45mm with nut (Grade 8.8 available subject to enquiry.)

NOTE: GPB300GPB is available in Queensland. Please contact your local service centre.

1 1 1 1 1 1Product Code

A1

B1

C1

D1

E1

F1

6 holes18 mm diameter

3535

General purpose bracket

ProductAvailability

ProductAvailability

* Denotes size in Victoria


Angle connectorsThe angle connectors are detailed to allow connections of sections of the same size or one size smaller.

Clamp platesUsed in conjunction with angle connectors and racking girt bracket to allow connections to the lips of Cee purlins.

Racking Girt BracketProduct Code RGB100 The Racking Girt Bracket is used to attach the ends of the C10015 Racking

formed at right angles, as shown, and is formed on-site by the erector to the correct angle to suit to roof slope.

Other accessoriesThere are other accessories that may be available subject to enquiry, and these may be subject to minimum order quantities and extended lead times.These other accessories may include:

fascia application

lip

Racking GirtThe racking girt is simply a C10015 purlin profile. The racking girt bracket has been dimensioned to suit this girt.

70

25

70

90 mm for Product Code AC100140 mm for Product Code AC150

NOTE: PAC300 is available in Qld. Please contact your local service centre.

70

35

35

18

35 40

15

70

70

70 50

70240

190

Product Code

AC100AC150

Product Code

AC200

Product Code

AC250

54

25

B

18

A25

Product CodeCP100

Prod. Code A(mm) B(mm)CP150 140 15CP200 190 15CP250 240 40

90

185

135

40 7025

40

25

18

102

51

13.5

Also comes in 100mm size.

Also comes in 150, 200 and 250 mm sizes.

ProductAvailability


LYSAGHT HOOK-LOK® II Bridging members - Typical component combinations

P channelC

clampend

Llocator

endStandard bridge(clamp/locator)

Standard bridge(bolted) P channel

Bbracket

end

Bbracket

end

FIX

ED

LE

NG

TH

D channel

Fbracket

end

Bbracket

end

Cclampend

Llocator

end

Adjustablefascia bridge

AD

JUS

TA

BL

EL

EN

GT

H

Adjustablebridge

Expansion joint/ridge tie

Girt foot

Pivot end bridgingfor curved roof

Tie rod

Turnbuckle/ridge tie

Girt hanger

Bbracket

end

Cclampend

Llocator

end

Bbracket

end

Cclampend

Llocator

end

S c

hann

el

Bbracket

endC

clampend

Llocator

end

T turnbuckle

T T

urnb

uckl

e

B bracket end

C clamp end

L locator end

B bracket end

C clamp end

L locator end

Bbracket end

Bbracket end

Cclampend

Bbracket

end

Cclampend

L locatorend

Bbracket

end

Cclampend

Llocator

end

Bbracket

end

Bbracket end

Cclampend

Llocator

end

S channel

S c

hann

el

Gbracket end

†

†

†

†

P channel

† †

† clinched connection

L locatorend

bolt connection

D channel

T T

urnb

uckl

e

T turnbuckle Bbracket end

Cclampend

Bbracket

end

Cclampend

L locatorend

L locatorend

Bbracket

endC

clampend

Llocator

end

†

either clinched or bolt connection

S channel

S channel

B bracket end

C clamp end

L locator end

Other

Girt bridging options

OR

OR

HOOK-LOK II Bridging - Minimum lengths (mm)* Purlin DepthBridging member 100 150 200 250Standard C-L ends 240 200 200 200Standard bolted 450 450 200 200Girt hangers 450 450 450 450Girt foot 300 300 300 300Turnbuckle ridge tie 500 500 500 500Adjustable bridging 500 500 500 500Tie rod 200 200 200 200

* Refer to local service centre office in your state.

ProductAvailability

Stru

ctur

al P

rodu

cts


How to specify HOOK-LOK II partsPads of LYSAGHT HOOK-LOK II order forms are available from your local representative.When specifying HOOK-LOK II bridging assemblies:1. Specify the HOOK-LOK II prefix H2.2. Specify left hand end component – always three characters

(e.g. C20)3. Specify the type of bridging channel – always one character

(e.g. P)4. Specify right hand end component – three characters (e.g.

L20)Putting these together, you would get: H2 C2O P L20.

Example 1An adjustable bridging, with clamp to suit a C15015 purlin at one end and a bolted bracket to suit a C20024 purlin at the other end would be: H2 C15 T B20.

(This assumes that the order was not for use in Victoria where the product code would be H2 C1V T B20 – * see note to Product Codes table.)

Example 2

ProductAvailability

ProductAvailability

Product codes for HOOK-LOK II parts

Clamp endCODE C

Locator endCODE L

FasciabracketsCODE F

BoltedbracketsCODE B

TurnbuckleCODE T

Tie rodCODE R

Bridgingchannel:

plainCODE P

Bridgingchannel:slotted

CODE S

Bridgingchannel:double

CODE D

Girt bracketCODE G

Mark No.

C10C15C1V*C20C25

L10L15L1V*L20L25

F20F25

Mark No.

B10B15

B20B25

T10†T12†

R12†R16†

Mark No.

P

S

D

G

* For Victoria, 150 size bridging is specified using a 'V' instead of the '5'† 10,12 or 16 refer to rod diameter in mm

This is a bridging system used with the larger 300 and 350 sections.

The components consist of a C15015 or SC15015 channel and bridging ends assembled with LYSAGHT high strength M12 x 30mm purlin bolts.

All components are galvanised for long life and can be assembled using the recommended bolts.

When ordering, the overall bridging length should be specified, i.e. purlin or girt spacing, less 3mm.

Catalogue numbers for this bridging are:

LYSAGHT Series 300 and 350 bridging system

LYSAGHT HOOK-LOK II


Fascia Purlin FP23019

One-piece fascias are easy solutions to the

needs of buildings with bigger portal

fame spacings.

formed, from higher tensile

and is stronger.

Punching

normally supplied

normally not punched, but can be punched if ordered.

