Power Xpert Architecture Power Xpert Reporting

Power Xpert Reporting Power Xpert Architecture

Get the big picture. Set the goals. Track and realize the savings.

Power XpertT Reporting

You may already be measuring your energy consumption and keeping an eye on harmonics, voltages and other power quality events, and of course you keep circuit load levels in check with your Power Xpert Software. You may even be doing some calculations on the actual power usage costs.

However, now you have come to a point where the amount of data is overwhelming. You need to see past individual measure-ments, trend graphs and events. Your vision needs to stretch across dozens of specific power distribution devices and over multiple sites around the enterprise network. You need all of this complex data to be analyzed and boiled down to what is really important. Also, you need to automatically consolidate this into an easy-to-understand graphical report template. After all, at the end of the day, it’s you who needs the data and understands the big picture.

Seeing the forest for the trees can sometimes be extremely hard, especially when you are trying to detect trends and patterns in a facility’s electrical power distribution grid with a multitude of devices. There are too many parameters, devices, departments and locations. And what if the system is nationwide? How do you decipher all of this information and extract and pinpoint the vital statistics you need? How do you compare, for example, your energy consumption between several departments and locations? How much did the energy cost? What about power quality trends and load peaks and capacity?

Wouldn’t it be nice to get all of this information in a convenient report? A report that has the numbers and events boiled down to intuitive graphs and charts? A report that clearly allocates energy costs, compares consumption, monitors branch circuits, keeps capacity in check and summarizes your power quality? Power Xpert Reporting has all of this built in. You will get the big picture every time! And you get it delivered via e-mail automatically at intervals that you define.

Seeing the forest for the trees

Power Xpert Reporting, along with the Power Xpert Software, can help a building or campus go green and qualify for Leadership

in Energy and Environmental Design (LEEDT) credits through the U.S. Green Building Council (USGBC).

Power Xpert Reporting is a key component to help you go green

Power Xpert Reporting helps you understand and manage your critical power systems and energy flow as a whole, provid-ing you with a short-term and long-term view of your individual and overall power consumption.

It allows you to easily compare month-to-month energy usage graphs throughout your facility

and campus. It will automatically store the energy data for long-term analysis. Report scheduling and report subscriptions can be set up to keep you automatically updated on what’s going on with the power consumption and quality in your facilities, helping you achieve your savings and green goals.

Comparing short- and long-term usage across all facilities

3EATON CORPORATION Power Xpert Architecture

4 EATON CORPORATION Power Xpert Architecture

• Understand baseline energy consumption—get kWh as well as a clear dollars-and-cents report

• Compare different facilities’ and departments’ energy consumption and allocate costs

• Identify power hogs and cost-saving opportunities

• Track energy-saving initiatives and investments’ performance

• Have energy management reports delivered to you via e-mail, when you want them, to keep a constant check on your energy efficiency

• Use built-in report templates to effortlessly present energy-related data in crisp graphical charts

• Avoid unscheduled shutdowns due to circuit overloading; monitor branch circuit balances and trends

• Review and track minimum, average and maximum circuit utilization

• Minimize no-load losses, primary contributors to data center electrical costs

• Understand data center energy consumption baseline and allocate costs

• Compare different data center facilities for energy consumption, efficiency and costs

• Get power quality reports automatically delivered to you via e-mail at predefined intervals

“Power Xpert Reporting tells me that cost allocation and new energy-efficient equipment has already saved us $100,000 this year… maybe we should do the same for our operations in Paris!”

“I found out that we have a dozen circuits with hardly any loads at all. No-load losses are a primary contributor to my data center costs.”

Energy Manager

IT Manager

My Favorite Reports

My Favorite Reports

My Favorite Reports

• Understand the overall power quality in the facilities you manage. How many transients, sags and swells are hitting your equipment every month? Are harmonics causing transformers to overheat equipment to fail early?

• Compare consumption between different facilities

• Identify power quality problem facilities, areas and departments, and pinpoint opportunities for mitigation

• Track power quality mitigation investments’ performance. For example, did the installation of a SPD, harmonic filter effectively rid you of problems?

