Please join PCC and our technology partners at Oktoberfest 2016 … · 2019-09-20 · Please join PCC and our technology partners at Oktoberfest 2016 THURSDAY OCTOBER 13, 2016 PCC

www.pccweb.com/pcc-oktoberfest

1 0 . 2 4 .1 9 | W A S H I N G TO N CO U N T Y FA I R PA R K & CO N F E R E N C E C E N T E R , W I | # TA P I N TOT E C H | E V E N T S @ P CC W E B .CO M 1

www.pccweb.comwww.pccweb.com

Please join PCC and our technology partners at Oktoberfest 2016

THURSDAY OCTOBER 13, 2016PCC HEADQUARTERS - GERMANTOWN, WI

EVENT OUTLINE & COURSE OFFERINGS

www.pccweb.com

OCTOBER 24, 2019WEST BEND, WI

WWW.PCCWEB.COM/PCC-OKTOBERFEST

EVENT DETAILS & COURSEDESCRIPTIONS

http://www.pccweb.com/pcc-oktoberfest




Oktoberfest - Tap Into Technology 2019 presented by

PCC is an industrial automation, power distribution and electrical controls distributor for Siemens and other world-class technology providers, serving the Wisconsin and Minnesota manufacturing industry for nearly 40 years. From complex leading edge technologies to simple off-the-shelf control components, PCC packages a high level of local engineering support and value-add with every product sold.

www.pccweb.com

About OktoberfestJoin PCC for a full day of technical seminars, workshops, technology automation fair with hands-on product stations, one-on-one discussions with top industry experts, networking with your industry peers and a little fun. Spend the entire day or just come for lunch and tour the technology exhibits.

We look forward to spending the day with you!

To register, please visit: www.pccweb.com/pcc-oktoberfest





Event OverviewOKTOBERFEST DAY AT A GLANCE:

• Doors open at 8am • Breakfast served 8am - 10:30am• Seminars begin at 8:30am • Lunch served 11:30am – 1:30pm• 40+ exhibitors automation fair open all day• Oktoberfest reception begins at 4pm

(Music, appetizers, games & refreshments)

Location & AccommodationsEVENT VENUE: WASHINGTON COUNTY FAIR PARK & CONFERENCE CENTER Fair Park Pavilion

Free parking lot on site.

3000 Hwy PV, West Bend, WI 53095http://www.wcfairpark.com/

Suggested Accommodations:Country Inn & Suites – West Bend2000 Gateway Ct. West Bend WI 53095262-334-9400 | http://www.countryinns.com/westbendwi

Hampton Inn & Suites1975 South 18th Avenue, West Bend WI 53095262-438-1500 | http://www.westbendsuites.hamptoninn.com

Country Inn & Suites – Germantown(NEAR PCC OFFICE, 10+ minutes from venue) W188 N11020 Maple Road, Germantown, WI, 53022(262) 251-7700 https://www.countryinns.com/germantown-hotel-wi-53022/wigerman





Registration Instructions: There is NO CHARGE to attend, however registration is required at Oktoberfest - Tap into Technology 2019. To register visit www.pccweb.com/pcc-oktoberfest

IMPORTANT INFORMATION ON REGISTRATION: • If you attended Oktoberfest in 2018, you can use the same user information and “Login.” Be sure when you

login or register you choose to register as an “Attendee”

• You can elect whether you’d like to just attend Oktoberfest, or if you’d like to create a customized semianr and workshop course schedule.

• Select YES to create a schedule and select the seminars or workshops you wish to attend.

• Your registration confirmation email will be sent from the name “PCC 2019 Oktoberfest” and may be blocked by your SPAM filter, and in your “Junk” or “Clutter” folder. Please check these folders if you don’t receive confirmation after registration is complete. Note: It may take up to an hour for your confirmation email to be received.

• Workshop & Seminar selection will be open until two days prior to the event. Select your classes as soon as possible as workshops have a limited number of seats available and are first-come, first-served.

• Please only register once. If you need to make changes use the “LOG IN” button not the register button.

• If you make changes to your course schedule, be sure to click to have changes apply.

OCTOBER 24, 2019www.pccweb.com





Oktoberfest Happenings

VIRTUAL REALITY BOOTH EXPERIENCESBOOTH OPEN 2PM - 7PM (SPONSORED BY SIEMENS)

Virtual reality (VR) is one of hottest technologies on the market. Everywhere you turn people are talking about virtual reality and how much fun it is to experience. With all the buzz surrounding virtual reality, we’ve decided to bring it Oktoberfest. We hope you’ll enjoy the Room Scale and 360 experiences!

SIEMENS TECH CAFECAFE OPEN 8AM - 5PM

The Siemens Tech Café provides a hands-on opportunity to discover how the Siemens Digital Enterprise complements Modernization for Smart Manufacturing.

