Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
The best of TIG welding using inverter technologyfor the most demanding welders.
www.saf-fro.com
PRESTOTIG II DCIndustrial range
NEW
EASY FRONT PAN
EL
20152015
222222222
201520152015
555555555
W
AAE
N
A
T
Single or three-phase portable
inverters for MMA and TIG DC
high quality work on non-alloyed
or stainless steels.
PRESTOTIG II DC Industrial range
2570
-21
PRESTOTIG II 210 DC, 310 DC (W), 410 DC(W)Reduced weight and size, high-resistance steel cabinet, maximum safety withthe built-in VRD (Voltage Reduction Device), unit transportable using dedicatedcarriages for work in severe conditions. Possibility to connect to a remotecontrol or foot-operated pedal and separate gas to torch connection, protectionagainst dust and spatter, the user friendliness is increased due to the controlsgrouped on the front panel.
Product advantages: • Multi-process unit: TIG DC, MMA (all stick electrode)• Continuous, spot, pulsed welding
(on the ADVANCED version)• Complete welding cycle for the ADVANCED
version and simple cycle for the EASY model.• HF or “contact” arc striking (on the ADVANCED version)• Synergic pulsed system• Automatic hot start for easier arc striking
according to type of coated electrode used• Adjustable arc dynamics to optimize electrode melting
according to electrode type (rutile, basic or cellulosic)• Modular: air or water cooled• VRD available
To orderEASY version - W000381665 -ADVANCED version W000279723 W000279724 W000279725
Option and accessoriesCOOLERTIG II DC W000279722Trolley T3 W000277087
Manual remote control5 m W000263311 (RC1)
10 m W000270324 (RC1)Foot-operated remote control W000263313 (FP1)
PRESTOTIG II 210 DC PRESTOTIG II 310 DC (W) PRESTOTIG II 410 DC (W)Primary power supply, 230 V single-phase (+/-10%) 400 V three-phase (+20% / -15%)Absorbing power at maxi. intensity 6.5 kVA 8.4 kVA 13.8 kVAOpen circuit voltage 80 V 80 V 80 V
Duty cycleat 40 °C
at 35% 200 A 300 A 400 Aat 60% 150 A 230 A 320 A
at 100% 130 A 200 A 270 AWelding current 5 to 200 A 5 to 300 A 5 to 400 AElectrode diameter max. 4.0 mm 5.0 mm 6.0 mmDimensions(l x w x h)
Power source 410 x 180 x 390 mm 500 x 180 x 390 mmPower source + Cooling unit - 500 x 180 x 650 mm
WeightPower source 15 kg 22 kg 23 kgPower source + Cooling unit - 33 kg 34 kg
Standards EN 60974-1 ; EN 60974-10
Technical characteristics
This equipment are designed for industrial and professional use only and does not comply with EN 61000-3-2/12. If it is connected to a public low voltage system, it is the responsibility ofthe installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be connected. (See also the instruction manual)
MODULAR
2011
-128
• HF arc striking• 2T / 4T• Adjustable pre
and post-gas• Adjustable arc
dynamics
NEW
EASY FRONT PAN
EL
20152015
222222222
201520152015
555555555
W
AAE
N
A
T
PRESTOTIG II DC Industrial rangeUltimate performance in all conditions
Designed to meet the expectations of the most demanding welders,PRESTOTIG II DC welding units were developed in detailed correlationwith on-going changes in requirements. They provide optimumperformance associated with the ruggedness necessary for daily workboth in the workshop and on site. They all have a complete weldingcycle for the ADVANCED version and simple cycle for the EASY model.
3551
-009
2011
-107
2011
-109
2011
-111
Welding consumables As a selection of the wideSAF-FRO welding consumablesrange you can see here underTIG rods for the most commonapplications.
Many other types of steelor alloys are availble.Do not hesitate to consult us.
• For high demanding sectors of activity.
