PRICE LIST - Kaldaz Price...Model No. of Fans / Diameter Watts 6K/1K @ -4 CSST R404a List Price excluding GST ENC 400 1 x 105mm 363 / 61 $518.00 ENC 490 1 x 105mm 444 / 74 $552.00

PRICE LISTEffective 1st September 2017

PAGE 2

PAGE 3

PAGE 4

PAGE 5

PAGE 6

PAGE 7

PAGE 8

PAGE 9

EDEN DEPC 250mm LOW AIR DUAL BLOW EVAPORATORS PAGE 10

PAGE 11

PAGE 12

PAGE 13

PAGE 14-15

PAGE 16-17

Authorized Australian distributors of EDEN high efficiency refrigeration equipment

INDEX

EDEN UPM 250mm ULTRA LOW PROFILE EVAPORATORS

EDEN ENC CABINET SERIES EVAPORATORS

INDEX

EDEN FEM 300mm LOW PROFILE EVAPORATORS

EDEN ESN 400mm MEDIUM PROFILE EVAPORATORS

EDEN FNR 500mm HIGH PROFILE EVAPORATORS

EDEN FNX 630mm HEAVY DUTY EVAPORATORS

EDEN ETLE 710mm BLAST FREEZER EVAPORATORS

EFGP MATRIX AIR COOLED CONDENSERS

EFGP SINGLE ROW JUMBO AIR COOLED CONDENSERS

ACCOUNT APPLICATION FORM

EFGP JUMBO AIR COOLED CONDENSERS

KALDAZ TERMS & CONDITIONS

Model No. of Fans / DiameterWatts 6K/1K @

-4°CSST R404a

List Price

excluding GST

ENC 400 1 x 105mm 363 / 61 $518.00

ENC 490 1 x 105mm 444 / 74 $552.00

ENC 770 2 x 105mm 698 / 116 $679.00

ENC 950 2 x 105mm 862 / 144 $719.00

ENC 1100 2 x 105mm 998 / 166 $763.00

ENC 1290 3 x 105mm 1170 / 195 $880.00

ENC 1400 3 x 105mm 1270 / 212 $930.00

ENC 1550 3 x 105mm 1406 / 234 $1,016.00

ENC 1830-EC 2 x 200mm (EC) 1661 / 277 $1,291.00

ENC 2140-EC 2 x 200mm (EC) 1942 / 324 $1,351.00

Model No. of fans / diameterWatts 6K/1K @

-24°CSST R404a

List Price

excluding GST

ELC 350 1 x 105mm 315 / 53 $600.00

ELC 570 2 x 105mm 513 / 86 $773.00

ELC 690 2 x 105mm 621 / 104 $845.00

ELC 850 2 x 105mm 765 / 128 $913.00

ELC 950 3 x 105mm 855 / 143 $1,091.00

ELC 1090 3 x 105mm 981 / 164 $1,185.00

ELC 1490-EC 2 x 200mm (EC) 1341 / 224 $1,478.00

ELC 1780-EC 2 x 200mm (EC) 1602 / 267 $1,538.00

EDEN ENC / ELC Series Cabinet Evaporators

FAN DIAMETER 105mm / 200mm

Price list effective 1st Sept 2017

ENC SERIES MEDIUM TEMP AIR DEFROST = 4.2mm / 6FPI

ELC SERIES LOW TEMP ELECTRIC DEFROST = 4.2mm / 6FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. Coils c/w Powder Coated Aluminium Casing4. Coils c/w Eden smart circuitry & high efficiency inner groove copper tubing5. EC Models c/w high efficiency EBM 2 speed EC low wattage fans6. Fitted with 2 wire high limit safety thermostat (low temp only)7. Easily removed defrost element for service (low temp only)

Model No. of Fans Air Throw (m)Kw 6K/1K @

-4°CSST R404a

List Price

excluding GST

UPM 0102 1 12.6 0.834 / 0.139 $1,078.00

UPM 0145 1 12.4 1.188 / 0.198 $1,153.00

UPM 0189 1 12.3 1.548 / 0.258 $1,223.00

UPM 0213 1 12.0 1.740 / 0.290 $1,303.00

UPM 0274 2 12.9 2.245 / 0.374 $1,486.00

UPM 0380 2 12.7 3.114 / 0.519 $1,627.00

UPM 0465 2 12.5 3.810 / 0.635 $1,767.00

UPM 0570 2 12.2 4.670 / 0.778 $1,898.00

UPM 0623 2 12.0 5.105 / 0.851 $2,044.00

UPM 0735 3 14.1 6.023 / 1.004 $2,175.00

UPM 0851 3 13.9 6.973 / 1.162 $2,353.00

UPM 0947 3 13.7 7.760 / 1.293 $2,531.00

UPM 1172 4 14.4 9.603 / 1.601 $2,920.00

UPM 1320 4 14.2 10.816 / 1.803 $3,155.00

UPM 1510 5 14.5 12.373 / 2.062 $3,755.00


-24°CSST R404a

List Price

excluding GST

UPL 0097 LT6 1 12.8 1.018 / 0.170 $1,359.00

UPL 0134 LT6 1 12.6 1.407 / 0.235 $1,457.00

UPL 0144 LT6 1 12.4 1.512 / 0.252 $1,556.00

UPL 0225 LT6 2 13.4 2.362 / 0.394 $1,782.00

UPL 0271 LT6 2 13.2 2.845 / 0.474 $1,957.00

UPL 0330 LT6 2 13.0 3.465 / 0.577 $2,300.00

UPL 0453 LT6 3 13.8 4.755 / 0.793 $2,829.00

UPL 0524 LT6 3 13.6 5.501 / 0.917 $3,073.00

UPL 0616 LT6 4 14.0 6.468 / 1.078 $3,481.00

UPL 0718 LT6 4 13.2 7.539 / 1.257 $3,772.00

UPL 0973 LT6 5 14.3 10.216 / 1.703 $4,144.00

EDEN UPM / UPL LT6 Series Evaporators

FAN DIAMETER 250mm


UPM SERIES MEDIUM TEMP AIR DEFROST = 4.2mm / 6FPI

UPL LT6 SERIES LOW TEMP ELECTRIC DEFROST = 4.2mm / 6FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. Dual staggered, copper and blue epoxy coated fin options available at extra cost4. Stainless steel casing available at extra cost5. Special circuitry for ultra low temp, brines, or liquid overfeed systems available6. CO2 applications for special orders 7. Hot gas bypass available