Stop by for coffee, bakery, afternoon German-style pretzels and test-drive the common engineering tasks on Siemens hardware and software products including: Motion Control, Factory Automation, Control Products, and Industrial Networking.

OKTOBERFEST RECEPTION4PM - 7PM

After a day full of learning, the post event reception is a great time to catch up with your peers, PCC and our vendors for a little fun including food, beverages, games, and raffle drawings.

Attendees will turn in their technology passports / surveys to receive their official Oktoberfest stein to use when the beer is tapped.

BAGS TOURNAMENTFOLLOWING RAFFLE DRAWINGS AT 5 PM

Part of off the PCC Oktoberfest festivities is the traditional Bags/Cornhole tournament. Two person teams will compete in a double elimination format until a champion is crowned.If you would like to participate but do not have a partner we will team you up with another person.

Sign up for the bags tournament at the front reception desk.





SeminarsS1 | Human Machine Interface is Changing Presented by: Siemens TIME: 8:30 AM – 9:20 AM ROOM #: 112

Digitalization is changing everything, including your HMI solutions. Your next generation HMI must help you enable and support Web Technologies, Scalability, Cloud and Edge computing, as well as local trends and control. See how Siemens SIMATIC HMI will address these changes with a single unified HMI system from visualization to vertical integration.

S2 | What’s New from Siemens Automation: PLC & I/O Innovations 2019 Presented by: SiemensTIME: 9:30 AM – 10:20 AM ROOM #: 112

Back by popular demand! Siemens will present the latest PLC & I/O product innovations, highlighting their best-in-class features. Attendees will get a glimpse of the TIA Portal roadmap that includes Multi-User, Openness, and the new features in V16. You will also be introduced to the S7-1500 R/H Redundant System.

S3 | What’s New from Siemens Automation: HMI & SCADA Innovations 2019 Presented by: SiemensTIME: 1:30 PM – 2:20 PM ROOM #: 112

Siemens will present the latest HMI & SCADA product innovations, highlighting their best-in-class features. Come hear about the latest advances and get a peek at the roadmap for the upcoming year. This session will include TIA Roadmap on: HMI, SCADA, WINCC Unified, and IPC.

S4 | Future-Focused Automation for the Digital EnterprisePresented by: SiemensTIME: 2:30 PM – 3:20 PM ROOM #: 112

Join us for an interactive discussion about automation and the digital enterprise. Whether you are replacing components in an existing system or investing in a future focused complete solution, Siemens has the technology, expertise, and support to customize a solution that can transform your organization into a Digital Enterprise.

S5 | Cyber Security for Automation SystemsPresented by: SiemensTIME: 3:30 PM – 4:20 PM ROOM #: 112

Cyber-attacks on the automation infrastructure of facilities in the United States are real. Securing the automation infrastructures can be a difficult task and is more difficult on aging infrastructures that have no cyber security features and those that are running with operat-ing systems that have become obsolete. Some customers believe that their IT departments can adequately protect these automation infrastructures. But what happens when the IT protection fails or the saboteur is able to bypass the surrounding network and connect direct to the automation system? At that point it is the responsibility of the automation system to protect itself against unauthorized ac-cess, against malware, against theft of critical software algorithms, and against unauthorized modification. Additionally, the automation system must be able to detect that it has been modified, detect intrusion, and report cyber activity.Modern automation products have implemented automation cyber protection properties. Some techniques have been proven to protect aging infrastructures. This seminar describes the implementation of these protection techniques and how they apply to new and aging application deployments.

Course Offerings & Schedule





S6 | Machine Safety Seminar Presented by: Pizzato USATIME: 8:30 AM – 9:20 AM ROOM #: 114

Learn about the benefits of proper machine guarding to protect your employees while reducing your company exposure to liability. The objectives include:

• Understanding the current regulations, ratings and guidelines (ANSI, OSHA, ISO, PL, SIL etc.)• Show how safety and production concerns can work together• Discuss methods of reducing machine downtime• Reduce liability by implementing up-to-date safety programs• Discover new and better methods of protecting employees and equipment

S7 | How to Commission and Troubleshoot Ethernet and PROFIBUS Networks Presented by: SoftingTIME: 9:30 AM – 10:20 AM ROOM #: 114

Is uptime important to you? 80% of industrial network problems are cable related. Learn about the latest diagnostic tools for qualify-ing cable installations and troubleshooting network problems. Best practices for Ethernet, PROFINET and PROFIBUS networks will be covered.

S8 | Got 10 Seconds?? See what used to take 10 years to master be accomplished in 10 secondsPresented by: TOSIBOXTIME: 10:30 AM – 11:20 AM ROOM #: 114

In this session, Tosibox will teach you how to set up a true multi-factor authentication system for remote access, data collection, and control using their patented method. ”If a tourist can fly across oceans without knowing anything about airplanes, why can’t people enjoy the benefits of technology without having an IT degree?” - Veikko Ylimartimo, Tosibox founder.