2010
-835
PRESTOTIG II DC
2001
-316
2001
-317
Shipbuilding
Petrochemicals
2008
-760
Offshore
Boiler making
Piping
• High qualitywelding resultson carbon andstainless steels.
Applications Classification Designation Diameter Cat. number
Carbon steels ER 70S-6 (AWS A 5-18)W42 4 W3Si1 (EN ISO 636-A)
ALTIG SG 2
1.2 mm W0002833271.6 mm W0002833282.0 mm W0002833292.4 mm W0002833303.2 mm W000283331
Stainless steels
ER 308L (AWS A 5-9)W19 9 L (EN ISO 14343-A)
ALTIG 308L
1.2 mm W0002834191.6 mm W0002834202.0 mm W0002834212.4 mm W0002834223.2 mm W000283423
ER 316L (AWS A 5-9)W19 12 3 L (EN ISO 14343-A)
ALTIG 316L
1.2 mm W0002834551.6 mm W0002834562.0 mm W0002834572.4 mm W0002834583.2 mm W000283459
On the ADVANCED version of PRESTOTIG II DC,pulsed TIG and “synergic” pulsed TIG are available.With the adjustment of all pulse parameters, the pulsedTIG process allows better control of the weld pool.
2011
-119
2014
-646
PRESTOTIG II DC EASY version front panel
Options and accessories for PRESTOTIG II DC
Remote control
To order
RC1 for directcurrent range
5 m W00026331110 m W000270324
2006
-649
Foot-operated control pedal
To order
FP1 for directcurrent range
5 m W000263313
2006
-651
Trolley T3
A trolley for easy transport of:• PRESTOTIG II DC• COOLERTIG II cooling unit• Gas cylinder (size B20 max.)• Torches and accessories
that can be carefully storedor rolled
2010
-270
To orderTrolley T3 W000277087
2011
-119
PRESTOTIG II ADVANCED version front panel
10
9
2 3 4
5
6
7
8
11
10
9
2 3
5
6
7
8
11
The synergic pulsed system is an additionalmode proposed to make adjustment of the uniteasier. With the synergic pulsed system, there is
no need to adjust the low current, the ratioand the frequency. All parameters depend ofthe pre-programmed welding current. Thepulse frequency gives a high, concentratedarc and increases welding speed.
Power on indicatorThermal safety indicatorSupply voltage defectindicatorPulsed TIG / Synergicpulsed TIG / Spot TIGselection(advanced version)Post-gas adjustmentWelding parametersadjustmentDisplayWeldingparameterselection keys2T / 4T - triggermode selectionMMA weldingselectionRemote controland Set UpselectionTIG High frequencyor TIG Lift arcstriking selection
1
2
3
4
5
6
7
8
9
10
11
12
2011
-125
12
1
12
1
Synergic Pulsed TIG
2011
-005
The new range of PROTIG NG TIG torches perfectly fit
with the high level of quality provided by the PRESTOTIG II DC
industrial range.
Modular system:
All torches are delivered with a singlebutton module. If you want anothercontrol module, order it separatly.
2011
-007
TIG torches
2000
-173
The adapted models are PROTIG NG 20, 40, 10Wor 35W (air or water cooled torches). They come:
• either with trigger as a blade: RL models• or as a button: EB types.
The EB types are modular as they can bemodified with the different type of buttons.