• Spot check your power quality actuals compared to baseline or other facilities through regular delivery of reports to your e-mail inbox

• Run the built-in Joint Commission report to effectively capture accreditation data during backup power system tests

• Check and track generators’ vital statistics and trends

• Identify power quality events occurring in the hospital environment and potential contributors

• Identify excessive power consumers and cost-saving opportunities

• Arrange to have automatic updates of reports e-mailed to you, based on your accreditation timeline

• Audit your Emergency Power Supply Systems (EPSS)

• Save time and money honoring your compliance obligations

“I was able to see that my plant in San Diego uses 35%–40% more energy than the similar one in Chicago and take appropriate action.”

“The standard Joint Commission report keeps my hospital accredited, and I get automatic, itemized reports on the most excessive power users too.”

Health Care Manager

Facility Manager

My Favorite Reports


Standard set of reports built in, plus custom reportsForget about tedious report building and development. Power Xpert Reporting has a standard set of reports that are built right into the software. Simply choose the one you need out of thirteen ready-to-go report templates. Then schedule Power Xpert Reporting to run the report automatically and send you a new report via e-mail at predefined intervals.

Energy Summary Report: The summary of consumption (kWh) and demand (kW) for a user-defined date/time range and facility hierarchy location

Energy Cost Allocation Report: The total energy bill dollar value or a cost per kWh across a facility hierarchy for a user-defined date/time range

Data Center Efficiency Report: A summary of data center infrastructure efficiency and power usage effectiveness, including such information as temperature and humidity, and energy consumption

Utilities Report: Captures consumption of water, air, gas, electricity and steam (WAGES)

Dashboard Report: Conveniently display a dashboard of multiple Power Xpert Software systems using MicrosoftT Bing Maps along with geographical location and active alarms. Pins on map indicate exact system location

Baseline Comparison Report: Compare energy against a baseline organized by end use. Verify that the building’s energy systems are installed and calibrated, and that they perform according to, for example, LEED requirements. Print reports to support LEED certification

Power Quality Report: The distribution and trend for amps, volts and THD according to user-defined date/time ranges and facility hierarchy location

Branch Circuit Monitoring Report: Determine branch circuit loading levels at a glance with color-coded graphics indicating loading status against capacity. Redundant sources can be reviewed as well as single source loads

Capacity Summary Report: The summary of top- and bottom-loaded circuits as well as loading details for each circuit according to user-defined date/time range and facility hierarchy location

Event Summary Report: Provides a Pareto chart of events according to user-defined date/time ranges and facility hierarchy location

Greenhouse Gas Report: Captures the six offensive greenhouse gasses (carbon dioxide, sulfur dioxide, nitrogen oxide, mercury, methane and nitrous oxide) broken down by selected locations within a facility

Joint Commission Report: Standard Joint Commission–compliant report supports hospital power test requirements. Checks events, key metrics of generators and automatic transfer switches (ATS) during generator testing at user-defined date/time ranges and facility hierarchy location

Custom Reports: Create custom reports with user-selectable or virtual attributes using complex formulas to display custom data in a report

Excel integration enables further analysisPower Xpert Reporting provides you with a wealth of detailed information about your power distribution systems locally or around the enterprise network. Built-in report templates provide you with everything you need. However, if you are a power user and need to generate custom scenarios, crunch numbers in a different way, or create tailored reports and charts, then our Microsoft ExcelT integration feature is right for you. Power Xpert Reporting lets you open report data directly in Excel for any kind of further analysis you deem necessary.

Use your Web browser—no client software to installThere is no need to install a “fat” client on your computer system. With Power Xpert Reporting, you can easily configure and run reports from anywhere on the network using your standard Internet ExplorerT Web browser.

Connect to multiple databases simultaneously The Power Xpert Reporting engine can effortlessly communicate with multiple Power Xpert and ForeseerT software installations simultaneously. You can easily point Power Xpert Reporting to gather information from your local database and/or multiple data-bases across the network, around the nation or around the world.