S9 | Linear Servo motors – Electricity vs. Air Presented by: LinMotTIME: 12:30 PM – 1:20 PM ROOM #: 114

What is a linear servo motor and how does it work? We will discuss how electric linear servo motors are used in assembly and manufac-turing today, along with the major savings in energy a linear servo motor provides over an air cylinder. Examples will be provided on how a LinMot linear servo motor can have a payback of one year or less when replacing air cylinders in higher cycle rate applications.

S10 | What is Industrial Excel? Reports with the least amount of effort and $$$ Presented by: SyTechTIME: 1:30 PM – 2:20 PM ROOM #: 114

Producing reports and dashboards from the vast array of Siemens data such as PLCs, IoT devices, historians and alarms should be easy and within reach. This session will demonstrate how Industrial Excel will automatically produce and distribute custom workbooks in no time, using your existing knowledge.






S11 | MACHINE SAFETY - Ways to make your machine environment safe! Presented by: Leuze ElectronicTIME: 2:30 PM – 3:20 PM ROOM #: 114

The smart sensor people of Leuze electronic are specialists in machine safety. Let us help you become more familiar with the concepts of machinery safety, the risk assessment process, new standards, and how to address them.

S12 | Simplify NFPA 70E Code & Reduce Maintenance Downtime using Meltric DecontactorTM Series PlugsPresented by: MeltricTIME: 3:30 PM – 4:20 PM ROOM #: 114

Learn how you can eliminate arc flash, achieve NFPA70E “normal operation”, and simplify your Lock Out/Tag Out procedures with the benefit of plug and play capability on motors, pumps, process equipment and temporary power.

S13 | Simulate with PLCSim and HMI Simulator to shorten commissioning timesPresented by: PCCTIME: 9:00 AM – 9:50 AM ROOM #: 119

Learn how to shorten development and commissioning times by utilizing the Siemens PLC and HMI simulation capabilities within the TIA Portal environment. Test PLC logic and HMI functionality in the software simulator. Learn about expanded PLCSim capabilities with the NEW PLCSim Advanced option introduced with V14.

S14 | Siemens HMI – Did you know you could do this?Presented by: PCCTIME: 10:00 AM – 10:50 AM ROOM #: 119

Tips and tricks for Siemens HMI developers will be offered. Learn about Design Styles/Sheets and Faceplate concepts for creating your own custom objects with events and properties. We will also introduce advanced editing capabilities that will make you more efficient.

S15 | TIA Portal 1200/1500 PLC Advanced TopicsPresented by: PCCTIME: 1:00 PM – 1:50 PM ROOM #: 119

Be introduced to Online and Diagnostic Functions for DB’s, PLC Memory Structure, and Advanced Monitoring. Become acquainted with new monitoring capabilities, enhanced cross reference features of V15.1, and more.

S16 | Take your HMI to the next level with Advanced FaceplatesPresented by: PCCTIME: 2:00 PM – 2:50 PM ROOM #: 119

Learn advanced capabilities of HMI Faceplates such as passing in user PLC Data Types as a structure with the S7-1200/1500. Also learn about project and global library type management.






S17 | Programming with Structured Control Language (SCL) in TIA Portal with S7-1200/1500Presented by: PCCTIME: 3:00 PM – 3:50 PM ROOM #: 119

Learn about programming with SCL and how you can mix with typical ladder logic. The SCL language is very powerful and well suited for complex math operations, data handling with arrays, and string processing. SCL is a high-level text-based language that is easy to understand, yet provides many benefits over traditional ladder programming. This seminar will provide the foundation for you to start programming in SCL.

S18 | Is your plant or machine vulnerable to Cyber Attack? What can you do minimize your risk?Presented by: SiemensTIME: 9:00 AM – 9:50 AM ROOM #: 120

Cyber security is a daunting topic that is critical for those responsible for automation to understand and manage. This seminar focuses on product/system functions that can be utilized to increase your security on a plant or even machine level.

S19 | Cleaning up your Power System - How Harmonics and Distortions are Affecting your Facility.Presented by: TCITIME: 1:00 PM – 1:50 PM ROOM #: 120

Overheated motors, nuisance circuit breakers tripping, overheated transformers, VFD problems – these are just some of the issues that harmonics can cause. But what are harmonics and what can be done to prevent these issues? Let us step you through the basics of har-monics and what solutions are available to correct harmonics and protect your drives.

S20 | SIMATIC Real-time Locating Systems (RTLS) – Adding precise, real-time positioning to your assetsPresented by: SiemensTIME: 3:00 PM – 3:50 PM ROOM #: 120

While plants and factories have long used deterministic communication networks to gather sensor data and close the loop within manu-facturing processes, the real-time location of assets, tools, people, and in-process inventory is often uncertain. As the production process becomes more intelligent, knowing the location of assets has become an increasingly critical puzzle piece to optimize efficiency, visibility and worker safety. This presentation will provide a highlight overview of RTLS technology, spotlight applications, and how RTLS interfaces with the entire SIMATIC solution: PLC, PC, TIA, and MindSphere.

