Product catalogue JPM

Tippers & DropsiDes

robusTness& LighTness

Tippers& DropsiDes

Kipper& priTschen

4

Symbol of robustness since a long time, the roots of JPM are located in South West France, an area well-known for its long

tradition of forger families.

In the 70s, Jean Paul Massol capitalized on his ancestors‘ knowledge and craftsmanship to build JPM, a body manufac-

turer. Over the years, JPM expanded its product range: rear tippers, three-way-tippers, dropsides and removable tippers

for commercial vehicles from 3,5T. to 7,5T. The whole range is available in steel and in aluminium, whereupon the latter

is more than appreciated, as aluminium products help amongst others to economize fuel and to increase payload thanks

to their little own weight.

sTory

5

In 2007 JPM was acquired by the current co-CEOs of the company, Jean-Marc Feral and Yves Chevalier. With their strong

experiences over 20 years at key positions in international companies, they have decided to bring JPM to a new level of

performance and quality. Admiring the German automotive precision and captivated by the new design trends that

have started to take place in the conversion industry, they have reshaped the brand and company culture of JPM, which

are now summarized in three words: Modern, Elegant and International.

In order to foster its growth, JPM focuses on customer satisfaction and leverages on its dynamic strengths:

¾ Achievement of excellence throughout human resources management in respecting the environment and having

a strongly ethical corporate spirit,

¾ Industrial organization and automatized manufacturing which integrates the latest innovations of welding and

painting process,

¾ On-going development of body technology in keeping in mind the product qualities set by JPM: robustness,

shapely designed, usefulness and reliability,

¾ Commercialization and services thanks to a dealer network in France and throughout Europe.

& company VaLues

6

¾ Manufacturing: products are costly designed and produced on fully automated lines with a high quality level,

¾ Robustness: dimensional calculations and raw material choices insure overload capability,

¾ Shapely designed: JPM‘s will is to develop bodies as aesthetic and beautiful as a truck,

¾ Usefulness: consideration of suggestions and wishes of end-user customers,

¾ Reliability: zero stop and no loss of working hours during daily use of our tippers and dropsides,

¾ Safety: all products are tested in the factory before delivery and relevant documents for the vehicle registration

in Europe are provided.

Thanks to our know-how and our personal and technical possibilities, we are able to continue the fixed objectives in terms

of innovation and success.

proDucT sTraTegy

7

¾ Distribution partner list available on our website.

cooperaTion wiTh VehicLe manufacTurers - DisTribuTion parTners ThroughouT europe

TraDe & serVices

8

sTeaDy innoVaTion

◊ Engineering department with 8 collaborators

◊ Filing of patents and designs every year

sTeaDy inVesTmenT

◊ Investment: approx. 1 Mio. EUR/year since 6 years

◊ Workforce: 140 employees

◊ Surface: 57.800 m²

◊ Production site: 11.500 m²

◊ Warehouse: 2.000 m²

20092010

2008

20112012

20132014

Product range

expansion

up to 7,5T.

Anti-theft device

removable

tipper

Aluminium

dropside

DUAL TRIVA

and

MODULARITYTRIVA

innoVaTion & DeVeLopmenT

9

marKeT LeaDer in france wiTh more Than 50% marKeT share

inDusTriaL proDucTion

◊ 11.500 m² for aluminium and steel processing

◊ Conveying powder spray coating facility

◊ Several welding robots

◊ Automated production planning and control

cusTom-maDe proDucTion

◊ 3.300 m² for custom-made products

◊ Qualified workforce

QuaLiTy & enVironmenT managemenT sysTem

◊ UTAC qualified operator:

Certificate HCT/12.N1017-1

Large opTions & spare parTs warehouse2010 2011 2012 2013 Target

2014

4526

5282 53335950

6500

PRODUCED TIPPERS

faciLiTies

10 www.bennes-jpm.com

11

Three-way-Tipper ............................................................ 10

rear Tipper ...................................................................... 26

remoVabLe Tipper .............................................................. 38

DropsiDe .......................................................................... 46

opTions ........................................................................... 62

cusTom-maDe ................................................................... 84

12

aLuminium

Thr

ee-w

ay

-Tip

pe

r

13

Three-Way-Tipper

¾ In platform integrated lashing points, according to DIN EN 12640, 800 daN

¾ Depending on legal standard/country available optionally

¾ Example: up to length 3.400 mm 6 lashing points, over 3.400 mm 8 lashing points

¾ Sideboards in massive aluminium profiles with ribbed reinforcements, 2.8 mm thick, 400 mm high, fold-down,

removable and interchangeable

¾ Rubber buffer stops on sideboard and rear door hinges, shock-absorbing

¾ Rear corner pillars in steel, cone-shaped, with connecting system and hot-dip galvanized

