Upload
sulithkuriakose
View
218
Download
0
Embed Size (px)
Citation preview
7/31/2019 Problem Presentation
1/28
7/31/2019 Problem Presentation
2/28
SYNOPSIS
GUIDED BY,
Prof. K.O. Rosy
HOD Dept. of Community Health Nursing
NUINS.CON
PRESENTED BY,
Mr. Sujith Kuriakose1ST Year M.Sc. Nursing
NUINS.CON
7/31/2019 Problem Presentation
3/28
NITTE UNIVERISTY (DECLARED AS DEEMED-TO-BE UNIVERISTY
UNDER SECTION 3 OF UGC ACT, 1956), KARNATAKA, MANGALORE.ANNEXURE II
1 Name of the candidate and address MR. SUJITH KURIAKOSE
1ST YEAR M.Sc. NURSING
NITTE USHA INSTITUTE OF
NURSING SCIENCES,
DERALAKATTE, MANGALORE
2 Name of the institution NITTE USHA INSTITUTE OFNURSING SCIENCES, COLLEGE OF
NURSING, PANEER, DERALAKATTE,
MANGALORE 574 160
KARNATAKA, INDIA
3 Course of the study and subject 1ST YEAR M.Sc. NURSING,
COMMUNITY HEALTH NURSING
4 Date of admission 01-06-09
5 Title of the topic
ASSESSING KNOWLEDGE AND ATTITUDE OF EMPLOYEES REGARDING OCCUPATIONAL
HAZARDS AND SAFETY MEASURE PRACTICES.
PERFORMA FOR REGISTRATION OF SUBJECTS FOR DISSERTATION
7/31/2019 Problem Presentation
4/28
BRIEF RESUME OF THE INTENDED STUDY INTRODUCTION
Industries and factories are now the commonplaces of accidents or occupational illness. Both theemployer and employees should be aware of the
common occupational health hazards andpreventive measures.1 The diseases arising out ofoccupations receive less attention because they arecomparatively late after the exposure. All those
exposed do not get the disease but very few andthe preventive measures are not much appreciatedby the employees or employers as they do not get
the benefits immediately2
.
7/31/2019 Problem Presentation
5/28
The common occupational hazards are
pneumoconiosis, accidents, injuries, ill effects of
heat, cold, noise, and vibrations and above all the
excessive dust particles produced and present in
the atmosphere3.
The rate of injury is high in the steelworks.
Characteristics of the work areas such as furnaces,welding sites, steel melting and moulding lines,
mixing of chemicals, working with machineries,
handling hot steel objects etc. Prevention of eyeinjury needs special attention in steelworks as there
are chances of eye injury due to welding and
melting of steel
1
.
7/31/2019 Problem Presentation
6/28
6.1 NEED FOR THE STUDY
India, in the recent years has faced emergence
many occupational hazards. Agriculture is the main
occupation in India. There are many agencies like
National Institute of Occupational Health, Industrial
Toxicology Research Centre, Central Labour
Institute, etc. are working on researchable issueslike Asbestos and asbestos related diseases,
Pesticide poisoning, Silica related diseases and
Musculoskeletal disorders. Still much more is to bedone for improving the occupational health
research.
7/31/2019 Problem Presentation
7/28
In USA in 2006 5,840 work related fatalities occurred.
Workplace homicides have declined 50 percent since 1994.