-4°CSST R404a

List Price

excluding GST

FEM 0235 1 11.5 1.925 / 0.321 $1,050.00

FEM 0303 1 11.3 2.482 / 0.414 $1,149.00

FEM 0397 1 11.2 3.251 / 0.542 $1,255.00

FEM 0452 1 11.0 3.702 / 0.617 $1,369.00

FEM 0492 1 10.8 4.030 / 0.672 $1,495.00

FEM 0590 2 12.0 4.832 / 0.805 $1,673.00

FEM 0700 2 11.8 5.733 / 0.956 $1,845.00

FEM 0790 2 11.5 6.470 / 1.078 $2,033.00

FEM 0873 2 11.3 7.150 / 1.192 $2,215.00

FEM 1095 3 13.3 8.968 / 1.495 $2,410.00

FEM 1290 3 13.1 10.565 / 1.761 $2,605.00

FEM 1350 3 12.9 11.057 / 1.843 $2,845.00

FEM 1408 4 13.7 11.531 / 1.922 $2,945.00

FEM 1510 4 13.6 12.367 / 2.061 $3,300.00

FEM 1670 4 13.4 13.677 / 2.279 $3,532.00


-24°CSST R404a

List Price

excluding GST

FEME 0145 LT6 1 11.5 1.516 / 0.253 $1,346.00

FEME 0196 LT6 1 11.5 2.049 / 0.342 $1,475.00

FEME 0262 LT6 1 11.3 2.739 / 0.457 $1,673.00

FEME 0317 LT6 2 12.0 3.315 / 0.552 $1,953.00

FEME 0378 LT6 2 12.0 3.953 / 0.659 $2,136.00

FEME 0413 LT6 2 11.8 4.319 / 0.720 $2,350.00

FEME 0500 LT6 3 12.5 5.229 / 0.871 $2,732.00

FEME 0604 LT6 3 12.5 6.316 / 1.053 $2,980.00

FEME 0672 LT6 4 13.6 7.027 / 1.171 $3,391.00

FEME 0821 LT6 4 13.5 8.585 / 1.431 $3,687.00

FEME 0910 LT6 4 13.5 9.516 / 1.586 $3,979.00

EDEN FEM / FEME LT6 Series Evaporators

FAN DIAMETER 300mm


FEM SERIES MEDIUM TEMP AIR DEFROST = 4.2mm / 6FPI

FEME LT6 SERIES LOW TEMP ELECTRIC DEFROST = 4.2mm / 6FPI



-4°CSST R404a

List Price

excluding GST

ESN 0345.401B 1 19.4 2.794 / 0.466 $1,800.00

ESN 0506.401B 1 19.2 4.099 / 0.683 $1,963.00

ESN 0641.401B 1 19.0 5.192 / 0.865 $2,160.00

ESN 0750.401B 1 18.8 6.075 / 1.012 $2,330.00

ESN 0839.401B 1 18.5 6.796 / 1.133 $2,488.00

ESN 0985.402B 2 19.7 7.978 / 1.329 $2,953.00

ESN 1243.402B 2 19.5 10.069 / 1.678 $3,205.00

ESN 1456.402B 2 19.2 11.794 / 1.966 $3,462.00

ESN 1705.402B 2 19.0 13.811 / 2.302 $3,719.00

ESN 1925.403B 3 20.2 15.592 / 2.599 $4,309.00

ESN 2328.403B 3 20.0 18.857 / 3.143 $4,747.00

ESN 2670.403B 3 19.7 21.626 / 3.604 $5,124.00

ESN 2850.404B 4 20.7 23.085 / 3.847 $5,852.00

ESN 3282.404B 4 20.5 26.584 / 4.431 $6,415.00

ESN 3670.404B 4 20.3 29.726 / 4.954 $7,071.00

ESN 4144.405B 5 21.3 33.566 / 5.594 $7,891.00

ESN 4520.405B 5 21.1 36.611 / 6.102 $8,570.00


-24°CSST R404a

List Price

excluding GST

ESL 0194.401B 1 19.2 2.007 / 0.334 $2,089.00

ESL 0241.401B 1 19.0 2.492 / 0.415 $2,248.00

ESL 0282.401B 1 18.8 2.916 / 0.486 $2,412.00

ESL 0320.401B 1 18.5 3.309 / 0.552 $2,554.00

ESL 0371.402B 2 19.7 3.837 / 0.639 $2,964.00

ESL 0473.402B 2 19.5 4.892 / 0.815 $3,254.00

ESL 0598.402B 2 19.2 6.185 / 1.031 $3,489.00

ESL 0731.402B 2 19.0 7.560 / 1.260 $3,730.00