See complete range in the PROTIG NG brochure
PROTIG NG 20RL C5B
PROTIG NG 40RL C5B
PROTIG NG 10WRL C5B
PROTIG NG 35WRL C5B
Cooling Air Water
Duty Cycle 150 A at 35%100 A at 60%
250 A at 35%200 A at 60% 250 A at 100% 350 A at 100%
To order 5 m: W0002783688 m: W000278369
5 m: W0002783728 m: W000278373
5 m: W0002783748 m: W000278375
5 m: W0002783768 m: W000278377
Cat. number maintenance
box W000306442 W000306444 W000306441 W000306444
2010
-643
2010
-650
RL: Blade
2011
-007
PROTIG NG 20EB C5B
PROTIG NG 40EB C5B
PROTIG NG 10WEB C5B
PROTIG NG 35WEB C5B
Cooling Air Water
Duty Cycle 150 A at 35%100 A at 60%
250 A at 35%200 A at 60% 250 A at 100% 350 A at 100%
To order 5 m: W0002783968 m: W000278397
5 m: W0002784008 m: W000278401
5 m: W0002784028 m: W000278403
5 m: W0002784048 m: W000278405
Cat. number maintenance
box W000306442 W000306444 W000306441 W000306444
EB: Button
1 2 3 4
Horizontal potmeter - W000279370
Vertical potmeter - W000279246
Doublon button - W000279242
Blade - W000279245
For potmeter adapt the wiring to the weldingmachine using the 7 pins plug - W000271826
1
2
3
4
In option: Adjustable heads
As an option, adjustable torch bodies areavailable. Welding in inaccessible locationsbecomes easier. You have the choice of2 heads, small and large to be mountedon air cooled or water cooled bodies.
2010
-946
2010
-947
Choose one body and one headto get a complete torch.Air cooled body - W000279381
Water cooled body - W000279382 (1)
Head PROTIG NG 10 (2) - W000279383
Head PROTIG NG 20 (3) - W000279384(1) : duty cycle : 220 A @100%(2) : duty cycle : 125 A @ 35%(3) : duty cycle : 145 A @ 35%
ContactsBELGIUMAIR LIQUIDE WELDING BELGIUM SAZ.I. West Grijpen - Grijpenlaan 5 - 3300 TIENENTel.: +32 16 80 48 20 - Fax: +32 16 78 29 22
CHINAAIR LIQUIDE WELDINGHANGZHOU SAF-OERLIKON Weld. and Cut. Co. Ltd.185, Kangtai Road Qianjiang Eco. and Dev. ZoneYuhang District HANGZHOU China 311106Tel.: +86 21 64 43 89 69 - Fax: +86 21 64 43 58 97
CZECH REPUBLIC AIR LIQUIDE CZ S.R.O. - Welding and CuttingPodnikatelská 565 - Areál SVUM - 190 11 PRAHA 9 - BúchoviceTel.: +420 274 023 163 - Fax: +420 274 023 233
FRANCEAIR LIQUIDE WELDING FRANCE13, rue d’Épluches - CS 10113 Saint-Ouen l’Aumône95315 CERGY PONTOISE CedexTel.: +33 1 34 21 33 33 - Fax: +33 1 34 21 31 30
GERMANYOERLIKON SCHWEISSTECHNIK GmbHIndustriestrasse 12 - D-67304 EISENBERG/PFALZTel.: +49 6351 4760 - Fax: +49 6351 476 335
HUNGARYsee address in Romania
ITALYFRO-AIR LIQUIDE WELDING ITALIA S.p.ALoc. Casalmenini 3, 37010 - RIVOLI-VERONESE (VR)Tel.: +39 045 82 91 511 - Fax: +39 045 82 91 536
LUXEMBOURGAIR LIQUIDE WELDING LUXEMBOURG S.A.5 rue de la Déportation - BP 1385 - L-1415 LUXEMBOURGTel.: +352 48 54 56 - Fax: +352 48 54 57
MALAYSIASAF-OERLIKON MALAYSIA SDN BHDNo 10, Jalan TPP 5/1Taman Perindustrian Puchong - 47100 PUCHONG, SELANGORTel.: +603 8060 8638 - Fax: +603 8061 620