Struck by object fatalities overtook homicides as the third
most frequent fatal event in 2004. Men continued to recorda disproportionate share of fatalities relative to their
employment in 2006 (92%).4
According to data from the National Institute for
Occupational Safety and Health, an average of 15 workers
die from traumatic injuries each day in the United States,
and an additional 200 workers are hospitalized. Common
causes of industrial injury are poor ergonomics, misuse or
failure of equipment, exposure to general hazards,
inadequate safety training and clothing,jewellery or
long hair that becomes tangled in machinery.6
http://en.wikipedia.org/wiki/National_Institute_for_Occupational_Safety_and_Healthhttp://en.wikipedia.org/wiki/National_Institute_for_Occupational_Safety_and_Healthhttp://en.wikipedia.org/wiki/Ergonomicshttp://en.wikipedia.org/wiki/Clothinghttp://en.wikipedia.org/wiki/Jewelleryhttp://en.wikipedia.org/wiki/Hairhttp://en.wikipedia.org/wiki/Hairhttp://en.wikipedia.org/wiki/Jewelleryhttp://en.wikipedia.org/wiki/Clothinghttp://en.wikipedia.org/wiki/Ergonomicshttp://en.wikipedia.org/wiki/National_Institute_for_Occupational_Safety_and_Healthhttp://en.wikipedia.org/wiki/National_Institute_for_Occupational_Safety_and_Health7/31/2019 Problem Presentation
8/28
The magnitude of the problem is on a hike. There
arent many studies conducted in India on
occupational hazards and data regarding this is
unavailable. And also while the investigator had
been working as an assistant lecturer in Mangalore
had many opportunities to visit some of the steel
industries and learnt that the occupationalconditions are poor. Hence the investigator felt that
there is a need to assess the common occupational
hazards faced by the employees and also to assessthe safety measures adopted by them.
7/31/2019 Problem Presentation
9/28
REVIEW OF LITERATURE
1. A cross-sectional population based studyconducted in six industries of Mysore, Karnatakain 2008 found that in many industrial settings, thenoise levels are such that they are potentialhealth hazards. The study results showed that theindustrial workers are repeatedly being exposedto noise. It is found that symptoms such as 'eyeball pressure,' 'awakening from sleep,' 'pains inneck,' 'frequent ear vibration,' 'chronic fatigue,'
'repeated headache,' 'backache,' and 'repeatedear pulsation' common among the workers thosewho are exposed to the noise.
7/31/2019 Problem Presentation
10/28
2. A population based study in 2006 in
Delhi, India on health hazards of silver
cottage industry in developing countries
reveals that in silver industries and other
industries making metal products emit
neurotoxic and nephrotoxic particles. The
employees are not aware of the hazards
those can occur and there are no nationalpolicies to prevent exposure to such
chemicals.
7/31/2019 Problem Presentation
11/28
A cross-sectional study was conducted on relationships of
job hazards, lack of knowledge, alcohol use, health status
and risk taking behaviour to work injury of industrial
workers in, Kharagpur, India in 2008. It was found that the
main risk factors of occupational hazards are Handling
material, poor environmental/working conditions, and
geological/strata control- related hazards. Prevention
should focus on handling material, poor environmental
condition, especially addressing workers with no formal
education, alcohol consumption, disease, big family size,and risk-taking behaviour.9
7/31/2019 Problem Presentation
12/28
4. A study of six communities in Canada found
that one in three cases of adult onset asthma
may be due to occupational exposure.Researchers performed a population based
cross-sectional study involving more than
18,000 people, 20 44 years. They interviewed2,974 participants in person about symptoms of
and risk factors of asthma, including information
regarding occupational history, work related
symptoms and exposure to specific materials
known to induce Asthma. Of the 2,974, a small
subset (n=166) had onset of Asthma. This is
about 36.1% of incidence.
7/31/2019 Problem Presentation
13/28
5. A longitudinal population study was
conducted on mortality among sheet
metal workers between 1986 and 2004
in Canada. Statistically significant
excess mortality was observed forpleural cancers, mesothelioma, and
asbestosis. Both lung cancer and COPD
increased consistently. There was anincreased prevalence of lung cancer
among the workers those who smoke.
7/31/2019 Problem Presentation
14/28
STATEMENT OF THE PROBLEM
A study on knowledge, attitude and practice ofemployees regarding occupational hazards and
safety measure practices in a selected steel industry
in Mangalore.
7/31/2019 Problem Presentation
15/28
OBJECTIVES OF THE STUDY
1. To identify the knowledge and attitude of
employees regarding the occupationalhazards.
2. To assess knowledge and practice of
employees regarding various safety measuresagainst the occupational hazards.
3. To find the relationship between the
knowledge level and practice with selecteddemographic variables
7/31/2019 Problem Presentation
16/28
6.5 OPERATIONAL DEFINITIONS
1. Industry
In this study industry refers to a factory where there
are approximately 300 workers and electric power isused. The factory produces steel products such as
drums and leafs for vehicles.
