Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
T E C H N I C A L D A T A S H E E T
Technical DataNumber of stages: 2-9Operating speed: 3550 rpmCasing design pressure: 25 psigInlet connection: 8" (203mm) flange 125lb/150lbANSI drilled and tappedOutlet connection: 8" (203mm) flange 125lb/150lb ANSIdrilled and tappedSeals: labyrinth (single carbon ring available)Bearings: 6312/6312 ball, minimum L10 bearing lifeof ten years per AFBMALubrication: grease (standard) or oil (optional)Drains: 3/8 NPT with plugsImpeller diameter: 24" (610mm)Impeller tip speed: 372 ft/sec (113 m/sec)First critical speed: 4150 rpm for maximum stagesVibration: .19 in/sec maximum
AccessoriesFull line of standard and custom electrical control panelsfor packaged systems – UL and CUL Listed availableDissolved oxygen control systemFlexible sleeve connectors and expansion jointsFilters and silencersButterfly valves and check valves
Product Features
Performance Range
Performance at Standard Density(Air at 68°F, Relative Humidity of 36%, Inlet Pressure 14.7 psia) 3550 rpm
0 850 1700 2550 3400 4250 5100 5950110.3
96.5
82.7
68.9
55.1
41.4
27.6
13.8
0
FLOW RATE (m3/hr)
FLOW RATE (icfm)
161514131211109876543210
DISC
HARG
EPR
ESSU
RE(p
sig)
DISC
HARG
EPR
ESSU
RE(k
Pa)
0 500 1000 1500 2000 2500 3000 3500
Materials of Construction• Casing and heads: cast iron Class 30• Tie rods: AISI 1035 carbon steel• Interstage sealing: silicone rubber• Shaft: AISI 1144 carbon steel• Impellers: ASTM A319 cast aluminum• Base: A36 structural steel• Finish: epoxy primer with urethane topcoat• Isolation pads: synthetic rubber
The Spencer Turbine Company � 600 Day Hill Road, Windsor, CT USA 06095 � TEL 800-232-4321 � 860-688-8361 � www.spencerturbine.com
Power Mizer® Series 3500Cast Multistage Centrifugal
Blowers and Exhausters
Rugged, energy efficient multistage blowers and exhaustersThe Power Mizer® Series 3500 employs proven Spencer technologyto meet heavy-duty air and gas handling requirements at peak energyefficiency.
Spencer’s multistage centrifugal blowers and exhausters have a longtrack record of performance. The product line can be paired with Spencer’svariable frequency drives (VFD), operator interface, a variety of controlsystem options, and blower protection devices for optimum energyefficiency. It is ideal for maximum uptime in demanding environments.
Applications include petrochemical refineries/sulfur recovery; mining/flotation; chemical/combustion air or process air; and municipal andindustrial wastewater treatment/aeration.
Spencer’s specially engineered aerodynamic components mean smoother,more efficient airflow from blower inlet to discharge. The Power MizerSeries 3500 is a cost-effective solution providing long-term power savings.
Note: Specifications may vary and change without notice.º
1.00 (25.4) Isolation Pad
B
8.00(203)
26.00(660)
44.75(1137)
8.50(216)
8" OUTLET8" INLET
38.16(969)
17.66(449)
A
28.00(711)35.32(897)
Dimensions: Shown in inches / (mm)Power Mizer® Series 3500
Date:_________________________________________
Signed:_______________________________________
Customer Name: _______________________________
Customer Order No.: ____________________________
Project Name:__________________________________
Sales Order No.: ________________________________
For Customer Approval Certified Correct
TDS-814A Copyright ©2010 The Spencer Turbine Company 020110KBA1.75
The Turbine Company, 600 Day Hill Road, Windsor, CT 06095-4706
Blowers & Vacuum Systems with an Engineering Edge
TEL 800-232-4321 � 860-688-8361 � FAX 860-688-0098 � www.spencerturbine.com
Outlet Position (As viewed from outlet end)1 2 3
Inlet Position (As viewed from inlet end)A B C
Direction of Rotation
CS32
CS33
CS34
CS35
CS36
CS37
CS38
CS39
2
3
4
5
6
7
8
9
15.69
19.81
23.94
28.06
32.19
36.31
40.44
44.56
398
503
608
713
818
922
1027
1132
64
72
88
88
96
96
106
106
1626
1829
2235
2235
2438
2438
2692
2692
2130
2673
3196
3730
4263
4795
5328
5861
966
1212
1450
1692
1934
2175
2417
2659
*May vary depending on motor size
ModelNo.
No. ofStages A B*
Dimensions
inches mm inches mm lb kg
Weight(without motor)
Spencer may make improvements and dimensional changes toequipment designs based on market trends and requirements.
For product selection assistance, please [email protected] or visit our website atwww.spencerturbine.com to locate the Spencerrepresentative in your area.
º
INLET OUTLET
13.75(349)