S21 | What’s New in Siemens Industrial ControlPresented by: SiemensTIME: 10:00 AM – 10:50 AM ROOM #: 118

Learn about the latest in Siemens Industrial Controls for 2019. Check out the latest product introductions including SIMOCODE Pro V PN GP, ET200SP Motor Starters, SIRIUS ACT Pushbuttons with PROFINET, 3VA Circuit Breakers with integrated power metering, and our latest 3RW5 Soft Starters.






S22 | Rapid Multi-Axis Motion Development with Siemens LibrariesPresented by: DMCTIME: 2:00 PM – 2:50 PM ROOM #: 118

Developing motion projects from scratch can be a time-consuming and complex task. Nearly thirty basic motion control blocks exist and navigating through them can be arduous. Siemens motion library blocks allow you to quickly develop motion projects by combining the relevant basic motion control blocks into a function which provides comprehensive functionality for a specific axis type. Up to 15 commonly used function blocks get wrapped into one for rapid development and robust control. Come learn how to efficiently build a multi-axis motion project from the ground up and explore useful blocks like LAxisCtrl, LCamHdl, and LDrivSafe.

S23 | Advanced Motion Control with Starter: Efficient, Flexible, ScalablePresented by: DMCTIME: 3:00 – 3:50 PM ROOM #: 118

SINAMCIS G and S Series Drives are a powerful and versatile platform, capable of performing a variety of motion tasks. The latest hard-ware includes onboard IO, PID functionality, and even logic within the drive. We will present these advanced features utilizing practice applications. Learn how to create on-board interlocks, write drive executable scripts, configure custom parameter views, and use cases for remote maintenance. Expect to walk away with usable example code.

S25 | What’s New with Siemens Motion ControlPresented by: SiemensTIME: 3:30 PM – 4:20 PM ROOM #: 117 Join Siemens for a summary of recent and upcoming product introductions and enhancements in SINAMICS Variable Speed Drives, SIMOTICS Motion Control Motors, and Engineering Tools. Products and tools will be introduced to decrease machine development time, reduce system hardware accessories, raise machine reliability, and achieve energy savings.






Workshops

W1 | Drive-Based Safety Integrated Presented by: SiemensTIME: 9:30 AM – 11:20 AM ROOM #: 117

This event will educate the attendees on the benefits and utilization of Siemens drive-based Safety Integrated technology. It will convey the many benefits of Safety Integrated, focusing on providing a safer working environment, increased productivity, and reduced imple-mentation costs.

W2 | Motor Control Fundamentals Presented by: SiemensTIME: 12:30 PM – 2:20 PM ROOM #: 117

Learn about the full spectrum of motor control technology, including guiding standards and best practices. Topics covered will include motor branch and control circuit diagrams, NEMA and IEC standards, and motor management systems. The workshop will also include a hands-on wiring lab to further reinforce the topics covered and demonstrate the ease of use of Siemens control products.

W3 | HMI WorkshopPresented by: SiemensTIME: 9:30 AM – 11:20 AM ROOM #: 116

At this interactive hands-on workshop, you will get an opportunity to explore capabilities of the SIMATIC Basic and Comfort HMI Panels. We will discuss interfacing with Rockwell PLC’s, faceplates and library objects, trending and alarms, along with other WinCC features available within the TIA Portal.

W4 | 1200F Safety Workshop Presented by: SiemensTIME: 12:30 PM – 2:20 PM ROOM #: 116

At this interactive hands-on workshop, you will get an opportunity to explore extended capabilities of the SIMATIC S7-1200F basic safety controller. Better understand how to transition from safety relays to Safety PLC’s. Earn your customer’s trust and confidence by transi-tioning to a more flexible and optimized safety solution.


RESERVE YOUR FREE SPOT! REGISTER AT:WWW.PCCWEB.COM/PCC-OKTOBERFEST


http://pccweb.com/pcc-oktoberfest




Siemens & PCCPCC is the Siemens distributor in Wisconsin for the Automation, Drives and Service business units of the Industry business sector and has a long history. In 1981 PCC became a Texas Instruments’ (now Siemens Industry) distributor for Wisconsin. During our 30 year relationship, we have been nationally recognized year after year as one of the top 10 High Value Add (HVA) distributors. About Siemens: Siemens Corporation is a U.S. subsidiary of Siemens AG, a global power house in electronics and electrical engineering, operating in the industry, energy, health-care, and infrastructure and cities sectors. For more than 160 years, Siemens has built a reputation for leading-edge innovations and the quality of its products, services and solutions.

Automation Fair Exhibitors & Sponsors:

Air Vise & WorkholdingAir-Vise and Workholding was founded on the idea that customers are the key to success.They work with customers by creating products targeting customer production inefficiencies. By heavily focusing on customer needs, Air-Vise and Workholding helps increase the production capabilities of their customers.