ESL 0843.403B 3 20.2 8.719 / 1.453 $4,282.00

ESL 1010.403B 3 20.0 10.446 / 1.741 $4,621.00

ESL 1168.403B 3 19.7 12.080 / 2.013 $4,977.00

ESL 1296.404B 4 20.7 13.403 / 2.234 $5,802.00

ESL 1489.404B 4 20.5 15.400 / 2.567 $6,349.00

ESL 1624.404B 4 20.3 16.796 / 2.800 $6,918.00

ESL 1945.405B 5 21.3 20.115 / 3.353 $7,629.00

ESL 2177.405B 5 21.1 22.510 / 3.752 $8,345.00

EDEN ESN / ESL Medium Profile Series Evaporators

FAN DIAMETER 400mm


ESN SERIES MEDIUM TEMP AIR DEFROST = 4.2mm / 6FPI

ESL SERIES LOW TEMP ELECTRIC DEFROST = 6.35mm / 4FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. Coils c/w Eden smart circuitry4. Dual staggered, copper and blue epoxy coated fin options available at extra cost5. Stainless steel casing available at extra cost6. Special circuitry for ultra low temp, brines or liquid overfeed systems available7. Hot gas bypass available


-4°CSST R404a

List Price

excluding GST

FNR 1180 1 27.5 9.669 / 1.612 $3,428.00

FNR 1510 1 27.5 12.373 / 2.062 $3,758.00

FNR 1820 1 27.3 14.913 / 2.486 $4,260.00

FNR 2090 1 27.2 17.125 / 2.854 $4,601.00

FNR 2270 2 31.5 18.600 / 3.100 $5,151.00

FNR 2780 2 31.4 22.779 / 3.797 $5,748.00

FNR 3230 2 31.4 26.466 / 4.411 $6,258.00

FNR 3660 2 31.3 29.990 / 4.998 $6,853.00

FNR 3870 3 32.5 31.710 / 5.285 $8,134.00

FNR 4600 3 31.5 37.691 / 6.282 $8,938.00

FNR 4960 3 31.5 40.641 / 6.774 $9,855.00

FNR 5290 4 33.5 43.345 / 7.224 $10,620.00

FNR 7430 4 31.5 60.880 / 10.147 $12,288.00


-24°CSST R404a

List Price

excluding GST

FLT 0520 1 27.5 5.438 / 0.906 $3,550.00

FLT 0700 1 27.5 7.320 / 1.220 $3,885.00

FLT 0860 1 27.3 8.993 / 1.499 $4,386.00

FLT 0980 1 27.2 10.248 / 1.708 $4,727.00

FLT 1120 2 31.5 11.712 / 1.952 $5,721.00

FLT 1450 2 31.4 15.163 / 2.527 $6,192.00

FLT 1720 2 31.4 17.986 / 2.998 $6,900.00

FLT 1860 3 32.5 19.450 / 3.242 $8,215.00

FLT 2120 3 31.5 22.169 / 3.695 $9,253.00

FLT 2540 3 31.5 26.561 / 4.427 $9,970.00

FLT 2860 4 33.5 29.907 / 4.985 $11,610.00

FLT 3220 4 32.5 33.672 / 5.612 $12,595.00

EDEN FNR / FLT Series Evaporators

FAN DIAMETER 500mm


FNR SERIES MEDIUM TEMP AIR DEFROST = 4.2mm / 6FPI

FLT SERIES LOW TEMP ELECTRIC DEFROST = 6.35mm / 4FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty 2. Above pricing is F.O.B. Melbourne Metro3. Coils c/w Eden smart circuitry4. Dual staggered, copper and blue epoxy coated fin options available at extra cost5. Stainless steel casing available at extra cost6. Special circuitry for ultra low temp, brines or liquid overfeed systems available7. CO2 applications for special orders 8. Hot gas bypass available