Fascia Purlin FP26015Dimensions vary from state to state. Not standard. Used with Z or C250. Not available in Vic. or WA. Subject to enquiry in NSW.

Associated purlin products

NOTE: Dimensions vary from state to state. Contact your local service centre for details of fascia purlin range.Subject to enquiry in WA.

Nominate anglerequired.

ProductAvailability

ProductAvailability

ProductAvailability

In WA, order C15019, C20019 or C25019 purlin and

nominate angle required to match roof slope.

Stru

ctur

al P

rodu

cts


LYSAGHT TOPSPAN® light structural sections are the economical alternative to timber battens. They are lighter than timber and frequently used for roofing, sheds and garages.

Storage, carrying and handling of TOPSPAN sections are easier, because they nest together. There is no need to cut to length because the sections can be lapped.

MaterialSteel grade: G550 Coating: AZ150Other BMTs may be available - enquire at your local sales office.

TOPSPAN 61BMT

0.75, 1.00Length

75006100 (W.A. only -custom cut

to length)Other BMT subject to

enquiry.

TOPSPAN 96* BMT

0.75, 1.001.20

Length7500

TOPSPAN 120BMT

0.70, 0.901.00

Custom cut to lengthOther BMT subject to

enquiry.

LYSAGHT TOPSPAN light steel sections

75

32

40

1490

42

40

15

63

29

22

11.5 619

28

22

117

32

96

14102.5

36.5

61

14169

40

120

26

ProductAvailability

See notesfor product.

* Note: Product availability is subject to enquiry. Refer to your local service centre.

Associated top hat productsTOPSPAN 50*

BMT0.75‡

Length7500

6100 (W.A. only)‡Used in cyclonic areas88

25

50

20

In SA, an alternative roof batten and ceiling batten are available. Please refer to your local office for details.

TOPSPAN 22*BMT0.42

Length6100

TOPSPAN 22 QldBMT0.42

Length6100

TOPSPAN 40BMT

0.55, 0.75‡Length

7500‡Used in cyclonic areas

TOPSPAN 40 Vic* BMT0.55

Length6000


ProductAvailabilityLYSAGHT Structural steel decks

BlueScope Lysaght offers two structural steel decks each with a broad range of applications - LYSAGHT BONDEK® and LYSAGHT POWERDEK®.

This table compares the LYSAGHT decks with each other to highlight where they are best utilised.

Comparisons of spans, concrete displacement, fire performance and other important criteria are included here.

Cover Depth BMT Slab thickness UnproppedProfile

(mm) (mm) (mm) minimum (mm) Span (mm)

590 540.6

0.75 90 up to 3400

up to 5200

up to 6000

1.0

300 100

1.0 140

1.2

1.5

1.5 300

120 1.2

160

depthcover

cover

depth

BONDEK

POWERDEK (Available subject to enquiry)

LYSAGHT POWERDEK (Subject to enquiry)

ProductAvailability

cover

depth

Dimensions Depth = 100 or 120 mm Cover Width = 300 mm POWERDEK® 100 depth = 100mm POWERDEK® 120 depth = 120mm

Project based by enquiry only.

This data is the result of full scale testing, analysis and design comparisons at our NATA-registered laboratory and associated academic research centres.

By understanding the relative strengths of each product, the specifier can choose the one most suitable for the job.

LYSAGHT POWERDEK will revolutionise how you design with concrete slabs. LYSAGHT POWERDEK gives you significantly increased unpropped spans (up to 6.0m) and substantially increased load carrying capacities.

A positive interlocking rib provides a strong, secure working platform. Because the profiles are encased in concrete, they have exceptional fire performance, with no extra reinforcement required for up to a 3 hour fire rating.

LYSAGHT POWERDEK steel decking profiles have sufficient shear bond capacity for imposed loads 30 kPa and more.

Available subject to enquiry. Extended lead times and minimum order quantities apply. Refer to your local service centre for details.

Base materials and coating massSteel grade: 1.0mm BMT: G550, Z2751.2 mm BMT: G500, Z2751.5mm BMT: G450, Z275Lengths(Custom cut lengths up to 10m.)MassPOWERDEK 100 1.0 18.56kg/m2POWERDEK 100 1.2 22.14kg/m2POWERDEK 100 1.5 27.51kg/m2POWERDEK 120 1.2 23.50kg/m2POWERDEK 120 1.5 29.20kg/m2TolerancesLength: On application.FinishesHot dipped zinc coated Z275.

Stru

ctur

al P

rodu

cts


LYSAGHT BONDEK

590 mm cover

54 mm

BONDEK® is a formwork and bottom reinforcement system for concrete slab construction, suitable for domestic and major building projects. It is more economical than conventional formwork, fast to install, and allows easy fixing of ceilings and services. Structurally, BONDEK replaces usual bottom reinforcement.

Base materials and coating massSteel grade: G5500.6, 0.75, 0.9 &1.0 mm BMT: Z350 (0.9 mm BMT subject to enquiry.)

LengthsCustom cut lengths from 1200 to 17,000 mm. Note: Qld maximum length 10,000 mm.

Dimensions Depth = 54 mm Cover Width = 590 mm Mass BMT 0.6 mm: 8.52 kg/m2

BMT 0.75 mm: 10.50 kg/m2

BMT 0.9 mm: TBC kg/m2

BMT 1.0 mm: 13.79 kg/m2

TolerancesLength: + 0 mm, – 10 mmFinishesStandard is Galvanised Z350. BRITEWITE®, a pre-painted underside, can be made to special order.

BonfillPolystyrene foam stops concreteand air entering ends of ribs.Stock length: 1200mmRequired: 300mm per sheet of BONDEK.

BonwedgeLightweight bracket for rodsto suspend ceilings or services(other than fire sprinkler systems).Max. load: 100 kg

End plug Polyethylene end plug stops concrete and air from entering end of BONDEK ribs.