AMCI – Advanced Micro Controls, Inc.Advanced Micro Controls, Inc. (AMCI) is a leading U.S. based manufacturer with a global presence. AMCI industrial control products improve PLC-based automa-tion systems with specialized position sensing and motion control technology that simplifies automation and adds reliability to manufacturing processes. AMCI designs and manufactures all of their products, enabling superior quality and innovation. The company provides 24/7 technical support staff, ready to answer questions about installation, configuration and operation of all AMCI products.

AMCI designs and manufactures everything you need to easily configure a high performance, reliable PLC-based motion control system. Every product is de-signed for optimum performance and years of trouble free operation.

APLEX Technology, Inc.APLEX Technology, Inc. develops and manufactures a wide array of industrial computer products including embedded computer platforms, human-machine interfaces (HMI), and industrial monitors for factory automation, transportation, power, environmental monitoring, telecommunications, communications and medical. Standard products, customized products or OEM/ODM project service are available to meet customers’ special needs. Their SafeSide® brand includes Permanent Electrical Safety Devices like voltage indicators, voltage portals and combo units. All of these are tools that allow for maintenance and/or inspection safely from outside the electrical cabinet.

BinderBinder-USA is a subsidiary of Franz Binder GmbH & Co., a global supplier of high-quality circular connectors & cordsets. For over 50 years, Binder has been a technical leader and innovator serving the automation and medical industries. Today, Franz Binder GmbH & Co. has manufacturing facilities world-wide and a global distribution network.

Presenting Sponsor:





Carlo GavazziCarlo Gavazzi originated in Milan, Italy over 80 years ago. Carlo Gavazzi has been at the forefront of the automation industry since their founding and as a result, their history is filled with many firsts for the industry. They focus on manufacturing and distributing a wide range of products for industrial automation and energy management.

CementexExperience, adaptability, quality and vision are the foundation of the Cementex brand of double-insulated tools and safety related products. Cementex’s contin-ued use of American tools, fabrics and labor paired with these fundamentals not only set them apart from the imitators but have also established Cementex as the trusted safety tool specialists.

Safe tools are the most important part of doing the job right–Cementex’s complete offering of American made double-insulated 1000V safety tools and personal protective equipment help you meet the requirements of OSHA, NFPA 70E and CSA Z462 standards.

Di-soricdi-soric has developed and produced industrial automation sensors for the past 30 years. Their dedication to innovation has led to a vast range of products including Photoelectric and Laser Sensors, Color and Contrast Sensors, Inclination Sensors and various Machine Lighting products. The family-owned company values their relationship with customers and serves small and medium companies, numerous vehicle manufacturers and several international companies.

Smart People. Expert Solutions.

DMC

Smart People. Expert Solutions.

DMC

« outlined version, no fonts needed

DMC DMC is a project-based engineering firm focused on software development and control systems. We develop and implement solutions for a wide range of industries using a variety of technologies and platforms. Since 1996, DMC has succeeded in helping hundreds of clients increase efficiency and productivity by delivering world-class solutions worldwide.

DMC excels at helping clients automate processes. We are a technology and services company that provides software development, engineering, and control system solutions. Our goal is to increase the efficiency and productivity of your business with world-class solutions.

Easy RoboticsEasy Robotics’ began in 2015 with the development of ProFeeder, a robot cell that is mobile, compact and automated. It assists with the efficient processing of parts within milling machines, fully automatic CNC and lathes. Easy Robotics emphasizes the importance of developing advanced machine for industrial uses

EXMEXM hosts a selection of more than 29,000 standard products some of which are unparalleled in the industry, namely the 5412 ES and 5412 ESCH series. Pioneer in enclosure design, EXM offers an innovative externally mounted ¼ turn locking mechanism. The products are made with the utmost quality and workmanship, following ISO 9001:2008 standard. EXM has also specialized in custom enclosures for over 40 years. They provide you and your projects with quality enclosures tailored to your specifications on time and all custom orders are produced as originals instead of modified standards. As well as being an innovator in the field of enclosures EXM sets itself apart from the competition by offering BOXCAD, an online service that allows users to design their own custom enclosure within EXM’s product series. BOXCAD is simple and easy to use, shortens lead times and gives the power to the customer to make revisions to BOXCAD configurations.






FiboxFibox Inc., the US division of the Finnish company, focuses on developing polycarbonate enclosure products. Since expanding to the United States in the late 1990s. Fibox has grown substantially, especially in terms of name recognition. Fibox is now dedicated to exhibiting at major trade shows.

Grace Engineered Products, Inc.In the 1990s, Grace was challenged to find a better way of safely accessing an electrical panel at a John Deere facility. The team at Grace created a solution for thru-door access, which birthed the GracePort® — a fully customizable convenience data port that allows access to live control cabinets through closed doors. It was the first product that Grace developed that keeps voltage away from workers.