-4°CSST R404a

List Price

excluding GST

FNX 2480 1 32 20.32 / 3.39 $7,854.00

FNX 2870 1 32 23.52 / 3.92 $8,401.00

FNX 3280 1 32 26.88 / 4.48 $9,109.00

FNX 4920 2 34 40.31 / 6.72 $11,877.00

FNX 6160 2 34 50.47 / 8.41 $12,947.00

FNX 7120 2 34 58.34 / 9.72 $14,145.00

FNX 8250 3 35 67.60 / 11.27 $16,245.00

FNX 9120 3 35 74.73 / 12.46 $17,723.00

FNX 9950 3 35 81.53 / 13.59 $18,621.00


-24°CSST R404a

List Price

excluding GST

FLX 1280 1 32 13.39 / 2.23 $8,381.00

FLX 1650 1 32 17.25 / 2.88 $8,930.00

FLX 1870 1 32 19.56 / 3.26 $9,432.00

FLX 2410 2 34 25.20 / 4.20 $12,626.00

FLX 2850 2 34 29.80 / 4.97 $13,742.00

FLX 3220 2 34 33.67 / 5.61 $14,844.00

FLX 3980 3 35 41.62 / 6.94 $17,836.00

FLX 4610 3 35 48.21 / 8.04 $19,681.00

FLX 5030 3 35 52.60 / 8.77 $20,956.00


-30°CSST R404a

List Price

excluding GST

FLX 3000 SG 2 34 30.43 / 5.07 $15,826.00

FLX 3600 SG 3 35 36.52 / 6.09 $19,445.00

FLX 4500 SG 3 35 45.65 / 7.61 $21,156.00


-35°CSST R404a

List Price

excluding GST

FLX 3070 SB 2 36 29.78 / 5.96 $17,072.00

FLX 3680 SB 3 38 35.70 / 7.14 $21,794.00

FLX 4600 SB 3 38 44.62 / 8.92 $23,985.00

FLX SG SERIES ULTRA LOW TEMP ELECTRIC DEFROST STAGGERED FIN = 12.7-6.35mm / 2-4FPI

FLX SB SERIES SEMI BLAST LOW TEMP ELECTRIC DEFROST STAGGERED FIN = 12.7-6.35mm / 2-4FPI

EDEN FNX / FLX / FLXSG / FLXSB Series Evaporators

FAN DIAMETER 630mm


FNX SERIES MEDIUM TEMP AIR DEFROST = 4.2mm / 6FPI

FLX SERIES LOW TEMP ELECTRIC DEFROST = 6.35mm / 4FPI



-26°CSST R404a

List Price

excluding GST

ETLE/H 0150-1H 1 41 15.682 / 2.614 $11,981.00

ETLE/H 0220-1H 1 41 22.888 / 3.815 $13,663.00

ETLE/H 0250-1H 1 40 26.279 / 4.380 $15,783.00

ETLE/H 0320-2H 2 45 33.654 / 5.609 $22,641.00

ETLE/H 0460-2H 2 45 48.489 / 8.082 $25,363.00

ETLE/H 0580-2H 2 43 60.188 / 10.031 $29,031.00

ETLE/H 0300-2V 2 45 31.450 / 5.242 $24,744.00

ETLE/H 0440-2V 2 45 45.692 / 7.615 $28,277.00

ETLE/H 0500-2V 2 43 52.558 / 8.760 $31,770.00

ETLE/H 0650-4V 4 46 67.309 / 11.219 $44,623.00

ETLE/H 0930-4V 4 46 96.979 / 16.163 $50,574.00

ETLE/H 1160-4V 4 44 120.375 / 20.063 $56,638.00

EDEN ETLE Series Blast Freezer Evaporators

FAN DIAMETER 710mm


ETLE/H Electric or Hot Gas Defrost Staggered Fin = 12.7-6.35mm / 2-4FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. Coils c/w Eden smart circuitry4. Blue epoxy fin option available at extra cost5. Stainless steel casing available at extra cost6. Special circuitry for ultra low temp or liquid overfeed systems available7. Hot gas bypass available


0°CSST R404a

List Price

excluding GST

EPC 0220 1 x 250 12 3.31 / 0.33 $1,397.00

EPC 0260 1 x 250 12 3.92 / 0.39 $1,523.00

EPC 0320 1 x 250 12 4.82 / 0.48 $1,652.00

EPC 0430 2 x 250 12 6.48 / 0.65 $2,075.00

EPC 0540 2 x 250 12 8.13 / 0.81 $2,264.00

EPC 0630 2 x 250 12 9.49 / 0.95 $2,428.00

EPC 0700 3 x 250 13 10.54 / 1.05 $2,822.00

EPC 0890 3 x 250 13 13.40 / 1.34 $3,041.00

EPC 1040 3 x 250 13 15.66 / 1.57 $3,298.00

EPC 1200 4 x 250 13 18.07 / 1.81 $3,588.00

EPC 1370 4 x 250 13 20.63 / 2.06 $3,839.00

EPC 1510 4 x 250 13 22.74 / 2.27 $4,167.00

EPC 1760 5 x 250 14 26.50 / 2.65 $4,424.00

EPC 1920 5 x 250 14 28.91 / 2.89 $4,730.00


0°CSST R404a

List Price

excluding GST

DEPC 0440 2 x 250 2 x 12 6.63 / 0.66 $2,573.00

DEPC 0520 2 x 250 2 x 12 7.83 / 0.78 $2,853.00

DEPC 0640 2 x 250 2 x 12 9.64 / 0.96 $3,145.00

DEPC 0860 4 x 250 2 x 12 12.95 / 1.30 $3,991.00

DEPC 1080 4 x 250 2 x 12 16.26 / 1.63 $4,425.00

DEPC 1260 4 x 250 2 x 12 18.98 / 1.90 $4,878.00

DEPC 1400 4 x 250 2 x 13 21.08 / 2.11 $5,660.00

DEPC 1780 6 x 250 2 x 13 26.81 / 2.68 $6,098.00

DEPC 2080 6 x 250 2 x 13 31.32 / 3.13 $6,606.00

DEPC 2400 8 x 250 2 x 13 36.14 / 3.61 $7,191.00

DEPC 2740 8 x 250 2 x 13 41.26 / 4.13 $7,695.00

DEPC 3020 8 x 250 2 x 13 45.48 / 4.55 $8,291.00

DEPC 3520 10 x 250 2 x 14 53.01 / 5.30 $8,794.00

DEPC 3840 10 x 250 2 x 14 57.83 / 5.78 $9,406.00

EDEN EPC / DEPC dual blow series evaporators

FAN DIAMETER 250mm


EPC SERIES MEDIUM TEMP AIR DEFROST = 5.1mm / 5FPI

DEPC SERIES MEDIUM TEMP AIR DEFROST = 5.1mm / 5FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. Coils c/w Eden smart circuitry4. Copper (6 to 12FPI), or epoxy coated fin options available at extra cost5. Stainless steel casing available at extra cost6. CO2 applications for special orders7. Defrost Heaters are available at extra cost (only down to -10°CSST)

EDEN EFGP Matrix Series Air Cooled Condensers

ModelNo. of fans

/ diameterVolts / Phase

Noise Level

dB(A) @ 3m

Kw 15K/1K R404a

(High Speed)