Power Xpert Reporting is very flexible. It can be installed on the same computer system hosting the Power Xpert or networked software, or it could be running on an entirely separate computer system. This enables easy integration into your current IT environment using existing infrastructure and investments.

Reports e-mailed automaticallyOnce you have selected the devices from which you want to pull information and selected the report template, you can run the same report repeatedly whenever you see fit. Or you may want to schedule Power Xpert Reporting to run the report automatically and send you a refreshed report via e-mail every day, every week, every month or at any predefined interval you select.

There is no need to install a “fat” client. Power Xpert Reporting runs in your standard Web browser.

Energy Summary Report

The summary of consumption (kWh) and demand (kW) for a user-defined date/time range and facility hierarchy location.

1 Summary of total energy consumption and peak demand per facility/location to track energy consumption by the hour.

2 Track and compare demand: Identify demand anomalies for a facility. Why is there a difference; should or can it be mitigated?

3 Compare totals side by side and identify savings opportunities: “East campus energy-saving investments are really kicking in.”

1

2

3

Energy Cost Allocation Report

The total energy bill dollar value or a cost per kWh across a facility hierarchy for a user-defined date/time range.

1

2

3

4

1How much is energy costing you? Get total kWh and costs of energy clearly in dollars and cents.

2 Allocate costs between departments and facilities: Distribute costs based on power and energy usage.

3 Let Power Xpert Reporting do the math: Formulas add up consumption and costs.

4 Determine which facility is frugal and which one consumes the lion’s share: Miniature pie charts, in addition to numbers, help show the big picture at a glance.


Data Center Efficiency Report

A summary of data center infrastructure efficiency and power usage effectiveness, including such information as temperature and humidity, and energy consumption.

1 Automatically calculates DCiE and PUE: Understand and track how efficiently your data center is running and how effective your improvement efforts have been using these industry-standard efficiency metrics.

2 At-a-glance temperature and humidity readings: Is your facility running too hot and wasting energy? Easily understand these important metrics through daily bar graphs.

3 Determine IT vs. non-IT energy consumption: See IT consumption vs. consumption in other areas of the facility in easy-to-read, day-by-day line and bar charts.

1 2

3

Utilities Report

Understand and track your utilities (water, air, gas, electricity, steam) consumption, and how effective your improvement efforts have been, with day-to-day bar and line charts.

1Quickly see your totals: Understand and track your utilities consumption and how effective your improvement efforts have been.

2Utilities usage per day bar graphs: Quickly compare and contrast daily utility usage to understand fluctuating needs and consumption.

3Cost planning with daily information: Knowing your day-by-day utility usage can not only assist in cost planning, but in bill verification as well.

2

3

1


PXS Dashboard

Conveniently display a dashboard of multiple Power Xpert Software systems using Microsoft Bing Maps along with geographical location and active alarms. Pins on map indicate exact system location.

1 Display a Dashboard of multiple PXS systems with location, active alarms.

2 Clickable Web links to PXS systems.

1

2

1

2

Baseline Comparison Report

Compare energy against a baseline organized by end use. Verify that the building’s energy systems are installed and calibrated, and that they perform according to, for example, LEED require-ments. Print reports to support LEED certification.

ote:N The Dashboard is conveniently available from within PXS and the WindowsT Start menu.

1 Compare actual energy values against a baseline.

2 Can have an End Use category and a subcategory, for example, Lighting Exterior– Lighting Interior.Put your buildings on the map

and get them LEED certifiedPower Xpert Reporting provides a geographical mapping capability, enabling you to view your PXS and Foreseer installations around the nation, at a glance. Furthermore, you can see each building site’s current alarms and status indicated by a color-coded map position pin. The physical location of your building can be conveniently viewed using the Bird’s Eye View functionality.

LEED certification affords you several benefits including government incentives, marketing benefits and increased productivity. The Baseline Report provides supporting documentation for LEED certification with comparison reports of actual measurements vs. desired baselines. To aid one-to-one comparisons, Power Xpert Reporting can normalize data based on environmental, size and other variables.