¾ Self-adjusting, avoids any backlash

¾ Removable at any time, ideal to load up bulky goods

¾ Tipping through tipping hoist with compass system and high lifting capacity

¾ Lateral and rear tilting angle approx. 48°

¾ Tipping speed higher than with a telescopic cylinder and no overlapping of components under subframe

14 *according to our warranty terms

aLuminium

subframe

¾ Aluminium subframe, 6 mm thick

¾ Drilled side members, screwable on vehicle chassis

¾ Tipping through tipping hoist with compass

system

¾ Electro pump unit with cover, perfect protection,

3L oil tank, pressure: 320 bar

¾ Remote control in driver‘s cab, up-/down button

safeTy

¾ Safety solenoid valve on cylinder

¾ Circuit breaker 1.600 watt

¾ Safety strut

¾ Tipping through shoring on ball bearings,

equipped with foolproof system

finish

¾ Coated kit has total coating thickness of 120 µm:

shot-blasting + polyester top coat

¾ Untreated kit

boDy

¾ Platform in aluminium profile 5083 H111, 4 mm

thick, with reinforcements and tubular side

members

¾ Outer frame adapted to strap tension belts

¾ Locking-grips integrated in sideboards, available

with double safety system

¾ Aluminium bulkhead, welded, 450 mm high

¾ Aluminium plank gantry, removable

¾ Rear door in aluminium, 2.8 mm thick, 450 mm

high, automatic opening

¾ Predisposed sideboard extension gusset plates

¾ Polypropylene mudguards, black, including

cataphoretic dip-coating mudguard brackets

¾ Side underrun protection in Aluminium, black

coated, certified according to safety standards

¾ Geomet treated bolts (5 times more resistant

than galvanizing)

Thr

ee-w

ay

-Tip

pe

r

15

Three-Way-Tipper

X

X

X

2.600 mm

3,2T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm

◊ Inside length : from 2.160 to 4.160 mm

◊ Outside length : from 2.200 to 4.200 mm

LifTing capaciTy of Tipping hoisT

3.600 mm 3,7T.

3.200 mm 4,3T.

5,2T.

weighT of KiT

◊ 2.800 mm : 410 kg

◊ 3.200 mm : 440 kg

◊ 3.600 mm : 490 kg

◊ 4.000 mm : 520 kg

16

aLuminium Three-way-Tipper

Thr

ee-w

ay

-Tip

pe

r

17













wiTh sTeeL subframe anD ganTry


subframe

¾ Steel subframe S355, 4 and 5 mm thick



system




safeTy


¾ Circuit breaker 1.600 watt and safety strut



finish

¾ Coated kit has total coating thickness of 120 µm:

shot-blasting + polyester top coat

¾ Untreated kit, optionally available with hot-dip

galvanized subframe

boDy



members





¾ Steel wire mesh gantry, 4 mm, removable and

hot-dip galvanized

¾ Rear door in aluminium, 2.8 mm thick, 450 mm








than galvanizing)

aLuminium Three-way-Tipper

Thr

ee-w

ay

-Tip

pe

r

19

X

X

X

2.600 mm

3,2T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm




3.600 mm 3,7T.

3.200 mm 4,3T.

5,2T.

weighT of KiT

◊ 2.800 mm : 424 kg

◊ 3.200 mm : 456 kg

◊ 3.600 mm : 505 kg

◊ 4.000 mm : 540 kg


20

sTeeL

Thr

ee-w

ay

-Tip

pe

r

21

Three-Way-Tipper










¾ Double-walled sideboards in steel S355, 2 mm thick, non-stop laser welded, 350 mm high, fold-down, removable

and interchangeable. Smooth steel profiles perfect for advertising.

¾ Aluminium sideboards 400 mm high are available optionally


subframe




system




safeTy





finish

¾ Total coating thickness 120 µm / 1.200 h salt spray

¾ Shot-blasting + anticorrosive coating + polyester

top coat applied separately on each component

¾ Seals between non seam-welded components

boDy

¾ Platform in steel profile HX500, 3 mm thick, with

reinforcements and tubular side members




¾ Rubber buffer stops on sideboard and rear door

hinges, shock-absorbing

¾ Steel bulkhead S355, welded, 2 mm thick, 450

mm high


hot-dip galvanized

¾ Rear door in steel S355, 2 mm thick, 450 mm








than galvanizing)

sTeeL

Thr

ee-w

ay

-Tip

pe

r

23

Three-Way-Tipper

X

X

X

2.600 mm

3,2T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm




3.600 mm 3,42T.