List Price

excluding GST

EFGP 0046.21 1 x 300 240/1 50 4.55 / 0.30 $792.00

EFGP 0055.21 1 x 300 240/1 50 5.44 / 0.36 $914.00

EFGP 0065.21 1 x 300 240/1 50 6.43 / 0.43 $1,031.00

EFGP 0092.31 1 x 350 240/1 52 9.10 / 0.61 $1,296.00

EFGP 0115.31 1 x 350 240/1 52 11.37 / 0.76 $1,372.00

EFGP 0130.31 1 x 350 240/1 54 12.86 / 0.86 $1,530.00

EFGP 0144.41 1 x 400 415/3 54 14.24 / 0.95 $1,434.00

EFGP 0158.41 1 x 400 415/3 54 15.63 / 1.04 $1,610.00

EFGP 0195.41 1 x 400 415/3 54 19.29 / 1.29 $1,796.00

EFGP 0232.51 1 x 500 415/3 64 22.94 / 1.53 $2,215.00

EFGP 0286.51 1 x 500 415/3 64 28.30 / 1.89 $2,460.00

EFGP 0343.51 1 x 500 415/3 64 33.92 / 2.26 $2,736.00

EFGP 0384.51 1 x 500 415/3 64 37.98 / 2.53 $3,012.00

EFGP 0429.61 1 x 630 415/3 63 42.43 / 2.83 $3,798.00

EFGP 0485.61 1 x 630 415/3 63 47.97 / 3.20 $4,117.00

EFGP 0545.61 1 x 630 415/3 63 53.90 / 3.59 $4,494.00

EFGP 0587.61 1 x 630 415/3 63 58.05 / 3.87 $4,882.00

EFGP 0673.52 2 x 500 415/3 66 66.56 / 4.44 $5,275.00

EFGP 0783.52 2 x 500 415/3 66 77.44 / 5.16 $5,945.00

EFGP 0888.52 2 x 500 415/3 66 87.82 / 5.86 $6,619.00

EFGP 0933.53 3 x 500 415/3 68 92.27 / 6.15 $6,943.00

EFGP 1070.53 3 x 500 415/3 68 105.82 / 7.06 $7,820.00

EFGP 1170.53 3 x 500 415/3 68 115.71 / 7.71 $8,707.00

EFGP 1260.53 3 x 500 415/3 68 124.61 / 8.31 $9,632.00

EFGP 1385.54 4 x 500 415/3 69 136.98 / 9.13 $9,754.00

EFGP 1540.54 4 x 500 415/3 69 152.31 / 10.15 $10,853.00

EFGP 1625.54 4 x 500 415/3 69 160.71 / 10.71 $11,953.00

EFGP 1707.63 3 x 630 415/3 67 168.82 / 11.26 $13,170.00

EFGP 1890.63 3 x 630 415/3 67 186.92 / 12.46 $14,684.00

EFGP 2030.63 3 x 630 415/3 67 200.77 / 13.38 $16,049.00

EFGP 2254.64 4 x 630 415/3 68 222.92 / 14.86 $16,352.00

EFGP 2500.64 4 x 630 415/3 68 247.25 / 16.48 $18,063.00

EFGP 2650.64 4 x 630 415/3 68 262.09 / 17.47 $19,784.00

FAN DIAMETERS 300 / 350 / 400 / 500 / 630mm


EFGP STANDARD SERIES = 2.1mm / 12FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne3. Condensers c/w Eden smart circuitry4. Blue epoxy fins included as standard5. Stainless steel casing available at extra cost6. Copper fins available at extra cost7. EC motor option available at extra cost8. Standard air flow direction horizontal for single fan models, vertical for multiple fan models with horizontal air flow configuration by request.

Model No. of FansNoise Level

dB(A) @ 3m

Kw 15K/1K R404a

(High Speed)

List Price

excluding GST

EFGP 1790.821 2 56.5 177.0 / 11.8 $13,544.00

EFGP 2115.821 2 56.5 209.2 / 13.9 $14,776.00

EFGP 2225.821 2 56.5 220.1 / 14.7 $16,391.00

EFGP 2635.831 3 58.3 260.6 / 17.4 $19,083.00

EFGP 2990.831 3 58.3 295.7 / 19.7 $21,408.00

EFGP 3300.831 3 58.3 326.4 / 21.8 $23,391.00

EFGP 3600.841 4 59.5 356.0 / 23.7 $25,953.00

EFGP 4025.841 4 59.5 398.1 / 26.5 $28,539.00

EFGP 4335.841 4 59.5 428.7 / 28.6 $30,113.00

EDEN EFGP Single Row Jumbo Series Air Cooled Condensers

FAN DIAMETER 800mm


EFGP SINGLE ROW JUMBO STANDARD SERIES = 2.1mm / 12FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. High quality powder coated casing4. Coils c/w Eden smart circuitry5. Ziehl fan motors standard6. Blue epoxy fins included as standard 7. Stainless steel casing option available at extra cost8. Copper fins option available at extra cost9. EC motor option available at extra cost10. Dry cooler water circuits by request11. Vertical air flow configuration available only

Model No. of FansNoise Level

dB(A) @ 3m

Kw 15K/1K R404a

(High Speed)

List Price

excluding GST

EFGP 3580.84 4 59.5 354.1 / 23.6 $22,185.00

EFGP 4230.84 4 59.5 418.4 / 27.9 $24,448.00

EFGP 4450.84 4 59.5 440.1 / 29.3 $27,296.00

EFGP 5270.86 6 61.5 521.2 / 34.8 $31,796.00

EFGP 5980.86 6 61.5 591.4 / 38.4 $35,935.00

EFGP 6600.86 6 61.5 652.7 / 43.5 $39,502.00

EFGP 7200.88 8 62.5 712.1 / 47.5 $44,470.00

EFGP 8050.88 8 62.5 796.2 / 53.1 $49,290.00

EFGP 8670.88 8 62.5 857.5 / 57.2 $54,080.00

EDEN EFGP Jumbo Series Air Cooled Condensers

FAN DIAMETER 800mm


EFGP JUMBO STANDARD SERIES = 2.1mm / 12FPI

Notes:1. Product c/w industry leading Kaldaz 3 year warranty2. Above pricing is F.O.B. Melbourne Metro3. Coils c/w Eden smart circuitry4. Blue epoxy coated fins included as standard5. Stainless steel casing option available at extra cost6. Copper fins option available at extra cost7. EC motor option available at extra cost8. Dry cooler water circuits by request9. Vertical air flow configuration available only