2. Employees
In these study employees refers to permanent workersof the industry and who are between the age group 25
65 years of age and working shifts.
3. Knowledge
In this study knowledge refers to the awareness of the
employees regarding various occupational health
hazards of the industry as measured against structured
questionnaire.
i d
7/31/2019 Problem Presentation
17/28
4. Attitude
In this study attitude means the feelings of
employees regarding the need for safety
measures as measured with a rating scale.5. Occupational Hazard
Anything, including work practices or
procedures that have the potential to harm thehealth and safety of a person.
6. Safety measures
In this study safety measures refers to themedical, nursing, environmental and
engineering measures and the protective
devices those will protect the workers from
occupational hazards.
7/31/2019 Problem Presentation
18/28
6.6 DELIMITATIONSThe study is limited to:
- Employees of selected steel industry
- Bottom level employees- Who are able to follow the instructions
- Available during data collection
- Willing to participate in the study
7/31/2019 Problem Presentation
19/28
6.7ASSUMPTIONThe study assumes that
1. The employees have only basic
knowledge regarding the occupationalhealth hazards of the industry.
2. The employees have a positive attitude
regarding the safety practices
7/31/2019 Problem Presentation
20/28
6.8HYPOTHESIS
H1: There will be a significant relationship
between knowledge of occupational
hazards and occupational safety practices.
H2: There will be a significant relationship
between knowledge of occupational
hazards and selected demographicvariables.
7/31/2019 Problem Presentation
21/28
7.MATERIALS AND METHOD
7.1.1 Source of data
Employees of selected steel industry where steel productssuch as drums and leafs for vehicles are produced.
7.1.2 Research design
In this study the research design is descriptive survey method7.1.3 Setting
Selected steel industry in Mangalore taluk which produces
steel products such as drums and leafs for vehicles.
7.1.4 PopulationEmployees of selected steel industry where steel products
such as drums and leafs for vehicles are produced.
7/31/2019 Problem Presentation
22/28
7.2 METHOD OF DATA COLLECTION
7.2.1 Sampling procedure
Purposive sampling technique to select industry and
random sampling technique to select subjects 7.2.2 Sampling size
A random sample of 250 employees will be selectedfor the study
7.2.3 Inclusion criteria for sampling 1. Who are employees of steel selected industry
2. Who are in the age group between 25 65 years
3. Who are able to follow instructions
4. Who can understand Kannada, Tulu and English 5. Who are permanent employees
6. Who are present at the time of data collection
7/31/2019 Problem Presentation
23/28
7.2.4 Exclusion criteria
1. Who are not willing to participate in the study2. Who are sick and absent
3. Who are having psychiatric problems
4. Who cannot spare time during the data collection
7.2.5 Instrument used
1. Demographical data
2. Knowledge questionnaire against which knowledge
can be assessed.3. Rating scale to assess the attitude
7/31/2019 Problem Presentation
24/28
7.2. 6 Data Collection Method
Investigator will obtain written permission from the
head of the industry prior to data collection period.
Purpose of the study will be explained to the subjectsand informed consent will be taken. There after data
will be collected using survey method.
7.2.7 Data analysis plan
Data will be analyzed by using Descriptive andinferential statistics.
Description of sample characteristics.
Description of knowledge regarding occupational
health hazards and safety measure practices in terms of
frequency and percentage.
Chi square of attitude regarding various safety measure
practices with the help of rating scales.
7/31/2019 Problem Presentation
25/28
7.3 Does the study require any investigation or
intervention to be conducted on patients or other
humans or animals? If so describe briefly.
This study does not require any interventions to be
conducted on the subjects. However, informedconsent will be obtained from respondents prior to
data collection.
7.4. Has the ethical clearance obtained?Ethical clearance will be obtained.
7/31/2019 Problem Presentation
26/28
BIBLIOGRAPHIC REFERENCES
1. International Labour Office. (2005). Safety and health in the iron and
steel industry. Retrieved August 3, 2009 from
http://books.google.co.in/books.