3.200 mm 4,07T.

4,95T.

weighT of KiT

◊ 2.800 mm : 598 kg

◊ 3.200 mm : 662 kg

◊ 3.600 mm : 746 kg

◊ 4.000 mm : 830 kg

24

sTeeL Three-way-Tipper

Thr

ee-w

ay

-Tip

pe

r

25







wiTh 90° siDeboarD LocKing





and interchangeable. Smooth steel profiles perfect for advertising.

¾ Sideboards open to 90° and 180° thanks to special hinges as well as mechanical locking to 90°


subframe




system




safeTy





finish


¾ Shot-blasting + anticorrosive coating + polyester

top coat applied separately on each component


boDy









mm high


hot-dip galvanized

¾ Rear door in steel S355, 2 mm thick, 450 mm








than galvanizing)

sTeeL Three-way-Tipper

Thr

ee-w

ay

-Tip

pe

r

27

X

X

X

2.600 mm

3,2T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm




3.600 mm 3,42T.

3.200 mm 4,07T.

4,95T.

weighT of KiT

◊ 2.800 mm : 598 kg

◊ 3.200 mm : 662 kg

◊ 3.600 mm : 746 kg

◊ 4.000 mm : 830 kg

wiTh 90° siDeboarD LocKing

28

aLuminium

re

ar T

ipp

er

29

ReaR TippeR



¾ Removable at any time, perfect to load up bulky goods

¾ Cover for electro pump unit

¾ Perfect protection for an optimal resistance to weathering

¾ Biodegradable oil available optionally

¾ Rear door in aluminium, 2.8 mm thick, 450 mm high

¾ Automatic opening when tipping with rear door oscillating at the top




30

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte

*according to our warranty terms30 *according to our warranty terms

subframe

¾ Aluminium subframe, 6 mm thick


¾ Tipping through telescopic cylinder, tilting angle

approx. 48°

¾ Electro pump unit, 7L oil tank, pressure: 180 bar


safeTy



¾ Safety strut

finish

¾ Coated kit has a total coating thickness of 120 µm

¾ Shot-blasting

¾ Polyester top coat sapplied separately on each

component

¾ Untreated kit

boDy



members

¾ Dumping shaft at tail with sealed-for-life

bearings












than galvanizing)

¾ Lashing points in platform available optionally

aLuminium

Thr

ee-w

ay

-Tip

pe

r

31

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

31

ReaR TippeR

LifTing capaciTy of TeLescopic cyLinDer

X

X

X

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,8T.

3.200 mm 4,6T.

5,4T.

weighT of KiT

◊ 2.800 mm : 330 kg

◊ 3.200 mm : 360 kg

◊ 3.600 mm : 390 kg

◊ 4.000 mm : 420 kg

32

aLuminium rear Tipper

re

ar T

ipp

er

33













34

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


subframe




approx. 48°



safeTy



¾ Safety strut

finish


¾ Shot-blasting


component

¾ Untreated kit, optionally available with hot-dip

galvanized subframe

boDy



members


bearings






hot-dip galvanized







than galvanizing)


aLuminium rear Tipper

Thr

ee-w

ay

-Tip

pe

r

35

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

35


X

X

X

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,7T.

3.200 mm 4,5T.

5,3T.

weighT of KiT

◊ 2.800 mm : 369 kg

◊ 3.200 mm : 400 kg

◊ 3.600 mm : 431 kg

◊ 4.000 mm : 462 kg


36

sTeeL

re

ar T

ipp

er

37

ReaR TippeR







¾ Rear door in steel S355, 2 mm thick, 450 mm high



and interchangeable.

¾ Smooth steel profiles perfect for advertising.

38

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


subframe




approx. 48°



safeTy



¾ Safety strut

finish


¾ Shot-blasting

¾ Anticorrosive coating + polyester top coat applied

separately on each component


boDy




bearings







mm high


hot-dip galvanized







than galvanizing)


sTeeL

Thr

ee-w

ay

-Tip

pe

r

39

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

39

ReaR TippeR


X

X

X

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



5,1T.

3.600 mm 3,5T.