1

2

3

4

5

Branch Circuit Monitoring Report

Determine branch circuit loading levels at a glance with color-coded graphics indicating loading status against capacity. Redundant sources can be reviewed as well as single source loads.

1 Color-coded graphics alert you to potential issues: Red and orange are used to indicate areas of concern when closing in on branch circuit overloading.

2 Key parameters are clearly indicated in kVA, kW and amps.

3 Power graphs draw attention to trends immediately: Quickly pinpoint hourly power usage trends. Why do sudden increases or decreases occur at certain times?

4 Review and understand side balances per phase: Understand how well balanced your system is.

5 Color-coded bar charts point out trend variations per phase: Is there out-of-standards activity? What is the nature of the abnormality?

Power Quality Report

The distribution and trend for amperes, volts, THD according to user-defined date/time range and facility hierarchy location.

1 Pareto chart points you in the right direction: The chart clearly displays the relative significance of readings, helping you to focus on what is important.

2 Identify power-consumption patterns: Cross-reference current with time and discover consumption patterns for potential savings opportunities.

3and4Statistical analysis of current and voltage: Get minimum, average, maximum and standard deviation analyzed automatically.

1

2

3

Current View

1

4

3

Voltage View


45

1 Review five top-loaded circuits at a glance: Avoid unscheduled shutdowns due to circuit overloading. Use information for capacity planning.

2 Check minimum, average and maximum loading at a glance: Identify and mitigate abnormal activity. Is this normal volatility or not?

3 Review five bottom-loaded circuits at a glance: No-load losses are primary contributors to data center electrical costs.

4 Review circuit utilization at a glance: Check on minimum, average and maximum circuit utilization.

5 Understand hourly trends at a glance: Detect abnormal trend activity. Understand power usage patterns.

1 2

3

Capacity Summary Report

The summary of top- and bottom-loaded circuits as well as loading details for each circuit according to user-defined date/time range and facility hierarchy location.

Event Summary Report

Provides a Pareto chart of occurred events according to user-defined date/time ranges and facility hierarchy location.

1 Pareto chart points out most affected locations and devices: The chart clearly displays the relative significance of locations and devices, helping to focus on what is important; for instance, putting in SPD systems for the Chiller Plant would maximize the total reduction of power quality problems.

2 Identify the worst offender: Review which events reoccur, causing the most problems. Ranking provides a clear hierarchy for mitigation opportunities.

3 Identify event type: In conjunction with the Power Xpert Meters, easily identify the event as a transient, sag, swell or other power event. Also identify the level of severity.

4 Identify power problem time patterns: Is there a pattern to when power quality or certain events hit? Are some months and times worse than others? Do precautions or mitigating actions need to be put in place?

1 2

3

4


Greenhouse Gas Report

Captures the six offensive greenhouse gasses (carbon dioxide, sulfur dioxide, nitrogen oxide, mercury, methane and nitrous oxide) broken down by selected locations within a facility.

1 Who’s the biggest gas emitter? See the consumption breakdown by selected locations.

2 What’s my total? Fast access to greenhouse gas consumption for all locations.

1

2

Joint Commission Report

Generate a standard Joint Commission–compliant report. Check events, key metrics of generators and automatic transfer switches (ATS) during generator testing at user-defined date/time ranges and facility hierarchy location.

1

2

3

1 kVA and kW statistics are automatically calculated: Display and report on minimum, average and maximum kVA and kW readings during the generator test.

2 Line graph is plotted for quick trend analysis: Review the trend for generator readings during the test.

3 Check on generators’ vital statistics and trends: Review the trend of generator coolant, oil temperatures and engine RPMs in addition to usage times (if available).


Custom Reports

Create custom reports with user-selectable or virtual attributes using complex formulas to display custom data in a report.

1

2

3

Eaton’s Power Xpert custom reports offer users flexibility to create their own reports tailored to address special reporting needs such as calculating virtual device measurements or reporting details not available in the standard reports.

Virtual devices are typically created by users to calculate data input derived from existing real-world devices such as water, air, gas, electricity, steam and environmental measurement systems.