Bon-nutHeavy duty square nut tosuspend ceilings or services.Glued to a paper strip it makes insertion easy.Threads: M8, M10 and M12. M6 is available for light loads only (2.7 kN or less)

21.5

8.5

BONDEK Safe loadBMT (kN)0.75 4.41.00 6.7

Post tensioning clipAllows BONDEK composite slabsto be post-tensioned.

Sealing TapeTape is used to seal gapsto prevent leakage ofwet concrete.

BonstripPlastic trim to covergaps formed by ribs.Used when underside ofBONDEK forms an exposed ceiling.Stock length: 3000 mm. Allows Gyprock® to be fixed to BONDEK.

EDGEFORMA galvanised section that creates a permanent formwork atthe slab edges—cut, mitred and screwed on site.

ProductAvailability

BONDEK accessories


LYSAGHT Cold-formed Sections: Standard LYSAGHT cold-formed sections are roll-formed in three shapes: angles, plain channels and lipped channels. They have many uses in the construction, general fabrication and home handyperson fields. Subject to enquiry in Qld & NSW.

Materials

stress, 275 g/m2 minimum coating mass).

Lengths: All sizes: 6m

Custom made lengths on application.

Non standard lengths will come in the same pack sizes as the standard lengths.

Angles

Plain channels

Lipped channels

Availability in NSW is subject to enquiry.

Product Code Size BMT Mass Uncoated Zincform LA 4630 46 x 35 3.0 1.79 Yes Yes LA 5130 51 x 30 3.0 1.79 Yes N/A

Product Code Size BMT Mass Uncoated Zincform LC 05130 51 x 25 3.0 2.15 Yes Yes LC 07630 76 x 38 3.0 3.34 Yes Yes LC 08330 83 x 34 3.0 3.34 Yes Yes LC 08930 89 x 31 3.0 3.34 Yes Yes LC 09530 95 x 37 3.0 3.70 Yes Yes LC 10330 103 x 34 3.0 3.70 Yes Yes LC 10230 102 x 55 3.0 4.77 Yes Yes LC 12730 127 x 50 3.0 5.24 Yes Yes LC 15230 152 x 51 3.0 5.84 Yes Yes

Product Code Size BMT Mass Uncoated Zincform LL 10230 102 x 51 3.0 5.24 Yes Yes LL 12730 152 x 64 3.0 5.84 Yes Yes LL 15230 152 x 64 3.0 7.15 Yes Yes LL 20330 203 x 76 3.0 9.06 Yes Yes LL 25430 254 x 89 3.0 10.83 Yes Yes

LYSAGHT HANDY-C systemThe HANDY-C® system takes the place of timber supports for roof and wall cladding in lightweight structures. It comes complete with channels, cleats, bracing and self-drilling screws.

Parts

HANDY C cleat is available separately in NSW.

head 14 - 10 x 20

by customer to suit purlin.)

ProductAvailability

ProductAvailability

Stru

ctur

al P

rodu

cts


LYSAGHT INTERLOK II

INTERLOK II steel grating is an innovative and economical interlocking grating system that is suitable for a wide range of applications such as racking, shelving, walkways, catwalks, platforms, ramps and decking.There are male-male and male-female planks, as well as joining and installation accessories. DimensionsThe basic ‘plank’ is nominally 225mm wide x 65mm high, and is available in either anti-skid (raised ‘teeth’ on bars) or plain. LengthsStock length = 6075mm.Lengths from 497mm to 10800mm can be made to special order, in rib width multiples. Lengths less than 6075mm incur an extra cutting charge. Catalogue number & BMTG06512: BMT = 1.2mmG06520: BMT = 2.0mm MaterialZinc-coated steel to AS1397, G300, Z450 (300 MPa minimum yield stress, 450-g/m2 minimum coating mass).

Heavy duty Extra heavy duty

INTERLOK II stair treads are made from INTERLOK G06520 with welded carrier plates. The extra heavy duty treads have a floor plate nosing. They are quick and easy to install.

Not available in W.A.

Male-male plank Male-female plank

65 m

m

65 m

m

225 mm(nominal)

225 mm(nominal)

LYSAGHT INTERLOK II stair treads

CatalogueProduct Number Heel/toe side plate G170S

Heel/toe end plate G170E

Carrier plate G056CP

End plate G065EP

Splice plate G065SP

Hold down clip G065HDC

Heel/toe end plate bracket G065EB

J bolt, nut, washer G000JB

G006HBHex. head bolts, washers & nuts G010HB G012HB

Accessories

ProductAvailability

ProductAvailability

INTERLOK stair treads


Stru

ctur

al P

rodu

cts

LYSAGHT SUPRATRUSS componentsLYSAGHT SUPRATRUSS® is an engineered roof framing system made accurately from high tensile steel. Steel trusses don’t rot, shrink or burn, and termites don’t eat them.

BlueScope Lysaght does not design and fabricate trusses - we can refer you to an alternative supplier if required.

The following sections are available in these standard lengths

nearest service centre.

SUPRATRUSS chord BMT (mm) Section Stocked lengths* Pack sizes0.6 75 x 38 7500 50

SUPRATRUSS web(Not available in NSW)

BMT(mm) Section Stocked lengths* Pack sizes0.75 51 x 28 Made to order 50

Boxed rafter

BMT(mm) Section Stocked lengths* Pack sizes0.48 70 x 38 Made to order 500.48 75 x 38 7500 500.48 90 x 38 7500 40

Universal bracket 70

Universal bracket 140

Pack size100

Pack size40

* Non-standard lengths: 1800mm minimum, 12000mm maximum (7500mm maximum in NSW)

ProductAvailability


LYSAGHT SUPRAFRAME components® is an engineered wall framing system

made accurately from high tensile steel. Steel walls don’t rot, shrink or burn, and termites don’t eat them.

BlueScope Lysaght does not design and fabricate frames - we can refer you to an alternative supplier if required.