KALDAZ PTY LTD COMMERCIAL CREDIT TRADING TERMS AND CONDITIONS

FOR 30 DAY CREDIT ACCOUNT

References to “the Supplier” or “Kaldaz” means KALDAZ Pty Ltd ABN: 617 815 611, and “the Customer” means the purchaser of any goods and in the case of a

company shall include its successors agents and permitted assigns and in the case of an individual shall include that individual’s administrators and executors.

Please read the undermentioned terms carefully. If you do not understand these terms of trade you should seek legal advice.

1. The agreed trading terms are 30 days from end of month, i.e., payment is due 30 days from date of monthly statement, or that payment is due by the last

working day of the month following the monthly Statement.

2. The Customer further agrees to indemnify the Supplier for any legal costs incurred by the Supplier (including but not limited to charges & commission charged

by mercantile agents) in respect of this application, agreements, personal guarantees, securities given or other documentation required whi lst credit is being

offered in consequence of this application, and the Customer further agrees to indemnify the Supplier for any dishonoured cheque fees incurred and in the event

that the Customer’s account is in default of the agreed trading terms to indemnify the Supplier against its collection fees & legal costs.

3. The Supplier may withdraw credit facilities to the Customer at any time without notice. Without limiting the supplier’s rights to withdraw credit, the Supplier

reserves the right to stop supply & place the account on hold until the account is returned to the agreed trading terms, and the Supplier agrees to recommence

supply.

4. These Trading Terms and Conditions apply to all transactions from which the Customer is supplied goods & or services on credit. If any future contract between

the Supplier & the Customer is inconsistent with these Trading Terms and Conditions, then these Trading Terms and Conditions will apply unless the subsequent

contract refers to and specifically alters these Trading Terms and Conditions in writing.

5. Should there be any variation to any of the information supplied by the Customer in this application or in the structure of the Customer’s business (such as a

conversion to or from a company or trust or the appointment of new directors), the Supplier shall be notified in writing.

6. Until a new Commercial Credit Application form is signed and approved in writing by the Supplier, then the original Commercial Credit Application and those

person(s) who signed as guarantor(s) shall remain liable to the Supplier as though all goods and services were supplied to the original customer.

7. The Supplier reserves the right to amend these trading terms provided such amendments are conveyed to the Customer in writing. The Customer further

acknowledges that such writing will be by ordinary mail to the address set out in the Commercial Credit Application, unless the Customer advises in writing to the

Supplier a new address, and this new address is acknowledged by return in writing by the Supplier.

8. The Supplier shall be entitled at any time to assign its rights under this Commercial Credit application to its successors, nominated transferees or assigns

(including but not limited to, where applicable personal guarantees), and that these Trading Terms and Conditions shall not be in any way affected or discharged

pursuant to such an assignment.

9. Caveatable Interest Clause: In the event of Default of the agreed trading terms by the Customer, then the Customer by its Director(s) / Proprietor(s) / Partners /

Individual(s), nominated in this application hereby charge all their Right, Title of Interest (if any) to any or all property(ies) owned/partly owned, acquired in the

future, solely or jointly by the said Customer / Director(s) / Proprietor(s) / Partners / Individual(s) of this application in favour of the Supplier, to better secure all

monies owed to the Supplier as of the date of the default, with the due and punctual observance and performance of all of the obligations of the Customer. Such

Customer acknowledges that the Supplier may at its discretion, register a caveat on such property in respect of the interest conferred on it under this clause. In the

event that the Supplier is required to exercise its right under this clause, against the Customer, then the Customer grants the Supplier the right to appoint a

Receiver and sell the property(ies).

10. RETENTION OF TITLE. Until ALL INVOICES are paid in full, and ALL MONIES receipted and cleared, ownership of the goods remain with the Supplier, but the risk

passes to the Customer on delivery. Delivery shall occur if the Supplier or its Agent delivers, on delivery, and/or if the Customer or its Agent(s) takes delivery, at

that point of delivery. Until the Supplier is paid in full, the relationship of the Customer to the Supplier shall be fiduciary in respect of the goods and the customer

shall hold the goods as bailee only for the Supplier.

The Customer shall store the goods separately from its own until ownership has manifested in the Customer. Should the goods be on-sold to a third party before

payment, or in the event of the Appointment of an Administrator, Controller, Managing Controller, Receiver or Receiver Manager, or entry into an Informal/Formal

Deed of Arrangement under Bankruptcy Act of 1966 by the Customer, then the Customer hereby assigns to the Supplier its right of recovery of payment from the

third party. The money(ies) resulting from the sale of goods are to be specifically earmarked and placed in a separate account on trust for the Supplier, until

payment in full is made to the Supplier for the cost of the goods only, to guarantee clear passage of ownership to the third party innocent purchaser.

In the event the Customer is in default of the agreed trading terms, then the Customer without reservation grants right of entry to any or all properties under the

Customer’s control, where the goods are reasonably expected to be stored. The Customer indemnifies and save harmless the Supp lier, its servants or agents in

relation to loss or damage as a result of the retaking of possession of the said goods. Further in the event the Supplier exercises its right of retaking possession of

the said goods, the Customer grants power of sale to the Supplier to resell the said goods and the Customer acknowledges that any shortfall owing after the said

goods are resold will be the responsibility of the Customer.