Typical custom report applications

• Health care emergency power qualification and test reports

• IT data center efficiency and environmental reports

• Custom phase and load balancing reports

• Campus energy savings competition reports

• Virtual device and virtual attribute reports

1Name and make custom reports appear in the available reports list.

2 Create custom reports with user-selectable attributes.

3 Support for PXS Virtual Attributes: Create basic and complex calculations, formulas to be displayed in custom reports.


Installation and integration Power Xpert Reporting installation requires administrator-level privileges to the computer systems used for installation. The Quick Start Guide accompanying the Power Xpert Reporting DVD includes clear, step-by-step instructions for successfully completing installation. During the configuration phase, the user will define which Power Xpert and Foreseer software installations will be used to pull data into the Power Xpert Reporting engine. These settings can be easily changed later on, post installation.

Deployment Utility validates and fixes issues automaticallyThanks to the Power Xpert Reporting Deployment Utility, all key setup requirements are automatically validated.

If any of the prerequisites are not met or are incorrectly configured, the Deployment Utility will alert the user to resolve the situation.

The best feature of the Deployment Utility is that it actually has a button the user can click to fix the discovered problem.

Connect to multiple databases simultaneouslyPower Xpert Reporting can effortlessly communicate with multiple Power Xpert and Foreseer software installations simultaneously. During configuration, the user will indicate which databases are available for pulling data.

Power Xpert Reporting is very flexible. It can be installed on the same computer system hosting the actual Power Xpert or Foreseer software, or it can be running on an entirely separate computer system. This enables easy integration into the current IT environment, using the existing infrastructure and investments.

The Power Xpert Reporting Deployment Utility helps get the system set up correctly. If the utility discovers a problem, it will actually offer to fix it.

Power Xpert Reporting is flexible and can either be installed on the same computer system hosting Power Xpert or Foreseer software, or be running on a separate computer system.

PXR installed on Separate Server

Power Xpert Software or Foreseer

Windows Server 2003 / XP ProfessionalSQL Server 2005SQL Server Reporting ServicesIIS, ASP.NET

PXR databasePXR reportsPXR Administration UtilityPXR Web site

Windows Server 2003 / XP ProfessionalSQL Server 2005SQL Server Reporting ServicesIIS, ASP.NET

PXR databasePXR reportsPXR Administration UtilityPXR Web site

PXR installed on a Single Server

Power Xpert Reporting resides on the same server as Power Xpert Software (PXS) or Foreseer

Power Xpert Reporting resides on a separate server apart from Power Xpert Software (PXS) or Foreseer

Host Servers running Power Xpert Software or Foreseer

Data CollectionPower Xpert Meters,

Gateways, PowerNet and third-party devices

Power Xpert Reporting (PXR)Typical Configuration Examples

Data CollectionPower Xpert Meters,

Gateways, PowerNet and third-party devices

Power Xpert Reporting can draw information from multiple Power Xpert and Foreseer software databases. A multitude of Eaton and third-party devices can be supported for reporting data.

Foreseer Software(1 or more instances)

Third-Party Devices, non–Power Xpert Devices

Power Xpert Software(1 or more instances)

4CR DataAcquisitionEngine

Power Xpert Devices (Meters, Gateways, Other)

Power Xpert Reporting

Device Aggregators (PowerNet, Gateways )


Features and benefitsFeatures Benefits

GeneralWeb browser user interface You do not need to install a separate client piece of software on your computer. Simple and easy access via

Web browser.Report categorization: Capacity, Energy, Power Quality, Reliability

Reports are clearly organized and assigned to these four top-level categories. Quickly find the information you are looking for.

Reporting Deployment Utility The Deployment Utility takes the guesswork out of checking that Power Xpert Reporting is correctly installed, including workgroup, firewall and database connections settings. The utility can automatically fix most of the problems detected.