Boxed stud BMT (mm) Section Stocked lengths* Pack sizes0.48 70 x 38 2408, 2443, 2708, 2743, 7500 500.48 75 x 38 Made to order* 500.48 90 x 38 2408, 2443, 2708, 2743, 7500 40

Open studBMT (mm) Section Stocked lengths* Pack sizes0.55 75 x 38 2408, 2443, 2708, 2743, 7500 60

0.55 ‡ 70 x 38 Made to order* 60

0.75 75 x 38 Made to order* 60

0.55 ‡ 90 x 38 Made to order* 60

0.75 ‡ 90 x 38 Made to order* 60 ‡ Not available in NSW

Plate BMT (mm) Section Stocked lengths* Pack sizes0.75 70 x 35 7500 500.75 70 x 65 7500 501.0 70 x 65 7500 50

0.75 75 x 35 7500 500.75 75 x 65 7500 501.0 75 x 65 7500 50

0.75 90 x 35 7500 501.0 90 x 65 7500 50

* Non-standard lengths: 1800mm minimum, 12000mm maximum, 7500mm maximum in NSW

ProductAvailability


Hou

se F

ram

ing

Nogging

Lintel

Trim angle

Nogging clipPack size 900

Tensioner setPack size 100

Brick tieGalvanised steel Pack size 500Stainless steel‡ Pack size 500

A different style is available in SA. ‡Not available in NSW

Plumbing grommetPack size 2000

Electrical grommetPack size 2000

BMT Section Stocked lengths Pack sizes0.48 20 x 22 6100 20

BMT Section Stocked lengths Pack sizes1.0 200 x 35 6000 251.5 200 x 35 6000 25

BMT Section Stocked lengths Pack sizes1.0 35 x 35 4800 401.0 35 x 35 5800 40

Round washer32-mm x 2.5 with 6-mm hole. Galvanised steel.

Pack size 500

ProductAvailability


LYSAGHT Steel building frame (SBF) components

LYSAGHT SMARTRUSS®

This is a system of components that can be used for fabrication into wall, roof and floor frames. The members are strong, accurate, light and stable, and lend themselves to fast assembly.

Steel frames won’t warp, twist, shrink, rot, or split, and are termite and fire proof.

MaterialWith the exception of the cyclonic stud, the components of this system are made from G300 ZINCALUME® or GALVABOND® steel that is easily weldable.

AvailabilityAsk your local BlueScope Lysaght office about product availability in your area.

The SMARTRUSS system is comprised of:

®

®

®

AvailabilityAsk your local BlueScope Lysaght office about product availability in your area.

Made in NT and Nth Qld.

ProductAvailability

Truss top chord

Top plate

Nogging

Concrete slab

Cross bracing

Common stud

Lintel

HeadSill

Jamb studs

Bottomplate

Truss web

Truss bottom chord

Floor bearer

Floor joist

ProductAvailability


Hou

se F

ram

ing

LYSAGHT QUIKA-FLOOR® is a flooring

system primarily used for domestic applications. It uses steel columns with steel floor bearers and joists which may be chosen from the profiles shown on this page.

®, in COLORBOND® steel or ZINCALUME® finish is usually used in verandahs, carports and patios.

There are ® publications for design and spanning information.

Sub-floor bracingWhere sub-floor bracing is req. a 50 x 50 x 2.5 DURAGAL® angle is recommended although flat strapping may also be used.

Accessories

35 x 1.5 x 3600

QUIKA-BEARER brackets

QUIKA-BEARERS/JOISTS

Material to AS 1397 as follows:

BMT Steel grade1.9, 2.4 G450, Z3502.5 G300, Z275

Code No. D W t

QUIKA-JOIST

Material to AS 1397 G550, AZ150

Code No. BMT

FIRMLOK bearers/joists

Material to AS 1397 G550, AZ150

Code No. D W t

W

D

t

40

120

149

t

W

Dt

ProductAvailability


LYSAGHT Fencing: Non-cyclonicLYSAGHT fences are attractive, economical, versatile and durable. And they’re easy to install.There are four ranges in the standard range of fences: NEETASCREEN®, SMARTASCREEN®, CUSTOMSCREEN® and MINISCREEN®. When they are supplied with a lattice, pickets or slats, they are called NEETASCREEN PLUS, SMARTASCREEN PLUS, CUSTOMSCREEN PLUS and MINISCREEN PLUS. All fence types are complemented by our range of gates, designed to harmonise perfectly. The gates are available with optional high quality handles and key-operable locks. HeightsNominal heights of fences are 1200, 1500, 1800 and 2100mm from top of top rail to bottom of bottom rail. (1200mm height is not available in NSW.) The bottom rail should be nominally 50mm above ground level ColoursAsk for the current range of COLORBOND® steel fence colours. Selection Use our selection and installation guide to determine your needs.

Product Availability

NEETASCREEN NEETASCREEN PLUS WITH PICKETS NEETASCREEN PLUS WITH SLATS

SMARTASCREEN SMARTASCREEN PLUS WITH LATTICE SMARTASCREEN WITH GATE

MINISCREEN MINISCREEN PLUS MINISCREEN WITH GATE

CUSTOMSCREEN CUSTOMSCREEN PLUS WITH LATTICE

MANDALAY

QLD NSW VIC TAS SA NT WANEETASCREEN Standard NEETASCREEN PLUS with Lattice NEETASCREEN PLUS with Infill Slats NEETASCREEN PLUS with Picket

SMARTASCREEN Standard SMARTASCREEN PLUS with Lattice SMARTASCREEN PLUS with Infill Slats SMARTASCREEN PLUS with Picket

MINISCREEN Standard MINISCREEN PLUS with Lattice MINISCREEN PLUS with Infill Slats MINISCREEN PLUS with Picket

CUSTOMSCREEN Standard CUSTOMSCREEN PLUS with Lattice CUSTOMSCREEN PLUS with Infill Slats CUSTOMSCREEN PLUS with Picket

MANDALAY Standard NEETALOK (Cyclonic)