GracePorts® are a foundational tool many facilities use across the globe to keep people away from voltage. GracePorts® are fully customized communication ports that allow workers to access control panels easily through closed doors.

Their SafeSide® brand includes Permanent Electrical Safety Devices like voltage indicators, voltage portals and combo units. All of these are tools that allow for maintenance and/or inspection safely from outside the electrical cabinet.

Hammond ManufacturingHammond Manufacturing is a global company with customers worldwide. High performance manufacturing equipment and continuous improvement man-agement techniques combine to enhance their reputation for quality. Ongoing efforts to differentiate themselves through high levels of service and customer satisfaction are a key corporate focus. The core products for Hammond Manufacturing are electrical and electronic enclosures, racks and cabinets, power bars and electronic transformers. Hammond offers a broad range of standard products, modification services and technical support to electrical and electronic manufacturers, utilities and institutions.

HellermannTytonOperating in over 38 countries, HellermanTyton specializes in wire protection, identification products for wire, cable and panel components and wire and cable routing solutions. The Milwaukee-based company focuses on cost-effective solutions that still allow their customers to receive high quality products.

HelmholzHelmholz aims to provide the best solutions for a wide range of automation tasks. They specialize in Ethernet Routers, PROFIBUS Standard and Diagnostic Connectors/Repeaters, Remote I/O and various S7 Modules. Their customer-focused approach ensures both domestic and international customers that they receive high quality products.

IAS We are reinventing manufacturing. Advancements in technology have enabled a rethink of how products are designed, made, processed, packaged, transport-ed, and sold. IAS is a systems integration company developing automation that brings this technology to life and enables our clients to benefit from the cutting edge in what is possible today.

Automation isn’t automatic. We have designed IAS just like a machine to deliver the best systems possible. It is our education, experience, creativity, and culture that sets us apart. The result is systems that are being leveraged by companies across the world to become more efficient, more agile, and more productive. Our four core disciplines have been created to address the unique needs of industry today. These disciplines operate in both stand alone or collaborative fashion in order to enable the highest value in each of our systems.






icotek North AmericaWherever a secure connection of machinery and equipment is required, the icotek cable management and cable entry systems are the best solution. Even in applications where extreme contamination by water, dust, vibration or extreme temperatures occur, icotek provides robust and reliable solutions.

IDEM Safety SwitchesIDEM’s range of Safety Switches provide modern cost effective Machine Safety solutions. IDEM’s team of designers, with numerous years of expertise in the safety field, continue to design and present new innovative products to the market. IDEM’s range of “Next Generation” products harness higher reliability, the latest features and are manufactured in materials to provide high durability to cope with the continually increasing demands placed on Machine Safety Devices.

iGUSFounded in 1964, igus is a worldwide manufacturer and distributor of plastic plain bearings, spherical bearings, linear guides, cable carriers and continuous-flex cables. igus employs approximately 2950 workers with locations in 35 countries and partners in another 80 countries.

JLT Mobile ComputersJLT Mobile Computers pioneered the rugged computer market, shaping it over the last 20 years by instigating and championing a level of design and manufactur-ing quality demanded by the leaders in the world’s toughest end-markets. JLT is today recognized by customers around the globe for providing the most rugged, reliable, high-performance vehicle-mount computers on the market.

LarcoLarco has been dedicated to ensuring the safety of workers, data and facilities in the industrial world since 1997. Larco’s commitment to quality ensures customers that their safety is always the number one priority.

LED2WORKThe beginnings of the commercialization of LED technology are closely linked to the beginnings of LED2WORK GmbH. The requirement of the industry for sustainable and economic lighting, as well as interest in the new technology, led to the emergence of LED2WORK GmbH in 2007.

At the beginning of professional LED lighting in particular, high and above all consistent quality, well-installed luminaires and stable casings for industrial use were in short supply. It needed sophisticated product development and the building and expansion of a reliable network of partners to produce the high quality of LED2WORK products. Today, LED2WORK luminaires are among the most reliable of products and are used in great numbers in the industrial sphere as well as for the lighting of workplaces.






Leuze electronicLeuze is a leading provider of optoelectronic sensors used to detect, indentify and protect. Their sensors offer unparalleled performance across a broad range of industries and applications. With over 12,000 products and a global service and support network Leuze has earned a superior reputation for providing high-tech-nology value added products to their customers.

LinMot USALinMot manufactures a complete line of Linear Motors, Guided Actuators, Servo Drives, and MagSpring constant force magnetic springs. We are focused on the development, production and distribution of linear motor systems for industrial applications. Our customers will receive sophisticated products which provide the utmost reliability in linear motion and can easily be integrated into their automation and control systems. LinMot linear motors provide extremely high speed, long life, complete controllability, very long strokes and peak forces to 600 pounds. Product standardization and delivery from stock through a worldwide distribution network help to support our dedication to providing immediate availability and prompt customer support.