Report archiving Archive reports by saving them as files on the local computer or network server.Ability to run reports on a predefined schedule Reports can be scheduled to run at predetermined intervals.Download new report templates from the Web Conveniently download new reports from Eaton’s website when they become available.Crisp charts and graphs embedded into reports Reports are easy to read and interpret at a glance with embedded color-coded graphs and charts.Installation support and turnkey installation are available via Eaton Services (1-877-ETN-CARE)

Eaton can provide a full turnkey installation of the Reporting Software if necessary. In configurations that involve multiple servers, clients and databases spread around the network, it is convenient to have Eaton do the installation.

Analysis

N+1 and single-source electrical power capacity analysis Understand how much power capacity reserves you have.

Power consumption pattern detection and analysis Identify potential power gluttons; understand where power is consumed and patterns of usage.

Electrical power costs allocation and analysis Review your electrical power costs in dollars and cents; allocate costs according to usage.

Long-term power quality trend analysis Understand current, voltage and harmonic power quality event patterns, and reoccurrence trends, over time.E-mail

Reports e-mailed directly from software No e-mail client software is necessary.

E-mail subscription functionality Subscribe to any reports and receive them automatically when they are run.

E-mail scheduling Schedule reports to run at specific times. Automatically receive report e-mails promptly at predefined intervals.Export and Integration

Multiple database access support Power Xpert Reporting supports communications with multiple Power Xpert Software or Foreseer database installations.

Report exporting to Excel, XML, CSV, PDF formats Easily export reports to other applications (for example, Excel) for further analysis.

Extended Excel spreadsheet support Open report files directly in Excel.Report Templates Built Into Software

Baseline Comparison Report Compare energy against a baseline organized by end use. Verify that the building’s energy systems are installed and calibrated, and perform according to, for example, LEED requirements. Print reports to support LEED certification.

Branch Circuit Monitoring Report Capacity info with understanding of redundant sources. Determine circuit loading levels at a glance with color-coded graphics indicating loading against capacity.

Capacity Summary Report The summary of top- and bottom-loaded circuits as well as loading details for each circuit according to user-defined date/time ranges and facility hierarchy location.

Custom Reports Create custom reports with user-selectable or virtual attributes using complex formulas to display custom data in a report.

Dashboard Report Conveniently display a dashboard of multiple Power Xpert Software systems using Microsoft’s Bing Maps along with geographical location and active alarms. Pins on map indicate exact system location.

Data Center Efficiency Report A summary of data center infrastructure efficiency (DCiE) metrics and power usage effectiveness (PUE), including temperature and humidity.

Energy Cost Allocation Report The total energy bill ($) dollar value or a cost per kWh across a facility hierarchy for a user-defined date/time range.

Energy Summary Report The summary of consumption (kWh) and demand (kW) for a user-defined date/time range and facility hierarchy location.

Event Summary Report Provides a Pareto chart of occurred events according to user-defined date/time ranges and facility hierarchy location.

Greenhouse Gas Report Captures the six offensive greenhouse gasses (carbon dioxide, sulfur dioxide, nitrogen oxide, mercury, methane and nitrous oxide) broken down by selected locations within a facility.

Joint Commission Report Generate a standard JCAHO-compliant report to support hospital power test requirements. Check events, key metrics of generators, automatic transfer switches during generator testing at user-defined date/time ranges and facility hierarchy location.

Power Quality Report The distribution and trend for amps, volts, THD according to user-defined date/time ranges and facility hierarchy location.Utilities Report Understand and track your utilities (water, air, gas, electricity, steam) consumption, and how effective your

improvement efforts have been with day-to-day bar and line charts.Documentation

Quick Start Guide All you need for installation and getting started with running standard reports.

Administration Manual Detailed information and instructions on how to administer Power Xpert Reporting.

ote:N These specifications are subject to change without notice and represent the maximum capabilities of the product with all options installed. This is not a complete feature list. Features and functionality may vary depending on selected options and product model. Please refer to the technical data sheet and the User Manual for detailed specifications.