Fenc

es

1200

84

43

53

60

48

60

25

38

29

Posts Standard lengths 2100, 2400, 2700 & 3000mm (and 1800mm available in S.E. Qld)

Infill sheets Standard lengths 1490, 1790 & 2090mmNEETASCREENrange

†Rails Standard lengths 815, 1575, 2350 & 3100mm for SMARTASCREEN & NEETASCREEN840, 1585, 2350 & 3100mm for MINISCREEN840, 1605, 2370 AND 3100mm FOR CUSTOMSCREEN

Post caps

Fasteners

MINISCREEN universal rail

CUSTOMSCREEN universal rail

LYSAGHTpost cap

(cut with knifeto get single caps)

Ball cap Ripple Tek® RippleZip® screw 10—16 x 20 (MINISCREEN range only)

Self-drilling, self tapping hex. washer-head screws10—16 x 16 (All fence types)12—14 x 45 (Fence Type 3 and extra wide gate)

PostcoverstripStandardlength2400mm

(Used as top & bottomrail & middle rail forNEETASCREEN PLUS &SMARTASCREEN PLUS)(38 x 38 x 1.2 in SA)

(Used as top & bottomrail & middle rail forMINISCREEN PLUS)

(Used as top & bottomrail & middle rail forCUSTOMSCREEN PLUS)(38 x 25 x 1.6 in SA)

MINISCREENrange

616

38

60

Standardpost

Insert cap(for square post)

Post

s

Post

s

Post

s

NEETASCREENSMARTASCREEN &CUSTOMSCREEN

NEETASCREEN PLUSSMARTASCREEN PLUS &CUSTOMSCREEN PLUS

MINISCREEN MINISCREEN PLUS

Univers

al rail

Infill sheetInfill sheet(NEETASCREENshown) Infill sheet

Ballcap

Post

s

Lattice

Centre rail

Centre rail

Lysaghtpost cap Lysaght

post cap

Ballcap

Standardpoststiffener(Fence Types2 & 3)

Self-drilling, self tappinglong drill bit hex. head screw12—24 x 32 (Fence Types 2 & 3)

LatticeStandard length 2350 mmNEETASCREEN PLUSMINISCREEN PLUS

300

nom

inal

Univers

al rai

l

Universal

rail

Universa

l rail

Universa

l rail

Universal

rail

Universal

rail

Universal

rail

Universal

rail

Lattice

Universa

l rail

MINISCREEN centre rail(38 x 25mm)

Square postCorner junctions &

single gates 60 x 60 x 1.6(50 x 50 x 1.6 in SA)

Extra wide gates65 x 65 x 2.5

Length 2400 & 3000mm

28

SMARTASCREENrange

Infill sheet(NEETASCREENshown)

SMARTASCREEN & NEETASCREEN

universal rail

CUSTOMSCREENrange

†

or

LYSAGHT fence components


LYSAGHT MANDALAY® fence

LYSAGHT Fencing: Cyclonic & High Wind ConditionsLYSAGHT cyclonic fences are based on our well respected NEETASCREEN fences.There is one family: NEETASCREEN and NEETASCREEN PLUS (the latter is topped with a lattice panel). There are two configurations.NEETALOK® is specifically designed for use in wind region D.NEETASCREEN is available in Qld & NT only, NEETALOK® is only available in WA.

HeightsNominal heights of fences are 1500 and 1800 mm from top of top rail to bottom of bottom rail. The bottom rail should be nominally 50 mm above ground level.ColoursAsk for the current range of COLORBOND® steel colours. SelectionUse our selection and installation guide to determine your needs.

ProductAvailability

ProductAvailability

MANDALAY® fence utilises LYSAGHT universal posts and rails - slats can be retrofitted to give an existing fence a modern face-lift.

Available in 1200mm, 1500mm and 1800mm full fencing heights and a 300mm size to place at the top of a traditional COLORBOND steel fence as a decorative feature.

More cost effective than powder-coated aluminium and more durable than timber.

Requires minimal maintenance and no painting – just a regular wash down.


LYSAGHT cyclonic fence options

NEETASCREEN TYPE 3 FENCE

LYSAGHT post cap

NEETALOK FENCE

NEETASCREENstandard postStandard lengths:2100, 2400, 2700

& 3000 mm

Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.42

NEETALOK brackets

Stiffeners (1200 mm long)

NEETASCREEN PLUS TYPE 3 FENCE

Lysaght post cap (cut in half)

Domed cap

Square post (optional at

corner junctions) Minimum 60 x 60 x 1.6

Domed cap

Self-drilling, self tapping hex. washer-head screws

10—16 x 25 12—14 x 45

NEETASCREEN universal rail Standard length 2350 mm (2 places)

Rectangular post 100 x 50 mm

2.0, 2.5, 3.5 mm BMT Standard lengths:

2400, 2700 & 3000 mm

Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.35

NEETASCREEN standard posts Standard lengths:

2100, 2400, 2700 & 3000 mm

NEETASCREEN universal railStandard length 1575 mm(2 places)



Domed cap

NEETASCREEN standard posts Standard lengths:

2100, 2400, 2700 & 3000 mm

Stiffeners (1200 mm long)

NEETASCREEN universal railStandard length 1575 mm(3 places)

LatticeStandard length 1575 mm

Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.35 Self-drilling, self tapping

hex. washer-head screws 10—16 x 16 12—14 x 45

Self-drilling, self tapping long drill bit hex. head screw

12—24 x 32



Domed cap

Self-drilling, self tapping hex. washer-head screws

10—16 x 16 12—14 x 45

Self-drilling, self tapping long drill bit hex. head screw

12—24 x 32

NEETALOK raking

adaptors

Ball cap

ProductAvailability

Fanc

ing


LYSAGHT gate optionsLYSAGHT gates are quick and easy to install. They are designed to fit perfectly with the NEETASCREEN®, SMARTASCREEN®, CUSTOMSCREEN® and MINISCREEN® range of fences.

There are a range of options to choose from.