3.200 mm 4,3T.

weighT of KiT

◊ 2.800 mm : 572 kg

◊ 3.200 mm : 628 kg

◊ 3.600 mm : 684 kg

◊ 4.000 mm : 740 kg

40

aLuminium

re

mo

Va

bLe

T i

pp

er

41

Removable TippeR




safeTy

¾ Gripper axis in steel with anti-theft device, 30 mm diameter, welded on steel profile and bolted on structure


¾ Double-winged opening



42

TexT


craDLe

¾ Z-shaped side members, 158 mm high, 8 mm thick

¾ Centre distance 850 or 1060

¾ Shackle height 920 mm

finish


¾ Shot-blasting


component

¾ Untreated kit

boDy


thick, with U-shaped reinforced side members,

every 350 mm




¾ Rubber buffer stops on sideboard hinges,

shock-absorbing



hot-dip galvanized


¾ Rear rolls in hot-dip galvanized steel


aLuminium

re

mo

Va

bLe

T i

pp

er

43

Removable TippeR

SafeTy

¾ Gripper axis in steel with anti-theft device, 30 mm diameter, welded on steel profile 120 x 60 mm


¾ Double-winged opening or oscillating at the top with manual operation


and interchangeable

¾ Smooth steel profiles perfect for advertising




re

mo

Va

bLe

T i

pp

er

43

Removable TippeR

Dimensions

◊ Inside width : 1.800 2.000 mm

◊ Outside width : 1.880 2.080 mm



weighT of KiT

◊ 3.200 mm : 288 kg

◊ 3.500 mm : 315 kg

44

sTeeL

re

mo

Va

bLe

T i

pp

er

45

Removable TippeR

SafeTy





and interchangeable





46

TexT


craDLe

¾ Side members in IPE 140

¾ Centre distance 850 or 1060

¾ Shackle height 920 mm

finish


¾ Shot-blasting




boDy






¾ Rubber buffer stops on sideboard hinges,

shock-absorbing


mm high


hot-dip galvanized


¾ Rear rolls in hot-dip galvanized steel


sTeeL

re

mo

Va

bLe

T i

pp

er

47

Removable TippeR

SafeTy





and interchangeable





re

mo

Va

bLe

T i

pp

er

47

Removable TippeR

Dimensions

◊ Inside width : 1.800 2.000 mm

◊ Outside width : 1.880 2.080 mm



weighT of KiT

◊ 3.200 mm : 510 kg

◊ 3.500 mm : 558 kg

48

aLuminium DropsiDe wiTh wooD pLaTform

payLoaD up To

4.000 Kg

Dr

op

siD

e

49

¾ Rear corner pillars in aluminium, with connecting system



¾ Structure height from subframe until platform: 225 mm

¾ Very compact dropside

¾ Light dropside with high payload and moreover robust

¾ Maximum payload of 4.000 kg (the actual vehicle load capacity is relevant) TÜV tested

according to DIN EN 12642 Code L

¾ Lashing points integrated in platform, retractable, hot-dip galvanized steel, approx. every

850 mm

¾ Load securing TÜV tested according to DIN EN 12640

anD anoDizeD siDeboarDs

50

TexT







than galvanizing)

finish


¾ Shot-blasting


component

¾ Untreated kit

boDy

¾ Aluminium side members, 4 mm thick

¾ Aluminium structure, 3 mm thick

¾ Aluminium cross members under platform, 60

mm thick

¾ Multilayer wood platform, 15 mm thick, threated

with phenolic resin, water-resistant, anti-skid

surface




¾ Anodized aluminium sideboards and rear door,

25 mm thick, 400 mm high, fold-down,


¾ Locking-grips integrated in sideboards



aLuminium DropsiDe wiTh wooD pLaTform

Dr

op

siD

e

51

DropsiDe

¾ texte

¾ texte

¾ texte

¾ texte

Dr

op

siD

e

51

LoaD securing Din en 12640

robusTness Din en 12642 coDe L

Dimensions

◊ Inside width : 1.820 1.920 2.020 2.120 2.220 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



weighT of KiT

◊ 3.300 mm : 220 kg

◊ 4.000 mm : 255 kg

◊ 4.600 mm : 285 kg

anD anoDizeD siDeboarDs

52

sTeeL DropsiDe wiTh wooD pLaTform

payLoaD up To

4.000 Kg

Dr

op

siD

e

53

¾ Rear corner pillars in steel, with connecting system and hot-dip galvanized



¾ Structure height from subframe until platform: 225 mm

¾ Very compact dropside

¾ Lashing points integrated in platform, retractable, hot-dip galvanized steel, approx. every