Hardware

• PC with a 2.8 GHz dual core processor

• 1280 x 1024, 16-bit color SVGA monitor

• 2 GB of RAM (4 GB if running on the same server as Power Xpert Software)

• Additional 1 GB of memory if running within a virtual machine

• DVD-ROM drive

•

Software

Required: Power Xpert Software Professional or Enterprise Edition v. 2.1 or higher or Foreseer software v. 5 or higher

• OS Platforms

• Microsoft Server 2008

• Microsoft Server 2008, Release 2

• Microsoft Windows 2003 Server

• Microsoft Windows 2003 Server, Release 2

• Microsoft Windows XP Professional

• Microsoft Windows XP Professional, SP2, SP3

• Microsoft Windows 7 (Reporting Client only)

• Internet Information Services

• IIS v. 5.0 or later for Server 2003 or XP

• IIS 7 for Server 2008

• Database

• Microsoft SQL Server 2005 Standard or Enterprise Edition (SP2)

• 2008 Standard or Enterprise Edition w/ SQL Server Reporting Services

• Support for SQL Server 2008 R2

• Web Browser

• MS IE v. 7, v. 9

System requirements and order information

Power Xpert Reporting Catalog Numbering System

Catalog Number DescriptionPower Xpert Reporting PXR Power Xpert Reporting—Single Source DB connection A

PXR-2DB Power Xpert Reporting—up to 2 Source DB connections A





Power Xpert Software Professional EditionPXS-PRO Power Xpert Software Professional EditionPXS-PROn1S Power Xpert Software Professional Edition w/ 1-day startupPXS-PROn2S Power Xpert Software Professional Edition w/ 2-day startupPXS-PROn5S Power Xpert Software Professional Edition w/ 5-day startupPXS-PROnPXR Power Xpert Software Professional Edition and Power Xpert ReportingPXS-PROnPXRn1S Power Xpert Software Professional Edition and Power Xpert Reporting w/ 1-day startupPXS-PROnPXRn2S Power Xpert Software Professional Edition and Power Xpert Reporting w/ 2-day startupPXS-PROnPXRn5S Power Xpert Software Professional Edition and Power Xpert Reporting w/ 5-day startupPower Xpert Software Enterprise EditionPXS-ENT Power Xpert Software Enterprise EditionPXS-ENTn1S Power Xpert Software Enterprise Edition w/ 1-day startupPXS-ENTn2S Power Xpert Software Enterprise Edition w/ 2-day startupPXS-ENTn5S Power Xpert Software Enterprise Edition w/ 5-day startupPXS-ENTnPXR Power Xpert Software Enterprise Edition and Power Xpert ReportingPXS-ENTnPXRn1S Power Xpert Software Enterprise Edition and Power Xpert Reporting w/ 1-day startupPXS-ENTnPXRn2S Power Xpert Software Enterprise Edition and Power Xpert Reporting w/ 2-day startupPXS-ENTnPXRn5S Power Xpert Software Enterprise Edition and Power Xpert Reporting w/ 5-day startupService PacksPX-1S Power Xpert 1-day startup Service PackPX-2S Power Xpert 2-day startup Service PackPX-5S Power Xpert 5-day startup Service Pack

ANumber of supported Source Database Connections to either Power Xpert Software or Foreseer.

Ordering information

Power Xpert Reporting recommended requirements


Eaton is dedicated to ensuring that reliable, efficient and safe power is available when it’s needed most. With unparalleled knowledge of electrical power management across industries, experts at Eaton deliver customized, integrated solutions to solve our customers’ most critical challenges.

Our focus is on delivering the right solution for the application. But, decision makers demand more than just innovative products. They turn to Eaton for an unwavering commitment to personal support that makes customer success a top priority. For more information, visit www.eaton.com/electrical.

Eaton and Power Xpert are registered trademarks of Eaton Corporation.

All other trademarks are property of their respective owners.

Eaton CorporationElectrical Sector1111 Superior Ave.Cleveland, OH 44114United StatesEaton.com/pxr

© 2012 Eaton CorporationAll Rights ReservedPrinted in USAPublication No. BR02601008E / Z11751January 2012

Documents

Power Xpert Architecture Power Xpert Reporting