The gates are ordered by specifying:

1. Single width or double gate

2. Specify colour & height of gate stiles, rail & infill sheet

3. Standard width or extra wide

4. Specify accessory kit

(External Accessory Kit in Qld)

5. If lattice required (Plus fence) specify colour

6. Specify optional extras if required

Gate widths for NEETASCREEN, SMARTASCREEN & CUSTOMSCREEN

Single gates: 885 mm

Extra-wide gates: 1645 mm

Two extra-wide gates are needed for a typical driveway

NEETASCREEN fences can be reduced in width by increments of 190 mm.

can be reduced in width by increments of 128 mm.

CUSTOMSCREEN fences can be reduced in width by increments of 76 mm.

MINISCREEN

Single gates: 910 mm

Extra-wide single gates: 1655mm

Two extra-wide single gates are needed for a typical driveway. MINISCREEN fences can be reduced in width by increments of 25 mm.

Not available in W.A.

NEETASCREEN, SMARTASCREEN & CUSTOMSCREEN gate options (NEETASCREEN shown)

Stile

Bottom rail

Top rail

Stile

Infil

l she

et

Stile

Bottom rail

Top railSt

ile

SINGLE GATE EXTRA-WIDE SINGLE GATE

Infil

l she

et

Infil

l she

et

Premium Gate Accessory Kita) Single Gate Accessory kit (GK5):Lokk-Latch Pro set (key, lock both sides)HandleHinge (black)Accessory Screws (black #10-24x16 Wafer Heads)Stile Caps (plug type)b) Double Gate Accessory Supplement Kit (GK4):Hinge (black)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)

Extras:Infill SheetLattice-short (815 Neeta & Smarta, 840 Custom, 905 Mini)Lattice-long (1575 Neeta & Smarta, 1604 Custom,1675 Mini)

Optional Extras:Tubular Gate Post + Cap (60x60)Tubular Gate Post + Cap (65x65)Drop Bolt (zinc)Edge Cover Strip (additional for lattice &/or Infill sheet)Screws (#12-14x45 Hex Heads)

Gate Accessory Kit - Contents

a] Single Gate Accessory kit (GK1):Locking set - D-latch with extension handle + striker, (zinc)Hinge (zinc)Striker Cover (anti-rattle)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)b] Double Gate Accessory Supplement Kit (GK2):Hinge (zinc)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)Standard Gate Accessory Kit:a] Single Gate Accessory kit (GK3):Lokk-Latch set (key, lock one side)HandleHinge (black)Accessory Screws (black #10-24x16 Wafer Heads)Stile Caps (plug type)b] Double Gate Accessory Supplement Kit (GK4):Hinge (black)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)

Quantity of items in each kit depends upon whether it is a single, double or extra-wide gate, and if it has a lattice (Plus). Check with your local distributor for specified quantities for your requirement.

Economy Gate Accessory Kit:

SMARTASCREEN gate illustrated above.

ProductAvailability


Fenc

es

Infil

l she

et

Stile

Bottom rail

Top rail

Latti

ce

Lower top rail

Infil

l she

et

Stile

Bottom rail

Top rail

Latti

ce

Lower top rail

Infil

l she

et

SINGLE GATE

Latticegateclip

Latticegateclip

EXTRA-WIDE SINGLE GATE

NEETASCREEN PLUS & SMARTASCREEN PLUS gate options (NEETASCREEN with lattice shown)

Stile

Infil

l she

et

Stile

Stile

cov

er

Stile

cov

er

Centrerail

& clip

Stile

Infil

l she

et

Stile

cov

er

Stile

Stile

cov

er

Centrerail

& clip

Top rail

Latti

ce

Lower top rail

Top rail

Latti

ce

Lower top rail

Latticegateclip

Latticegateclip

MINISCREEN Plus gate kit

MINISCREEN gate kit

Stile

Infil

l she

et

Stile

Stile

cov

er

Stile

cov

er

Bottom rail

Top rail

Centrerail

& clip

Stile

Infil

l she

et

Stile

cov

er

Bottom rail

Top rail

Stile

Stile

cov

er

Centrerail

& clip

SINGLE GATE EXTRA-WIDE SINGLE GATE

There are additional options available for latches, handles, hinges and locks in the Economy, Standard and Premium Accessories packs. CUSTOMSCREEN/ CUSTOMSCREEN PLUS (not illustrated) is available in SA and Qld only.

ProductAvailability


LYSAGHT HOME IMPROVEMENTS

When you invest in a LYSAGHT Living Collection® addition for your home, you are assured of building with materials engineered and tested to Australian Standards.

Available in a range of architectural styles and modern colours to complement your home, the LYSAGHT Living Collection® features strong and sturdy steel components from Australia’s largest steel manufacturer – BlueScope Steel.

Style and design flexibility is central to the LYSAGHT Living Collection®, which has been created as a complete system. All of the designs can be combined into a format that will suit your home, lifestyle and budget. Matching gutters and downpipes, transluscent sheeting, fasteners and accessories provide a complete package that will enhance the elegant appearance of your extension.

Available as freestanding units or attached to the home, create a personal outdoor living space that will enrich your home and outdoor family entertaining area.

Designs have been focussed on low maintenance, durability, wind resistance, security and privacy – they are also fire, rot and termite resistant. No matter what you’re looking for, a LYSAGHT Living Collection® patio or carport is the ideal addition to your home.

The LYSAGHT Living Collection® is engineered and tested to Australian Standards and developed for maximum aesthetic appearance and structural performance.

Ask about availability and distributor opportunities in your area with your local LYSAGHT representative.

LYSAGHT Home Improvements: Patios, Extensions & Carports

Sit back, relax and enjoy a whole new dimension to your home and enhance your lifestyle with the LYSAGHT Living Collection® range of Patios, Extensions and Carports.

ProductAvailability

Availability in Nth Qld subject to enquiry.


Hom

e Im

prov

emen

t

® is designed to provide a long-span with an attractive ceiling or internal flush finish. It is particularly useful for awning, carport and similar structures.