850 mm

¾ Load securing TÜV tested according to DIN EN 12640

¾ Maximum payload of 4.000 kg (the actual vehicle load capacity is relevant) TÜV tested

according to DIN EN 12642 Code L

¾ Robustness

anD anoDizeD aLuminium siDeboarDs

54

TexT


boDy

¾ Side members in steel S355, 3 mm thick

¾ Structure in steel S250D, 2 mm thick, galvanized

¾ Steel cross members under platform, 60 mm

thick, galvanized

¾ Multilayer wood platform, 15 mm thick, threated

with phenolic resin, water-resistant, anti-skid

surface



mm high


hot-dip galvanized

¾ Anodized aluminium sideboards and rear door,

25 mm thick, 400 mm high, fold-down,


¾ Locking-grips integrated in sideboards



sTeeL DropsiDe wiTh wooD pLaTform






than galvanizing)

finish


¾ Shot-blasting




Dr

op

siD

e

55

DropsiDe

¾ texte

¾ texte

¾ texte

¾ texte

Dr

op

siD

e

55

LoaD securing Din en 12640

robusTness Din en 12642 coDe L

Dimensions

◊ Inside width : 1.820 1.920 2.020 2.120 2.220 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



weighT of KiT

◊ 3.300 mm : 300 kg

◊ 4.000 mm : 340 kg

◊ 4.600 mm : 380 kg

anD anoDizeD aLuminium siDeboarDs

56

aLuminium

Dr

op

siD

e

57

DropsiDe

moDuLariTy

¾ On customer request, dropside can be equipped with same options than for tipper






LighTness anD robusTness

¾ High payload and dropside entirely welded

58

TexT







than galvanizing)


finish


¾ Shot-blasting


component

¾ Untreated kit

boDy



members


¾ Locking-grips integrated in sideboards and rear

door, available with double safety system





hot-dip galvanized, available optionally with

aluminium plank gantry

¾ Rear door in massive aluminium profile with rib-

bed reinforcements, 2.8 mm thick, 350 mm high,

fold-down, removable and interchangeable

aLuminium

Dr

op

siD

e

59

DropsiDe

¾ texte

¾ texte

¾ texte

¾ texte

Dr

op

siD

e

59

DropsiDe

weighT of KiT

◊ 3.300 mm : 222 kg

◊ 4.000 mm : 260 kg

◊ 4.600 mm : 293 kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm


◊ Outisde length : from 2.160 to 4.560 mm

60

sTeeL

Dr

op

siD

e

61

DropsiDe

moDuLariTy

¾ On customer request, dropside can be equipped with same options than for tipper





and interchangeable.

¾ Smooth steel profiles perfect for advertising.

robusTness

¾ Dropside entirely welded

62

TexT







than galvanizing)


finish


¾ Shot-blasting




boDy




¾ Locking-grips integrated in sideboards and rear

door, available with double safety system




mm high


hot-dip galvanized

¾ Double-walled rear door in steel S355, 2 mm

thick, non-stop laser welded, 350 mm high, fold-

down, removable and interchangeable

sTeeL

Dr

op

siD

e

63

DropsiDe

¾ texte

¾ texte

¾ texte

¾ texte

Dr

op

siD

e

63

DropsiDe

weighT of KiT

◊ 3.300 mm : 362 kg

◊ 4.000 mm : 425 kg

◊ 4.600 mm : 479 kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



64

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte

*according to our warranty terms64

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


Various

... arounD 100 opTions ...

fiT aT any Time on our enTire proDucT range

ThanKs To a common boLT sysTem

Thr

ee-w

ay

-Tip

pe

r

65

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

65

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

65

opTions

moDuLariTy& uTiLiTy

66

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TooLbox behinD DriVer’s cab

aLuminium or sTeeL TooLbox

¾ Aluminium 3 mm thick und steel 2 mm thick

¾ 2 doors with rubber seal and integrated locks

¾ Doorway 520 mm

¾ Gas pressure spring

¾ Load securing

¾ Fixation for shelves

¾ Including subframe extension, in aluminium or steel,

depending on toolbox model

opTionaL

¾ Wood-made shelves,

15 mm thick

¾ Tool basket on toolbox,

250 mm high, in alumini-

um or steel perfo. sheet

Further dimensions on request.

DIMENSIONS (in mm) Width 600

WEIGHT (in kg) Number of shelves

Height Depth Aluminium Steel

800 1800 60 120 1

800 2000 70 130 1

1300 1800 90 170 2

1300 2000 95 190 2

1500 2000 105 210 3

Thr

ee-w

ay

-Tip

pe

r

67

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

67

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

67

or on pLaTform

TooLbox wiTh feeT

¾ Toolbox 800 mm high plus feet

¾ Feet welded to toolbox, bolted on platform

¾ Lateral door opening above sideboards

¾ Further technical data see toolbox page 64

TooLbox on pLaTform

¾ Access from above

¾ Hinged breech blocks to open and close

¾ Possibility of anti-theft system thanks to padlock

¾ Further technical data see toolbox page 64


WEIGHT (in kg)


800 1980 70 130


WEIGHT (in kg)