11. DELIVERY. Deliveries shall be made during normal working hours. Deliveries required outside normal working hours will be delivered on r equest of the

Customer, and all charges will be the sole responsibility of the Customer. In the event the Customer or the Customer’s Agent is not on site to accept the delivery,

then the driver’s signature denoting the time, date and place of delivery, shall be deemed to be acceptance of the said delivery whether by the supplier or the

supplier’s agent. The date of delivery set forth in the order form is made in good faith, but the performance of the Supplier ’s engagement is subject to industrial

disturbances, delay in transit, damage to goods in transit, shortage of goods and any other cause beyond reasonable control of the Supplier. The Supplier shall be

excused from failure to deliver or complete, which is contributed to by any such cause, and the time specified for completion of delivery shall be extended

commensurately. Delay in delivery or completion shall not constitute a breach of contract, nor shall it affect any other prov isions of the contract to the Supplier’s

disadvantage.

12. SERVICE OF DOCUMENTS. The Customer acknowledges that service of all documents will be prepaid postal addressed envelope to the address nominated on

the Commercial Credit Application form, unless a new address is provided by the Customer and such new address is acknowledged by return in writing from the

supplier. Note the Customer expressly acknowledges that service is deemed to be effected after the expiration of 2 working days from date of posting of the

documents.

13. TELEPHONE ORDERS. All telephone orders are to be immediately confirmed in writing by the Customer. In the event the confirmation varies from that

recorded and processed by the Supplier, then the Supplier’s records shall prevail.

14. ACCESS TO SITE. The customer at all times is responsible to ensure suitable access to the site. The Customer further indemnifies and saves harmless the

Supplier, and or its servants or agents against any loss or damage, in the event the Supplier fails to provide suitable access to site for delivery, and or whilst on site

working.

15. PRICE. All goods are sold at the price current at the time of delivery. The price of goods is at the Suppliers works. Costs and charges for freight and handling at

the point of delivery to the Customer or the Customer’s agent are payable by the Customer unless otherwise stated on the quote/order form. NOTE:- Pricing may

vary from time to time subject to exchange rate variations and/or material increases outside the control of the Supplier.

16. PAYMENT. The Customer expressly acknowledges that at the absolute discretion of the Supplier, the Customer may be required to execute an authority to the

Customer’s Bank authorizing a direct debit from the Customer’s Bank account, to the Supplier for all sums due on a monthly basis. The authority will be irrevocable

without the express written consent of the Supplier.

17. FINANCIAL INFORMATION. The Customer agrees to provide financial information as is reasonably required by the Supplier from time to time, for the

assessment of current and future credit limits only. The Supplier and the Customer further agree that such information shall be treated as strictly confidential and

will not be disclosed to any third party(ies) without the express written permission of the Customer.

18. CREDIT CLAIMS. It is the responsibility of the Customer to carefully inspect the goods immediately they are delivered. Credit Claims will only be recognised if

made in the first instance by phone within 72 HOURS of receipt, and also in writing within 7 days of delivery.

Claims outside this period will be at the absolute discretion of the Supplier, and its decision final and binding on the Customer. All goods returned must be in

original condition and packaging and complete in every detail. Goods will only be accepted if the freight is prepaid by the Customer (except due to error of supply).

19. RETURN OF, OR CANCELLATION OF GOODS ORDERED. In the event the Customer elects to return goods or cancel goods on order, the Supplier at its absolute

discretion reserves the right to charge a 10% handling fee on the amount involved. Further, no return of goods will be accepted without prior approval of the

Supplier in writing.

20. SPECIAL ORDERS. Special orders will attract a 50% deposit which will be debited to the Customer’s account upon receipt of a written order for goods outside

our normal stock line, or for goods specifically modified to the Customer’s requirements. NOTE - No return of or cancellation will be accepted once the order has

commenced production.

21. WARRANTY. Kaldaz warrants all their unitary products to be free from faulty workmanship for a period of twelve (12) months or one (1) year and Eden heat

exchange products only for a period of thirty six (36) months or three (3) years from date of delivery subject to the following terms and conditions:

21.1 No warranty work will be completed whilst ever the Customer’s account is in default of the agreed trading terms.

21.2 This warranty is valid only to equipment sold to the original purchaser from Kaldaz and is not transferrable.

21.3 In the event of any defect required to be rectified under this warranty, warranty claim form must be filed within fourteen (14) days from the date

of the equipment failure.

21.4 The Supplier will not accept goods returned for warranty work, unless the freight is prepaid by the Customer.

21.5 Replacement of parts during the warranty period shall only be made upon verification by Kaldaz of the defective parts, that is, it is to be at Kaldaz’s

discretion.

21.6 Parts replaced during the warranty period carry the same warranty period as equipment.

21.7 All defective parts must be returned to Kaldaz within thirty (30) days after the delivery of replacement parts, failing which, all the costs incurred

shall be borne by the customer.

21.8 This warranty does not cover any losses and damages caused directly or indirectly by breakdown of the equipment and all other warranties or

guarantees expressed or implied other than those mentioned herein.

21.9 EXCLUSIONS: Unless specifically agreed in the contract documents, this warranty does not include the following costs and expenses:

a. Labour to remove or reinstall any equipment, materials or components.

b. Shipping, handling, transportation charges, tax and duties.

c. Consumable parts – e.g. oil, filter / dryers, refrigerants etc.

d. Product loss or consequential damages of any kind.

e. Liquidated damages, project delay penalties of any kind.

f. Site insurance or any regulatory fees of any kind.