LSIS USALSIS USA focuses on innovating Variable Frequency Drives, Electrical Power Components and various Circuit Breakers. Their heavy focus on investing in Research and Development ensures that customers receive high quality products that exceed their expectations.

MeltricMeltric Corporation’s complete line of industrial duty plugs and receptacles (including the world’s only UL and CSA switch rated plugs and receptacles) are man-ufactured in a state of the art facility in Franklin, Wisconsin. Corporate headquarters are located under the same roof as the manufacturing facility, allowing for efficient communication and coordination. As a result, many orders ship in less than 24 hours!

Mersen Mersen is a global expert in materials and solutions for extreme environments as well as in the safety and reliability of electrical equipment across industries such as energy, transportation, electronics, chemical, pharmaceutical and process industries. Mersen offers the widest range of circuit protection products in the industry for everyone from OEMs and panel builders to MROs and electrical contractors making them perfect single source supplier.

MicronMicron is the only major electrical manufacturer to focus exclusively on transformers and power supplies, making them the supplier of choice for leading OEM manufacturers around the world. They are committed to meet customer needs through specialty designs, technical support, and count with a stock inventory of over 250 catalog numbers. Product Specialties include Control Transformer Custom Manufacturing, Din Rail Power Supplies, and Buck-Boost Transformers.

MicrosonicMicrosonic is driven by the age-old knowledge that humans rely on sound to communicate information. They created multiple ultrasonic sensors for industrial purposes in the hopes that they could be used for practical uses.






On RobotOn Robot’s full line of end-of-arm tooling products including grippers, sensors, and tool changes ensures cost-effectiveness, ease of use and safety to manufac-turers. They focus on providing everything that their customers need and ensure that small and medium sized companies can continue to grow by using their products.

PfannenbergPfannenberg, Inc. is a global manufacturer of Thermal Management, Liquid Cooling Solutions and Signaling Technologies. Our enclosure thermal management products help some of the largest companies worldwide stay cool and safe, protecting and keeping electronic equipment running to avoid costly downtime.By keeping electronics in enclosures from overheating, Pfannenberg provides an invaluable service to companies, keeping their machinery and processes con-sistently operating. By developing and producing products which are designed to save energy and other resources, Pfannenberg operates by their business philosophy – Protection for man, machine and the environment.

Pizzato ElectricaA leading European manufacturer of position switches, foot switches, and safety relays, Pizzato USA possesses an unparalleled passion for quality. Their atten-tion to detail ensures that customers receive high quality products that will address their needs.

ProSoftProSoft has developed an efficient way to use production data for decision making and ensures that its products are reliable, secure, and flexible. By listening to their customer’s needs, ProSoft was able to develop technology that allows customers to use real-time data to better make decisions on how to best improve production and optimize resources.

Powerohm ResistorsPowerohm is a world-class, customer-driven manufacturer of power resistor products. The Powerohm team is committed to providing the highest value, highest quality product at attractive prices. Powerohm offers one of the broadest lines of quality power resistors in the marketplace. Their diverse selection of resistor products is sure to meet your requirements.

QlightSince its founding in 1986, Qlight has been a world-leading provider of visual and audible status indicating systems and solutions for the last three decades. They pride themselves in developing products which help customer’s improve productivity, safety, and quality control in the industrial automation and commercial industries. Their strong dedication to innovative products, quality assurance, well-established supply chain, customizable manufacturing and strong customer relationships have helped them earn the top market share in several markets. The Qlight brand reflects over 450 products and 30 years of research and devel-opment, certification, and manufacturing experience.






REMKEWith one of the largest and most diverse lines of cable connectors, cord grips and cable glands, Remke Industries has been focused on manufacturing top-quality electrical connectors, all made in the USA for over 50 years. No matter your requirements, environment or application, they have you covered with a vast inventory of connectors ready to ship all over the country. Remke’s Wire Mesh Grips provide extra strain relief to cable connections for safer, more reliable installations. Designed to provide permanent cable support without loosening their hold, Remke’s grips are built to perform.

Rex Power MagneticsRex Power Magnetics is a Canadian dry-type transformer design and manufacturing company, headquartered in Concord, Ontario (Greater Toronto Area). Since its humble beginnings in 1972, Rex has quickly emerged as a competitive and innovative supplier of high-quality CSA certified and UL listed power magnetic products for markets in North America and overseas. With over 230 employees, we offer a broad product line including custom dry-type transformers, reactors, other magnetic devices, and related components and services. We distinguish ourselves from the competition by our focus on continual product improvement, responsiveness, and customer service.

ROLLONROLLON is a leading manufacturer of linear motion systems, guides and linear actuators. ROLLON’s principal products include the Compact Rail linear guide, Telescopic linear guides and the ActuatorLINE™, and Uniline family of actuators, that are designed to meet the requirements of engineers involved in machine design applications in the primary fields of industrial automation and robotics.