2. Baride J.P. and Kulkarni AP. Text book of community medicine. 3rd
edition. Mumbai: Vora Medical Publishers; 2006.
3. Park. K. Text book of Preventive and Social Medicine. 19th edition.
Jabalpur (India): M/s Banarsidas Bhanot publishers; 2007.4. U.S. Bureau of Labor Statistics, U.S. Department of Labor. ( 2008).
Injury/Illness Incidence Rates. Retrieved August 3, 2009 from
http://www.bls.gov/iif/oshwc/cfoi/cfch0005.
5. Schoemaker MJ, Barreto SM, Swerdlow AJ, Higgins CD, Carpenter RG.(2003). Non fatal work related injuries in a cohort of Brazilian
steelworks. Retrieved July 10, 2009 from
http://www.ncbi.nlm.nih.gov/sites/entrez.
http://books.google.co.in/bookshttp://www.osha.gov/oshstats/work.htmlhttp://www.bls.gov/iif/oshwc/cfoi/cfch0005.http://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Schoemaker%20MJ%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Barreto%20SM%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Swerdlow%20AJ%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Higgins%20CD%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Carpenter%20RG%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Carpenter%20RG%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Higgins%20CD%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Swerdlow%20AJ%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Barreto%20SM%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Schoemaker%20MJ%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.bls.gov/iif/oshwc/cfoi/cfch0005.http://www.osha.gov/oshstats/work.htmlhttp://books.google.co.in/books7/31/2019 Problem Presentation
27/28
6. Wikipedia. (2009). Industrial injury. Retrieved July 20, 2009 from
http://en.wikipedia.org/wiki/industrial injury.
Mahendra Prashanth KV, Sridhar V. (2008).
7. The relationship between noise frequency components and physical, physiologicaland psychological effects of industrial workers. Retrieved July 12, 2009 from
http://www.ncbi.nlm.nih.gov/sites/entrez
Sethi PK, Khandelwal D. (2006).
8. Cadmium exposure: health hazards of silver cottage industry in developing
countries. Retrieved July 8, 2009 from http://www.ncbi.nlm.nih.gov/sites/entrez.Kunar BM, Bhattacherjee A, Chau N. (2008).
9. Relationships of job hazards, lack of knowledge, alcohol use, health status and risk
taking behaviour to work injury of coal miners: a case control study in India. Retrieved
July 12, 2009 from http://www.ncbi.nlm.nih.gov/sites/entrez.
10. Johnson AR. One third of Asthma cases may be occupationally related. AJN. 2001
April;101 (4): 18
Dement J, Welch L, Haile E, Myers D. (2009).
11.Mortality among sheet metal workers participating in a medical screening program.
Retrieved July 8, 2009 from http://www.ncbi.nlm.nih.gov/pubmed/19562730
http://en.wikipedia.org/wiki/industrialhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Mahendra%20Prashanth%20KV%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Sridhar%20V%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Sethi%20PK%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Khandelwal%20D%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Kunar%20BM%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Bhattacherjee%20A%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Chau%20N%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Dement%20J%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Welch%20L%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Haile%20E%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Myers%20D%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/pubmed/19562730?ordinalpos=1&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DefaultReportPanel.Pubmed_RVDocSumhttp://www.ncbi.nlm.nih.gov/pubmed/19562730?ordinalpos=1&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DefaultReportPanel.Pubmed_RVDocSumhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Myers%20D%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Haile%20E%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Welch%20L%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Dement%20J%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Chau%20N%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Bhattacherjee%20A%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Kunar%20BM%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Khandelwal%20D%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Sethi%20PK%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrezhttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Sridhar%20V%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://www.ncbi.nlm.nih.gov/sites/entrez?Db=pubmed&Cmd=Search&Term=%22Mahendra%20Prashanth%20KV%22%5BAuthor%5D&itool=EntrezSystem2.PEntrez.Pubmed.Pubmed_ResultsPanel.Pubmed_DiscoveryPanel.Pubmed_RVAbstractPlushttp://en.wikipedia.org/wiki/industrial7/31/2019 Problem Presentation
28/28