The unique dovetail rib can be easily fitted by hand.

Receiver channel foam is 50mm x 20mm. Available in 2m lengths with foam inserts between the ribs.






Foam infills

available for sealing the

information, refer brochure.

FinishesA range of COLORBOND® steel colours, refer to your local stockist for colour selection available. Also available in Hi-Gloss finish on underside.


Made in NSW & SA.

LYSAGHT FLATDEK

LYSAGHT FLATDEK II

250mm cover

45mm

is a long double span cladding making it particularly well suited to many types of home improvement projects like room additions, carports and awnings.

The underside of II features clean uninterrupted lines, with an attractive gloss

and save time. II combines all the

aesthetic benefits of , with the additional benefit of faster installation and fewer laps.

The unique overlapping dovetail ribs of the II profile can be easily fitted together by hand. Receiver channel foam is 50mm x 10mm. Available in 5m lengths.


LengthsLengths are custom cut. Maximum length 8000mmMinimum length 850mm




FinishesA range of COLORBOND® steel colours, refer to your local stockist for colour selection available. Also available in Hi-Gloss finish on underside.


Made in Qld

ProductAvailability

ProductAvailability


LYSAGHT FIRMLOK® beam is a light, strong structural beam, and

universal in its applications. It is developed for maximum aesthetic and structural performance. The unique interlocking Cee profiles provide a universal structural member with excellent spanning capacity once fixed into position.

Identification

The format of the number code is:

F D t xxx xx

depth D (mm) (mm) beam with depth of 150mm and 2t

thickness of .75mm = 1.5 BMT

Finishes

beams are available in ZINCALUME® steel and several high gloss colours in COLORBOND® steel.

universal brackets are also available powder coated to match COLORBOND® steel colours.

The apex bracket is available in galvanised only.

Base materials

Steel grade: G550Coating: AZ150BMT: 0.55, 0.75 & 1.00 mm.

Lengths

Stock lengths of beams are 4000, 5000, 6100, 7500 and 9000 mm. (Not all lengths are available in all centres. See your local service centre for availability.) Extended lead times may apply for non-standard lengths between 1,200 mm & 9,000 mm.

Tolerances

Depth = ± 1 mm

Width = ± 1 mm

Length = + 0, -5 mm

beams are commonly used with ll for carports, verandahs and patios.

Made in NSW and SA

FIRMLOK brackets

50 (nom.)

50 (nom.)

50 (nom.)

FL100-11

FL150-15

FL200-20

NominalD = 100

NominalW = 50

NominalW = 50

NominalW = 50

F100 F150 F200

t

NominalD = 150

NominalD = 200

2t

tt

2t

2t

Universal brackets for different pitches0 to 5º 15º 22.5º

A

A

Apex bracketavailable for

15º and 22.5º pitches

Twin apex bracketavailable for 15º and 22.5º pitches

Collar tie bracket

Column insert

FIRMLOK suspension bracket

ProductAvailability


Hom

e Im

prov

emen

t

LYSAGHT Patio postThe LYSAGHT Patio post is an attractive, fluted aluminium extru-sion designed principally for use with as a verandah post.

There is a matching die-cast foot which is easily fastened to a concrete slab or timber deck.

Colours There is a range of high gloss, powder coated COLORBOND colours.

Stock lengths2400 & 3000 mm SHS sections Consult your local branch regarding the availability of SHS sections from 60 x 60 to 90 x 90.

67 mm�square

Patio post

Patio post foot

ProductAvailability

HEAD OPTION 1

HEAD OPTION 2

TWO�10 – 16 x 16�self-drilling�screws each�side of the�

post into the�post-top�

insert 20 mm

TWO�10 – 16 x 16�self-drilling�screws each�side of the�

post into the�post-top�

insert


Aaccessory sheet 41ant caps 41

Bbatts, insulation 41beams

80blanket insulation. See insulationblind rivets. See fastenersBONDEK 64BONDEK accessories 64box gutter

brackets 41expansion joints 41sumps 41

bridgingHOOK-LOK II 59Series 300 & 350 60

bullnose order form 11

Ccappings

non-standard 28standard 25

ceesSA C-purlin 54purlins & girts 54

chinamans hat 40claddings

general notes 18roof

CUSTOM BLUE ORB 9CUSTOM ORB 9INTEGRITY 820 12KLIP-LOK 700HS 13KLIP-LOK 406 14 KLIP-LOK CLASSIC 15 LONGLINE 305 16SPANDEK 17SPANRIB 17TRIMDEK 18

wallEASYCLAD 20EASYCLAD EH300 21MINI ORB 22 MULTICLAD 21PANELRIB 23TRIMWALL 23WALLCLAD 24Weatherboard 24

Classic - see KLIP-LOK CLASSICcollars 43Colonial gutter 35compatibility of materials 8crimped bend 40curved flashings 3CUSTOM BLUE ORB 9

bullnose order form 11CUSTOM ORB 9

DDEKTITE pipe flashings 41downpipe offsets

round 40square & rectangular 37

downpipesround 38square & rectangular 36

drops (pops)round 39square & rectangular 36

EEASYCLAD 20EASYCLAD EH300 21EASYCLAD trims 20elbows


EMLINE gutter 30enquiries 86

Ffascia, NOVALINE 29fascia purlins 61fastener drive tools 53fasteners

blind rivets 53cyclonic assemblies

screw to steel 45, 49screw to timber 47, 50

non cyclonic screw to steel 44, 48screw to timber 46, 50

fencingcyclonic 74MANDALAY 74gate options 76non-cyclonic 72

80 gutters 34

flashingDEKTITE 41soft zinc 42

flashingscurved 10New South Wales 25non-standard 28Northern Territory 27Queensland 26South Australia 27standard 25Tasmania 25Victoria 26Western Australia 27

flat strips 34

79formwork. See BONDEK, POWERDEK

Ggate options 76girts, zeds & cees 54gutter

box, brackets 41COLONIAL 35EMLINE 30

Half-round 34LYSAGHT OGEE 33Quad 150 & 175 32RANCELINE 35SHEERLINE 31TRIMLINE 30W.A. custom gutters 35

gutter accessories. See under gutter names

gutters, non-standard 28

HHalf-round gutter 34HANDY-C system 65HOOK-LOK II bridging system 59hoop iron 41house framing