SocomecSocomec’s expertise in this domain is unquestionable; the company is an undisputed leader in power switching and changeover functions, and has been a spe-cialist manufacturer of electrical equipment since 1922. The company has long defended the benefits of fuse protection for individuals and property, and has become a major player in cutting-edge technology such as the monitoring and detection of insulation defects. Socomec guarantees solutions and services which are both relevant and efficient.

SoftingSofting Industrial is a strategic partner in the industrial automation sector with more than 35 years of experience in the areas of fieldbuses and Industrial Eth-ernet. Softing Industrial develops and markets a wide range of software and hardware products for a variety of applications in every industry, from technology and data integration, through communication and infrastructure components, to network monitoring and diagnostics.

Springer Controls CompanySpringer Controls specializes in providing industrial controls as well as custom design controls to the market with shipment within 24 hours. SCC can provide electro-mechanical contactors and starters from 6 Amp to 700 Amp with electronic coils as well as wound coils. Springer also offers a complete line of solid-state contactors, soft start controls, and temperature controls using the latest electronic technology. Complementing the base product lines, we offer both 22mm and 30mm pilot-devices, DIN rail mounted terminal blocks, power disconnect switches and cam switches up to 12 steps, oil immersed switches originally designed by Rowan Controls, and crane and hoist controls including pendant stations, rotary gear limit switches and foot switches. The electronic temperature controls are designed specifically for RTDs on drives and transformer control and exceed the CE requirements of EMI and surge protection.






STOBER STOBER produces the highest quality gearboxes in the world. With over 80 years of gearing experience, STOBER is the gold standard. They build and ship in one day, complete quotes within one hour, and are available 24 hours a day, 7 days a week. Their motion control products are backed by a five-year warranty, and their power transmission products are backed by a three year warranty.

SyTechSince its genesis in 1994, SyTech has focused on building reporting software and solutions for process automation and industry. Their award-winning product, XL Reporter, offers customers access to over 70 data sources that provide efficient and cost-effective solutions. SyTech relies on automation software distribu-tors within 80 countries to distribute its products.

TCITCI, LLC is the premier supplier of peripherals for AC and DC drives and a respected partner of drive manufacturers and distributors worldwide. Our products include capacitor banks, active harmonic filters, passive harmonic filters, motor protection filters, line reactors, and other high quality products that increase the value and improve the overall system performance of power inverters.TCI provides a variety of solutions to improve power quality, reduce energy costs, extend motor life and performance and protect sensitive equipment in indus-trial applications.

TosiboxTosibox enables easy, cost-effective and secure remote access between internet connections. Tosibox gives its customers 5 reasons for choosing them. First, they offer simple products that are easy to use. Second, they deal with both legacy and future systems. Third, they offer secure, encrypted technology. Fourth, they offer their customers unlimited expandability to their network. Finally, they are unique, as they are globally recognized for providing solutions to customers.

TR Electronic TR-Electronic develops, manufactures and sells sensors and actuators for industrial applications. Products in the Rotary Encoders Business Unit with optical or magnetic scanning are required to detect the angular movement of a rotating shaft. Magnetostrictive linear encoders measure the position of a linear movement without contact, for example in a hydraulic cylinder. Intelligent compact drives from the Motion Business Unit are used as actuators or, in the high-end version, as process drives. To complement their product portfolio TR Electronic also partners to sell both the Di-soric and Microsonic lines of sensors in North America.

Universal RobotsThe idea for Universal Robots began in 2003 when its founders wanted to create a light robot that more user-friendly robot within the food industry. Officially founded in 2005, Universal Robots aimed to make robot technology more accessible to a wider range of companies. In later years, Universal Robots expands to Europe, Asia and the United States, all while continuing their initial mission from 2003.






VeloxVelox provides material handling products manufactured exclusively by Husky Rack and Wire, a family-owned company for more than 50 years. Velox focuses on creating innovative, affordable and high-quality products including Machine Guarding and Fencing.

WeintekWeintek has been a leading HMI developer their 16:9 widescreen full color HMI models, MT8070iH and MT8100i, debuted in 2009 and became had the best-selling HMI worldwide within 5 years. Weintek continuously focuses on testing their equipment thoroughly and on leading innovation within the industry.

Zero-MaxZero-Max is a leading provider of motion control solutions and one of the industry’s most trusted coupling manufacturers. We provide shaft couplings, right angle gear drives, and other precision motion control components. Our products are known throughout the world for their innovative designs, high quality, high performance, and durability.


RESERVE YOUR FREE SPOT! REGISTER AT:WWW.PCCWEB.COM/PCC-OKTOBERFEST


http://pccweb.com/pcc-oktoberfest

Documents

Please join PCC and our technology partners at Oktoberfest 2016 … · 2019-09-20 · Please join PCC and our technology partners at Oktoberfest 2016 THURSDAY OCTOBER 13, 2016 PCC