NETHERLANDSAIR LIQUIDE WELDING NETHERLANDSRudonk 6 B - NL 4824 AJ BREDATel.: +31 76 541 00 80 - Fax: +31 76 541 58 96
POLANDAIR LIQUIDE WELDING POLSKA - SP. Z.o.oUL. Porcelanowa 10 - 40-246 KATOWICETel.: +48 32 609 04 50 - Fax: +48 32 609 04 60
PORTUGALAIR LIQUIDE SOLDADURA LDARua Dr. António Loureiro Borges, 4-2° ArquiparqueMiraflores - 1495-131 ALGÉSTel: +351 21 41 64 900 - Fax: +351 21 41 69 40ROMANIADUCTILAleea Industriilor Nr 1 - 120224 BUZAUTel.: +40 238 722 058 - Fax: +40 238 716 861RUSSIAAIR LIQUIDE WELDING17 Vorontsovskaya Str. - 109147 MOSCOW Tel.: +7 495 641 28 98 - Fax: +7 495 641 28 91SCANDINAVIAOERLIKON SKANDINAVIEN ABKrossverksgatan 7 - 216 16 LIMHAMNTel.: +46 (0)40 670 15 00 - Fax: +46 (0)40 670 15 01SLOVAKIAAIR LIQUIDE WELDING CENTRAL EUROPE S.R.O.Hlohovecká 6 - 951 41 NITRA - LUŽIANKYTel.: +421 37 692 4610 - Fax: +421 37 651 28 04SPAINOERLIKON SOLDADURA SAPoligono Industrial la Noria Carretera de Castellon Km-15,500 - 50730 El Burgo de Ebro - ZARAGOZATel.: +34 976 10 47 00 - Fax: +34 976 10 42 67SWITZERLANDOERLIKON SCHWEISSTECHNIK AG Mandachstrasse 54 - CH 8155 NIEDERHASLI Tel.:+41 44 3076 111 - Fax: +41 44 3076 112THAILANDEAIR LIQUIDE WELDING THAILAND Co. Ltd.40 Moo 6 - Ramindra Road Km 9.5KHANNAYAO, BANGKOK 10230Tel.: +66 29 43 2250 - Fax: +66 29 43 2256UAEAIR LIQUIDE WELDING MIDDLE EAST FZEJebel Ali free zone warehouse No. FZS1AH05P.O. BOX 18734 - Jebel Ali - DUBAITel.: +971(0)48861606 - Fax: +971(0)48861608U. K.AIR LIQUIDE WELDING LtdLow March / London Road - DAVENTRY - Northants NN11 4SDTel.: +44 1 327 70 55 11 - Fax: +44 1 327 70 13 10UKRAINEAIR LIQUIDE WELDING UKRAINE, Llc.Moskovskij Prospect 199 - Office 339 - 61037 KHARKOVTel.: +38 057 728 08 52- Fax: +38 057 728 08 53
Air
Liqu
ide
Wel
ding
Fra
nce
rese
rves
the
rig
ht t
o ca
rry
out
mod
ifica
tions
to
its m
achi
nery
with
out
prio
r no
tice.
The
man
ufac
ture
r ac
cept
s no
liab
ility
for
illust
ratio
ns, d
escr
iptio
ns a
nd c
hara
cter
istic
s, w
hich
are
for
info
rmat
ion
only.
© A
LW -
01/
2015
- H
1 -
PLD
B 9
521
World leader in gases, technologies and services for Industry and Health, Air Liquide is present in 80 countries with more than 50,000 employees andserves more than 2 million customers and patients. Oxygen, nitrogen and hydrogen have been at the core of the company’s activities since its creation in 1902.Air Liquide’s ambition is to be the leader in its industry, delivering long-term performance and acting responsibly.
Contacts for other countries:Air Liquide Welding Export Department Italy FRO-AIR LIQUIDE WELDING ITALIA S.p.ALoc. Casalmenini 3, 37010 - RIVOLI-VERONESE (VR)Tel.: +39 045 82 91 511Fax: +39 045 82 91 536
Air Liquide Welding Export Department France13, rue d’ EpluchesCS 10113 Saint-Ouen l’Aumône95315 CERGY-PONTOISE CedexTel.: +33 1 34 21 33 33 - Fax: +33 1 30 37 19 73