500/600 1980 50 95

68

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


sTorage box unDer frame

pLasTic sTorage box

¾ Supplied with fixing support

¾ Lockable

sTeeL sTorage box

¾ Supplied with fixing support

¾ Lockable

DIMENSIONS (in mm) WEIGHT (in kg)Length Height Depth

520 400 350 17

720 400 350 21

Thr

ee-w

ay

-Tip

pe

r

69

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

69

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

69

uniVersaL rear Door anD accessories

uniVersaL rear Door = auTomaTic opening when osciLLaTing aT The Top

+ DoubLe-wingeD Door

¾ Aluminium 2.8 mm thick and steel 2 mm thick

¾ 450 mm high

¾ Reinforced hinges

¾ Interchangeable with std. rear door at any time

wicKeT in sTeeL rear Door

¾ Dimensions 300 x 300 mm

¾ Lockable

¾ Possibility to block wicket in opened position

¾ Adaptable on steel standard and universal rear

door

Steel profile

Aluminium profileWEIGHT (in kg)

Aluminium Steel

34 47

70

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


rear unDerrun proTecTion

Towing baLL

¾ 13-pin plug

¾ Adapter on request

weighT

¾ Entire system: 45 kg

LighT proTecTion (opTionaL)

¾ Different models available depending on vehicle

manufacturer

TriVa

¾ Certified under directive 70/221/EC

¾ Gross vehicle weight rear underrun protection: ≤ 8t.

¾ Gross weight hitch block (vehicle + trailer): ≤ 11,5t.

LighT bracKeT

¾ Set back and high-mounted light brackets

¾ Lights are protected during tipping

aVaiLabLe for VehicLes wiTh a gross weighT up To 5,5T.

Thr

ee-w

ay

-Tip

pe

r

71

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

71

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

71

wiTh Towing DeVice

pin coupLing anD Towing baLL

¾ Pin coupling: 2 models available

¾ 13-pin plug

¾ Adapter on request

weighT enTire sysTem

¾ Depending on pin coupling: 55-60 kg

LighT proTecTion (opTionaL)

DuaL TriVa

¾ Certified under directive 70/221/EC

¾ Gross vehicle weight rear underrun protection: ≤ 8t.

¾ Gross weight hitch block (vehicle + trailer): ≤ 11,5t.

LighT bracKeT

¾ Set back and high-mounted light brackets

¾ Lights are protected during tipping

compacT

aVaiLabLe for VehicLes wiTh a gross weighT up To 7,5T.

72

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


siDeboarD exTensions

siDeboarD exTensions wiTh sTraighT siDes

¾ Height 450 or 900 mm

¾ Aluminium perforated sheet

¾ Steel perforated sheet

¾ Aluminium metal sheet

rear Door exTension osciLLaTing aT The Top





DoubLe-wingeD rear Door exTension (onLy wiTh uniVersaL rear Door)





Thr

ee-w

ay

-Tip

pe

r

73

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

73

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

73

...

siDeboarD exTensions wiTh canTeD siDes





siDeboarD exTensions foLDabLe 1/3 - 2/3 aT 300 mm

¾ Height 900 mm




WEIGHT

Pair sideboard ext. with canted sides Pair straight

sideboard ext.

Pair 1/3-2/3 foldable

sideboard ext.Height 900 Height 450

Steel perfo. sheet 24 kg/m 13 kg/m Weight canted sides

+ 15 kg

Weight canted sides

+ 20 kgAlu perfo. sheet 13 kg/m 7 kg/m

Alu metal sheet 20 kg/m 10 kg/m

Rear door ext. Alu metal sheet

25 kg 15 kg

74

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


ganTry

sTanDarD aLuminium ganTry

¾ Aluminium planks

¾ Standard equipment by aluminium bodies

¾ TÜV-certified lashing points available optionally

¾ Weight: approx. 21.5 kg at 900 mm height

perforaTeD sheeT ganTry

¾ Available in perforated steel or aluminium sheet

¾ Weight aluminium: approx. 23 kg at 900 mm height

sTanDarD sTeeL ganTry

¾ Wire mesh 4 mm and hot-dip galvanized

¾ Standard equipment by steel bodies

¾ TÜV-certified lashing points available optionally

¾ Weight: approx. 28 kg at 900 mm height

Thr

ee-w

ay

-Tip

pe

r

75

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

75

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

75

...

aLuminium meTaL sheeT ganTry (3 mm ThicK)

¾ Weight: approx. 22.5 kg at 900 mm height

aLuminium meTaL sheeT (3 mm ThicK)

