® ® HideTech PRO SYSTEM FOR larcore HONEYCOMB PANEL Hanging pieces PRO-3 and PRO-4: hanger and bracket. Typologies. Polígono Industrial de Bayas. C/ Ircio. Parcelas R72-77 - 09200 Miranda de Ebro, Burgos. SPAIN Tel.: +34 947 333 320 - Fax: +34 947 324 913 - [email protected] - www.alucoil.com JANUARY 2018 Grupo Alibérico Alucoil ® Grupo Alibérico Alucoil ® ® Alucoil DOCUMENTS ® ® ® Alucoil HideTech PRO system is a non-visible fixing system for larcore panels. Hide fixing is achieved through single pieces (hangers and brackets), machined from the same extruded aluminium profile EN AW 6060 alloy. ACCESSORIES: (1) HideFix 64090 Ø6'4x9mm Alu/A2 special rivet for fixing ® PRO-4 and PRO-4R brackets to larcore panel. DIN 933 M5x12mm A2/50 Hex head screw for accurate height regulation of the panels. It will be placed into PRO-4R bracket metric thread. DIN 7504-K Ø4'8x22mm A2/50 Self-drilling screw for dilation control installed in PRO-4R holes or slotted holes as appropriate. (1) ® HideFix 64090 Alucoil rivet could only be used for ® larcore panels which total thickness is ≥ 14mm and which aluminium skins thickness is ≥ 0'5mm. HANGING PIECES Depending on their function and position, system´s hanging pieces are the following: PRO-4: Standard bracket. Attached to the inner skin of the panel using 4 rivets, this piece would allow installation, of the panel, into the hangers. PRO-4R: Regulation bracket. Attached to the inner skin of the panel using 4 rivets, this piece allows panel installation into the hangers, height regulation and dilations control. PRO-3A: Long hanger. It is fixed to substructure profiles and links them to bracket pieces. This hanger would accommodate 2 brackets and will be placed in panel joints and central positions. PRO-3B: Short hanger. It is fixed to substructure profiles and links them to bracket pieces. This hanger will be placed in simple positions where only one bracket is required. PLACING OF PIECES (x): Fixed point (↔): Dilation point PRO-4R (↔) (x) (↔) (x) PRO-4R PRO-4R PRO-4R PRO-4 PRO-3A PRO-3B PRO-3A (x) (↔) (↔) (↔) (↔) (x) (x) 61 22.4 250 250 22.4 61 22.4 100 100 22.4 thickness=3mm PRO-4 PRO-4 PRO-3A 61 61 75 22.4 Ø6.5 22.4 61 61 75 22.4 75 Ø6.5 22.4 thickness=3mm 75 thickness=3mm

PIEZAS DE CUELGUE DEL SISTEMA Hietech PRO (ENG) · Grupo Alibérico Alucoil ® Grupo Alibérico Alucoil ® ® Alucoil DOCUMENTS Alucoil® HideTech® PRO system is a non-visible fixing

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: PIEZAS DE CUELGUE DEL SISTEMA Hietech PRO (ENG) · Grupo Alibérico Alucoil ® Grupo Alibérico Alucoil ® ® Alucoil DOCUMENTS Alucoil® HideTech® PRO system is a non-visible fixing

® ®HideTech PRO SYSTEM FOR larcore HONEYCOMB PANELHanging pieces PRO-3 and PRO-4: hanger and bracket. Typologies.

Polígono Industrial de Bayas. C/ Ircio. Parcelas R72-77 - 09200 Miranda de Ebro, Burgos. SPAINTel.: +34 947 333 320 - Fax: +34 947 324 913 - [email protected] - www.alucoil.com

JANUARY 2018

Grupo AlibéricoAlucoil

Alu

il D

® ® ®Alucoil HideTech PRO system is a non-visible fixing system for larcore panels. Hide fixing is achieved through single pieces (hangers and brackets), machined from the same extruded aluminium profile EN AW 6060 alloy.

ACCESSORIES:

(1)HideFix 64090

Ø6'4x9mm Alu/A2 special rivet for fixing ®PRO-4 and PRO-4R brackets to larcore

panel.

DIN 933 M5x12mm A2/50

Hex head screw for accurate height regulation of the panels. It will be placed into PRO-4R bracket metric thread.

DIN 7504-K Ø4'8x22mm A2/50

Self-drilling screw for dilation control installed in PRO-4R holes or slotted holes as appropriate.

(1) ®HideFix 64090 Alucoil rivet could only be used for ®larcore panels which total thickness is ≥ 14mm and

which aluminium skins thickness is ≥ 0'5mm.

HANGING PIECESDepending on their function and position, system´s hanging pieces are the following:

PRO-4: Standard bracket. Attached to the inner skin of the panel using 4 rivets, this piece would allow installation, of the panel, into the hangers.

PRO-4R: Regulation bracket. Attached to the inner skin of the panel using 4 rivets, this piece allows panel installation into the hangers, height regulation and dilations control.

PRO-3A: Long hanger. It is fixed to substructure profiles and links them to bracket pieces. This hanger would accommodate 2 brackets and will be placed in panel joints and central positions.

PRO-3B: Short hanger. It is fixed to substructure profiles and links them to bracket pieces. This hanger will be placed in simple positions where only one bracket is required.

PLACING OF PIECES

(x): Fixed point

(↔): Dilation point

PRO-4R

(↔) (x) (↔)(x)

PRO-4R PRO-4R PRO-4RPRO-4

PRO-3A

PRO-3B

PRO-3A

(x)

(↔)

(↔) (↔)(x)(x)