68SUPRATRUSS 67SMARTRUSS 70

Iincompatible materials 8infill strips, roof profiles 41insulation

building blanket 41building blanket with foil 41ceiling batts 41reflective foil laminate 41foil tape 41wall batts 41

INTEGRITY 820 12INTERLOK II 66

stair treads 66


KKLIP-LOK 700 HIGH STRENGTH 13KLIP-LOK 406 14 KLIP-LOK CLASSIC 15KLIP-LOK accessories 13, 14, 15

LLapseal 41light steel sections

TOPSPAN 62LONGLINE 305 16LONGLINE 305 Tapered 16louvres 41

MMaintenance (Cladding & RWG) 84 MANDALAY® fence 74 mesh, safety 41MINI ORB 22MINI ORB trims 22MINISCREEN fences 72MULTICLAD 21

NNEETASCREEN fences 72NOVALINE fascia system 29NOVALINE fascia cover 29nozzles


OOGEE (LYSAGHT OGEE) gutter 33overflows 43

PPANELRIB 23Patio post 81pop rivets. See fastenerspops


posts 81POWERDEK 63purlins 54. See also bridging

QQuad 115 (Hi & Lo front) gutter 33 Quad 150 & 175 gutter 32

71

Rrainwater heads 43RANCELINE gutter 35roof collars 43roof infill strips 41

19

Ssafety mesh 41screws. See fastenersSeries 300 & 350 bridging 60SHEERLINE gutter 31sheeting

accessory 41translucent 42

shoesround 39square & rectangular 37

silicone sealant 42soft zinc flashing 42SMARTRUSS 70 SPANDEK 17SPANRIB 17stair treads 66standoff brackets

round 40

strapping 42straps


sumps, box gutter 41SUPACEE 55

SUPAPURLINS 55SUPRATRUSS 67SUPAZED 55

Ttools

fastener drive 53turn-up & turn down 42

TOPSPAN 62transitions 43translucent sheeting 41TRIMDEK 18TRIMLINE gutter 30TRIMWALL 23

U universal nozzle 39

Vventilated ridges 42ventilators

domestic & industrial 42

WWALLCLAD 24WEATHERLOK washers 42Weatherboard 24Warranty (Cladding & RWG) 84

Zzeds & cees (See also SUPAZEDS, SUPACEES)

accessories 54zeds, purlins & girts 54zinc flashing 42

Inde

x


®

1. Access & Safety issues

gutters and flashings.

for foot traffic.

be worn.

* Avoid scratching the surface of the cladding.

2. Maintenance Requirements & Frequency

3. Gutters and Roofing

overflow devices.

Guidelines for roofing and rainwater maintenance

Step 3 Use a soft bristle brush to sweep out the pans. Rinse with water.

Step 6 Ensure all swarf (drill waste) is removed from the work area.

Step 5 Use a hose to quickly rinse the underside of gutters and roofs.

Step 4 The roof cladding should be clean after you rinse.

Step 1 Roof with leaf litter and dirt prior to cleaning.

Step 2 Use a hose to blow away twigs and soften hardened dirt.

Roof maintenance


Mai

nten

ance

As most of our gutters, downpipes, flashings and cappings are also made with COLORBOND steel, they also enjoy a warranty against corrosion to perforation ranging from 10* to 25* years depending upon the application.BlueScope Lysaght have been serving the building industry in Australia for over 150 years. So you can rest assured that your LYSAGHT warranty is your solid guarantee of product

performance in years to come.

(including the maintenance procedures outlined here) please visit:

www.lysaght.com

Cladding and rainwater goods warranties

3) When litter is removed, the layer of hardened dirt is revealed below.

4) Rinse the gutter with water to soften and break up the dirt.

5) Use a soft bristle brush and sweep the dirt out. Rinse again.

6) When the gutter has been cleaned, it should look like this.

1) A typical gutter clogged with leaves, twigs & dirt prior to cleaning.

2) Wear correct protection when clearing leaves and twigs.

Gutter maintenance

With proper installation and regular maintenance, your LYSAGHT roofing, walling and rainwater system products will provide years of trouble-free performance - we guarantee it!Because LYSAGHT claddings are made exclusively with ZINCALUME® or COLORBOND® steel, they are warranted against corrosion to perforation for a period of up to 25* years by BlueScope Steel. So you can rest easy under a LYSAGHT roof made of ZINCALUME® or COLORBOND® steel.And because LYSAGHT rainwater goods are performance tested in our NATA-accredited materials science laboratory, you can be confident that they are 'fit for purpose' and will do the job they are designed for.


WEB

www.lysaght.com

product brochures

TECHNICAL CALL CENTRE

engineers and other building professionals

RESEARCH & TECHNOLOGY

via your local Lysaght Service Centre or technical representative

Service & Support



www.lysaght.com® ® ® ® ®

in® ® ® ® is a registered

Disclaimer, warranties and limitation of liability

offices.

New COLORBOND® steel with THERMATECH™ technologyThe next generation COLORBOND® steel incorporates THERMATECH® technology, which provides a new level of thermal protection by absorbing less heat. Average reduction in solar absorption across all standard colours is 5%.

Now 14 of the 20 standard COLORBOND® steel colours are ‘medium to light’ under the BASIX colour classification, which means reflective foil at the roof may not be required. It also means a drop of roof insulation R rating may be applicable. Refer to your local branch for colour availability for these products.

Documents

Product Part of Australia’s · 6 LYSAGHT Product Catalogue 2011-12 Apron flashing 3EEUNDER&LASHINGS Astragal See straps. Barge A finishing at the gable end of a roof, fixed parallel