¾ Kit for standard steel wire mesh gantry

reinforceD sTanDarD ganTry

¾ Additional bar perfect for transport of ladders

and tubes, max. load 300 kg

¾ Steel 36 kg and alu 26.5 kg at 900 mm height

cab proTecTion on ganTry

¾ Steel profile 2 mm thick

¾ Width 480 mm

76

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


LaDDer hoLDer anD pLasTic proTecTion

bacKwarD LaDDer hoLDer

¾ Steel

¾ Removable and height adjustable thanks to a

common bolt system

¾ Max. load 300 kg

¾ Weight approx. 22 kg

pLasTic proTecTion

¾ Adhesive PVC rubber protection for sideboard, rear

door, gantry and backward ladder holder profiles

bacKwarD LaDDer hoLDer wiTh roLLs

¾ Steel

¾ Rolls on entire length

¾ Removable and height adjustable thanks to a common bolt system

¾ Max. load 300 kg

Thr

ee-w

ay

-Tip

pe

r

77

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

77

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

77

TooL hoLDer

TooL hoLDer 1 TooL

¾ Steel galvanized

TooL hoLDer 3 TooLs

¾ Steel galvanized

¾ Available only on steel gantry

TooL hoLDer 11 TooLs

¾ Steel galvanized

¾ Black top coat

Number of tools WEIGHT (in kg)

1 2

3 5

11 15

78

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TarpauLins anD

TarpauLin anD bow

¾ Steep aluminium bow: connecting system

¾ Tarpaulin surface weight 680g/m²

¾ Tarpaulin standard in grey, other colours available optionally

¾ Tensioning rope for fixation on sideboards (see page 77)

¾ Dimensions and weight on request

TarpauLin on siDeboarD exTensions


¾ Tarpaulin grey, other colours available optionally

¾ Tensioning rope for fixation on sideboard extensions (see

page 77)

TarpauLin on siDeboarDs


¾ Tarpaulin standard in grey, other colours available optionally

¾ Tensioning rope for fixation on sideboards (see page 77)

Thr

ee-w

ay

-Tip

pe

r

79

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

79

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

79

LoaD neTs

LoaD neT

¾ Extensible

¾ Net in synthetic fibre and polypropylene, tear-resistant

¾ Stitches 30 mm thick, cord diameter 3 mm

¾ Border reinforced with cord

fasTening eyes anD hooKs for TarpauLin anD LoaD neT

¾ Supplied as standard equipment

Fastening hooks for aluminium sideboards:

simple clip system

Fastening eyes for steel sideboards and all types of sideboard extensions:must be fixed

80

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


Tipper anD DropsiDe

foLDing fooTsTep

¾ Weight 2 kg

hanDgrip

¾ Weight 1 kg

3-sTep LaDDer

¾ Available only for rear tipper, weight 6 kg

¾ Slip system under platform

sTirrup To boLT

Thr

ee-w

ay

-Tip

pe

r

81

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

81

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

81

access

foLDabLe LoaDing ramps

¾ Aluminium loading ramps

¾ Load capacity by pairs of 450 kg for vehicles with

wheelbase 1.500 mm

¾ Length 3.000 mm, Width 300 mm

¾ Storage possibility in toolbox or under subframe

LoaDing ramps

¾ Aluminium loading ramps

¾ Load capacity by pairs of 800 kg or 2.000 kg for

vehicles with wheelbase 1.500 mm

¾ Length 3.000 mm, Width 300 mm

¾ Storage possibility under tipper platform (only

available for rear tipper)

82

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TaiL LifT

aLuminium TaiL LifT (aDapTabLe on Tippers anD DropsiDes)

¾ Lifting capacity 650 kg

¾ Loading height 800 mm

¾ Anti-skid surface

¾ Steep for optimal access

¾ Unloading simplified

¾ Electric unit

¾ Remote control with up-/down button

¾ Manual unlocking to activate tail lift function

¾ Manual opening when dumping

¾ Anti-dumping safety system

Thr

ee-w

ay

-Tip

pe

r

83

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

83

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

83

signaLisaTion

siDe marKer Lamps

¾ Mandatory for vehicles

≥ 6.000 mm length

oVeraLL size Lamps

¾ Mandatory for vehicles

≥ 2.100 mm width

warning sTripes

¾ Class 1

¾ Class 2

reVoLVing LighT

¾ Incl. fixing bracket

¾ Orange halogen light

¾ 149 mm high

¾ 140 mm diameter

warning TriangLe (DoubLe-siDeD)

