For Fiber Optic to LED Retrofit

Fiberstars6678 Owens DrivePleasanton, California 94588 USAT. 925.463.5520fiberstars.com FS

-PT-

0406

11

DESCRIPTION

SYSTEM

POWER TOWERREMOTE CONTROL POWER CENTER

PowerTowerPT-6000

PowerTowerPT-6000

PT-Base

Remote Control

Sold Separately

LEADING THE WAY WITH LED

PART NUMBER DESCRIPTION LIST PRICEPT-6000 Power Tower & Remote Control Unit $385.44

PT--BASE Base for Power Tower - (For new construction) $53.53FPAL-C-TR PAL Treo 12VAC, 5 watt complete underwater LED light assembly with 79' of low voltage cord. Color Light, 4 trim rings - white, black, beige and gray $318.46FPAL-C-TR-150 PAL Treo 12VAC, 5 watt complete underwater LED light assembly with 150' of low voltage cord Color Light, white ring $349.64

The new POWER TOWER has been designed specifically for the seamless conversion of an existing fiber optic pool lighting system to a LED pool lighting system. The Power Tower is a remote control power center for the PAL Treo family of lighting products.

It is powered by 120VAC and converts to 12V through two separate 30 watt transformers circuits. Each transformer can control up to FIVE Fiberstars LED products. FIVE PAL Treo’s can be operated on Circuit Number One and up to FIVE Lightstreams Laminar’s could be operated on Circuit Number Two. Circuit Number One and Circuit Number Two can be synchronized with the push of a button on the remote control unit. You can use an existing Fiberstars fiber optic illuminator base for installation.

BASE SOLD SEPARATELY

Remote Control

EASY AS 1-2-3-4STEP 1. Pull out the old lens and fiber.STEP 2. Pull in your New PAL Treo’s.STEP 3. Change old Tower to NEW LED POWER TOWER.STEP 4. Hand your customer their new wireless handheld remote.

NEW PAL TREO

Control up to 5 New PAL Treo’s on one circuit.Power Tower has two circuts total, for up to TEN Fiberstars LED products.

POWER TOWER

THE WAY WITHLEADING

LED

The ONLY Fiber Optic to LED Retrofit Power Center on the Market

Fiber Optic to LED Retrofit

For Fiber Optic to LED Retrofit

Fiberstars6678 Owens DrivePleasanton, California 94588 USAT. 925.463.5520fiberstars.com FS

-PT-

0406

11

DESCRIPTION

SYSTEM

POWER TOWERREMOTE CONTROL POWER CENTER

PowerTowerPT-6000

PowerTowerPT-6000

PT-Base

Remote Control

Sold Separately

LEADING THE WAY WITH LED

PART NUMBER DESCRIPTION LIST PRICEPT-6000 Power Tower & Remote Control Unit $385.44

PT--BASE Base for Power Tower - (For new construction) $53.53FPAL-C-TR PAL Treo 12VAC, 5 watt complete underwater LED light assembly with 79' of low voltage cord. Color Light, 4 trim rings - white, black, beige and gray $318.46FPAL-C-TR-150 PAL Treo 12VAC, 5 watt complete underwater LED light assembly with 150' of low voltage cord Color Light, white ring $349.64

The new POWER TOWER has been designed specifically for the seamless conversion of an existing fiber optic pool lighting system to a LED pool lighting system. The Power Tower is a remote control power center for the PAL Treo family of lighting products.

It is powered by 120VAC and converts to 12V through two separate 30 watt transformers circuits. Each transformer can control up to FIVE Fiberstars LED products. FIVE PAL Treo’s can be operated on Circuit Number One and up to FIVE Lightstreams Laminar’s could be operated on Circuit Number Two. Circuit Number One and Circuit Number Two can be synchronized with the push of a button on the remote control unit. You can use an existing Fiberstars fiber optic illuminator base for installation.

BASE SOLD SEPARATELY

Remote Control

EASY AS 1-2-3-4STEP 1. Pull out the old lens and fiber.STEP 2. Pull in your New PAL Treo’s.STEP 3. Change old Tower to NEW LED POWER TOWER.STEP 4. Hand your customer their new wireless handheld remote.

NEW PAL TREO

Control up to 5 New PAL Treo’s on one circuit.Power Tower has two circuts total, for up to TEN Fiberstars LED products.

POWER TOWER

THE WAY WITHLEADING

LED

The ONLY Fiber Optic to LED Retrofit Power Center on the Market

Fiber Optic to LED Retrofit