21.10 This warranty shall be void if:

a. Equipment is not installed, operated, maintained and/or serviced by the customer.

b. Equipment is damaged by neglect, tampering, misuse, accidence, or is damaged while in transit or delivery.

c. Equipment is installed less than 500 metres from any marine environment (salt water ocean or lake), or suffers corrosion caused by

chemicals, eg. brick cleaning acids, chemical plants, etc. unless expressly approved for same in writing by Kaldaz.

d. Equipment is damaged due to dirt, air, moisture, or other foreign matter entering the refrigeration system.

e. Equipment has undergone any attempt of modifications.

f. Defects on the equipment are caused by any abnormal operating condition or procedure such as incorrect power supply input, high/low

ambient temperature, and incorrect refrigerant charges.

g. Defects on the equipment are directly or indirectly caused by fire, lightning or other natural disasters or where defect is due to deviation

from recommended application.

h. The serial number of the equipment, (compressor, fan motor, evaporator etc) has been altered, defaced, tampered with or removed.

i. Equipment is damaged due to insufficient protective devices being installed.

22. DAMAGES. The Supplier shall not be liable for any amount greater than the sales price of the product originally supplied. Without limiting the meaning of this

clause, the Supplier shall not be liable for any claims, loss, expense whatsoever, how so ever arising, or in any event in any way whatsoever for any contingent,

consequential direct/indirect special, or punitive damages arising in relation thereto, and the Customer acknowledges this express limit or liability and agrees to

limit any claim accordingly. Further the Supplier shall not be responsible directly or indirectly for any consequential loss or maintenance, use or operation of the

product by the Customer, or to any third party, or from any failure of the product whether defective or not.

23. GST. The Supplier is required by law to pay Goods and Services Tax, (GST) on any work, the subject of this estimate/quote. GST will be in addition to the

estimate/quote provided, if it is not shown otherwise.

24. ENVIRONMENTAL REQUIREMENTS. The Customer confirms and acknowledges it has made all inquiries in relation to all responsibilities conferred upon the

Customer, by the said Act, relating to storage of and disposal of any or all products supplied by the Supplier.

25. INSURANCE. NO INSURANCE IS PROVIDED BY THE SUPPLIER. The Customer acknowledges that insurance of all goods are the responsibility of the Customer at

point of delivery.

26. JURISDICTION. The Customer acknowledges that the Laws of the State of the Victoria shall govern this contract, and the Customer hereby agrees to submit to

the nonexclusive jurisdiction of the Courts of Victoria.

THE ABOVE INFORMATION IS FOR CUSTOMER TO RETAIN

CREDIT ACCOUNT APPLICATION FORM (Private and Confidential)

BUYER’S TRADE NAME: ..................................................................................................................... DATE:…………………………

BUYER’S FULL or LEGAL NAME: .......................................................................................................................................................

ALL BUYERS TO COMPLETE

Phone: ........................................................................................................ Fax: ...............................................................................

Mobile: ........................................................................................................ Email: ...........................................................................

BILLING ADDRESS: .................................................................................. BUSINESS ADDRESS: ................................................

..................................................................................................................... .......................................................................................

STATE: ......................................... POSTCODE: ................................... STATE: ...................................... POSTCODE: .........

DATE BUSINESS COMMENCED……………………………………….....

Sole proprietorship

Partnership

Company

Trust

COMMERCIAL BUYERS ONLY ABN: .............................................................................

Requested Credit Limit: ............................................................................. Date Established: .........................................................

Contact 1: ................................................................................................... Contact 2: .....................................................................

Position: ...................................................................................................... Position: ........................................................................

Phone: ........................................................................................................ Phone: ..........................................................................

DETAILS OF OWNER (If Sole Trader) PARTNERS (If Partnership) OR DIRECTORS (If Proprietary Company)

Full Name: .................................................................................................. Full Name: ....................................................................

Home Address: ........................................................................................... Home Address: ............................................................

..................................................................................................................... .......................................................................................

Home Phone: .............................................................................................. Home Phone: ...............................................................

TRADE REFERENCES

Business Name 1: ...................................................................................... Business Name 2: ........................................................

Address or A/C No: .................................................................................... Address or A/C No: ......................................................

Phone: ........................................................................................................ Phone: ..........................................................................

Fax: ............................................................................................................. Fax: ...............................................................................

Email: ………………………………………………………………………….. Email: ……………………………………………………..

Kaldaz Pty Ltd

Level 2 180 Queens Street

Melbourne Vic 3000

Phone: +613 9005 1574

[email protected]

www.kaldaz.com.au

mailto:[email protected]

http://www.kaldaz.com.au/

I certify that the above information is true and correct and that I am authorised to make this application for credit. I have read and understand the TERMS AND CONDITIONS OF TRADE (overleaf) of Kaldaz Pty Ltd which form part of, and are intended to be read in conjunction with this Credit Account Application and agree to be bound by these conditions. I agree that if I am a director

or owner or partner of the Buyer I shall be personally liable for the performance of the Buyer’s obligations under this contract.

SIGNED: ..................................................................................................... SIGNED: .......................................................................

Name: ......................................................................................................... Name: ...........................................................................

Position: ...................................................................................................... Position: ........................................................................

ID: ............................................................................................................... ID: .................................................................................

Date: ............................................................................................................ Date: ……………………………………………………..

Documents

PRICE LIST - Kaldaz Price...Model No. of Fans / Diameter Watts 6K/1K @ -4 CSST R404a List Price excluding GST ENC 400 1 x 105mm 363 / 61 $518.00 ENC 490 1 x 105mm 444 / 74 $552.00