¾ To paste, LED lights 74 mm

¾ Manual lifting

¾ On/off-button

2 reVoLVing beacon LighTs wiTh fixing bar

¾ Metal fixation 1.2 Metre

¾ To paste

¾ On/off-button

2 reVoLVing beacon LighTs wiTh fixing bar anD

warning TriangLe

¾ Metal fixation 1.2 Metre

¾ To paste

¾ Warning triangle double-

sided

¾ LED lights 74 mm

¾ On/off-button in driver‘s cab

¾ Automatic or manual lifting

84

TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


TexT

Body

¾ texte

SuBframe

¾ texte

SafeTy

¾ texte

finiSh

¾ texte


aDDiTionaL opTions

reinforcemenTs for boDy sTrucTure

¾ Reinforcement of steel platform: 4 mm

¾ Reinforcement of platform for crane installations on platform

¾ Subframe extension for crane installations between driver‘s cab and body

LoaD securing: Lashing poinTs in pLaTform

¾ TÜV-tested according to DIN EN 12640

safeTy: Tipper LocKing

¾ Anti-dumping safety system

¾ Available for tippers with crane on platform or tail lift

Thr

ee-w

ay

-Tip

pe

r

85

Three-Way-Tipper

X

X

X

4,95T.

3.200 mm 4,07T.

2.600 mm

3,2T.

2.800 mm

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



3.600 mm 3,42T.


re

ar T

ipp

er

85

ReaR TippeR

weighT of KiT

◊ 2.800 mm : kg

◊ 3.200 mm : kg

◊ 3.600 mm : kg

◊ 4.000 mm : kg


X

X

X

5,10T.

3.200 mm 4,25T.

3.600 mm T.

2.600 mm

3T.

2.800 mm

Dimensions

◊ Inside width : 1.800 1.900 2.000 2.100 2.200 mm

◊ Outside width : 1.880 1.980 2.080 2.180 2.280 mm



op

Tio

ns

85

aVaiLabLe on reQuesT

power TaKe-off

¾ Tipper standard equipped with electro pump unit

¾ Power take-off available optionally (detailed information on request)

finish: Tipper anD DropsiDe coLours

¾ All bodies are serially delivered in white or metal grey

¾ Excepted aluminium dropsides with wood platform that are serially delivered in metal or

dark grey and steel dropsides with wood platform that are serially delivered in dark grey

¾ ALL RAL AND VEHICLE MANUFCTURER COLOURS AVAILABLE OPTIONALLY

(excepted metallized colours)

remoTe conTroL wiThouT cabLe

emergency wheeL bracKeT on subframe

86

moDuLariTy

your sTanDarD boDy + opTions

=

a cusTom-maDe Tipper or DropsiDe

The whoLe year rounD

Cu

sto

m-

ma

de

87

cusTom-maDe

LanDscaper

Loading ramps High loading platform

Double-winged rear door Load net

88

...

Tool holder Foldable sideboard extensions 2/3 - 1/3

Toolbox

Alu metal sheet

gantry

double-winged

rear door

extension

Storage box

Set back and high-mounted light brackets

Rear underrun protection with

dual towing device

89 cu

sTo

m-

ma

De

ciViL engineering

Toolbox on feet

Toolbox + 3-step ladder Backward ladder holder

90

anD buiLDers

cu

sTo

m-

ma

De

Cab protection

Toolbox

Plastic protection

Storage box


dual towing device

Crane

Steel tipper

Double-winged

rear door

91

carpenTer

Folding footstep

Integrated and retractable

lashing points

92

...

cu

sTo

m-

ma

De

Crane

Storage box


dual towing device

Reinforced

gantry

Backward ladder holder

height adjustable

Aluminium

dropside

93

TransporT

94

Integrated and retractable

lashing points

...

cu

sTo

m-

ma

De

95

Storage box


dual towing device

Tail lift

Aluminium bow

and tarpaulin

pubLic serVices

96


dual towing device

Double-winged

rear door

Double-winged

rear door extension

Light protection

Perforated sheet

sideboard extensions

Plastic

protection

...

97 cu

sTo

m-

ma

De

... seVeraL aDDiTionaL configuraTions ...

LeT your inDiViDuaL anD inDusTriaL neeDs

wanDer

98

imprinT

Product catalogue © 2014

All copy rights regarding this technical documentation and all drawings submitted to the receiver in person remain at all

times with SAS JPM, Naucelle, France. Documentations and drawings must not be copied or reproduced without prior

written authorization. They are not binding and may be subjected to changes. All products have to be checked for suita-

bility by the client. Weights are guidance values and in no case binding. The relevant prices are to be requested at the

manufacturer.

Headquarters France:

ZA de Merlin - RN 88

12800 Naucelle

Tel: +33 (0)5 65 69 24 70

Fax: +33 (0)5 65 69 23 77

E-mail: [email protected]

Website: www.bennes-jpm.com

Documents

Product catalogue JPM